Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Calibration and Certification of Differential Gage

Active

Response Deadline10/07/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the calibration and certification of differential gages to support prime contractors delivering DLA supply contracts. The selected provider will perform final inspections and dimensional verification using master gages and Coordinate Measuring Machines within a controlled laboratory environment to ensure accuracy against design reference 19NCXXX0X15E18BAXX04. The final deliverables for this effort are the official Calibration Certificate and Inspection Report. The project is managed by the Department of the Navy under the SPRMM1 DLA Mechanicsburg agency and is categorized under NAICS code 541380. Performance of these services will take place in Mechanicsburg, Pennsylvania. While not mandatory, ISO/IEC 17025 accreditation is preferred for the performing entity. The response deadline for this opportunity is October 7, 2026.

General Info

Calibration and certification of differential gages for DLA in Mechanicsburg, PA by October 2026.

Agency

Department Of The Navy → SPRMM1 DLA MechanicsburgView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

MECHANICSBURG, PA, 17055-0788, USA

Set-Aside

NONE

Documents

This scope was carved out of SPRMM1-26-Q-KJ14.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

GAGE,DIFFERENTIAL,D — 6685016668884 — SPRMM126QKJ14

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 22

subcontract

Response DeadlineOct 7

Submission deadline

Response Deadline

10/07/2026, 08:30:00 PM UTCin 15 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Navy → SPRMM1 DLA Mechanicsburg

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of The Navy → SPRMM1 DLA Mechanicsburg

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs final inspection, calibration, and certification for prime contractors delivering DLA supply contracts. Conducts dimensional inspection using Coordinate Measuring Machines (CMM) and master gages in a controlled environment laboratory to verify accuracy against design reference 19NCXXX0X15E18BAXX04. ISO/IEC 17025 accreditation preferred. Delivers the Calibration Certificate and Inspection Report.

Similar Contracts

Same NAICS industry code

Geotechnical and Materials Testing Services for Waterline Replacement Project in Hemet, CA

Solicitation # CIP 5661

Albert A. Webb Associates is seeking a qualified small and disadvantaged business firm to serve as a subconsultant for the City of Hemet's Oakland and Santa Fe Waterline Replacement project, identified as CIP 5661. The project is funded through a U.S. Environmental Protection Agency Community Grant and is estimated to span approximately 210 construction working days. The selected subconsultant will be responsible for geotechnical and materials inspection and testing services, including initial sampling and acceptance testing of proposed materials, as well as ongoing material and compaction testing for roadway subgrade, aggregate base, trench backfill, pipe bedding, and trench bottom. A key deliverable is a certification memorandum signed by a professional engineer identifying any non-complying materials. The contract requires strict adherence to federal and state regulations, including EPA Disadvantaged Business Enterprise requirements under 40 CFR Part 33, the Build America, Buy America Act, and California prevailing wage laws. Subcontractors must be registered with the Department of Industrial Relations and comply with the California Levine Act regarding campaign contribution disclosures. The award is contingent upon the selection of Albert A. Webb Associates by the City of Hemet. Interested firms must provide a technical proposal, a fee proposal based on lump sum, unit price, and hourly rates, and documentation of their small or disadvantaged business certifications.

Albert A. Webb Associates

POSTED

about 3 hours ago

DEADLINE

Production Lot Test (PLT) ServicesThis subcontract for Production Lot Test (PLT) Services, managed by the Department of Defense ASC Commodities Division, involves performing specialized testing and validation on production lots of cable assemblies for prime contractors on DLA Aviation projects. The scope of work requires executing tests to verify electrical continuity, signal integrity, and physical tolerances according to NSN 6150-01-091-6485, utilizing equipment such as multimeters, oscilloscopes, or automated cable testers to deliver certified test reports. The project falls under NAICS code 541380 and is to be performed in New Cumberland, Pennsylvania. Interested parties must respond by September 30, 2026, following the posting date of September 22, 2026.

ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

Quality Assurance and Inspection ServicesThis subcontract for Quality Assurance and Inspection Services involves the attribute and variable inspection of 24 manufactured ground rods for prime contractors under the ASC Supplier Oper AE and AF Div. The scope of work requires the execution of inspection plans based on MIL-STD-1916 to verify that material properties and dimensions align with the Technical Data Package. The contractor will utilize precision metrology tools, including calipers and micrometers, to perform these evaluations. Final deliverables include detailed inspection reports and certifications of compliance. The performance of these services is located in Cherry Point, and the project falls under NAICS code 541380.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

Quality Testing and Certification Services (PLT)This subcontract for Quality Testing and Certification Services focuses on performing Production Lot Testing for prime contractors delivering DLA supply contracts. The selected provider will utilize metrology and testing equipment to measure actual results against the tolerances specified in the technical data package, ensuring all deliverables meet the required standards. The scope of work includes generating formal test reports and process certifications acceptable to the DLA, with a final delivery of certified reports detailing actual results and tolerances. This requirement is managed by the ASC Commodities Division of the Department of Defense, with the place of performance located at Hill AFB, Utah.

ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

First Article Test (FAT) for Conduit AssembliesThis subcontract involves performing First Article Testing for conduit assemblies to support prime contractors delivering DLA Aviation supply contracts. The primary objective is to conduct testing on the first production unit of NSN 5975-01-532-0286 to ensure full compliance with technical specifications, material integrity, and dimensional accuracy. Using precision measurement equipment to validate NSN data, the provider will deliver a formal FAT Report and an approved first article sample. The project is managed by the Department of Defense under the ASC Supplier Oper AE and AF Div, with performance taking place in New Cumberland, Pennsylvania. Classified under NAICS code 541380, the opportunity was posted on September 22, 2026, with a response deadline of September 30, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

First Article Test (FAT) Coordination and ExecutionThis subcontract for the Department of Defense ASC Commodities Division involves the coordination and execution of First Article Testing to support prime contractors delivering DLA supply contracts. The primary objective is to validate manufacturing processes and product specifications by verifying material properties, dimensions, and quality standards. This technical validation is performed using specialized metrology and inspection equipment, including micrometers and Coordinate Measuring Machines. The selected provider is responsible for submitting detailed test results for government approval and delivering the final FAT Report along with approved first-article samples. The work is designated under NAICS code 541380 and will be performed in Texarkana, Texas. The solicitation was posted on September 22, 2026, with a response deadline of September 30, 2026.

ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

First Article Test (FAT) and Quality Validation ServicesThis subcontract for First Article Test and Quality Validation Services supports prime contractors on Defense Logistics Agency projects. The selected provider will perform specialized attribute or variable inspections according to MIL-STD-1916 and validate material properties and dimensions against 98897 series drawings. The primary deliverables include certified test reports and validated First Article units. The contract is managed by the Department of Defense under the ASC Supplier Oper AE and AF Div, with performance taking place at Robins Air Force Base. Due to the handling of export-controlled technical data, the provider must maintain ITAR registration and CMMC Level 2 certification. The opportunity is categorized under NAICS code 541380, with a response deadline of September 30, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

Independent Testing AgencyThe City of Pickering is seeking a subcontracted Independent Testing Agency to perform independent inspection and testing of installed electrical systems for prime contractors on various facility projects. The selected provider will utilize specialized electrical testing and diagnostic equipment to verify installations and must hold independent third-party certification to ensure compliance and quality. The primary responsibility of the contractor is to deliver formal inspection and final test reports to both the City and the prime contractor. This opportunity was posted on September 22, 2026, with a response deadline of October 14, 2026.

City of Pickering

POSTED

about 16 hours ago

DEADLINE

Geotechnical and Construction Material Testing

City of Grande Prairie

POSTED

about 17 hours ago

DEADLINE

NDT Inspection Services (UT/VT)This subcontract for NDT Inspection Services involves performing non-destructive testing for prime contractors on IMF vessel projects at the Puget Sound Naval Shipyard. The scope of work requires conducting ultrasonic thickness measurements at 700 specific sites across the underwater body, hull, and freeboard, as well as visual inspections of the hull, freeboard, and all three decks. All testing must be performed using ultrasonic thickness gauges and visual inspection tools in accordance with ASTM weld inspection standards. The successful contractor is responsible for delivering documented UT/VT inspection reports as specified in CDRL A032. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense.

Puget Sound Naval Shipyard IMF

POSTED

about 19 hours ago

DEADLINE

in about 1 month

LPM Testing and Validation ServicesThe LPM Testing and Validation Services subcontract, issued by Navsea HQ under the Department of Defense, involves the technical testing and evaluation of LPMs for prime contractors on submarine projects. The scope of work includes executing the Type 20 and Type 24 Test Requirements Matrix and validating Classified Annex requirements through the use of environmental and pressure testing chambers. To fulfill these requirements, the contractor must maintain a SECRET Facility Clearance and ensure full compliance with NISPOM standards. The primary deliverables for this engagement are the submission of detailed test reports and official validation certificates. This opportunity falls under NAICS code 541380, with a response deadline of October 20, 2026.

POSTED

about 19 hours ago

DEADLINE

First Article Testing (FAT) and Validation ServicesThis small business set-aside subcontract for DLA Land Warren involves providing First Article Testing and Validation Services for a single unit of manufactured hardware. The contractor is responsible for executing technical tests according to the Technical Data Package and MIL-STD 1916 sampling standards, while coordinating with DCMA for final inspection and acceptance. The primary deliverables include one validated test unit and a completed First Article Test Report. To qualify for this engagement, the provider must maintain US/Canada Joint Certification Program status and ensure full compliance with CMMC and NIST SP 800-171 standards for the secure handling of technical data. The solicitation was posted on September 22, 2026, with a response deadline of October 23, 2026, under NAICS code 541380.

DLA Land Warren

POSTED

about 19 hours ago

DEADLINE

in about 1 month

More opportunities from Department Of The Navy → SPRMM1 DLA Mechanicsburg

Same awarding agency

Precision Machining and Fabrication of Differential GageThis subcontract involves the precision machining and fabrication of the GAGE, DIFFERENTIAL, D (NIIN 016668884) for prime contractors supporting DLA supply contracts. The scope of work includes precision machining of the gage body and components to strict dimensional tolerances, heat treatment, surface finishing, and final assembly. All parts must be marked according to MIL-STD-130, REV N, and the manufacturer must utilize CNC precision milling, turning, and grinding equipment. The contract is issued by the Department of the Navy under the SPRMM1 DLA Mechanicsburg agency, with performance located in Mechanicsburg, Pennsylvania. Due to the handling of Federal Contract Information and Controlled Unclassified Information, a CMMC UID is required. The solicitation was posted on September 22, 2026, with a response deadline of October 7, 2026, falling under NAICS code 332710.

POSTED

DEADLINE

Supply of Actuator Assembly (Cage 35795)This subcontract involves the supply of actuator assemblies for prime contractors under DLA supply contracts, specifically procuring items from design source Cage Code 35795. The contractor must ensure full supply chain traceability and CDAP compliance, with items identified according to MIL-STD-129 R and provided with Unique Item Identifiers. To qualify, the provider must maintain ISO9001 certification and deliver both the physical assemblies and the required Material Inspection and Receiving Reports. Managed by the Department of the Navy through SPRMM1 DLA Mechanicsburg, the contract is categorized under NAICS code 333249. The place of performance is located in Mechanicsburg, Pennsylvania. Interested parties must respond by October 22, 2026, following the posting date of September 22, 2026.

Other Industrial Machinery Manufacturing

POSTED

DEADLINE

Supply of Actuator Sub-components and Raw MaterialsThis subcontract, titled Supply of Actuator Sub-components and Raw Materials, is issued by the Department of the Navy via DLA Mechanicsburg. The contractor is responsible for providing raw materials, castings, or precision-machined sub-components that meet the design reference specifications of Cage 35795 to support prime contractors delivering DLA supply contracts. Key requirements include the delivery of certified materials and comprehensive supply chain traceability documentation, such as batch IDs, lot codes, serial numbers, and manufacturing source CAGE codes. Additionally, the provider must ensure full compliance with the Counterfeit Detection and Avoidance Program. The contract falls under NAICS code 332710 and is centered in Mechanicsburg, Pennsylvania.

POSTED

DEADLINE

Manufacture of Actuator Assembly (NIIN 017158874)This subcontract involves the manufacture of the Actuator Assembly, identified by NIIN 017158874, for prime contractors supporting DLA supply contracts. The production must strictly adhere to Cage Code 35795, reference number Y109101026AK, and TDP Version O01. The project is managed under the Department of the Navy through the SPRMM1 DLA Mechanicsburg agency, with performance located in Mechanicsburg, Pennsylvania. The manufacturer is required to implement ISO9001 quality control standards and follow MIL-STD-129 R for packaging and marking. Key operational requirements include the use of precision machining and UID marking equipment, full supply chain traceability, and CDAP compliance. All finished assemblies must be delivered with complete quality documentation. The response deadline for this opportunity is October 22, 2026.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

MIL-STD-130 and IUID Marking ServicesThis subcontract for MIL-STD-130 and IUID Marking Services supports prime contractors on DLA Mechanicsburg supply contracts. The selected provider will perform specialized physical identification and machine-readable marking using laser marking or etching equipment to ensure permanent industrial labeling. All work must comply with MIL-STD-130, REV N and DFARS 252.211-7003, specifically utilizing ISO/IEC 16022 Data Matrix codes for Item Unique Identification. The contract is managed by the Department of the Navy under agency SPRMM1 DLA Mechanicsburg, with performance taking place in Mechanicsburg, Pennsylvania. The scope of work includes the delivery of permanently marked components along with the necessary verification data. The solicitation was posted on September 22, 2026, with a response deadline of October 22, 2026, falling under NAICS code 339999.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Manufacture of Positive Clutch (NSN 3010-01-266-6858)This subcontract involves the precision machining and manufacture of a Positive Clutch, identified by NSN 3010-01-266-6858, for prime contractors supporting DLA Mechanicsburg supply contracts. The fabrication must adhere to Cage Code 55759 and reference number SL14726, with the final delivery including the completed clutch assembly along with all necessary material certifications and test reports. The provider is responsible for rigorous quality control inspections and maintaining full supply chain traceability. Compliance with MIL-STD-130, REV N and DFARS 252.211-7003 IUID requirements is mandatory. The project falls under NAICS code 333515 and is managed by the Department of the Navy via the SPRMM1 DLA Mechanicsburg agency, with performance taking place in Mechanicsburg, Pennsylvania.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

DEADLINE

Preservation, Packaging, and Marking ServicesThis subcontract for Preservation, Packaging, and Marking Services supports prime contractors delivering DLA supply contracts through the Department of the Navy. The scope of work involves the secure packaging and labeling of modules, specifically requiring the application of Depot Level Repairable labels and Special Material Identification Code markings. This includes the mandatory application of red Level 1 markings on two sides and two ends to meet SMIC L1 requirements. The contractor must ensure full compliance with WSSTERMDZ03 and NAVSUP WSS Maritime standards. The services will be performed in Mechanicsburg, Pennsylvania, under NAICS code 561910. The opportunity was posted on September 22, 2026, with a response deadline of October 22, 2026, and is managed by the SPRMM1 DLA Mechanicsburg office.

Packaging and Labeling Services

POSTED

DEADLINE

Power Module 90 KVA Manufacturing and SupplyThis subcontract involves the manufacture and supply of Power Module 90 KVA hardware for prime contractors supporting DLA supply contracts. The units must be produced according to NSN 6120-01-694-1630 specifications and include comprehensive supply chain traceability, such as serial numbers, date codes, and batch identification. Additionally, the provider must adhere to Counterfeit Detection and Avoidance Program standards and deliver both the physical power module units and their corresponding inspection records. The contract is associated with the Department of the Navy and the SPRMM1 DLA Mechanicsburg agency, with performance taking place in Mechanicsburg, Pennsylvania. It falls under NAICS code 335312 and was posted on September 22, 2026, with a response deadline of October 22, 2026.

Motor and Generator Manufacturing

POSTED

DEADLINE

Manufacture and Supply of Valve Manifold (NSN 4820-01-213-4051)This subcontract involves the manufacture and supply of a precision Valve Manifold, identified by NSN 4820-01-213-4051, for prime contractors supporting NAVSUP WSS Maritime projects. The contractor is responsible for fabricating the manifold according to TDP Version 05, adhering to Cage Code 99657 and reference 283063-0001. All deliverables must meet strict military standards, including marking per MIL-STD-130, REV N and packaging per MIL-STD-2073. The agreement requires full supply chain traceability and CDAP compliance to ensure quality and security. The finished manifolds are to be delivered to a specified naval shipping destination. This project is managed under the Department of the Navy via the SPRMM1 DLA Mechanicsburg agency, with the place of performance located in Mechanicsburg, Pennsylvania.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Hardware/Firmware Configuration Management ServicesThis subcontract for Hardware/Firmware Configuration Management Services supports prime contractors delivering DLA supply contracts through the Department of the Navy. The scope of work involves maintaining the total equipment baseline for disk drive unit hardware, software, and firmware, while providing detailed contract specifications for performance functions, interchangeability, and inspection and testing criteria. The contractor is responsible for verifying that no configuration changes occur for superseding part numbers and delivering comprehensive configuration baseline reports and technical specifications. The opportunity is managed by SPRMM1 DLA Mechanicsburg and is performed in Mechanicsburg, Pennsylvania. It falls under NAICS code 541513. The solicitation was posted on September 22, 2026, with a response deadline of October 22, 2026.

Computer Facilities Management Services

POSTED

DEADLINE

OEM Disk Drive Unit SupplierThis subcontract opportunity, managed by the Department of the Navy for DLA Mechanicsburg, seeks an OEM or authorized distributor to supply disk drive units for prime contractors. The required hardware must match reference numbers 7Y193 and 0ZQ52, including all necessary firmware and software. The selected supplier must ensure full supply chain traceability, batch identification, and CDAP compliance, delivering both the physical units and the corresponding documentation. Interested parties must respond by October 22, 2026, for performance in Mechanicsburg, Pennsylvania, under NAICS code 423430.

Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

DEADLINE

GAGE,DIFFERENTIAL,D — 6685016668884 — SPRMM126QKJ14

Solicitation # SPRMM1-26-Q-KJ14

This solicitation, issued by DLA Mechanicsburg for the Department of the Navy, seeks the manufacture and delivery of a Differential Gage (NSN 6685-01-666-8884) to support the USS MASSACHUSETTS (SSN 798). The item must conform to the design represented by Cage Code 05991, reference number 19NCXXX0X15E1BXAXX04, and adhere to TDP Version 001. The contract is a fixed-price small business small purchase, with award evaluations based on the Lowest Price Technique for technically acceptable offers. Delivery is required as soon as possible on an FOB Destination basis, with inspection and acceptance occurring at the origin. Key technical and quality requirements include strict adherence to MIL-STD-130 Rev N for physical identification and MIL-STD-2073 for preservation and packaging. The material must be entirely mercury-free to prevent corrosion and toxicity risks on submarines and surface ships. Contractors are responsible for all inspection requirements, though the Government reserves the right to perform its own inspections. Administrative requirements include the use of the Wide Area Workflow (WAWF) system for invoicing and payment, and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Offerors must be authorized distributors of the original manufacturer and provide proof of such authorization on company letterhead.

Other Measuring and Controlling Device Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS