Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

NDT Inspection Services (UT/VT)

Active

Federal

Response Deadline10/23/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for NDT Inspection Services involves performing non-destructive testing for prime contractors on IMF vessel projects at the Puget Sound Naval Shipyard. The scope of work requires conducting ultrasonic thickness measurements at 700 specific sites across the underwater body, hull, and freeboard, as well as visual inspections of the hull, freeboard, and all three decks. All testing must be performed using ultrasonic thickness gauges and visual inspection tools in accordance with ASTM weld inspection standards. The successful contractor is responsible for delivering documented UT/VT inspection reports as specified in CDRL A032. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense.

General Info

NDT inspection services for IMF vessels at Puget Sound Naval Shipyard via NAICS 541380.

Agency

Department Of Defense → Puget Sound Naval Shipyard IMFView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

WA

Set-Aside

NONE

Documents

This scope was carved out of N4523A26Q1012.

The full solicitation package (13 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Maintenance, Repair and Preservation of YT-811

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 22

subcontract

Response DeadlineOct 23

Submission deadline

Response Deadline

10/23/2026, 09:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Puget Sound Naval Shipyard IMF

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Puget Sound Naval Shipyard IMF

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs non-destructive testing (NDT) for prime contractors on Puget Sound Naval Shipyard IMF vessel projects. Conducts Ultrasonic Test (UT) measurements of the underwater body, hull, and freeboard at 700 specific sites and Visual Inspections (VT) of the hull, freeboard, and all three decks. Utilizes ultrasonic thickness gauges and VT tools per ASTM weld inspections. Delivers documented UT/VT inspection reports (CDRL A032).

Similar Contracts

Same NAICS industry code

Geotechnical and Materials Testing Services for Waterline Replacement Project in Hemet, CA

Solicitation # CIP 5661

Albert A. Webb Associates is seeking a qualified small and disadvantaged business firm to serve as a subconsultant for the City of Hemet's Oakland and Santa Fe Waterline Replacement project, identified as CIP 5661. The project is funded through a U.S. Environmental Protection Agency Community Grant and is estimated to span approximately 210 construction working days. The selected subconsultant will be responsible for geotechnical and materials inspection and testing services, including initial sampling and acceptance testing of proposed materials, as well as ongoing material and compaction testing for roadway subgrade, aggregate base, trench backfill, pipe bedding, and trench bottom. A key deliverable is a certification memorandum signed by a professional engineer identifying any non-complying materials. The contract requires strict adherence to federal and state regulations, including EPA Disadvantaged Business Enterprise requirements under 40 CFR Part 33, the Build America, Buy America Act, and California prevailing wage laws. Subcontractors must be registered with the Department of Industrial Relations and comply with the California Levine Act regarding campaign contribution disclosures. The award is contingent upon the selection of Albert A. Webb Associates by the City of Hemet. Interested firms must provide a technical proposal, a fee proposal based on lump sum, unit price, and hourly rates, and documentation of their small or disadvantaged business certifications.

Albert A. Webb Associates

POSTED

about 3 hours ago

DEADLINE

Production Lot Test (PLT) ServicesThis subcontract for Production Lot Test (PLT) Services, managed by the Department of Defense ASC Commodities Division, involves performing specialized testing and validation on production lots of cable assemblies for prime contractors on DLA Aviation projects. The scope of work requires executing tests to verify electrical continuity, signal integrity, and physical tolerances according to NSN 6150-01-091-6485, utilizing equipment such as multimeters, oscilloscopes, or automated cable testers to deliver certified test reports. The project falls under NAICS code 541380 and is to be performed in New Cumberland, Pennsylvania. Interested parties must respond by September 30, 2026, following the posting date of September 22, 2026.

ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

Quality Assurance and Inspection ServicesThis subcontract for Quality Assurance and Inspection Services involves the attribute and variable inspection of 24 manufactured ground rods for prime contractors under the ASC Supplier Oper AE and AF Div. The scope of work requires the execution of inspection plans based on MIL-STD-1916 to verify that material properties and dimensions align with the Technical Data Package. The contractor will utilize precision metrology tools, including calipers and micrometers, to perform these evaluations. Final deliverables include detailed inspection reports and certifications of compliance. The performance of these services is located in Cherry Point, and the project falls under NAICS code 541380.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

Quality Testing and Certification Services (PLT)This subcontract for Quality Testing and Certification Services focuses on performing Production Lot Testing for prime contractors delivering DLA supply contracts. The selected provider will utilize metrology and testing equipment to measure actual results against the tolerances specified in the technical data package, ensuring all deliverables meet the required standards. The scope of work includes generating formal test reports and process certifications acceptable to the DLA, with a final delivery of certified reports detailing actual results and tolerances. This requirement is managed by the ASC Commodities Division of the Department of Defense, with the place of performance located at Hill AFB, Utah.

ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

First Article Test (FAT) for Conduit AssembliesThis subcontract involves performing First Article Testing for conduit assemblies to support prime contractors delivering DLA Aviation supply contracts. The primary objective is to conduct testing on the first production unit of NSN 5975-01-532-0286 to ensure full compliance with technical specifications, material integrity, and dimensional accuracy. Using precision measurement equipment to validate NSN data, the provider will deliver a formal FAT Report and an approved first article sample. The project is managed by the Department of Defense under the ASC Supplier Oper AE and AF Div, with performance taking place in New Cumberland, Pennsylvania. Classified under NAICS code 541380, the opportunity was posted on September 22, 2026, with a response deadline of September 30, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

First Article Test (FAT) Coordination and ExecutionThis subcontract for the Department of Defense ASC Commodities Division involves the coordination and execution of First Article Testing to support prime contractors delivering DLA supply contracts. The primary objective is to validate manufacturing processes and product specifications by verifying material properties, dimensions, and quality standards. This technical validation is performed using specialized metrology and inspection equipment, including micrometers and Coordinate Measuring Machines. The selected provider is responsible for submitting detailed test results for government approval and delivering the final FAT Report along with approved first-article samples. The work is designated under NAICS code 541380 and will be performed in Texarkana, Texas. The solicitation was posted on September 22, 2026, with a response deadline of September 30, 2026.

ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

First Article Test (FAT) and Quality Validation ServicesThis subcontract for First Article Test and Quality Validation Services supports prime contractors on Defense Logistics Agency projects. The selected provider will perform specialized attribute or variable inspections according to MIL-STD-1916 and validate material properties and dimensions against 98897 series drawings. The primary deliverables include certified test reports and validated First Article units. The contract is managed by the Department of Defense under the ASC Supplier Oper AE and AF Div, with performance taking place at Robins Air Force Base. Due to the handling of export-controlled technical data, the provider must maintain ITAR registration and CMMC Level 2 certification. The opportunity is categorized under NAICS code 541380, with a response deadline of September 30, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

Independent Testing AgencyThe City of Pickering is seeking a subcontracted Independent Testing Agency to perform independent inspection and testing of installed electrical systems for prime contractors on various facility projects. The selected provider will utilize specialized electrical testing and diagnostic equipment to verify installations and must hold independent third-party certification to ensure compliance and quality. The primary responsibility of the contractor is to deliver formal inspection and final test reports to both the City and the prime contractor. This opportunity was posted on September 22, 2026, with a response deadline of October 14, 2026.

City of Pickering

POSTED

about 16 hours ago

DEADLINE

Geotechnical and Construction Material Testing

City of Grande Prairie

POSTED

about 17 hours ago

DEADLINE

LPM Testing and Validation ServicesThe LPM Testing and Validation Services subcontract, issued by Navsea HQ under the Department of Defense, involves the technical testing and evaluation of LPMs for prime contractors on submarine projects. The scope of work includes executing the Type 20 and Type 24 Test Requirements Matrix and validating Classified Annex requirements through the use of environmental and pressure testing chambers. To fulfill these requirements, the contractor must maintain a SECRET Facility Clearance and ensure full compliance with NISPOM standards. The primary deliverables for this engagement are the submission of detailed test reports and official validation certificates. This opportunity falls under NAICS code 541380, with a response deadline of October 20, 2026.

POSTED

about 19 hours ago

DEADLINE

First Article Testing (FAT) and Validation ServicesThis small business set-aside subcontract for DLA Land Warren involves providing First Article Testing and Validation Services for a single unit of manufactured hardware. The contractor is responsible for executing technical tests according to the Technical Data Package and MIL-STD 1916 sampling standards, while coordinating with DCMA for final inspection and acceptance. The primary deliverables include one validated test unit and a completed First Article Test Report. To qualify for this engagement, the provider must maintain US/Canada Joint Certification Program status and ensure full compliance with CMMC and NIST SP 800-171 standards for the secure handling of technical data. The solicitation was posted on September 22, 2026, with a response deadline of October 23, 2026, under NAICS code 541380.

DLA Land Warren

POSTED

about 19 hours ago

DEADLINE

in about 1 month

PSC 4610 Cathodic Protection Inspection Services

Solicitation # 36C26026Q0982

The Department of Veterans Affairs is seeking an experienced cathodic protection service technician to inspect the water tower system at the Jonathan M. Wainwright VA Medical Center in Walla Walla, Washington. This combined solicitation, identified by number 36C26026Q0982, falls under NAICS code 541380 and is designated as a total set-aside for small businesses. The opportunity was posted on September 22, 2026, with a response deadline of October 10, 2026. Interested parties should coordinate with the primary point of contact, Contract Specialist Tyrone Whalen, through the Network Contract Office 20 based in Vancouver, Washington.

260-NETWORK Contract Office 20 (36C260)

POSTED

about 19 hours ago

DEADLINE

More opportunities from Department Of Defense → Puget Sound Naval Shipyard IMF

Same awarding agency

Hull Blasting and PreservationThis subcontract for Hull Blasting and Preservation supports prime contractors on Puget Sound Naval Shipyard IMF vessel projects. The scope of work involves comprehensive surface preparation and coating, including washing and cleaning vessels upon docking, abrasive blasting, and the preservation of the underwater hull, freeboard, bulwarks, and handrails. Additionally, the contractor is responsible for applying non-skid materials to the main, first, and second decks to deliver a fully blasted and preserved hull and deck system. All operations must strictly adhere to OSHA hot work regulations and NAVSEA standards. The opportunity is categorized under NAICS code 238320 and is managed by the Department of Defense. Interested parties must respond by the deadline of October 23, 2026.

Painting and Wall Covering Contractors

POSTED

about 19 hours ago

DEADLINE

in about 1 month

Marine Supply (Zinc Anodes & Placards)This subcontract for the Puget Sound Naval Shipyard IMF involves the supply of sacrificial zinc anodes and vessel identification labels for prime contractors. The scope of work includes providing hull protection anodes that adhere to government marine specifications, as well as all necessary placards and labels for the main, first, and second decks of the vessels. The opportunity is categorized under NAICS code 332710 and is managed by the Department of Defense. Interested parties must submit their responses by October 23, 2026, following the posting date of September 22, 2026.

POSTED

about 19 hours ago

DEADLINE

in about 1 month

Structural Welding and FabricationThis subcontract for Structural Welding and Fabrication supports prime contractors on Puget Sound Naval Shipyard IMF vessel projects. The scope of work involves performing metal repairs to the hull and superstructure, specifically focusing on hull and winch valves, deckhouse expansion joints, and various structural components. All work must be executed using marine-grade steel and alloys, with welding performed in strict accordance with ANSI/AWS D1.1/D1.2 standards to ensure the delivery of repaired structural components and watertight valves. The opportunity is managed by the Department of Defense under the Puget Sound Naval Shipyard IMF, falling under NAICS code 238120. The response deadline for this requirement is October 23, 2026.

Structural Steel and Precast Concrete Contractors

POSTED

about 19 hours ago

DEADLINE

in about 1 month

Tank Maintenance and Hydrostatic TestingThis subcontract for Tank Maintenance and Hydrostatic Testing supports prime contractors on Puget Sound Naval Shipyard IMF vessel projects. The scope of work involves the cleaning, preservation, and pressure testing of various vessel tanks, including fuel oil, waste oil, day tanks, potable water, ballast, and CHT tanks, as well as performing hydrostatic testing on overhauled coolers. The contractor is responsible for delivering certified hydrostatic test reports and preserved tanks while adhering to CDRL A050, A057, and A058 reporting requirements. This opportunity falls under NAICS code 811310 and is managed by the Department of Defense for the Puget Sound Naval Shipyard IMF.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 19 hours ago

DEADLINE

in about 1 month

Hydraulic Systems & Hose ReplacementThis subcontract involves the supply and installation of hydraulic components and hoses for prime contractors working on IMF vessel projects at the Puget Sound Naval Shipyard. The scope of work includes replacing hydraulic hoses for the brow systems, mast, and deck winch, as well as overhauling the mast hydraulic ram and replacing associated pins and bushings. All provided hoses must adhere to SAE 100R19/EN 853 and SAE 100R13/EN 856 standards. Managed under the Department of Defense for the Puget Sound Naval Shipyard IMF, the project falls under NAICS code 811310. The contract requires the delivery of the overhauled hydraulic ram and all replaced hoses. The solicitation was posted on September 22, 2026, with a response deadline of October 23, 2026.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 19 hours ago

DEADLINE

in about 1 month

Marine Electrical RepairsThis subcontract for Marine Electrical Repairs involves the installation and repair of vessel lighting and electrical wiring for prime contractors on Puget Sound Naval Shipyard IMF projects. The scope of work includes repairing mast and deckhouse lighting, installing new electrical wiring for navigation and flood lights, and installing new gaskets for bilge impressed anodes. All work must be performed in accordance with drawings 8774028 Rev 3 and 8774036 Rev 1 to ensure the delivery of fully operational lighting systems. The project falls under NAICS code 238210 and is managed by the Department of Defense for the Puget Sound Naval Shipyard IMF. The solicitation was posted on September 22, 2026, with a response deadline of October 23, 2026.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 19 hours ago

DEADLINE

in about 1 month

Maintenance, Repair and Preservation of YT-811

Solicitation # N4523A26Q1012

The U.S. Navy, through the Regional Maintenance Center at Puget Sound Naval Shipyard & Intermediate Maintenance Facility, is conducting market research to identify qualified contractors capable of performing comprehensive maintenance, repair, and preservation work on the Harbor Tug Medium YT-811 Olympus, a four-year-old steel-hulled vessel measuring 90 feet in length with a 38-foot, 5-inch beam and a 16-foot draft. The work must be conducted at the contractor’s facility within the Puget Sound region, defined as the West Coast of the continental United States from Olympia, Washington northward to Bellingham, Washington. The scope includes transporting the vessel to the contractor’s site, cleaning and blast-preserving all underwater hull surfaces, freeboard, bulwarks, handrails, and decks, performing ultrasonic and visual inspections, repairing hull valves and deckhouse expansion joints, servicing and preserving all fluid tanks and systems, replacing hydraulic hoses and placards, conducting winch control modifications, overhauling mast hydraulic components, and repairing lighting systems. The work is anticipated to occur between March and May 2027, with the Government responsible for vessel transport to and from the contractor’s facility. Interested parties must submit a notice of interest on official letterhead, including point of contact details, a brief company profile, and responses to four specific questions regarding business size under NAICS code 336611, relevant past performance within the last three years, organizational and technical capabilities, and intent to submit a formal proposal if an RFP is issued. Responses are due by 12:00 PM Pacific Time on August 4, 2026, and must be emailed with the subject line “YT-811 Sources Sought Response.” This is a sources sought announcement only and does not constitute a solicitation; no contractual obligation is created, and the Government will not reimburse respondents for costs incurred. All submitted information will be treated as confidential and exempt from public release under the Freedom of Information Act. Participation in this market research does not guarantee inclusion in future procurement events, and any eventual solicitation will be posted on SAM.gov, which potential offerors are responsible for monitoring.

Ship Building and Repairing

POSTED

about 19 hours ago

DEADLINE

in about 1 month

Mechanical Alignment & Inspection ServicesThis subcontract for Mechanical Alignment and Inspection Services supports prime contractors on Puget Sound Naval Shipyard IMF barge projects under the Department of Defense. The scope of work involves performing precision mechanical and electrical alignments and quality inspections, utilizing laser alignment and dial indicators to verify assembly procedures, sizes, and clearances. The service provider is responsible for documenting all alignments according to manufacturer specifications and technical manuals. Final deliverables include comprehensive alignment reports and Objective Quality Evidence data packages. This opportunity falls under NAICS code 541330, with a response deadline of October 28, 2026.

Engineering Services

POSTED

DEADLINE

in about 1 month

Marine Painting & Coating SupplyThis subcontract for Marine Painting and Coating Supply supports prime contractors operating on Puget Sound Naval Shipyard IMF barge projects. The selected provider is responsible for delivering commercial marine quality paint and a specialized flammable storage locker designed to maintain materials according to manufacturer data sheets and all applicable federal, state, and local laws. The opportunity is managed under the Department of Defense for the Puget Sound Naval Shipyard IMF, falling under NAICS code 325510. Interested parties must submit their responses by October 28, 2026.

Paint and Coating Manufacturing

POSTED

DEADLINE

in about 1 month

Fastener & Hardware SupplyThis subcontract opportunity with the Department of Defense involves the supply of marine-grade threaded fasteners and hardware for prime contractors working on Puget Sound Naval Shipyard IMF barge projects. The scope of work specifically requires the delivery of bolts and nuts that meet the strict technical requirements and compliance standards set forth in NSTM Chapter 075. The procurement is categorized under NAICS code 332999 and was posted on September 21, 2026. Interested parties must submit their responses by the deadline of October 28, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

in about 1 month

Temporary Shore Power & Electrical ServicesThis subcontract for Temporary Shore Power and Electrical Services involves the supply and installation of temporary electrical power for prime contractors working on Puget Sound Naval Shipyard IMF barge projects. The contractor must provide a 440 volt, 60 Hertz, 3-Phase, 400 amp electrical service utilizing Leviton 22R24 Style color-coded male plug assemblies, ensuring all phase rotation adheres to drawing 11084-300. Qualified bidders must hold a valid electrical license to deliver operational temporary shore power services. The opportunity is categorized under NAICS code 238210, with a response deadline set for October 28, 2026.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

in about 1 month

Marine Piping & Valve InstallationThis subcontract for Marine Piping and Valve Installation supports prime contractors on Puget Sound Naval Shipyard IMF barge projects. The scope of work involves the installation and repair of piping systems, valves, and fittings using marine-grade materials. All work must be performed in strict compliance with MIL-STD-777, and the final deliverable consists of fully installed and tested piping systems. The opportunity is categorized under NAICS code 238220 and is managed by the Department of Defense for the Puget Sound Naval Shipyard IMF. Interested parties must submit their responses by the deadline of October 28, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

in about 1 month

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS