Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Diesel Engine and Machinery Maintenance

Open

Federal

Response Deadline11/18/2026, 12:00:00 PM PST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Diesel Engine and Machinery Maintenance supports prime contractors on Puget Sound Naval Shipyard IMF projects under the Department of Defense. The scope of work involves comprehensive maintenance of cargo pump diesel engines and generators, specifically including coolant flushes, oil analysis, and valve clearance adjustments. Technical requirements mandate that starter and alternator output tests be conducted in strict accordance with the YON 322 Cargo Engine Tech Manual. The contractor is responsible for the delivery of fully serviced and certified machinery. This opportunity falls under NAICS code 811310, with a response deadline set for November 18, 2026.

General Info

Subcontract for diesel engine and machinery maintenance at Puget Sound Naval Shipyard.

Agency

Department Of Defense → Puget Sound Naval Shipyard IMF

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

WA, USA

Set-Aside

NONE

Documents

This scope was carved out of N4523A27Q1004.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Maintenance, Repair, and Preservation of YON-325

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 5

subcontract

Response DeadlineNov 18

Submission deadline

Response Deadline

11/18/2026, 12:00:00 PM PSTin 13 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Puget Sound Naval Shipyard IMF

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Puget Sound Naval Shipyard IMF

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs machinery maintenance for prime contractors on Puget Sound Naval Shipyard IMF projects. Services cargo pump diesel engines and generators, including valve clearance adjustments, oil analysis, and coolant flushes. Conducts starter and alternator output tests per the YON 322 Cargo Engine Tech Manual. Delivers serviced and certified machinery.

Similar Contracts

Same NAICS industry code

Commercial Kitchen Equipment Repair ServicesThis subcontract for Commercial Kitchen Equipment Repair Services involves providing specialized mechanical and electrical repairs for prime contractors working on Jefferson Parish Government facility projects. The scope of work focuses on the maintenance and repair of specific industrial equipment, including Southbend tilt skillets, Vulcan Hart steamers, Vulcan kettles, and Univex choppers, all of which must be serviced according to OEM specifications. Key technical tasks include the replacement of water boards, condensate thermostats, thermocouples, and temperature boards to ensure all equipment is delivered in fully operational condition with accompanying written warranties. To be eligible for this contract, providers must hold a valid Louisiana State Contractors License in both Electrical and Mechanical disciplines. The solicitation was posted on November 5, 2026, with a response deadline of November 17, 2026. This opportunity falls under NAICS code 811310 and is managed through the Jefferson Parish Government in Louisiana.

Jefferson Parish Government

POSTED

about 9 hours ago

DEADLINE

Repair Kitchen Equipment

Solicitation # 336

The Jefferson Parish Government is soliciting bids for the repair of kitchen equipment at the Jefferson Parish Correctional Center located in Gretna, Louisiana. The scope of work includes providing all labor, materials, tools, and testing necessary to repair two Southbend Tilt Skillets, one Vulcan Hart Steamer, one Vulcan Kettle, and one Univex Chopper. All repairs must utilize genuine OEM replacement parts and be performed in accordance with manufacturer specifications. The contractor is responsible for obtaining all necessary permits from the City of Gretna and the Jefferson Parish Department of Inspection and Code Enforcement, and must test each unit to ensure proper operation upon completion. The contract will be awarded to the lowest responsive and responsible bidder. Mandatory requirements for eligibility include possessing a Louisiana State Contractors License with a class in Electrical and Mechanical. The successful bidder must provide final insurance certificates complying with Jefferson Parish resolutions within ten calendar days of the bid opening or risk rejection. Work must be performed during normal business hours, from 7:00 a.m. to 5:00 p.m., Monday through Friday, although contractors may work off-hours at no additional cost to the Parish to ensure safety. Bidders are required to inspect the site and equipment prior to submission to determine the necessary labor and materials.

Jefferson Parish Government

POSTED

about 9 hours ago

DEADLINE

Ultrasonic and Magnetic Flow Meter Calibration ServicesThis subcontract involves providing professional calibration services for ultrasonic and magnetic flow meters to support prime contractors on Jefferson Parish Government sewerage projects in Louisiana. The scope of work specifically covers the calibration of Pulsar Ultra 3, 4, and 5 units, GE Panametrics Model AT868, and ABB Magnetic Flowmeters equipped with ABB C1300 Recorders across four treatment plants located on the West Bank. All services must be performed in strict compliance with LDEQ discharge permits to ensure regulatory adherence. The selected provider is responsible for delivering fully calibrated flow meters along with official certification reports. The solicitation was posted on November 5, 2026, with a response deadline of November 20, 2026, falling under NAICS code 811310.

Jefferson Parish Government

POSTED

about 10 hours ago

DEADLINE

SCALE MAINTENANCE SERVICES - IFB 26C541002

Solicitation # 26C541002

The State of California Department of the California Highway Patrol is soliciting bids for scale maintenance services at the Castaic Commercial Vehicle Enforcement Facility in Santa Clarita, California. The contractor is responsible for providing all labor, materials, tools, and supervision to perform preventive maintenance in accordance with manufacturer recommendations. Services must be conducted during normal working hours, Monday through Friday from 8:00 a.m. to 5:00 p.m., and require the contractor to check in and out with the on-site CHP contact for every service call. To be eligible, bidders must possess a C-61 / D-21 Machinery and Pumps License from the Contractor State Licensing Board and a local business license. Additionally, the contractor must provide a Certificate of Accuracy traceable to the National Bureau of Standards and comply with the California Business and Professions Code and the California Code of Regulations regarding performance standards for scales. The contract will be awarded based on the low bid method, with the net bid price serving as the primary evaluation factor. While the Disabled Veteran Business Enterprise participation requirement has been waived, incentives are available for DVBE, Small Business, Microbusiness, and Nonprofit Veteran Service Agency certifications, with a cumulative adjustment limit of 10 percent or 100,000 dollars. Bidders must submit a physical bid package in a sealed envelope to the CHP Business Services Section in Sacramento, as electronic submissions via email or fax are prohibited. Required documentation includes a bid form, client references, and various certifications, including compliance with the Darfur Contracting Act and drug-free workplace requirements. All work must adhere to the Uniform Building Code, Uniform Plumbing Code, National Electric Code, and Cal/OSHA safety standards.

State of California

POSTED

about 14 hours ago

DEADLINE

Fire Extinguisher Maintenance and RechargingThis subcontract for Fire Extinguisher Maintenance and Recharging involves providing annual inspections and as-needed recharging services for portable fire extinguishers across Metro Regional Transit Authority facility and fleet projects. The scope of work includes the inspection of over 300 units and the recharging of 5 lb. and 10 lb. extinguishers, which encompasses the replacement of essential components such as pins, O-rings, collars, and labels. The selected contractor must hold the necessary certifications for handling pressurized extinguishers and is responsible for delivering both the certified equipment and detailed maintenance logs. This opportunity is categorized under NAICS code 811310, with a response deadline set for December 17, 2026.

POSTED

about 17 hours ago

DEADLINE

in about 1 month

Specialized Laboratory Systems MaintenanceThis subcontract opportunity involves providing specialized maintenance for laboratory systems at Navy Medical Research Unit South facilities in Lima, Peru. The scope of work focuses on performing both preventive and unscheduled maintenance, including the calibration and repair of lab-specific refrigeration and HVAC systems. The primary objective is to ensure and deliver a certified operational status for all critical laboratory equipment. Managed under the Department of Defense through the W2SR Endist Caribbean, the project falls under NAICS code 811310. Interested parties must note the response deadline of November 18, 2026, to submit their proposals for these essential technical services on USACE projects.

W2SR Endist Caribbean(provis)

POSTED

about 17 hours ago

DEADLINE

General Mechanical PM and Corrosion ControlThis subcontract opportunity, titled General Mechanical PM and Corrosion Control, involves providing routine mechanical preventative maintenance and surface protection for prime contractors on USAFE projects located at Ramstein AB, Germany. The scope of work includes lubricating moving parts, performing localized rust remediation with protective coatings, changing compressor oil and filters, and purging moisture from pneumatic lines. All activities must be conducted in strict adherence to OSHA safety guidelines. The project is managed under the Department of Defense, specifically agency FA5641 764 Ess Pk, and falls under NAICS code 811310. Contractors are required to deliver completed preventative maintenance checklists and detailed rust remediation reports. The solicitation was posted on November 5, 2026, with a response deadline of November 16, 2026.

FA5641 764 Ess Pk

POSTED

about 17 hours ago

DEADLINE

Multi-Unit Series Drivetrain AlignmentThis subcontract, titled Multi-Unit Series Drivetrain Alignment, involves providing specialized technical services for prime contractors on Air Force Test Center projects under the Department of Defense. The scope of work focuses on the reconnection and precision cold alignment of a compressor drive system, which includes reconnecting the compressor to the motor and aft compressor using shim packs and couplers, as well as reconnecting all necessary hydraulic lines. To ensure operational accuracy, the contractor must utilize precision laser alignment systems and adhere strictly to Allis Chalmers axial compressor specifications. The final deliverable is a fully connected and aligned drive system. This opportunity is categorized under NAICS code 811310 and is managed by the FA9101 Aedc Pkp Procrmnt Branch.

FA9101 Aedc Pkp Procrmnt Branch

POSTED

about 17 hours ago

DEADLINE

DI/RO Type I Water System Preventative Maintenance and RepairThis subcontract involves providing preventative maintenance and technical repairs for a DI/RO Type I Ultra-Pure Water System located at Wright-Patterson Air Force Base. Working under prime contractors for the Air Force Life Cycle Management Center, the selected provider will ensure the delivery of a fully operational water system by performing annual replacements of eight water tanks and conducting operational checks to maintain a water quality standard of 18.2 Megohm. The scope of work includes troubleshooting both electrical and mechanical components in accordance with RS Means 2026 standards. This requirement falls under NAICS code 811310 and is managed by the Department of Defense. Interested parties must adhere to the response deadline of November 23, 2026.

FA8601 Aflcmc Pzio

POSTED

about 17 hours ago

DEADLINE

Portable Fire Extinguisher Inspection, Recharge, and Hydrostatic TestingThis subcontract involves the maintenance, recharging, and certification of approximately 948 portable fire extinguishers for prime contractors working on Department of Veterans Affairs facility projects in North Little Rock, Arkansas. The scope of work includes conducting hydrostatic testing of cylinders and replacing damaged components in strict accordance with NFPA 10 and UL listings. To qualify, the provider must possess a PHMSA Requalifier Identification Number and deliver fully operational, recharged, and tagged extinguishers accompanied by asset-level digital reports. The opportunity is categorized under NAICS code 811310 and is managed by the Department of Veterans Affairs Network Contract Office 16. Interested parties must submit their responses by November 20, 2026.

256-NETWORK Contract Office 16 (36C256)

POSTED

about 17 hours ago

DEADLINE

Kitchen Fire Suppression System Inspection and MaintenanceThis subcontract involves the semiannual inspection, testing, and maintenance of 10 wet-chemical fire suppression systems for prime contractors working on Department of Veterans Affairs facility projects in North Little Rock, Arkansas. The selected provider must ensure all systems are operational using calibrated test equipment in strict accordance with NFPA 17A standards. Final deliverables include fully serviced and tagged systems accompanied by detailed digital service reports. To qualify, contractors must be registered with the Arkansas Fire Protection Licensing Board and hold specific manufacturer authorizations for both Ansul and Pyro-Chem systems. This opportunity falls under NAICS code 811310 and is managed by the Department of Veterans Affairs Network Contract Office 16. Responses are due by November 20, 2026.

256-NETWORK Contract Office 16 (36C256)

POSTED

about 17 hours ago

DEADLINE

Hydrostatic Testing of Halotron I Fire ExtinguishersThis subcontract involves providing hydrostatic testing and visual examinations for 81 Amerex B674 Wheeled Halotron I cylinders at Marine Corps Air Station Iwakuni in Japan. The selected contractor will perform 100 percent inspections in strict accordance with NFPA 10, CGA C-1, CGA C-6, and DOT Title 49 CFR Part 180 standards. The scope of work requires the use of calibrated hydrostatic test pumps and expansion measurement tools to ensure all cylinders are properly marked and labeled. The final deliverable consists of 81 certified, tested, and labeled fire extinguishers. This project is managed under the Department of Defense for the Commanding Officer, falling under NAICS code 811310. The response deadline for this opportunity is November 29, 2026.

Commanding Officer

POSTED

about 17 hours ago

DEADLINE

More opportunities from Department Of Defense → Puget Sound Naval Shipyard IMF

Same awarding agency

Certified Marine Chemist / Gas Free ServicesThis subcontract for the Puget Sound Naval Shipyard IMF involves providing specialized gas-freeing and safety certification services for prime contractors. The primary objective is to certify tanks and voids as Safe for Workers and Safe for Hot Work to ensure operational safety. The selected provider is required to deliver signed gas-free certifications as part of the CDRL A027 requirements. To qualify for this role, the provider must be a Certified Marine Chemist or a Certified Industrial Hygienist in accordance with 29 CFR 1915. This opportunity falls under NAICS code 541620 and is managed by the Department of Defense. Interested parties must respond by November 18, 2026.

Environmental Consulting Services

POSTED

about 17 hours ago

DEADLINE

Marine Material SupplyThis subcontract for the Puget Sound Naval Shipyard IMF involves the supply of specialized marine materials to prime contractors. The scope of work includes providing zinc anodes, CRES 316 drain and vent plugs, and specific gaskets such as Garlock Blue-Guard 3000 or Flexitallic SF2401. Additionally, the provider must supply replacement solar panels and MIL-PRF-16173-E Class 2, Grade 3 rust preservative, ensuring all delivered materials strictly adhere to Navy specifications. Managed under the Department of Defense with NAICS code 332710, the opportunity was posted on November 5, 2026. Interested parties must submit their responses by the deadline of November 18, 2026.

POSTED

about 17 hours ago

DEADLINE

Marine Electrical and InstrumentationThis subcontract for Marine Electrical and Instrumentation involves performing specialized electrical repairs for prime contractors on Puget Sound Naval Shipyard IMF projects. The scope of work specifically includes the calibration of Tank Level Indicators within the Machinery Room and the replacement of clear ball sight glasses. All activities must be executed in strict adherence to MIL-STD-2003-3B(SH) and ISO-5302690 standards to ensure the delivery of certified electrical installations and calibrated instrumentation. Managed under the Department of Defense for the Puget Sound Naval Shipyard IMF, the project falls under NAICS code 238210. The solicitation was posted on November 5, 2026, with a response deadline set for November 18, 2026.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 17 hours ago

DEADLINE

Marine Piping and Valve SpecialistThis subcontract for the Marine Piping and Valve Specialist involves performing critical piping modifications for prime contractors on Puget Sound Naval Shipyard IMF projects. The scope of work includes rebuilding 10-inch Double Block Bleed valves and modifying cargo piping to remove flow meters. Additionally, the contractor is responsible for installing CRES 316 spools and fuel oil tank piping, utilizing Garlock Blue-Guard 3000 or Flexitallic SF2401 gaskets in strict accordance with ASME B 16.20 standards to ensure the delivery of fully leak-tested piping systems. Managed under the Department of Defense for the Puget Sound Naval Shipyard IMF, this opportunity falls under NAICS code 238220. The solicitation was posted on November 5, 2026, with a response deadline set for November 18, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 17 hours ago

DEADLINE

Non-Destructive Testing (NDT) and InspectionThis subcontract for Non-Destructive Testing (NDT) and Inspection supports prime contractors on Puget Sound Naval Shipyard IMF projects under the Department of Defense. The scope of work involves specialized structural testing, including ultrasonic thickness measurements, fuel injector flow tests, and air testing of tanks and skegs at 2 PSI. All activities must strictly adhere to T9074-AS-GIB-010/271 standards. The selected provider is responsible for delivering comprehensive inspection reports and maintaining all necessary NDT certifications. This opportunity falls under NAICS code 541380, with a response deadline set for November 18, 2026.

Testing Laboratories and Services

POSTED

about 17 hours ago

DEADLINE

Marine Structural Welding and FabricationThis subcontract for Marine Structural Welding and Fabrication involves performing specialized steel repairs for prime contractors on Puget Sound Naval Shipyard IMF projects. The scope of work includes the removal of trip hazard stanchions and the installation of CRES 316 drain and vent plugs. Additionally, the contractor is responsible for executing structural repairs to the hull and superstructure in strict accordance with MIL-STD-1310 REV H and AWS D1.1 standards. To ensure quality and safety, the contractor must perform a 100 percent visual inspection of all completed welds and deliver certified structural repairs. This Department of Defense project falls under NAICS code 336611, with a response deadline set for November 18, 2026.

Ship Building and Repairing

POSTED

about 17 hours ago

DEADLINE

Hull Preservation and Industrial CoatingThis subcontract for Hull Preservation and Industrial Coating supports prime contractors on Puget Sound Naval Shipyard IMF projects under the Department of Defense. The scope of work focuses on comprehensive surface preparation and preservation, specifically targeting the underwater hull, freeboard, and main deck. Required activities include abrasive blasting and solvent cleaning in accordance with SSPC-SP-1, SSPC-SP-10, and SSPC-SP-11 standards, as well as the cleaning of non-skid surfaces. The contractor is responsible for delivering fully preserved and painted vessel surfaces and must provide detailed technical reports regarding surface profiles and dry film thickness. This opportunity falls under NAICS code 238120, with a response deadline set for November 18, 2026.

Structural Steel and Precast Concrete Contractors

POSTED

about 17 hours ago

DEADLINE

Marine Towing and Docking ServicesThis subcontract for Marine Towing and Docking Services supports prime contractors on Puget Sound Naval Shipyard IMF projects under the Department of Defense. The scope of work involves the transport of the YON-325 vessel from the Manchester Fuel Depot to a repair facility and its subsequent return. The contractor is responsible for the safe docking and undocking of the vessel, which includes the development of comprehensive docking procedures and blocking plans in accordance with drawing 7642547. A critical requirement of the contract is the provision of a certified Dock Master who must be accepted by the Government Docking Observer to ensure operational safety and compliance. The project falls under NAICS code 336611, with a response deadline set for November 18, 2026.

Ship Building and Repairing

POSTED

about 17 hours ago

DEADLINE

Maintenance, Repair, and Preservation of YON-325

Solicitation # N4523A27Q1004

The Puget Sound Naval Shipyard and Intermediate Maintenance Facility is conducting market research to identify capable sources for the maintenance, repair, and preservation of the YON-325, a 21-year-old steel hull vessel. The estimated period of performance is from August 2027 through November 2027. The work must be performed at a contractor facility located within the Puget Sound, Washington region, defined as the West Coast of the continental US from Olympia to Bellingham. The contractor is responsible for transporting the vessel from the Manchester Fuel Depot to their facility and returning it upon completion. The scope of work includes comprehensive preservation of the underwater hull, freeboard, main deck, deck house, and cargo piping, utilizing specific surface preparation standards such as SSPC-SP-1, SSPC-SP-10, and SSPC-SP-11. Key technical requirements involve replacing zinc anodes, modifying piping to eliminate the aft flow meter, replacing solar panels and fuel oil tank piping, and calibrating cargo tank level indicators at the Manchester Fuel Depot. Additionally, the contractor must perform ultrasonic testing, air tests of tanks and voids, and maintenance on the cargo pump diesel and diesel generator. All work must adhere to MIL-STD-1310 REV H and T9074-AS-GIB-010/271 standards. Interested firms under NAICS code 336611 must submit a notice of interest by November 18, 2026, detailing their business size, past performance, and current ship repair agreements.

Ship Building and Repairing

POSTED

about 17 hours ago

DEADLINE

Hull and Structural Steel RepairThis subcontract for Hull and Structural Steel Repair supports prime contractors on NAVSEA RCD Barge projects for the Puget Sound Naval Shipyard IMF under the Department of Defense. The scope of work involves performing critical repairs to the hull, main deck, superstructure, and structural members. Key tasks include cutting and preparing plating, welding hull plates, and repairing tanks and voids to ensure they are completely leak-free using commercial marine quality plating and structural steel. To ensure quality and safety, all welders must be certified according to AWS and ABS Rules for Materials and Welding 2020 Part 2. The final deliverable consists of repaired and certified hull components. This opportunity is categorized under NAICS code 331511, with a response deadline of November 13, 2026.

POSTED

DEADLINE

Marine Weld Inspection and NDTThis subcontract for Marine Weld Inspection and NDT, issued by the Puget Sound Naval Shipyard IMF under the Department of Defense, involves performing non-destructive testing on new welds for prime contractors on NAVSEA RCD Barge projects. The selected provider will utilize X-ray, ultrasonic, or dye-penetrant testing equipment to verify structural integrity, ensuring all work strictly adheres to American Bureau of Shipping requirements. The scope of work includes the delivery of comprehensive NDT inspection reports and necessary weld certifications. This opportunity falls under NAICS code 541380 and was posted on November 4, 2026, with a response deadline of November 13, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

Certified Marine Chemist and Gas Free ServicesThis subcontract opportunity with the Puget Sound Naval Shipyard IMF under the Department of Defense involves providing certified gas-free testing and industrial hygiene services for prime contractors on NAVSEA RCD Barge projects. The selected provider will be responsible for monitoring atmospheres to ensure safety for hot work and certifying safe entry for personnel through the use of specialized gas detection and atmospheric monitoring equipment. To qualify for this role, personnel must hold NFPA Marine Chemist and Certified Industrial Hygienist certifications in accordance with 29 CFR 1915. The primary deliverable for these services is the issuance of official gas-free certificates. Interested parties should note the response deadline of November 13, 2026, for this requirement categorized under NAICS code 541620.

Environmental Consulting Services

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Industrial Washer and Dryer Repair

0409 Aq Hq Contract

POSTED

about 17 hours ago

DEADLINE

Material Handling Equipment (MHE) Repair Services

Solicitation # N0018927QL011

Navsup Flt Logistics Ctr Norfolk

POSTED

about 17 hours ago

DEADLINE

STX San I Pak Autoclave Warranty Service

Solicitation # 36C25727P0025

257-NETWORK Contract Office 17 (36C257)

POSTED

about 17 hours ago

DEADLINE

John Day Below-the-Hook Lifting Devices Repair and Recertification

Solicitation # PANNWD-26-P-032256

W071 Endist Portland

POSTED

about 17 hours ago

DEADLINE

Hydrostatic Testing

Solicitation # M6740027Q0001

Commanding Officer

POSTED

about 17 hours ago

DEADLINE

Intent to Sole Source X-Ray Spectrometer Preventative Maintenance

Solicitation # 27SIMACQJC000000109

Fleet Readiness Center

POSTED

about 17 hours ago

DEADLINE

PES E-Unit Footer Repair

Solicitation # FA9101_PESEUNITREPAIR

FA9101 Aedc Pkp Procrmnt Branch

POSTED

about 17 hours ago

DEADLINE

USS AMERICA (LHA-6) MATERIAL HANDLING EQUIPMENT (MHE) REFURBISHMENT

Solicitation # N0024427R0005

Navsup Flt Logistics Ctr San Diego

POSTED

about 17 hours ago

DEADLINE

J012--Kitchen Exhaust Cleaning, Kitchen Fire Suppression System Service, and Portable Fire Extinguisher Service

Solicitation # 36C25627Q0131

256-NETWORK Contract Office 16 (36C256)

POSTED

about 17 hours ago

DEADLINE

SSDG ENGINE BERGEN AIR DISTRIBUTOR

Solicitation # N3220527Q7036

POSTED

about 17 hours ago

DEADLINE

in about 11 hours

J079--Housekeeping Equipment Maintenance

Solicitation # 36C26127Q0152

261-NETWORK Contract Office 21 (36C261)

POSTED

about 17 hours ago

DEADLINE

J065--Medtronic Service Agreement

Solicitation # 36C24627Q0058

246-NETWORK Contracting Office 6 (36C246)

POSTED

about 17 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS