Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Marine Piping and Valve Specialist

Open

Federal

Response Deadline11/18/2026, 12:00:00 PM PST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for the Marine Piping and Valve Specialist involves performing critical piping modifications for prime contractors on Puget Sound Naval Shipyard IMF projects. The scope of work includes rebuilding 10-inch Double Block Bleed valves and modifying cargo piping to remove flow meters. Additionally, the contractor is responsible for installing CRES 316 spools and fuel oil tank piping, utilizing Garlock Blue-Guard 3000 or Flexitallic SF2401 gaskets in strict accordance with ASME B 16.20 standards to ensure the delivery of fully leak-tested piping systems. Managed under the Department of Defense for the Puget Sound Naval Shipyard IMF, this opportunity falls under NAICS code 238220. The solicitation was posted on November 5, 2026, with a response deadline set for November 18, 2026.

General Info

Subcontract for piping modifications and valve rebuilding at Puget Sound Naval Shipyard.

Agency

Department Of Defense → Puget Sound Naval Shipyard IMF

NAICS

238220 - Plumbing, Heating, and Air-Conditioning Contractors

Place of Performance

WA, USA

Set-Aside

NONE

Documents

This scope was carved out of N4523A27Q1004.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Maintenance, Repair, and Preservation of YON-325

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 5

subcontract

Response DeadlineNov 18

Submission deadline

Response Deadline

11/18/2026, 12:00:00 PM PSTin 13 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Puget Sound Naval Shipyard IMF

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Puget Sound Naval Shipyard IMF

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs piping modifications for prime contractors on Puget Sound Naval Shipyard IMF projects. Rebuilds 10-inch Double Block Bleed valves and modifies cargo piping to eliminate flow meters. Installs CRES 316 spools and fuel oil tank piping using Garlock Blue-Guard 3000 or Flexitallic SF2401 gaskets per ASME B 16.20. Delivers leak-tested piping systems.

Similar Contracts

Same NAICS industry code

Install Pier D High Pressure Air System, NSBREM-724-A

Solicitation # N4425527RB003

Solicitation N4425527RB003 is a Design-Build project for the installation of a permanent high pressure air (HPA) system at Pier D, B724A of Naval Base Kitsap in Bremerton, Washington. This effort is a 100% set-aside for 8(a) businesses located within SBA Region X, with an estimated construction magnitude between $1,000,000 and $5,000,000. The scope of work requires the contractor to provide all design, construction, commissioning, materials, and equipment to incorporate existing HPA cross connections into a system supplied by compressors on the south end of Pier D. The project specifically includes the installation of HPA shore risers at five designated bollard locations (East #11, #59, #101 and West #47, #59), with all new piping run under service grates and valves positioned topside. The contract is a Firm-Fixed-Price task order with a period of performance of 538 calendar days from award. Award will be based on price and MACC past performance, determined by the proposal most advantageous to the government. Key technical requirements include adherence to UFC and ASME codes, EM 385-1-1 safety standards, and MIL-STD101C piping color coding. The contractor must manage strict security and access protocols, including DBIDS installation access and foreign interest determinations. Deliverables include cost-loaded Network Analysis Schedules and comprehensive O&M data. Final acceptance is contingent upon a multi-stage inspection process, including a punch list and performance verification testing certified by the Designer of Record.

Bristol Alliance of Companies

POSTED

about 6 hours ago

DEADLINE

Water Pump Replacement

Solicitation # water-pump-replacement

The Cassadaga Job Corps Center in New York is soliciting bids for a water pump replacement project at their Pump House. The scope of work involves removing existing end suction centrifugal pumps and check valves to install a new booster pump system featuring two pumps with variable speed drives and automatic tower fill valves. The project also requires the installation of a hydro pneumatic expansion tank, 3 inch Type L copper piping with sweat fittings, and fiberglass insulation on all piping, concluding with final testing and factory startup. This solicitation is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by November 30, 2026. The project falls under NAICS code 238220 and is managed by primary point of contact Derrick Dickerson.

Cassadaga Job Corps Center

POSTED

about 6 hours ago

DEADLINE

CBP#9772 HVAC Air Handling Unit (AHU) and Ductwork Cleaning Services

Solicitation # CBP#9772

Management & Training Corporation (MTC) is soliciting bids for a fixed-price, single lump sum subcontract to provide HVAC Air Handling Unit (AHU) and ductwork cleaning services at the Edison Job Corps Center in Edison, New Jersey. The scope of work includes the thorough cleaning of twelve AHUs and twenty-eight specified coils across the Kilmer and Edison dormitories, as well as the cleaning of supply, return, and outside-air ductwork. The contractor is responsible for providing and installing durable, corrosion-resistant access panels where necessary and must provide a final project report featuring pre-cleaning photographs and documentation of existing conditions. All work must be completed within 90 consecutive business days following a written Notice to Proceed. The estimated contract value ranges from $100,000 to $250,000, with awards based on overall best value. Mandatory bid requirements include a physical site visit, a completed itemized pricing schedule, and a written acknowledgment of the full scope of work. For bids of $25,000 or more, a bid bond of 20% is required, and the awarded contractor must provide performance and payment bonds from a surety company with at least an A- rating. This opportunity is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. Compliance with Davis-Bacon prevailing wage determinations for Middlesex County and various FAR regulations regarding business size certification and debarment disclosure is required.

Edison Job Corps

POSTED

about 6 hours ago

DEADLINE

CBP7787 ED1 RM 123 HVAC Compressor Replacement

Solicitation # CBP7787 ED1 RM 123

Management & Training Corporation (MTC) is soliciting bids for a fixed-price, single lump sum subcontract to replace a failed HVAC/refrigeration compressor at the ED1 Building of the Sierra Nevada Job Corps Center in Reno, Nevada. The project scope encompasses four primary phases: preparation and environmental safety, including refrigerant recovery per EPA Section 608 regulations; demolition and removal of the failed unit; installation of an OEM-specified compressor with new filter-driers and heaters; and system testing and commissioning. The estimated price range for this effort is between 0 and 25,000 dollars, with bids evaluated based on overall best value. Prospective bidders must complete a mandatory physical site visit and sign an attendance roster prior to submission. Required bid documentation includes a detailed cost breakout on company letterhead and, for bids equal to or greater than 25,000 dollars, a bid bond guarantee of 20 percent of the base bid. Awarded contractors must provide a Unique Entity Identifier (UEI) number, an SF 1413 Statement and Acknowledgement form, and maintain general liability insurance of at least 1 million dollars and worker's compensation with employer's liability of 500,000 dollars. Performance and payment bonds are required for contracts 25,000 dollars or more. Labor must comply with Washoe County wage determinations, and final payment is contingent upon a successful final inspection and the submission of a final certified payroll report.

Sierra Nevada Job Corps Center

POSTED

about 6 hours ago

DEADLINE

MJCC Multiple HVAC Replacement System

Solicitation # mjcc-multiple-hvac-replacement-system

The Montgomery Job Corps Center, through Education and Training Resources (ETR), is seeking quotes for a turnkey subcontracting project to replace multiple HVAC systems at its facility in Montgomery, Alabama. The scope of work involves the removal of existing equipment and the installation, testing, and commissioning of new units across several buildings, including specific requirements for 3.5-ton, 4-ton, 7.5-ton, and 10-ton systems. Technical specifications require the use of R-454B refrigerant, Energy Star certification with a minimum EER rating of 16 for certain units, and a 90 percent efficiency furnace. All work must comply with the National Electrical Code, NFPA Standard No. 101 Life Safety Code, and OSHA regulations. The project requires a 5 to 10 year warranty on equipment parts and a 2 year warranty on workmanship, with final payment contingent upon a signed punch list and applicable warranties. This is a small business set-aside opportunity open to VOSB, SDVOSB, WOSB, and HUBZone certified entities. Interested bidders must provide a current SAM.gov UEI number, active registration, Alabama business licenses, a W-9, and FFATA and Anti-Lobbying certifications. Submissions must include a completed bid sheet with a detailed cost breakdown, certificates of insurance, and a proposed performance schedule. The Davis-Bacon Act applies, requiring prevailing wages and certified payroll records. Bonding requirements are tiered based on project value, requiring a 100 percent payment bond for projects over 35,000 dollars and both performance and payment bonds for projects exceeding 150,000 dollars. Bids are due by November 27, 2026, at 12:00 PM CST.

