Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CLAMP, LOOP.

Active
SPE7LX-26-U-8888Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract, identified as CLAMP, LOOP, is a solicitation under number SPE7LX-26-U-8888 issued by the Strategic Acquisition Program Directorate within the Department of Defense for the procurement of eight units of a specific clamp and loop component with NSN 5340-00-582-1474. The solicitation is a total small business set-aside under NAICS code 332510, with responses due by August 5, 2026, and an anticipated delivery deadline of 48 days after award. The contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, subject to any amendment updates. Strict prohibitions apply against the intentional addition of mercury or mercury-containing compounds to the supplied hardware, except for specific functional applications including batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, and chemical reagents authorized by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment boundary to prevent leakage, per NAVSEA 5100-003D. All government identification must be removed from non-accepted supplies, and full compliance with these stipulations is mandatory for contract fulfillment.

General Info

Eight clamp and loop units procured under small business set-aside, due August 5, 2026, no mercury except authorized uses.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
View Agency Profile
Office AddressUS
Contacts
Theodore Misiolek
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CLAMP, LOOP.
CLAMP, LOOP
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
ADEQUATE DATA FOR NSN/Part Number: 5340-00-582-1474 Quantity: 8 EA Purchase Request: 1000237690QTY: 8 Delivery: 48 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
PLATE, MOUNTINGThe contract pertains to the procurement of a single mounting plate, identified by NSN 5340-01-508-3732 and part number 7139998, under solicitation SPE7L1-26-T-857W. The item is to be delivered in one unit within 20 days of contract award, with delivery terms set at FOB origin and no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129, including specific packaging codes, methods, and marking requirements without special markings. The item is not classified as hazardous, and palletization must adhere to DLA packaging standards. Delivery is directed to the Distribution Management Office at Camp Kinser, Japan, with transportation governed by DLA procedural notes C19 and C20. The contract references the DLA Master List of Technical and Quality Requirements for all technical and quality specifications, with the applicable revision controlled by the solicitation issue date. The purchase request number is 7017559669, and the required delivery date is July 17, 2026. The contract is under the Department of Defense’s Land Supply Chain, with the primary point of contact being Michael Nordahl, and the solicitation response deadline is August 3, 2026.
LAND SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
PLUG, EXPANSIONThe contract is for the procurement of 24 units of PLUG, EXPANSION with NSN 5340-01-509-7937 under solicitation SPE7L0-26-T-0375, issued by the Department of Defense through the Land Supply Chain ESOCS Buys office. Delivery is required within five days of contract award and must be shipped FOB origin to the Letterkenny Army Depot in Chambersburg, Pennsylvania, using the fastest traceable means, explicitly prohibiting parcel post. The item is designated as a critical application item for Cummins Inc part number 3093782, and no ozone-depleting chemicals may be used in its manufacture or packaging, with any substitute chemicals requiring prior approval unless authorized by specification. Packaging must comply fully with MIL-STD-2073-1E and MIL-STD-129 for marking, with a U code for packaging, no special marking required, and palletization per DLA standards. The unit of issue is each, priced at $24.00 per unit, with zero variance allowed in quantity. Inspection and acceptance occur at the destination. The required delivery date is July 20, 2026, and all technical and quality requirements referenced by R or I numbers are governed by the current DLA Master List of Technical and Quality Requirements as of the solicitation issue date.
LAND SUPPLY CHAIN ESOC BUYS

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
RING, RETAININGThe contract covers the procurement of 1,585 retaining rings with NSN 5325-00-169-8023 under solicitation SPE4A6-26-T-08HH, with a delivery deadline of 171 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with revision control based on solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have government identification removed. Items must bear physical identification per bare item marking requirements. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Item Unique Identification is not required per customer request. Tailored quality requirements apply to both manufacturers and non-manufacturers, with inspection and acceptance occurring at origin. Technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, with DFARS 252.225-7048 enforcing compliance. Access to controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA authorization. The place of performance is New Cumberland, PA, and the point of contact is Monica Clark of the ASC Commodities Division, Department of Defense.
ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
MH60GUIDEXThe contract MH60GUIDEX under solicitation SPE4A1-26-T-2470 pertains to the procurement of 23 units identified by NSN 5340-01-521-7001 for delivery to Robins AFB, Georgia, with a deadline of 171 days after award. It mandates compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 requirements as a certified third-party assessment organization and incorporates stringent controls for Covered Defense Information, requiring adherence to DLA’s technical and quality standards referenced in the Master List. The supplier must retain supply chain traceability documentation per DLAD Procurement Note C03 from August 2016, and while Item Unique Identification is not required, removal of government identification from non-accepted supplies is mandated. Packaging must comply with DLA standards, and technical data associated with the item is subject to export control under ITAR or EAR, restricting access to contractors with approved JCP certification, completed training, and DLA authorization. Sampling procedures must conform to MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with specified verification levels and AQLs for critical, major, and minor attributes; if unspecified, attributes are deemed major. Sikorsky Corporation’s alternate sampling plan QAP 1201 is acceptable provided it meets or exceeds the performance of MIL-STD-1916 or ASQ H1331, and zero non-conformances are required unless otherwise stipulated. Measuring and test equipment must be calibrated and controlled, and all technical data must be protected against unauthorized export, including to foreign nationals within the U.S., under DFARS 252.225-7048. The contract is issued by the Department of Defense’s Aviation Supply Chain under NAICS code 332510, with Monneka Giles as the primary point of contact, and the solicitation was posted on July 21, 2026, with responses due by July 29, 2026.
AVIATION SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLINDThe contract is for the procurement of 167 units of blind rivets with NSN 5320-01-460-3819 under solicitation SPE4A6-26-T-08QP, issued by the Department of Defense’s ASC Commodities Division. Delivery is required within 20 days of award, with shipment originating FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951, unless superseded by stricter DLA Master List of Technical and Quality Requirements. Packaging and labeling must adhere to MIL-STD-129, and palletization must follow DLA packaging standards. The rivets are to be shipped by traceable freight methods, explicitly prohibiting parcel post, to the designated Tinker AFB delivery point. The required delivery date is July 15, 2026, with the solicitation open for response until July 29, 2026. The contract references specific supplier part numbers including AF9253-4-03 and CR6253-4-03, and the unit of issue is each, priced at $167 per unit for a total contract value of $27,889. All government requirements and technical specifications referenced through R or I numbers take absolute precedence over general standards.
ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
PIN, STRAIGHT, HEADEDThe contract pertains to the procurement of 28 straight headed pins with NSN 5315-01-483-4502 under solicitation SPE4A6-26-T-08DW, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 171 days after award, with the solicitation closing on July 29, 2026, and posted on July 21, 2026. The item falls under NAICS code 332510 and is subject to a range of stringent technical, quality, and compliance requirements incorporated from the DLA Master List of Technical and Quality Requirements, including specific provisions for packaging, inspection at origin, removal of government identification from non-accepted supplies, and physical marking of bare items. Cybersecurity compliance is mandatory with CMMC Level 2 certification for third-party assessors, and the contract also enforces DFARS 252.225-7048 due to the presence of export-controlled technical data governed by ITAR or EAR, restricting dissemination to only approved contractors with JCP certification, completed DOD training, and authorized access. All contractors must comply with covered defense information protocols and tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. The place of performance is specified as New Cumberland, Pennsylvania, with Shaundrea Granderson serving as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
COUPLING, CLAMP, GROOVEDThis contract specifies the procurement of a grooved coupling and clamp, identified by NSN 5340-01-714-1224 and part number NV1021906T001, for a quantity of three units under solicitation SPE4A5-26-T-298B. The item is classified as a critical application item supplied by Hamilton Sundstrand Corporation and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including packaging, marking, and inspection standards set by MIL-STD-2073-1E and MIL-STD-129. All packaging and preservation methods must adhere to DLA’s RP001 guidelines, prohibiting the use of mercury or mercury-containing compounds in preservation, packaging, or marking, with specific exceptions for functional uses in batteries, instruments, sensors, and weapon systems as defined by NAVSEA. Mercury-containing portable lamps and instruments must include a secondary containment boundary and be shock-proof in compliance with NAVSEA 5100-003D. Delivery is required FOB origin within 171 days of contract award, with zero tolerance for quantity variance, and inspection and acceptance occur at the destination facility in New Cumberland, Pennsylvania. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The contract mandates strict adherence to DLA packaging and marking procedures, with no special marking required and palletization conforming to DLA standards. The delivery deadline is January 17, 2027, with the original required delivery date set for January 17, 2028. All shipments must be addressed to the DLA Distribution facility at DDSP New Cumberland and transportation logistics must follow DLAD Proc Notes C19 and C20. The contract was posted on July 21, 2026, with responses due by July 29, 2026, under NAICS code 332510 for industrial machinery manufacturing.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
LEVER, LOCK-RELEASEThe contract pertains to the procurement of a Lever, Lock-Release with NSN 5340-01-453-2554 and part number A6210372, under solicitation SPE7LX-26-U-8896, issued by the Department of Defense’s Strategic Acquisition Program Directorate. A total quantity of 135 units is requested at a unit price of $135.00, for a total contract value of $18,225. Delivery is required within 65 days FOB origin, with no variance allowed in quantity. The item is covered under DLA Direct, CONUS terms, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s packaging requirements and MIL-STD-129 for marking and labeling, with non-hazardous material packaged per ASTM D3951 unless a higher-priority DLA Master List technical or quality requirement applies. Hazardous materials must follow TQ requirement IP025 per Fed-Std-313. The packaging must also adhere to the DLA Packaging Requirements for Procurement (RP001) and palletization standards. Identification of the item must conform to MIL-STD-130N for military property marking, and the contractor must ensure all government identification is removed from non-accepted supplies. The solicitation is open via DIBBS, and the contract is subject to the revision of the DLA Master List of Technical and Quality Requirements in effect on the solicitation issue date. The primary point of contact is Theodore Misiolek, with response due by August 5, 2026.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
SPACER, RINGThe contract is for the procurement of two SPACER, RING units with NSN 5365-01-393-9408 under solicitation SPE4A7-26-T-587Y, with a delivery deadline of 171 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on the acquisition size. The item is subject to export control under either ITAR or EAR, restricting disclosure of associated technical data to foreign persons without prior authorization from the Department of State or Department of Commerce, including foreign nationals within the United States. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization may access the controlled data. Quality requirements include inspection and acceptance at origin, removal of government identification from non-accepted items, physical identification and bare item marking, and adherence to tailored higher-level quality standards applicable to both manufacturers and non-manufacturers. Packaging must conform to DLA standards, and the item falls under the Cybersecurity Maturity Model Certification (CMMC) Level 2 requirements for third-party assessors. Covered defense information applies, and the place of performance is documented as Bremerton, Washington, with Tamera Greene as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
SPACER, SLEEVEThis contract pertains to the procurement of a spacer sleeve with part number 60-550-0247-1, supplied by Flowserve Corp under a Department of Defense solicitation numbered SPE4A7-26-T-586H. The item is classified as a critical application item and must comply with stringent DLA packaging and quality requirements, including adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking codes applied. Mercury and mercury-containing compounds are strictly prohibited in the material or its contact surfaces, except for specified functional uses such as batteries, fluorescent lamps, instrumentation, weapons systems, and chemical reagents as defined by NAVSEA; portable devices containing mercury must include shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, with attributes classified as critical, major, or minor assigned corresponding verification levels or AQLs. The contract specifies a quantity of 15 units with no variance allowed, to be delivered FOB origin within 171 days to the DLA Distribution facility in New Cumberland, Pennsylvania. Delivery must align with the original required date of November 4, 2027, and the need ship date of January 17, 2027. The NSN for the item is 5365-01-280-6923, and it is procured under a simplified acquisition process governed by the DLA Master List of Technical and Quality Requirements in effect on the solicitation issue date. All shipments must comply with DLA’s transportation procedures outlined in DLAD Proc Notes C19 and C20.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
SPACER, SLEEVEThe contract pertains to the procurement of 176 units of a spacer sleeve identified by NSN 5365-00-174-8620 and part number NAS43HT8-92, governed by technical and quality requirements from the DLA Master List of Technical and Quality Requirements, specifically referencing NAS43 Revision 12 dated 11/30/2012. The item is classified as a critical application item, and all quality verification must adhere to zero non-conformances in sampling unless otherwise stipulated, with inspection methods following MIL-STD-1916 or ASQ H1331 Table 1, and attributes assigned specific verification levels or AQLs. Packaging and marking must comply strictly with MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization aligned with DLA packaging standards. The item must be delivered FOB origin within 171 days from contract award, with no tolerance for quantity variance, and is subject to inspection and acceptance at the destination. Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation compliance must follow DLAD Proc Notes C19 and C20. The original required delivery date was October 20, 2026, with a need-by date of January 17, 2027, under solicitation SPE4A7-26-T-585N, issued by the Department of Defense under NAICS code 332510.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
PIN, QUICK RELEASEThe contract pertains to the procurement of a PIN, QUICK RELEASE with NSN 5315-01-015-6854, for a quantity of 29 units at a unit price of $29.00, totaling $841.00, under solicitation SPE4A7-26-T-587P. Delivery is required within 20 days FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the point of origin. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping, and packing level B, with marking conforming to MIL-STD-129 and no special marking codes. Palletization follows DLA packaging requirements, and shipment is directed to a military facility in Nantou County, Taiwan. The item is subject to DLA’s Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances unless otherwise specified. Cybersecurity compliance mandates a CMMC Level 2 self-assessment, and covered defense information provisions apply. The unit of issue is EA, adhering to authorized DoD standards, and the point of contact for inquiries is Brad Ingram of the Department of Defense. The required delivery date is July 24, 2026, with solicitation responses due by July 29, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

NAICS: 326122
New
DIBBS
CLAMP, LOOPThis contract, identified by solicitation number SPE7LX-26-U-8911, is a Total Small Business Set-Aside for the procurement of CLAMP, LOOP with NSN 5340-01-611-4025 and part numbers 90531K and VT10592AA01-3HN from CUMMINS FILTRATION INC. and NORMA PENNSYLVANIA INC. DIV BREEZE respectively. The requirement, for 240 units at a unit price of $1 each, is designated as a DLA DIRECT, CONUS delivery with FOB ORIGIN terms and no quantity variance allowed. Delivery must be completed within 116 days, with inspection and acceptance occurring at the destination. Packaging must strictly comply with the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. If the item is classified as hazardous under FED-STD-313, packaging must follow TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is permitted, but all packaging and labeling must conform to MIL-STD-129. Palletization must adhere to RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT. The contract is part of a broader framework incorporating technical and quality specifications referenced through R and I numbers found on the DLA website. The solicitation, issued by the Department of Defense’s Strategic Acquisition Program Directorate, is closed to small businesses only and was posted on July 21, 2026, with responses due by August 5, 2026. The unit of issue is each (EA), and quantities are fixed with no allowance for adjustment. The point of contact for inquiries is Theodore Misiolek, with details provided for email and phone. The contract references a comprehensive set of DLA packaging and quality standards that must be met without exception, and all packaging must be marked and labeled in compliance with MIL-STD-129. While the quantity listed is an estimate, the buyer is not obligated to purchase the full amount, but any awarded contract must strictly follow the defined technical, packaging, and delivery protocols outlined. The NSN and part number are critical identifiers for compliance and logistics tracking, and suppliers must ensure all documentation aligns with the DLA’s eProcurement and unit of issue guidelines.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAINThis contract pertains to the procurement of six plain seals identified by NSN 5330-01-503-4930 under solicitation SPE7LX-26-U-8895, with a delivery requirement of 301 days after award. The item is subject to extensive technical, quality, and export control requirements as defined by the DLA Master List of Technical and Quality Requirements, which incorporate MIL-STD-1916 or ASQ H1331 for sampling unless otherwise specified, with zero non-conformances required in the sample lot unless explicitly stated otherwise. Critical, major, and minor attributes must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively, and unspecified attributes are treated as major. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, using a medium-duty, waterproof, greaseproof, opaque bag to prevent ultraviolet degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with supplied hardware, except for functional uses in batteries, fluorescent lights, specified instruments, weapon systems, or chemical reagents authorized by NAVSEA; where permitted, portable devices must include a second barrier of containment per NAVSEA 5100-003D. Configuration changes require formal engineering change proposals, deviation requests, and source approval documentation, while inspection and acceptance may occur at origin, and all government identification must be removed from non-accepted items. Technical data associated with this contract is subject to export controls under ITAR or EAR, and access is restricted to DLA contractors certified under the US/Canada Joint Certification Program, who have completed required DOD training and been approved by DLA. All contractual obligations are governed by tailored higher-level quality requirements and specific documentation standards for verification and compliance.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332999
New
DIBBS
TREAD, METALLIC, NONSKIDThe contract is for the procurement of two units of metallic nonskid tread with the NSN 2540-01-593-9652 under solicitation SPE7LX-26-U-8910, designated as a Total Small Business Set-Aside. Delivery is required within 109 days after award, and responses must be submitted by August 5, 2026. The item is governed by DLA packaging and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with specific provisions including tailored higher-level quality standards, configuration change management, inspection and acceptance at origin, and strict controls on government identification removal from non-accepted supplies. Only qualified manufacturers listed on approved QPLs or QMLs may supply components, and the contract enforces compliance with MIL-STD-1916 or comparable zero-based sampling plans, assigning verification levels and AQLs according to criticality of attributes. Ozone-depleting chemicals are strictly prohibited, and substitute chemicals require prior approval unless explicitly permitted by specification. Technical data is subject to export controls under ITAR or EAR, restricted to contractors with approved JCP certification, completed DLA training, and authorized access. The contract mandates CMMC Level 2 certification for third-party assessors and requires phosphate coating suppliers to meet specific certification standards. The approved source of supply has been updated from Devcon Corp to ITW Polymers Adhesives North America for part numbers PK9500-3/2 and PK9500-3/2-7. The contracting office is the Strategic Acquisition Program Directorate under the Department of Defense, with Theodore Misiolek as the primary point of contact.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details
NAICS: 314910
New
DIBBS
BAG, CARTRIDGE CLIPThe contract is for the procurement of a neoprene-coated cloth cartridge clip, a critical gun part designated as a Category I munitions item under demilitarization requirements, with strict compliance mandated for technical specifications referenced in the DLA Master List of Technical and Quality Requirements. The item, identified by NSN 1005-01-182-4536 and part number 65751-03013-041, must conform to exact engineering drawings and revision standards, and the actual manufacturer must be formally identified and approved prior to award, with any subsequent changes requiring official contract modification. The product is subject to Product Verification Testing (PVT) before each shipment, requiring five samples from each subcontractor involved in production, one of which may be destroyed during testing, and all samples must be properly marked and traced to their source. Inspection and acceptance occur at the manufacturer’s facility under the Quality Assurance Representative, following zero-defect sampling criteria aligned with MIL-STD-1916 or comparable zero-based plans, with critical attributes held to the highest verification levels and specified AQLs. Packaging must adhere to MIL-STD-2073-1E and DLA requirements, including marking per MIL-STD-129, and no ozone-depleting chemicals are permitted under any circumstances. The contract is a total small business set-aside under NAICS code 314910, with a delivery window of 134 days, FOB origin, no quantity variance allowed, and a unit price of $5.00 for a total of five units.
Textile Bag and Canvas Mills

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTINGThe contract is for the procurement of three mounting brackets with NSN/Part Number 5340-01-693-6794 under solicitation SPE7LX-26-U-8898, with a delivery requirement of 81 days after contract award. The acquisition is structured as a Total Small Business Set-Aside under NAICS code 332510, indicating exclusive eligibility for small businesses. Technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons or entities without prior authorization from the Department of State or Commerce, including foreign national employees of U.S. companies. Compliance with DFARS 252.225-7048 is mandatory, and only contractors with approved U.S./Canada Joint Certification Program status, who have completed mandatory DOD export control training and the DLA questionnaire, may access the controlled data. The solicitation was posted on July 21, 2026, with responses due by August 5, 2026, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek serving as the primary point of contact.
Hardware Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332994
New
DIBBS
HOUSING ASSY, FEEDERThe item specified is a Housing Assembly, Feeder, manufactured via metal casting, requiring specialized tooling for production, with sourcing and technical support available through DLA’s Aviation, Land & Maritime Supply Chains. The procurement is governed by a comprehensive set of technical, quality, and compliance requirements including CMMC Level 2 certification for third-party assessors, tailored higher-level quality standards for manufacturers and non-manufacturers, and strict configuration change management protocols requiring formal engineering change proposals or variance requests. Inspection and acceptance must occur at origin, and non-accepted items must have all government identification removed. Physical identification of the bare item is mandated, and technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting disclosure to foreign persons without prior Department of State or Commerce authorization, with DFARS 252.225-7048 fully applicable. Access to this controlled data is restricted to DLA contractors who hold JCP certification, have completed mandatory DOD export control training, and received formal approval from DLA. The solicitation, identified as SPE7LX-26-U-8906, is a total small business set-aside under NAICS code 332994, issued by the Department of Defense’s Strategic Acquisition Program Directorate. Four units are required with a delivery deadline 186 days after award. The solicitation closed on August 5, 2026, with a posted date of July 21, 2026. Demilitarization requirements apply as this item falls under Category I Munitions List items per DoDM 4160.28-Vol. 3, and it is subject to DLA packaging standards and covered defense information protocols. All technical and quality specifications referenced must be drawn from the DLA Master List in effect on the solicitation issue date. The primary point of contact for inquiries is Theodore Misiolek of DLA, reachable via email or phone provided.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335999
New
DIBBS
POWER SUPPLYThis contract specifies the procurement of a power supply with NSN 6130-01-502-8006, quantity of six units, under solicitation SPE7LX-26-U-8892, issued by the Department of Defense’s Strategic Acquisition Program Directorate. Delivery is required FOB origin within 104 days with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 while strictly adhering to all DLA Master List of Technical and Quality Requirements, particularly RP001 for packaging, MIL-STD-129 for marking and labeling, and PALLETIZATION standards. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are to be classified with specific verification levels or AQLs. The item is designated a critical application, and mercury or mercury-containing compounds are strictly prohibited except for specific exempted uses such as batteries, fluorescent lights, or instrumentation per NAVSEA guidance, with portable mercury-containing devices requiring shockproof design and secondary containment. All technical and quality requirements referenced by R or I numbers in the DLA Master List govern over general standards. The unit of issue is each, and the contract is issued under DLA Direct, CONUS coverage.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
CLEVIS, ROD ENDThe item specified is a CLEVIS, ROD END with NSN 5340-01-579-1843, for a quantity of 61 units, under purchase request 1000237681, with delivery required within 111 days after order. The procurement is conducted under solicitation SPE7LX-26-U-8901, issued on July 21, 2026, with responses due by August 5, 2026. This is a total small business set-aside under FAR 19.5, classified under NAICS code 332722, and managed by the Strategic Acquisition Program Directorate within the Department of Defense. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on acquisition size. The item includes export-controlled technical data subject to ITAR or EAR, restricting disclosure or export to authorized parties only. Access is limited to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and authorized clearance via the DLA. DFARS 252.225-7048 governs the handling of this data, including restrictions on foreign nationals, even when employed by U.S. entities. Government identification must be removed from non-accepted supplies, and the primary point of contact for inquiries is Theodore Misiolek, reachable via email and phone.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333613
New
DIBBS
BALL JOINTThe contract is for the procurement of a ball joint with NSN 3040-01-600-1867 and part number 2998K321 from McMaster-Carr Supply Co, under solicitation SPE7LX-26-U-8915, with a total quantity of 16 units at a unit price of $16.00, resulting in a total price of $256.00. The requirement is designated as a Total Small Business Set-Aside under NAICS code 333613, and delivery must be made within 49 days FOB origin with no tolerance for quantity variance. All items must be packaged and marked in strict compliance with MIL-STD-129 and ASTM D3951, but DLA’s Master List of Technical and Quality Requirements takes precedence over any material standard. Inspection and acceptance occur at the destination point, and packaging must follow DLA’s Packaging Requirements for Procurement (RP001), including palletization standards. The U/I is EA and the QUP is specified as 001, meaning each unit pack contains one item. The solicitation was posted on July 21, 2026, with responses due by August 5, 2026, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate. Primary point of contact is Theodore Misiolek, reachable via phone or email. All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable version determined by the solicitation issue date for simplified acquisitions. The item is covered under DLA Direct, CONUS, and the contract explicitly states that the estimated quantity may not be fully purchased by the IDC. All documentation and labeling must conform to the referenced standards and DLA directives without exception.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details
NAICS: 327999
New
DIBBS
KNOBThis contract, identified as KNOB under solicitation number SPE7LX-26-U-8891, is a total small business set-aside for the procurement of 68 units of a knob with NSN 5355-01-382-5286, requiring delivery within 88 days after award. The contract incorporates stringent technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date. Zero-tolerance policies are enforced for hazardous materials: ozone-depleting chemicals are completely prohibited, and mercury or mercury-containing compounds are banned unless specifically exempted for functional uses such as batteries, fluorescent lights, sensors, or chemical reagents approved by NAVSEA, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. All items must be asbestos-free, and any substitutions require formal approval under clause L30 and provision 4 conditions. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The contract explicitly prohibits the use of government identification on non-accepted supplies and mandates full and open competition under a small business set-aside, with Theodore Misiolek designated as the primary point of contact for inquiries.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333613
New
DIBBS
BRAKE, BASEThis contract is for the procurement of 21 units of BRAKE, BASE with NSN 3040-01-165-4444 under solicitation SPE7LX-26-U-8900, a total small business set-aside classified under NAICS code 333613. The delivery is due within 99 days after contract award, with responses due by August 5, 2026. The specification incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with applicable revisions controlled by the solicitation issue date for simplified acquisitions. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. The product must not contain any Class I ozone-depleting chemicals, and any substitutions require prior approval unless explicitly authorized by the specification. Inspection and acceptance are to occur at origin, and configuration changes must be managed through an Engineering Change Proposal with formal request for variance if deviations are necessary. Technical data associated with this item is subject to export controls under ITAR or EAR, with restrictions on disclosure to foreign persons both domestically and abroad, requiring compliance with DFARS 252.225-7048. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, who have completed required DLA training and questionnaires. The contracting office is the Strategic Acquisition Program Directorate within the Department of Defense, with Theodore Misiolek as the primary point of contact.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details