This Government Contract opportunity from Government of Canada was posted on June 16, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Bridge Structural Steel Fabrication and Erection

Closed

International

Submission Closed07/07/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332312

New

DIBBS

MOUNT, RESILIENT, WEAPON

Solicitation # SPE4A7-26-T-580B

The contract specifies the procurement of 82 units of a resilient weapon system mount identified by NSN 5342011596456 under solicitation SPE4A7-26-T-580B, with delivery required FOB origin within 169 days after order placement and an original delivery deadline of April 9, 2027. The item is classified as a critical application item with a Type I shelf life of 60 months that is non-extendable, requiring at least 85% of its shelf life to remain upon receipt by the first government activity per DoD 4140.27 Manual. Packaging must conform to MIL-STD-2073-1E with a unit container coded as BS, intermediate containers in ED format holding 100 units each, cushioning material GH, and preservation method 41 using dry heat without humidity or preservation material. Marking is required per MIL-STD-129 including the special code 32 for shelf-life labeling, physical bare item marking per RQ017, and removal of contractor identification from non-accepted items per RQ011. Inspection and acceptance occur at origin under FAR 52.246-2 using MIL-STD-1916 or a comparable zero-based sampling plan with zero non-conformances required unless otherwise specified, assigning verification levels VII, IV, and II to critical, major, and minor attributes respectively. The contract incorporates a suite of defense acquisition regulations including DFARS clauses on cybersecurity, safeguarding covered defense information, prohibition of hexavalent chromium, restrictions on procurement from communist Chinese military companies, and mandatory use of Wide Area WorkFlow for invoicing and receiving reports. The contractor must comply with DLA’s Master List of Technical and Quality Requirements referenced via R and I numbers, and adhere to supply chain and transportation protocols outlined in DLAD proc notes C19 and C20. Contract type is fixed-price with alternate I applied to the type of contract clause, and the award mechanism is likely lowest price technically acceptable based on automated award procedures. Delivery must be made to the DLA New Cumberland Facility in Pennsylvania with all items labeled with the NSN and barcoded as required. The contract includes clauses mandating whistleblower protections, prohibition of mandatory arbitration, safeguarding of contractor information systems, accelerated payments to small business subcontractors, compliance with NIST SP 800-171,

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Prefabricated Metal Fencing Supply and ManufacturingThe contract pertains to the manufacture and supply of prefabricated, corrosion-resistant metal fencing components designed to meet stringent military standards for deployment along the flightline at RAF Akrotiri. The fencing must be engineered for durability in harsh environmental conditions, ensuring long-term structural integrity and security compliance in a high-risk operational zone. Materials and fabrication processes are required to withstand salt spray, extreme temperatures, and constant exposure to aviation fuels and exhaust without degradation. Submission of proposals is due by August 14, 2026, under a subcontract arrangement with the Department of Defense, specifically managed by FA5570 501 Csw Rco. The North American Industry Classification System code 332312 indicates the work falls under metal fence and guardrail manufacturing. All components must be ready for immediate installation at the designated location, RAF Akrotiri with postal code BF1 2AT, and must adhere to all applicable defense specifications without deviation. The procurement is focused on quality, consistency, and timely delivery to support critical airfield security operations.

POSTED

DEADLINE

Reinforcing Steel SupplyThe contract entails the supply of reinforcing steel, commonly known as rebar, to be provided on a per-kilogram basis as outlined in CLIN 3, with all materials required to strictly comply with the project’s technical specifications. The rebar must be delivered in its original, undamaged packaging to ensure quality and integrity upon arrival. The solicitation is classified as a subcontract under NAICS code 332312, which corresponds to prefabricated metal building and component manufacturing, indicating the specialized nature of the procurement. The contract is issued by the Department of State through the American Embassy Bogota - Nas, with a response deadline of September 2, 2026, at 9:00 PM. The posting date is July 31, 2026, and the place of performance is not specified, suggesting delivery may occur at an unspecified location tied to the embassy’s project needs. No set-aside designation or organizational type information is provided, and there is no designated point of contact listed publicly. The opportunity is accessible via the SAM.gov platform for interested suppliers.

American Embassy Bogota - Nas

POSTED

DEADLINE

Solicitation # SPE4A726R0736

This contract is an indefinite quantity contract with a five-year base period for the procurement of resilient mounts, designated as MOUNT RESILIENT,WEA, under NSN 5342-000648292. It is a small business set-aside, exclusively available to certified small businesses, and requires suppliers to be actively registered in the System for Award Management with annual updates. The estimated annual demand is 162 units, with delivery orders ranging from a minimum of 57 to a maximum of 162 units per order. FOB terms are destination, and inspection and acceptance occur at origin. The delivery schedule follows the 164 DARO criteria, and the contract is subject to export controls and higher-level restrictions. Material is classified as critical application, and the Qualified Products List applies. Cost and pricing data may be required, and progress payments are not authorized. Supplier performance risk will be monitored under the Supplier Performance Risk System. Evaluation for award will be based on equal weighting of price, past performance, and delivery, with final selections determined by the combination of these and other factors outlined in the solicitation. Offers must be submitted in writing by the closing date of September 18, 2026, following the issue date of August 17, 2026. The solicitation is accessible exclusively through the DLA Internet Bid Board Systems, and no paper copies will be provided; Adobe Acrobat Reader is required to access documents. The contracting office is the Department of Defense, DLA Aviation, based in Richmond, Virginia, with Montana Kipp as the primary point of contact. All responsible sources may submit offers, and the NAICS code is 332312. EEO clearance is not required, and there is no surge requirement.

POSTED

DEADLINE

Miter Gate Strut Arm Assembly Fabrication

Solicitation # W912ES26BA020

The U.S. Army Corps of Engineers - St. Paul District is seeking a qualified small business contractor to fabricate Strut Arm Assemblies for Miter Gates used on Locks along the Upper Mississippi River. Each assembly is 18 feet 4 inches in length and must be constructed from specific grades of steel castings and machined components, adhering to stringent quality standards. The contractor must hold one of three AISC certifications: Intermediate or Advanced Bridge Fabricator with fracture critical endorsement, or Certified Hydraulic Steel Structures Fabricator with fracture critical endorsement, and must also be certified under the AISC Quality Certification Program for applying sophisticated paint systems in Category P1, P2, or P3. Comprehensive quality control and quality assurance procedures are required for casting, machining, and painting operations. All finished assemblies must be delivered to the USACE Service Base in Fountain City, Wisconsin no later than March 30, 2028. This procurement is a total small business set-aside under NAICS code 332312, with a size standard of 500 employees, and bids must be submitted exclusively through the PIEE module. No bid bonds are required, but all offerors must be fully registered in SAM with current FAR and DFARS representations and certifications. Questions must be submitted via the PIEE Q&A tab, and the solicitation number is W912ES26BA020 with a response deadline of September 2, 2026.

POSTED

DEADLINE

Gap Fencing - RAF Akrotiri

Solicitation # FA557026Q0022

The contract seeks a solution to close a gap in the fence along the flightline at RAF Akrotiri in Cyprus, with the aim of enhancing security and operational integrity at the site. The contractor has the flexibility to either ship the required materials directly to the provided U.S. military address in APO AE or transport the supplies independently into Cyprus and deliver them to RAF Akrotiri by their own means. The solicitation is identified by number FA557026Q0022, released on July 31, 2026, with proposals due by August 14, 2026. It falls under NAICS code 332312, which pertains to architectural and structural metal manufacturing, indicating the nature of the fencing components expected. There is no set-aside classification, meaning the opportunity is open to all qualified vendors. The requesting agency is the Department of Defense, specifically the FA5570 501 Csw Rco office, and the point of contact for inquiries is David T. Bartilson, reachable via email. The place of performance is clearly defined as RAF Akrotiri with its local postal code, ensuring clarity on where the work must be executed.

POSTED

DEADLINE

Replace Corroded Cleat on Base Alameda Pier

Solicitation # 31090PR260000347

This solicitation, numbered 31090PR260000347, is a small business set-aside under FAR 19.5 for the replacement of Cleat #16:J at Coast Guard Base Alameda in California, with a estimated contract value between $25,000 and $100,000. The work involves full removal of the existing cleat and installation of a new 24-inch, 15-ton capacity cleat with a powder-coated finish matching the existing infrastructure, all to be completed within 60 calendar days after the Notice to Proceed. Performance must occur on Coast Guard Island, Alameda, with strict coordination required around active cutter operations, adherence to OSHA regulations, the U.S. Coast Guard Safety and Environmental Health Manual COMDTINST M5100.47, and all applicable federal, state, and local codes. The procurement follows a Lowest Price Technically Acceptable (LPTA) strategy, where offers are first evaluated for technical acceptability—requiring complete and reasonable addressing of the Statement of Work—and only technically acceptable offers are considered for award based on the lowest price. Offers must be submitted via email to the contracting officer and contract specialist by 19:00 Eastern Time on July 31, 2026, with submissions limited to 9MB per email and required to be on company letterhead, including SAM representation, technical approach, and detailed pricing. A single site visit is permitted, requiring prior coordination with the primary and secondary points of contact. Contract administration is governed by a Firm Fixed Price structure with invoicing exclusively through the Invoice Processing Platform, and payment is processed via the USCG Finance Center in Chesapeake, Virginia. Contractors must comply with stringent access and security requirements, including mandatory U.S. citizenship or lawful permanent residency for all personnel, completion of background investigations for facility access, CUI handling training, and flow-down of security clauses to subcontractors. Clause 52.204-9 mandates personal identity verification, and all contractors must maintain current SAM registration, including UEI and CAGE codes, with additional disclosures required if using covered telecommunications equipment. The contract includes no specified packaging, marking, or bar-coding requirements, and all deliverables must be fully cleaned up and restored upon completion.

POSTED

DEADLINE

CSO: LUH-72A Aircraft Maintenance Platform for Delaware National Guard Army Aviation Support Facility

Solicitation # W912L5-26-S-C030

The contract seeks a mobile, modular, multi-person, height-adjustable maintenance platform designed specifically for daily maintenance operations on the LUH-72A Lakota rotorcraft within the Army Aviation Support Facility operated by the Delaware Army National Guard. The platform must support safe and efficient access to all critical areas of the aircraft during routine servicing and inspection, ensuring optimal operational readiness while meeting stringent military standards for utility, durability, and safety. It must be fully compatible with the physical layout and operational protocols of the AASF hangar in New Castle, Delaware, and accommodate multiple technicians working simultaneously at varying heights. This solicitation, numbered W912L5-26-S-C030, is a Small Business Set Aside under NAICS code 332312, reserved exclusively for small businesses to compete. Responses are due by August 25, 2026, and the opportunity was posted on July 31, 2026. The Department of Defense, through the U.S. Army Program Executive Office for Aviation, is the contracting authority, with Joseph Scarpa as the primary point of contact and Amy Kline as secondary. All work must be performed at the Delaware location, and proposals must demonstrate technical feasibility, compliance with military specifications, and the capability to deliver and install the platform without disruption to daily hangar operations.

W7M0 Uspfo Activity De Arng

POSTED

DEADLINE

Structural Steel SupplyThe contract pertains to the supply of prefabricated structural steel components required for the framing of multi-story academic and student housing buildings, with the NAICS code 332312 indicating classification under structural steel fabrication. The solicitation is issued as a subcontract under the agency name MPTAP, associated with Mississippi, and is open for response until August 18, 2026, with the posting date set for July 30, 2026. The place of performance and specific location details are not provided, and no set-aside designation or organizational type is specified. Interested parties must respond through the official bid search portal prior to the deadline, and all components must meet the technical and quality standards necessary for use in high-rise educational and residential construction projects.

POSTED

DEADLINE

Precision Machining and Metal Fabrication of Retaining StrapsThe contract entails the precision machining and metal fabrication of retaining straps in strict compliance with military drawings and specifications, requiring full manufacturing processes including cutting, forming, heat treatment, and surface finishing. All work must adhere to DLA and MIL-STD standards to ensure dimensional accuracy, material integrity, and operational reliability for defense applications. The NAICS code 332312 indicates this is a specialized metal fabrication effort under the broader category of forge and stamping operations, aligning with DoD supply chain priorities. This is a subcontract opportunity issued by the Land Supply Chain under the Department of Defense, with a posted date of July 30, 2026, and a firm response deadline of August 10, 2026. The place of performance and specific office details are not provided, but the requirement is actively solicited through the DIBBS platform, indicating a formal procurement process open to qualified subcontractors capable of meeting rigorous military-grade manufacturing standards. Bidders must demonstrate capability to execute all specified production steps and certification requirements without reliance on external support for critical processes.

POSTED

DEADLINE

Manufacture and Supply of Weapon Access Door (NSN 5342-01-728-9422)The contract requires the full manufacturing, testing, and delivery of one weapon access door identified by NSN 5342-01-728-9422, with strict adherence to military specifications governing materials, durability, and security features to ensure operational reliability in demanding environments. The work must be completed in full compliance with all technical and quality control standards applicable to defense-grade components, and the final product is to be delivered to the specified performance location in Mechanicsburg, Pennsylvania, with zip code 17050-2411. Issued as a subcontract under NAICS code 332312, the opportunity was posted on July 30, 2026, with a response deadline of August 7, 2026, indicating an expedited procurement timeline. The contracting activity falls under the Department of Defense, specifically managed by the ASC SUPPLIER OPER AE AND AF DIV, and the solicitation is accessible via the DIBBS system. All submissions must meet the rigorous requirements defined by the military specification, and only qualified suppliers capable of end-to-end production and certification are eligible to respond.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Manufacture of Structural Aircraft PanelThe contract requires the fabrication, machining, assembly, and delivery of a structural aircraft panel in full compliance with military specifications. Production is contingent upon successful completion of First Article Testing, ensuring that the initial unit meets all required design, performance, and quality standards before full-scale manufacturing begins. Origin inspection and formal acceptance are mandatory, verifying that materials, processes, and final assembly conform to federal military standards from source through final delivery. The work falls under NAICS code 332312, indicating precision manufacturing of aircraft parts, and is classified as a subcontract under the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on July 30, 2026, with responses due by August 10, 2026, and performance is expected to occur at an unspecified location under the oversight of the U.S. military supply chain.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

2 days ago

DEADLINE

in 9 days

AI Contract Overview

The contract involves the fabrication and installation of structural steel components, including beams, girders, trusses, and connection elements, specifically for a bridge replacement or repair project. This subcontract is issued by the Parks Canada Agency under the Government of Canada, targeting work to be carried out in Ontario, excluding the National Capital Region. The solicitation was posted on June 16, 2026, with a response deadline set for July 7, 2026. The project falls under the NAICS code 332312, which pertains to fabricated structural metal manufacturing. While no specific subcontract type or set-aside requirements are indicated, the focus is on delivering high-quality structural steel elements and ensuring their proper erection on site. The contract is essential for maintaining and upgrading bridge infrastructure, reflecting a critical investment in public safety and transportation reliability in the designated region.

General Info

Fabrication and installation of structural steel for Ontario bridge replacement, Parks Canada project.

Agency

Government of Canada → Parks Canada AgencyView Agency

NAICS

332312 - Fabricated Structural Metal ManufacturingView NAICS

Place of Performance

Ontario (except NCR), CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJun 16

subcontract

Response DeadlineJul 7

Deadline has passed

Submission Closed

07/07/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Parks Canada Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → Parks Canada Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Fabrication and installation of structural steel components such as beams, girders, trusses, and connections for a bridge replacement or repair project.