Montgomery Job Corps Center

POSTED

about 6 hours ago

DEADLINE

Joliet Job Corps-Request for Quote HVAC Replacement Female Dormitory

Solicitation # joliet-job-corps-request-quote-hvac-replacement-female-dormitory

Management and Training Corporation is seeking bids for a fixed-price, single lump sum subcontract to replace the HVAC system at the Joliet Job Corps Center female dormitory in Illinois. The project involves the removal and disposal of existing equipment and the installation of ten new Carrier furnace and air conditioning systems, along with the integration of a Pelican Building Automation System across eleven units. The estimated value of the contract ranges from $250,000 to $500,000. Bids must be submitted to Frances McGraw by November 23, 2026, and must include a detailed cost breakout, a signed bid form, and a completed supplier self-certification packet. A physical site visit and signature on the attendance roster are mandatory prerequisites for bid submission. Award decisions will be based on overall best value. For bids of $25,000 or more, contractors must provide a bid bond equal to 20% of the base bid and subsequent performance and payment bonds from a surety company with at least an A- rating. The project is subject to the Davis-Bacon Act, requiring compliance with specific Illinois prevailing wage rates and the submission of certified payroll. Additionally, contractors must maintain general liability insurance of at least $1,000,000 and worker's compensation insurance with employer's liability limits of $500,000. Compliance with various Federal Acquisition Regulation clauses is required, including those regarding Buy American standards, small business representation, and the disclosure of debarment status for first-tier subcontractors exceeding $45,000.

Joliet Job Corps

POSTED

about 6 hours ago

DEADLINE

ACT-0124-00 BNATCS: Installation of two (2) existing Chillers Bldg. 366 at the Willima J. Hughes Technical Center, Atlantic City, NJ

Solicitation # act-0124-00-bnatcs-installation-two-2-existing-chillers-bldg-366-willima-j-hughes-technical-center

This solicitation, managed by PTSI Managed Services Inc., involves the installation of two existing chillers at Building 366 of the William J. Hughes Technical Center in Atlantic City, New Jersey. The scope of work encompasses the installation of electrical power, control interface connections, and chilled water piping, as well as the final start-up of the equipment. The estimated magnitude of construction for this project is between 250,000 and 500,000 dollars. The project is categorized under NAICS codes 238210, 238220, and 238290 and is designated as a small business set-aside, including eligibility for VOSB, SDVOSB, WOSB, and HUBZone certified businesses. Interested parties must submit their responses by the deadline of November 18, 2026. Denise Buergey serves as the primary point of contact for this opportunity.

PTSI Managed Services Inc.

POSTED

about 6 hours ago

DEADLINE

Centennial Dry Sprinkler System & Compressor Replacement Services

Solicitation # centennial-dry-sprinkler-system-compressor-replacement-services

Management & Training Corporation is soliciting bids for a fixed-price, single lump sum subcontract to provide dry-type sprinkler system and compressor replacement services at the Centennial Job Corps Center in Nampa, Idaho. The project scope involves the Men's Dormitory, Women's Dormitory, and Recreation Building, focusing on eliminating system leaks and replacing failing infrastructure to prevent air compressor short-cycling. Key deliverables include the demolition and removal of the existing distribution piping network and air compressor, followed by the installation of a new system that meets NFPA 25 standards. The awarded contractor must complete all work within 30 consecutive business days after receiving a written Notice to Proceed. Bids are due by December 1, 2026, and must be submitted via email to Sandra Clore. A mandatory physical site visit and signature on the attendance roster are required prior to bid submission. Bids will be evaluated based on overall best value and must include a detailed cost breakout. For bids equal to or greater than $25,000, a bid bond of 20% of the base bid is required at submission, and performance and payment bonds from an A-rated surety company will be required upon award. The solicitation is set aside for HUBZone, Woman-owned, and Service-Disabled Veteran-owned small businesses under NAICS code 238220. Contractors must be certified to operate in Idaho and comply with union prevailing wage rates as per wage determination ID20250106. Compliance requirements include providing weekly certified payroll reports, adhering to FAR regulations regarding whistleblower rights and security, and disclosing debarment status for subcontracts exceeding $45,000. Final payment is contingent upon a successful final inspection, the submission of a Notice of Final Completion, a Certificate of Release of Liens, and the delivery of two complete sets of Operation and Maintenance manuals.

