Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Brake Drum Manufacturing and Supply

Active

Federal

Response Deadline08/14/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture and delivery of brake drums designated by NSN 2530016165194, with strict adherence to military specifications and approved packaging standards to ensure operational readiness and compatibility with military vehicle systems. All products must meet exacting quality and performance criteria established by defense procurement protocols, and fulfillment will be subject to rigorous inspection and compliance verification prior to acceptance. Subcontracting opportunities are open under NAICS code 336360, targeting manufacturers capable of scaling production to meet defense logistics demands. The solicitation was posted on August 3, 2026, with responses due by August 14, 2026, and performance will be executed under the oversight of the Department of Defense's Land Supplier Operations Vehicle Support unit. All work must align with the designated military supply chain requirements, and no set aside provisions are specified, making this open to qualified contractors nationwide.

General Info

Manufacture and deliver brake drums per military specs, due August 14, 2026, open to qualified nationwide contractors.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

336360 - Motor Vehicle Seating and Interior Trim ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and deliver brake drums per NSN 2530016165194, compliant with military specifications and packaging standards.

Similar Contracts

Same NAICS industry code

BOX, ACCESSORIES STO

Solicitation # SPE7L4-26-T-5986

This contract, under solicitation number SPE7L4-26-T-5986, specifies the procurement of one unit of a box and accessories identified by NSN 2540017179419 and part number 24001448, with a unit price of $1.00 and a total price of $1.00. Delivery is required within 20 days FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must fully comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation, wrapping, and palletization methods, with no special marking required. Technical and quality requirements referenced through R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item must be delivered to Schaefield Barracks, HI, with the government-provided shipping and marking instructions, and transportation details follow DLAD Proc Notes C19 and C20. The contract is issued under the Department of Defense’s Combat Vehicles and Armament office, with a required delivery date of June 17, 2026, and is linked to a single point of contact at DLA for inquiries.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 18 hours ago

DEADLINE

LINER, VEHICULAR FEN

Solicitation # SPE7L5-26-T-4748

The contract solicitation SPE7L5-26-T-4748 seeks the procurement of 10 units of LINER, VEHICULAR FEN with NSN 2510-01-643-4911 at a unit price of $10.00 totaling $100.00, to be delivered FOB origin within 21 days of award, with no quantity variance allowed. The product must comply with MIL-STD-2073-1E packaging standards, including specified preservation methods, cushioning materials, and unit container types, and must be marked in accordance with MIL-STD-129 with special marking code ZZ indicating required instructional labels such as OPEN THIS SIDE and DO NOT BEND. Palletization must follow DLA Packaging Requirements, and all items must be shipped to the designated DLA Distribution facility in New Cumberland, PA. Delivery is due by September 8, 2026, though the original required delivery date was April 1, 2027. The liner includes die-cuts to maintain shape during packaging and enhance stacking strength. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with the applicable revision determined by the solicitation issue or award date. Transportation and shipping directives are governed by DLAD PROC NOTES C19 and C20, and the solicitation is managed by the Department of Defense under NAICS code 336360 with primary point of contact Bradley Evans.

LAND SUPPLIER OPNS ENGINES

POSTED

about 18 hours ago

DEADLINE

TARPAULIN EXTENSION

Solicitation # SPE7L4-26-T-5983

This contract pertains to the procurement of a tarpaulin extension with NSN 2540-01-723-0399, quantity of one unit, to be delivered within ten days of contract award under solicitation SPE7L4-26-T-5983. Delivery is FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which override any conflicting standards including ASTM D3951. Packaging must adhere strictly to DLA’s packaging requirements RP001 and MIL-STD-129 for marking and labeling, with hazardous materials packaged according to TQ requirement IP025 if identified per FED-STD-313. Ozone-depleting chemicals are strictly prohibited in the product or its manufacturing process, and any substitute chemicals must be pre-approved unless explicitly authorized. The unit of issue is each (EA), and palletization must follow DLA guidelines. The destination is W8000V, Prince Sultan Air Base, Saudi Arabia, with shipment logistics governed by DLAD Proc Notes C19 and C20. The required delivery date is July 30, 2026, and the item is intended for U.S. Forces maintenance use. The contract excludes any set-aside provisions and falls under NAICS code 336360 for defense manufacturing.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 18 hours ago

DEADLINE

Solicitation # SPE7LX-26-U-9274

This contract pertains to the procurement of tarps identified by NSN 2540-01-682-2441, with a quantity of 5 kilotons, under solicitation SPE7LX-26-U-9274, issued by the Department of Defense’s Strategic Acquisition Program Directorate. Delivery is required within 62 days FOB origin, with no variance allowed in quantity, inspection and acceptance occurring at the destination. The item must comply with all DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which supersede any conflicting specifications including ASTM D3951. Packaging must adhere to DLA-specific standards under RP001 and MIL-STD-129, with hazardous materials packaged per TQ requirement IP025 and non-hazardous materials complying with commercial packaging standards while still yielding to DLA requirements. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutes require prior approval unless explicitly permitted by existing specifications. All packaging must include proper marking and labeling per DLA guidelines, with unit of issue specified as kilotons and quantities accurately reflected. The supplier is identified as TRANSHIELD, INC. with part number 10955XTT, and all materials must be palletized in accordance with DLA packaging directives. The contract mandates strict compliance with DLA’s technical and quality standards, which prevail over any commercial or prior industry norms. The solicitation was posted on August 4, 2026, with responses due by August 19, 2026, and the NAICS code is 336360. The primary point of contact is Theodore Misiolek, reachable via email and phone provided. The unit of issue and its ANSI X12 equivalent must be referenced through the DLA-provided link, and government identification must be removed from any rejected supplies. The quoted quantity of 5 kilotons is estimated and not guaranteed for purchase by the IDC. All documentation, including packaging and labeling, must strictly follow the referenced DLA directives, with no deviations permitted unless formally approved. The contract applies to CONUS delivery under DLA direct procurement and requires full adherence to all quality, safety, and procedural mandates outlined in the DLA Master List.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 18 hours ago

DEADLINE

CYLINDER, LOCK, VEHIC

Solicitation # SPE7L4-26-T-5987

The contract pertains to the procurement of one cylinder, lock, vehicle, identified by NSN 2540-01-728-6524 and part number J-CM-99-286 from SOUTHCO INC, with a required delivery within 20 days of award under solicitation SPE7L4-26-T-5987. The item must comply with DLA’s technical and quality requirements referenced in the DLA Master List, packaging standards per MIL-STD-2073-1E and MIL-STD-129, and specific handling directives including palletization under RP001, with no tolerance for quantity variance. The product must be shipped via traceable means, not parcel post, to the designated delivery address at Fort Huachuca, Arizona, with both delivery and acceptance occurring at the destination. The contract mandates strict marking protocols, including government identification removal from non-accepted supplies, and includes detailed packaging codes, container specifications, and special handling instructions. All shipments must reference the tracking code M2131062090157 and align with the originally required delivery date of July 31, 2026. The point of contact for the contract is Anna-Rachelle Betts, and the solicitation was issued under the Department of Defense’s Combat Vehicles and Armament office, with a NAICS code of 336360.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 18 hours ago

DEADLINE

TARPAULIN EXTENSION

Solicitation # SPE7L4-26-T-5976

The contract pertains to the procurement of one unit of a tarpaulin extension identified by NSN 2540-01-723-6511 and part number 0381-940302-G, issued under solicitation SPE7L4-26-T-5976. Delivery is required within ten days of contract award, with shipment FOB origin and inspection and acceptance occurring at the destination. The item must be packaged in compliance with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951; if non-hazardous, it must meet commercial packaging standards per FED-STD-313, and if hazardous, it must adhere to TQ requirement IP025. All packaging and labeling must follow MIL-STD-129, with palletization aligned to RP001 DLA Packaging Requirements. The unit of issue is EA, with no variance permitted in quantity. The delivery address is designated for U.S. Forces at Prince Sultan Air Base in Saudi Arabia, with transportation governed by DLAD Proc Note C19 and C20. The required delivery date is July 30, 2026, and the contract was posted on August 4, 2026, with responses due by August 17, 2026. The contracting office is under the Department of Defense’s Combat Vehicles and Armament division, with Anna-Rachelle Betts listed as the primary point of contact.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 18 hours ago

DEADLINE

COVER, HEADREST

Solicitation # SPE4A5-26-T-323H

The contract pertains to the procurement of five headrest covers, identified by NSN 7290014569047 and part number 1C5040-11ACE, supplied by AMI Industries Inc. The item is classified as a critical application item and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which takes precedence over any other standards. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required in the sample lot unless otherwise stated, and critical, major, and minor attributes must be verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0. Item Unique Identification is not required per DFARS 252.211-7003(c)(1)(i). Packaging must adhere to ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization in accordance with DLA packaging requirements. The item has no shelf life constraint. Delivery is required FOB origin, with inspection and acceptance occurring at destination. The quantity is fixed at five units with zero variance allowed, and delivery must occur within 171 days from the contract date, with an original required delivery date of June 27, 2027. The unit price is $5.00 per unit, totaling $25.00. The packaging and shipping instructions specify use of the DLA designated freight address in Tracy, California, and require compliance with DLAD Proc Notes C19 and C20 for transportation. The solicitation was issued on August 4, 2026, with a response deadline of August 12, 2026, under contract number SPE4A5-26-T-323H. The primary point of contact is Francis Polakiewicz of the Department of Defense’s ASC Supplier Operations OEM Division.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 18 hours ago

DEADLINE

BOAST RFOP - FRAME, SEAT, VEHICULAR / NSN: 2540-01-414-7899

Solicitation # PANDTA-25-P-0000_026840

The U.S. Army Contracting Command – Detroit Arsenal is soliciting proposals under the Basic Ordering Agreement Sustainment Track (BOAST) program for a Firm-Fixed-Price order of 26 vehicular seat frames, identified by NSN 2540-01-414-7899 and part number 12933517, with an unexercised option for an additional 26 units. This is a total small business set-aside, and only vendors with a fully executed BOAST Basic Ordering Agreement in place by the closing date of August 24, 2026, at 1600 EST are eligible for award. The procurement is subject to strict export control requirements, necessitating that offerors hold a current DD Form 2345 certification under the Joint Certification Program to access the technical data package, which resides in SAM.gov. Proposals must be submitted electronically via email or through the Procurement Integrated Enterprise Environment, with a completed and signed pricing sheet only—no separate technical proposal is required. Evaluation will be based solely on price, with award going to the lowest-priced responsible offeror meeting all material requirements, including compliance with FAR 9.104 responsibility criteria and the BOAST BOA eligibility gate. The item must conform to CARC coating specifications per MIL-DTL-53072 and meet ISO 9001:2015 quality standards. First article testing requires two units to be produced and tested per contract requirements, with the test report accepted at the destination. Packaging and marking must follow MIL-STD-2073-1 and MIL-STD-129, with special attention to the SPI 12933517 Revision C, and all wood packaging must comply with ISPM 15 and bear an ALSC-approved mark. Delivery of production units is scheduled within 225 calendar days after written FAT approval, with the first article test units due within 90 calendar days of order placement, and shipment is FOB destination to DLA Distribution Red River in Texarkana, TX. The contractor must also comply with NIST SP 800-171 cybersecurity requirements, complete Counterintelligence Awareness and Anti-Terrorism Level I training, and ensure all data is destroyed upon contract completion. All submitted offers must cover the full quantity, and late or incomplete proposals will be rejected.

POSTED

about 23 hours ago

DEADLINE

Shock Absorber Supply and DeliveryThe contract outlines the procurement and delivery of 30 military-specification shock absorbers identified by NSN 2510017136612, requiring full compliance with MIL-STD packaging and labeling standards to ensure military operational readiness and logistical compatibility. The items must be supplied under a subcontract arrangement, with the Department of Defense through its LAND SUPPLY CHAIN organization overseeing the requirement. All deliveries must meet stringent military specifications without exception, and the packaging must adhere to standardized protocols for handling, storage, and distribution within defense supply chains. The solicitation was posted on August 3, 2026, with a firm response deadline of August 14, 2026, leaving a narrow window for potential vendors to submit offers. The NAICS code 336360 indicates the category covers automotive parts manufacturing specifically tailored for defense use. Although no specific place of performance or point of contact is listed, the contract is accessible via the DIBBS platform, suggesting all communication and submissions must occur through the designated federal procurement portal. The absence of set-aside details implies the opportunity is open to all qualified contractors, with emphasis placed on technical compliance, timely delivery, and adherence to military logistical standards.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Rearview Mirror (ARM) Manufacturing and SupplyThe contract seeks the manufacture and supply of a military-spec rearview mirror (ARM) identified by NSN 2540-01-712-3280 and part number 402/H1551, requiring strict compliance with designated technical specifications, quality control standards, and packaging requirements to meet military operational needs. The item must be produced to ensure durability, performance, and reliability under harsh conditions typical of combat vehicle environments. Responsibility for adherence to all referenced standards falls entirely on the contractor, who must deliver fully compliant units in accordance with defined delivery schedules and inspection protocols. This is a subcontract opportunity issued by the Department of Defense through LSO COMBAT VEHICLES AND ARMAMENT, with performance expected to be conducted in Huntsville, Alabama, at the ZIP code 35805-6715. The solicitation was posted on August 3, 2026, and responses are due by August 14, 2026. The North American Industry Classification System code 336360 categorizes this under Automotive Body, Trailer, and Other Motor Vehicle Manufacturing. No set-aside designation has been assigned, and the procurement is open to qualified subcontractors capable of fulfilling all technical, logistical, and compliance obligations without deviation.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Manufacturing of Control Pedal (NSN 2540-01-690-0838)The contract requires the precision manufacturing of a single military control pedal identified by NSN 2540-01-690-0838, fully compliant with DLA technical specifications and MIL-STD-2073-1E packaging standards to ensure operational readiness and logistical compatibility. The product must be produced to exacting military tolerances and delivered in accordance with stringent defense procurement protocols, with the place of performance designated as Fort Carson, Colorado, 80913-4093. This is a subcontract opportunity under the NAICS code 336360, which classifies it within the Other Transportation Equipment Manufacturing sector, and it was posted on August 3, 2026, with a response deadline of August 14, 2026. The contracting entity is the Department of Defense through the Land Supply Chain organization, and the solicitation is accessible via the DIBBS platform under reference number SPE7L126Q1430. No set-aside designation or specific point of contact is provided, indicating the opportunity is open to qualified subcontractors without demographic or size restrictions.

LAND SUPPLY CHAIN

POSTED

DEADLINE

CYLINDER ASSEMBLY, R

Solicitation # SPE7LX-26-U-9184

This contract, identified as SPE7LX-26-U-9184, is an indefinite-delivery, indefinite-quantity (IDIQ) solicitation issued by the Department of Defense’s Strategic Acquisition Program Directorate under DLA Land and Maritime, with a total maximum value of $350,000. It is structured as a total small business set-aside under FAR 19.5, targeting qualified small businesses for the supply of cylinder assemblies identified by NSN 2540016592019. The estimated quantity listed is three units with a FOB Origin delivery term, requiring delivery within 76 days after issuance of an individual order, though this quantity is provisional and may not be purchased. The contract incorporates all applicable DLA Master List of Technical and Quality Requirements, including specifications for hazardous and non-hazardous packaging under FED-STD-313 and ASTM D3951, with mandatory compliance to MIL-STD-129 for all marking, labeling, and barcoding, and RP001 for palletization procedures. Physical identification of bare items must follow RQ017, while government identification must be removed from non-accepted supplies per RQ011. Inspection and acceptance occur at the destination, with the government responsible for verification, and invoicing must be submitted exclusively through WAWF. The solicitation includes numerous FAR and DFARS clauses covering payment terms, subcontractor management, employment verification, cybersecurity protections, hazardous material handling, and prohibitions on certain chemicals, all requiring full contractor compliance. Contractors must maintain active SAM.gov registration and disclose entity identifiers, while also adhering to cybersecurity requirements tied to NIST SP 800-171 and DFARS 252.204-7012 for safeguarding controlled unclassified information. No specific unit pricing is provided, and no individual delivery order is guaranteed, making this a framework for future orders to be issued during an effective period, with proposals due by August 18, 2026, through the DIBBS portal.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

PRODUCTION CONTROL TES

Solicitation # SPE7L3-26-Q-1164

The contract involves the procurement of five units of automotive transparent armor window with NSN 0001S00000114 under solicitation SPE7L3-26-Q-1164, with a delivery requirement within 147 days after order. The contract mandates compliance with DLA’s technical and quality requirements as listed in the Master List, and packaging must adhere to DLA specifications. The use of Class I ozone-depleting chemicals is strictly prohibited, and any alternative substances must be submitted for approval unless explicitly authorized by the technical specs. Technical data associated with this item is subject to export controls under ITAR or EAR, requiring prior government authorization for any disclosure to foreign persons, including those on U.S. soil, and restricts access to contractors with approved JCP certification, completed DOD export control training, and DLA authorization. The contractor must be a CMMC Level 2 certified third-party assessment organization, ensuring cybersecurity practices meet federal standards. All activities are governed under the Department of Defense, with performance directed to New Cumberland, PA, and primary point of contact Eric Deck at DLA.

Metal Window and Door Manufacturing

POSTED

about 18 hours ago

DEADLINE

GOVERNMENT FIRST ARTIC

Solicitation # SPE7L3-26-T-147W

The contract pertains to the procurement of five units of a housing, mechanical drive component with NSN/Part Number 0001S00000052 under solicitation SPE7L3-26-T-147W, issued by the Department of Defense through the Defense LogisticsAgency. Delivery is required within 359 days after award, with inspection and acceptance taking place at the supplier’s origin. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and the applicable revision is determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The contract includes stringent export control provisions under ITAR or EAR, restricting all handling, disclosure, and transfer of technical data to foreign persons regardless of location, and mandates compliance with DFARS 252.225-7048. Only contractors with approved U.S./Canada Joint Certification Program status, completed DLA export control training, and authorized access may handle the controlled data. Cybersecurity requirements include CMMC Level 2 certification by a third-party assessment organization, and the solicitation is open to full and open competition. The designated place of performance is in Tracy, California, 95304-5000, with Karen McCarley as the primary point of contact.

Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 18 hours ago

DEADLINE

Solicitation # SPE7L3-26-T-147M

The contract pertains to the procurement of 220 gaskets identified by NSN 5330-21-912-1607 under solicitation SPE7L3-26-T-147M, with a response deadline of August 17, 2026, and a required delivery within 21 days of award. All items must be packaged and sealed in a medium duty, waterproof, greaseproof, opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, to protect against ultraviolet degradation, and this packaging requirement applies to direct vendor delivery, foreign military sales, and stock shipments. The use of asbestos as defined in FED-STD-313 is strictly prohibited. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless an amendment changes the controlling revision. The contract is issued by the Department of Defense under the Land Supplier Operations Vehicle Support office, with performance required at New Cumberland, Pennsylvania, 17070-5002. The primary point of contact is Amber Rohly, reachable via email and phone provided, and the NAICS code 339991 indicates the industry classification for other manufacturing.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

DECAL CUT SHEET, AIR

Solicitation # SPE7L3-26-T-147F

The contract pertains to the procurement of two DECAL CUT SHEET, AIR items under solicitation SPE7L3-26-T-147F, with a delivery requirement of five days after award. The item is designated as a commercial item and is identified by the national stock number 5330-01-584-2931. All technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item must comply with stringent packaging standards requiring medium-duty, waterproof, greaseproof, and opaque packaging per MIL-DTL-117, Type II, Class C, Style 1, applicable to direct vendor delivery, foreign military sales, and stock shipments, to protect against UV degradation. The use of asbestos, as defined in FED-STD-313, is strictly prohibited. Proprietary or insufficient data precludes competitive bidding, and the item is not subject to set-aside classifications. The contracting office is under the Department of Defense, specifically the Land Supplier Operations Vehicle Support, with the point of contact being Lee Miller at the provided email and phone number. Performance is directed to FPO with ZIP 96306-0001, and the solicitation closes on August 17, 2026.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

FILTER ELEMENT, INTA

Solicitation # SPE7L3-26-T-147J

This contract is for the procurement of a filter element for an intake air cleaner under solicitation SPE7L3-26-T-147J, issued by the Department of Defense through the Defense Logistics Agency. The item is source-controlled with specific drawing and technical revisions referenced, and only approved sources listed on the drawing are recognized at this time, though additional qualified suppliers may exist without being reflected on the document. The item must comply with stringent technical and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with special requirements labeled ZZ indicating directional markings and handling instructions. The contract prohibits the use of Class I ozone-depleting chemicals and requires any substitute materials to be pre-approved, overriding any conflicting specification provisions. The contract calls for 97 units to be delivered FOB origin within 84 days, with strict zero variance tolerance and inspection and acceptance occurring at the destination. Each unit must be individually packaged with die-cut or pre-formed cushioning to ensure even weight distribution, impact protection, and prevention of container puncture, in accordance with ASTM D4169 Distribution Cycle 18, Assurance Level II. Packaging validation documentation as specified in MIL-STD-2073-1D, Paragraph 5.6 and 5.2.3 must be provided. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and the solicitation is a total small business set-aside under NAICS code 333618, with responses due by August 17, 2026 and an original required delivery date of September 21, 2026. Primary point of contact is Karen McCarley at DLA.

Other Engine Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

PACKING, PREFORMED

Solicitation # SPE7L3-26-T-125V

The contract solicitation SPE7L3-26-T-125V seeks 82 units of packing, preformed with NSN 5330-00-057-0674 for delivery to New Cumberland, PA, with a 168-day delivery window beginning from the order date. All packaging and preservation must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, including the use of medium-duty, waterproof, greaseproof, opaque bags per MIL-DTL-117, Type II, Class C, Style 1, and compliance with DLA Packaging Requirements RP001 for palletization. Prohibited materials include asbestos as defined by FED-STD-313 and any intentional addition of mercury or mercury-containing compounds except for functional uses in batteries, fluorescent lights, required instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents; portable fluorescent lamps and instruments containing mercury must include a second containment boundary and be shockproof per NAVSEA 5100-003D. Radioactive materials exceeding specified activity levels must be packaged and labeled according to MIL-STD-129. Marking requirements include government consignee addresses, 2D and linear barcodes, and removal of government identification from non-accepted supplies. Preservation method PRES MTHD:33 (clng/dry: 1) is mandatory, with no preservation material specified. The contract mandates electronic invoicing via WAWF and compliance with hazardous material labeling under 29 CFR 1910.1200. All subcontractors must flow down safety, packaging, and transportation requirements. The solicitation requires submission via DIBBS by August 7, 2026, and includes clauses on small business representation, equal opportunity, combating trafficking, employment eligibility verification, cybersecurity for controlled unclassified information, and unenforceability of unauthorized obligations. While the contract does not specify pricing, contract type, or evaluation factors, it requires offerors to provide their UEI and CAGE codes and confirm size status and socioeconomic certifications. Performance is FOB origin, with government inspection and acceptance occurring at the destination.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

Solicitation # SPE7L3-26-T-147L

The contract pertains to the procurement of 54 gaskets with NSN 5330-01-302-9947 and part number 12358949, sourced exclusively from approved suppliers, currently limited to Donaldson Company Inc. All suppliers must comply with the latest revision of the original equipment manufacturer’s drawing and meet MIL-STD-130N identification marking standards for U.S. military property. The item must be free of asbestos as defined by FED-STD-313. Unapproved suppliers are required to secure formal source approval from the OEM and submit supporting documentation including a source approval request, technical data package, or proof of prior approval alongside their offer. The solicitation, identified as SPE7L3-26-T-147L, was posted on August 4, 2026, with responses due by August 17, 2026, and requires delivery within 21 days of award to Texarkana, Texas, 75507-5000. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the revision effective on the solicitation issue date controlling for this simplified acquisition. The contracting activity falls under the Department of Defense, Land Supplier Operations Vehicle Support, with primary point of contact Amber Rohly reachable via email and phone provided.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

SOLENOID, ELECTRICAL

Solicitation # SPE7L3-26-T-125H

The contract solicitation SPE7L3-26-T-125H seeks five electrical solenoids identified by NSN 5945-01-527-2487 for delivery to the DLA Land and Maritime facility in Tracy, California, with a required delivery timeline of 12 days ADO. The procurement is governed by a suite of Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses addressing cybersecurity, hazardous material handling, labor compliance, subcontractor management, and payment processes. Key requirements include strict prohibition against intentional introduction of mercury or mercury-containing compounds into the supplied hardware, with exceptions narrowly defined for functional applications such as batteries, sensors, and weapon systems under NAVSEA specifications, requiring shockproof containment and a secondary boundary for portable mercury-bearing devices. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, packaging codes, and labeling per IPC/JEDEC J-STD-609 for lead finish identification. Transportation is FOB destination, with government inspection and acceptance occurring at the delivery site. The contractor must comply with all DLA technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, and all hazardous materials must be labeled in accordance with OSHA’s Hazard Communication Standard and DFARS clause 252.223-7001. Offerors must certify their small business status, provide UEI and CAGE codes if supplying covered defense telecommunications equipment, and fully disclose joint venture participants if claiming socioeconomic set-aside status. All proposals must be submitted electronically through the DIBBS portal by the deadline of August 3, 2026, and upon award, payment will be processed exclusively via WAWF using the DoDAAC specified in the resulting contract. Pricing data is not provided, and no evaluation factors, weights, or basis of award are specified in the solicitation.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

Solicitation # SPE7L3-26-T-146V

The contract requires the delivery of two spacer plates, identified by NSN 2590-01-659-7891, under solicitation SPE7L3-26-T-146V, with a total quantity of two units priced at $2.00 per unit, totaling $4.00. Delivery must be completed within 20 days from the date of award, with FOB destination terms applying, and no variance is permitted in quantity. Inspection and acceptance both occur at the origin point, and packaging must conform to MIL-STD-2073-1E with specific preservation methods including dry preservation, no protective coating or cushioning materials, and unit packaging in accordance with OPI O and intermediate container E5. Marking must comply with MIL-STD-129 without any special markings, and palletization must follow DLA’s RP001 packaging requirements. The shipment is directed to FPO AP 96660, addressed to USS ASHLAND LSD 48, and parcel post is explicitly prohibited—shipment must be sent by the fastest traceable means. The required delivery date is December 18, 2025, and the contract is managed by the Department of Defense under the Land Supplier Operations Vehicle Support agency, with Lee Miller as the point of contact. The NAICS code is 333310, and the solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 18 hours ago

DEADLINE

Solicitation # SPE7L3-26-T-147C

The contract pertains to the procurement of three units of a GATE, GUIDE component identified by NSN 1005-01-324-3094 under solicitation SPE7L3-26-T-147C, with a delivery deadline of 318 days from award. The requirement is governed by the DLA Master List of Technical and Quality Requirements, with applicable specifications referenced by R or I numbers, and compliance with tailored higher-level quality standards for both manufacturers and non-manufacturers. Demilitarization protocols for Category I munitions items apply, and cybersecurity requirements mandate CMMC Level 2 self-assessment or certification by an accredited third-party organization. Export control restrictions are in effect due to the presence of technical data subject to ITAR or EAR, prohibiting any disclosure or transfer to foreign persons without prior authorization from the Department of State or Commerce, and restricting access to contractors with approved US/Canada Joint Certification Program status, completed DLA export training, and official approval. Packaging must adhere to DLA standards, and inspection and acceptance occur at origin. Item Unique Identification is waived per customer request, but physical marking and removal of government identification from non-accepted supplies are required. Configuration changes require formal engineering change proposals or variance requests. The place of performance is New Cumberland, PA, with Katelyn Young of the Department of Defense serving as the primary point of contact.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 18 hours ago

DEADLINE

PANEL, HOUSING, SECTI

Solicitation # SPE7L3-26-T-147D

The contract pertains to a PANEL, HOUSING, SECTI with NSN 2590-01-687-7510, requiring one unit for delivery within 20 days of award under Purchase Request 7017730998. The solicitation number is SPE7L3-26-T-147D, posted on August 4, 2026, with a response deadline of August 17, 2026. The item falls under NAICS code 333310 and is managed by the Department of Defense through the Land Supplier Ops Vehicle Support agency, with performance occurring at Fort Stewart, Georgia. The contractor must be a Cybersecurity Maturity Model Certification (CMMC) Level 2 certified Third-Party Assessment Organization to qualify. Technical data associated with this item is subject to strict export controls under ITAR or EAR, prohibiting any disclosure to foreign persons, whether inside or outside the U.S., without prior authorization from the Department of State or Commerce. Access to this data is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have been formally approved by DLA. These requirements are enforced under DFARS 252.225-7048. The point of contact for inquiries is Lee Miller, reachable via email and phone provided in the contract details.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 18 hours ago

DEADLINE

Solicitation # SPE7L3-26-T-146R

The contract pertains to the procurement of 36 units of a SEAL ASSEMBLY, identified by NSN 5330-01-170-8632, under solicitation SPE7L3-26-T-146R, with a response deadline of August 17, 2026, and a scheduled delivery 323 days after award. The item must be free of asbestos, and any alternative materials must comply with Clause L30 and Provision 4 conditions. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with applicable revisions determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger procurements, unless an amendment supersedes it. The acquisition falls under NAICS code 339991 and is managed by the Department of Defense’s Land Supplier Operations Vehicle Support organization, with performance occurring in New Cumberland, Pennsylvania, 17070-5002. The primary point of contact is Susan Diamond, reachable via email and phone provided, and all submissions must be made through the DIBBS platform.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 18 hours ago

DEADLINE