Management & Training Corporation/Centennial Job Corps Center

POSTED

about 6 hours ago

DEADLINE

Dorm Hot Water Tank Replacement – Glenmont Job Corps Center – S26-006

Solicitation # S26-006

Adams and Associates, Inc. is seeking qualified mechanical and plumbing contractors for solicitation S26-006 to replace domestic hot water storage tanks and associated equipment at the Glenmont Job Corps Center in Glenmont, New York. The project involves the removal and disposal of four existing tanks and the installation of four new 500-gallon insulated storage tanks, four heat exchangers, and one bronze Bell and Gossett circulator pump in the North Dormitory. The scope of work includes all necessary piping modifications, electrical disconnections and reconnections, insulation, rigging, and the provision of a temporary hot water heater to ensure the facility remains operational during the estimated construction period of two and a half to three weeks. This is a subcontracting opportunity, not a direct federal procurement, and is open to various small business set-asides including VOSB, SDVOSB, WOSB, and HUBZone. Proposals are due by November 9, 2026, at 4:00 PM ET, and will be evaluated based on price (60 percent), quality (20 percent), past performance (10 percent), and schedule (10 percent). Awardees must comply with New York State statutory insurance requirements and Davis-Bacon prevailing wage determinations. Required submission documents include a completed vendor questionnaire with UEI and NAICS code, a current W-9, New York State licenses, and certificates of insurance. Payment terms are Net 30 days upon completion and receipt of invoice.

Adams and Associates, Inc.

POSTED

about 6 hours ago

DEADLINE

Roswell JCC – Male Dormitory Bldg. Water Source Heat Pump Replacement (20 units)

Solicitation # roswell-jcc-male-dormitory-bldg-water-source-heat-pump-replacement-20-units

The Career Systems Development Corporation is soliciting proposals for the total replacement of twenty ceiling-mounted water source heat pumps at the Roswell Job Corps Center Male Dormitory Building 558 in New Mexico. The scope of work includes the removal and off-site disposal of twenty failed units and the installation of new Bosch 1-ton units or an equivalent model. The project requires a comprehensive installation encompassing ducting, electrical, thermostat wiring, flexible hoses, and pressure valves. Additionally, the contractor must perform plenum safety upgrades by installing smoke dampers with fusible links in all vents leading into the plenum and ensuring all installed plenum materials are plenum-rated. Contractors must be licensed, certified, and insured, adhering to NFPA 101, NFPA 70, and all applicable plumbing, mechanical, and building codes. This project is subject to the Davis Bacon Act Wage Determination NM20260014, requiring the submission and approval of weekly certified payroll reports prior to invoice payment. Proposals exceeding $100,000.00 require 100% payment and performance bonding upon award. Submissions must include a safety and compliance plan, a detailed cost breakdown for materials, labor, and bonding, equipment cut sheets, warranty information, and a proposed payment schedule. Final deliverables include the turnover of operation manuals to the Facility Manager upon project completion.

Career Systems Development Corporation

POSTED

about 6 hours ago

DEADLINE

in about 19 hours

Inland Empire Job Corps-Request for Quote HVAC Replacement Cafeteria & OA CTS

Solicitation # inland-empire-job-corps-request-quote-hvac-replacement-cafeteria-oa-cts

Management & Training Corporation (MTC) is seeking bids for a subcontracting opportunity to replace packaged HVAC units with gas heating at the Inland Empire Job Corps Center in San Bernardino, California. The project focuses on the Cafeteria and OA/CTS areas and includes the removal of existing units, refrigerant recovery per EPA regulations, installation of new high-efficiency units, and the modification of gas piping, ductwork, and electrical disconnects. This is a fixed-price, single lump sum contract with an estimated value between $25,000 and $100,000. Bids must be submitted by November 23, 2026, and will be evaluated based on overall best value. Mandatory requirements for bidders include a physical site visit, a bid bond of 20% for bids $25,000 or greater, and the use of a surety company with at least an A- rating. Awarded contractors must provide performance and payment bonds and comply with Construction Wage Rate Requirements, paying prevailing wages as specified in General Decision CA20260026. Submissions must include a detailed cost breakout on company letterhead, the MTC Bid for Lump Sum Contract form, a W-9, and a Supplier Self-Certification form. The project also mandates strict adherence to OSHA safety standards, the provision of personal protective equipment, and compliance with FAR clauses regarding small business utilization and first-tier subcontractor reporting.

Inland Empire Job Corps

POSTED

about 6 hours ago

DEADLINE

CBP7792 Cafeteria Hot Water Heater Replacement

Solicitation # CBP7792

Management & Training Corporation (MTC) is soliciting bids for a fixed-price, single lump sum subcontract to replace a failing commercial natural gas-fired water heater at the Sierra Nevada Job Corps Center in Reno, Nevada. The project requires a qualified, licensed plumbing contractor to isolate, remove, and dispose of the existing unit and install a new commercial-grade 125-gallon natural gas-fired water heater of equivalent capacity. The estimated price range for this effort is between $25,000 and $100,000. Bids will be evaluated based on overall best value, considering price, quality, delivery schedule, and relevant experience. The selected contractor must comply with federal standards, including the Davis-Bacon Act and specific wage determinations for building construction in Washoe County. For bids equal to or greater than $25,000, a bid bond of 20% is required, along with performance and payment bonds from an A-rated surety company. Awarded contractors must provide a Unique Entity Identifier (UEI) and adhere to various FAR clauses regarding labor standards, the Buy American Act, and the Federal Funding Accountability and Transparency Act for contracts over $40,000. Deliverables include the installation of the unit, two sets of operation and maintenance manuals, and manufacturer and installer warranties. Final acceptance is contingent upon a facility walkthrough, verification of safety controls, and the absence of leaks. Payment will be processed via pay applications using AIA G702 and G703 forms, with a standard payment term of ten days after receipt. Bids must include a detailed cost breakout on company letterhead and be submitted by the specified deadline.

Sierra Nevada Job Corps Center

POSTED

about 6 hours ago

DEADLINE

More opportunities from Department Of Defense → Puget Sound Naval Shipyard IMF

Same awarding agency

Certified Marine Chemist / Gas Free ServicesThis subcontract for the Puget Sound Naval Shipyard IMF involves providing specialized gas-freeing and safety certification services for prime contractors. The primary objective is to certify tanks and voids as Safe for Workers and Safe for Hot Work to ensure operational safety. The selected provider is required to deliver signed gas-free certifications as part of the CDRL A027 requirements. To qualify for this role, the provider must be a Certified Marine Chemist or a Certified Industrial Hygienist in accordance with 29 CFR 1915. This opportunity falls under NAICS code 541620 and is managed by the Department of Defense. Interested parties must respond by November 18, 2026.

Environmental Consulting Services

POSTED

about 17 hours ago

DEADLINE

Marine Material SupplyThis subcontract for the Puget Sound Naval Shipyard IMF involves the supply of specialized marine materials to prime contractors. The scope of work includes providing zinc anodes, CRES 316 drain and vent plugs, and specific gaskets such as Garlock Blue-Guard 3000 or Flexitallic SF2401. Additionally, the provider must supply replacement solar panels and MIL-PRF-16173-E Class 2, Grade 3 rust preservative, ensuring all delivered materials strictly adhere to Navy specifications. Managed under the Department of Defense with NAICS code 332710, the opportunity was posted on November 5, 2026. Interested parties must submit their responses by the deadline of November 18, 2026.

POSTED

about 17 hours ago

DEADLINE

Marine Electrical and InstrumentationThis subcontract for Marine Electrical and Instrumentation involves performing specialized electrical repairs for prime contractors on Puget Sound Naval Shipyard IMF projects. The scope of work specifically includes the calibration of Tank Level Indicators within the Machinery Room and the replacement of clear ball sight glasses. All activities must be executed in strict adherence to MIL-STD-2003-3B(SH) and ISO-5302690 standards to ensure the delivery of certified electrical installations and calibrated instrumentation. Managed under the Department of Defense for the Puget Sound Naval Shipyard IMF, the project falls under NAICS code 238210. The solicitation was posted on November 5, 2026, with a response deadline set for November 18, 2026.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 17 hours ago

DEADLINE

Diesel Engine and Machinery MaintenanceThis subcontract for Diesel Engine and Machinery Maintenance supports prime contractors on Puget Sound Naval Shipyard IMF projects under the Department of Defense. The scope of work involves comprehensive maintenance of cargo pump diesel engines and generators, specifically including coolant flushes, oil analysis, and valve clearance adjustments. Technical requirements mandate that starter and alternator output tests be conducted in strict accordance with the YON 322 Cargo Engine Tech Manual. The contractor is responsible for the delivery of fully serviced and certified machinery. This opportunity falls under NAICS code 811310, with a response deadline set for November 18, 2026.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 17 hours ago

DEADLINE

Non-Destructive Testing (NDT) and InspectionThis subcontract for Non-Destructive Testing (NDT) and Inspection supports prime contractors on Puget Sound Naval Shipyard IMF projects under the Department of Defense. The scope of work involves specialized structural testing, including ultrasonic thickness measurements, fuel injector flow tests, and air testing of tanks and skegs at 2 PSI. All activities must strictly adhere to T9074-AS-GIB-010/271 standards. The selected provider is responsible for delivering comprehensive inspection reports and maintaining all necessary NDT certifications. This opportunity falls under NAICS code 541380, with a response deadline set for November 18, 2026.

Testing Laboratories and Services

POSTED

about 17 hours ago

DEADLINE

Marine Structural Welding and FabricationThis subcontract for Marine Structural Welding and Fabrication involves performing specialized steel repairs for prime contractors on Puget Sound Naval Shipyard IMF projects. The scope of work includes the removal of trip hazard stanchions and the installation of CRES 316 drain and vent plugs. Additionally, the contractor is responsible for executing structural repairs to the hull and superstructure in strict accordance with MIL-STD-1310 REV H and AWS D1.1 standards. To ensure quality and safety, the contractor must perform a 100 percent visual inspection of all completed welds and deliver certified structural repairs. This Department of Defense project falls under NAICS code 336611, with a response deadline set for November 18, 2026.

Ship Building and Repairing

POSTED

about 17 hours ago

DEADLINE

Hull Preservation and Industrial CoatingThis subcontract for Hull Preservation and Industrial Coating supports prime contractors on Puget Sound Naval Shipyard IMF projects under the Department of Defense. The scope of work focuses on comprehensive surface preparation and preservation, specifically targeting the underwater hull, freeboard, and main deck. Required activities include abrasive blasting and solvent cleaning in accordance with SSPC-SP-1, SSPC-SP-10, and SSPC-SP-11 standards, as well as the cleaning of non-skid surfaces. The contractor is responsible for delivering fully preserved and painted vessel surfaces and must provide detailed technical reports regarding surface profiles and dry film thickness. This opportunity falls under NAICS code 238120, with a response deadline set for November 18, 2026.

Structural Steel and Precast Concrete Contractors

POSTED

about 17 hours ago

DEADLINE

Marine Towing and Docking ServicesThis subcontract for Marine Towing and Docking Services supports prime contractors on Puget Sound Naval Shipyard IMF projects under the Department of Defense. The scope of work involves the transport of the YON-325 vessel from the Manchester Fuel Depot to a repair facility and its subsequent return. The contractor is responsible for the safe docking and undocking of the vessel, which includes the development of comprehensive docking procedures and blocking plans in accordance with drawing 7642547. A critical requirement of the contract is the provision of a certified Dock Master who must be accepted by the Government Docking Observer to ensure operational safety and compliance. The project falls under NAICS code 336611, with a response deadline set for November 18, 2026.

Ship Building and Repairing

POSTED

about 17 hours ago

DEADLINE

Maintenance, Repair, and Preservation of YON-325

Solicitation # N4523A27Q1004

The Puget Sound Naval Shipyard and Intermediate Maintenance Facility is conducting market research to identify capable sources for the maintenance, repair, and preservation of the YON-325, a 21-year-old steel hull vessel. The estimated period of performance is from August 2027 through November 2027. The work must be performed at a contractor facility located within the Puget Sound, Washington region, defined as the West Coast of the continental US from Olympia to Bellingham. The contractor is responsible for transporting the vessel from the Manchester Fuel Depot to their facility and returning it upon completion. The scope of work includes comprehensive preservation of the underwater hull, freeboard, main deck, deck house, and cargo piping, utilizing specific surface preparation standards such as SSPC-SP-1, SSPC-SP-10, and SSPC-SP-11. Key technical requirements involve replacing zinc anodes, modifying piping to eliminate the aft flow meter, replacing solar panels and fuel oil tank piping, and calibrating cargo tank level indicators at the Manchester Fuel Depot. Additionally, the contractor must perform ultrasonic testing, air tests of tanks and voids, and maintenance on the cargo pump diesel and diesel generator. All work must adhere to MIL-STD-1310 REV H and T9074-AS-GIB-010/271 standards. Interested firms under NAICS code 336611 must submit a notice of interest by November 18, 2026, detailing their business size, past performance, and current ship repair agreements.

Ship Building and Repairing

POSTED

about 17 hours ago

DEADLINE

Hull and Structural Steel RepairThis subcontract for Hull and Structural Steel Repair supports prime contractors on NAVSEA RCD Barge projects for the Puget Sound Naval Shipyard IMF under the Department of Defense. The scope of work involves performing critical repairs to the hull, main deck, superstructure, and structural members. Key tasks include cutting and preparing plating, welding hull plates, and repairing tanks and voids to ensure they are completely leak-free using commercial marine quality plating and structural steel. To ensure quality and safety, all welders must be certified according to AWS and ABS Rules for Materials and Welding 2020 Part 2. The final deliverable consists of repaired and certified hull components. This opportunity is categorized under NAICS code 331511, with a response deadline of November 13, 2026.

POSTED

DEADLINE

Marine Weld Inspection and NDTThis subcontract for Marine Weld Inspection and NDT, issued by the Puget Sound Naval Shipyard IMF under the Department of Defense, involves performing non-destructive testing on new welds for prime contractors on NAVSEA RCD Barge projects. The selected provider will utilize X-ray, ultrasonic, or dye-penetrant testing equipment to verify structural integrity, ensuring all work strictly adheres to American Bureau of Shipping requirements. The scope of work includes the delivery of comprehensive NDT inspection reports and necessary weld certifications. This opportunity falls under NAICS code 541380 and was posted on November 4, 2026, with a response deadline of November 13, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

Certified Marine Chemist and Gas Free ServicesThis subcontract opportunity with the Puget Sound Naval Shipyard IMF under the Department of Defense involves providing certified gas-free testing and industrial hygiene services for prime contractors on NAVSEA RCD Barge projects. The selected provider will be responsible for monitoring atmospheres to ensure safety for hot work and certifying safe entry for personnel through the use of specialized gas detection and atmospheric monitoring equipment. To qualify for this role, personnel must hold NFPA Marine Chemist and Certified Industrial Hygienist certifications in accordance with 29 CFR 1915. The primary deliverable for these services is the issuance of official gas-free certificates. Interested parties should note the response deadline of November 13, 2026, for this requirement categorized under NAICS code 541620.

Environmental Consulting Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS