Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Commissioning and Performance Testing

Active

Federal

Response Deadline07/27/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires full commissioning of systems according to manufacturer-recommended procedures, including operational testing and demonstration of complete system functionality to ensure all components operate as intended. The work must be performed at Wright Patterson AFB with a zip code of 45433, and all tasks must adhere to established technical standards to verify performance and reliability. This is a subcontract under a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA are eligible to bid, and the NAICS code 541330 indicates the work falls under engineering services. The solicitation was posted on July 22, 2026, with a response deadline of July 27, 2026, at 4:00 PM, and is managed by the Department of Defense through the USAF AFMC AFRl PZL AFRl PZLE office.

General Info

Commission systems at Wright-Patterson AFB 45433 per manufacturer standards, small business set-aside, engineering services, bid due July 27, 2026.

Agency

Department Of Defense → FA2396 USAF Afmc Afrl Pzl Afrl PzleView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Wright Patterson AFB, OH, 45433, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 22

subcontract

Response DeadlineJul 27

Submission deadline

Response Deadline

07/27/2026, 04:00:00 PM UTCin about 15 hours

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA2396 USAF Afmc Afrl Pzl Afrl Pzle

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA2396 USAF Afmc Afrl Pzl Afrl Pzle

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform commissioning per manufacturer-recommended procedures, conduct operational testing, and demonstrate full system functionality.

Similar Contracts

Same NAICS industry code

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services through an Indefinite Delivery/Indefinite Quantity (IDIQ) contract to support a range of major construction projects across its facilities. These services will span the full lifecycle of projects including planning, design, construction, and closeout phases, with a focus on Design Build, Progressive Design Build, and alternative delivery methods. The contractor will be responsible for ensuring that all projects adhere to approved schedules, budgets, and quality standards while coordinating with Port staff and stakeholders to deliver complex infrastructure initiatives efficiently and effectively. The contract will serve as the primary mechanism for securing CM expertise across multiple future projects without specifying individual task orders at this time. The solicitation is classified under NAICS code 541330 for Architectural, Engineering, and Related Services and is managed by the Port’s Construction Management division. Primary point of contact for inquiries is Hala Rabbo, with additional support available from Project Manager Ann Davidson. The contract is forecasted for release in July 2026, though no formal solicitation number or set-aside details have been published. Performance will occur at various Port of Seattle locations, and interested firms are encouraged to monitor the official Port portal for official posting and submission guidelines. All contractors must demonstrate proven experience in managing large-scale public construction projects under similar delivery models.

Construction Management

POSTED

about 8 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test/adjust/balance, controls, and regulatory support services across Seattle-Tacoma International Airport’s facilities and infrastructure systems, operating within a continuous 24/7/365 environment. The focus is on identifying and correcting performance deficiencies in mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems to enhance efficiency, reliability, comfort, and longevity while ensuring compliance with safety and regulatory standards. All work will be executed under Service Directives and executed in close coordination with Aviation Facilities and Infrastructure to meet agreed-upon deliverables. The contract is structured as an IDIQ vehicle under NAICS code 541330 and is managed by the Port of Seattle’s Aviation Facilities and Infrastructure division. Point of contact for inquiries and coordination includes Jason Gates as the primary liaison and Jim Farris as the project manager, with all communication and administrative details centered through the Port of Seattle’s official procurement portal. The solicitation was posted in July 2026 and is intended to establish a framework for ongoing support services critical to maintaining the airport’s complex operational systems.

Aviation Facilities & Infrastructure

POSTED

about 8 hours ago

DEADLINE

Mechanical, Electrical, and Plumbing (MEP) EngineeringThe contract seeks qualified firms to design mechanical, electrical, plumbing, and fire protection systems for public buildings under a subcontract arrangement, classified under NAICS code 541330 for architectural and engineering services. The solicitation was posted on July 25, 2026, with a response deadline set for September 7, 2026, and is being managed by the State of Utah, though no specific city or office address is provided. Scope of work includes comprehensive MEP system design for public infrastructure projects, requiring technical expertise in integrated building systems to meet safety, efficiency, and code compliance standards. While no set-aside provisions or point of contact details are listed, interested parties must submit proposals through the designated online portal by the stated deadline.

POSTED

DEADLINE

in about 1 month

Structural Engineering ServicesThe contract titled Structural Engineering Services seeks qualified providers to perform structural analysis and design for buildings and structures, with specific emphasis on foundation systems and seismic evaluations to ensure compliance with safety and resilience standards. Work is expected to involve detailed engineering assessments, modeling, and documentation to support the integrity and durability of constructed facilities under dynamic and environmental loads. The opportunity is categorized as a subcontract and was posted on July 25, 2026, with responses due by September 7, 2026, and is governed under NAICS Code 541330 for architectural and engineering services. All performance obligations are tied to the state of Utah, though no specific city or address is provided, and the contracting entity is identified as the Utah state agency without further organizational subdivision or point of contact details listed.

POSTED

DEADLINE

in about 1 month

BD26-XX Pre-Qualified Design Professional Services Pre-Qualified Vendor ListThe State of Utah Division of Purchasing is seeking statements of qualifications from design professionals to establish a pre-qualified vendor list for architectural and engineering services, under the solicitation number BD26-XX. This open-ended list will remain active for twelve months from the date of approval, after which vendors must resubmit their qualifications for renewal. The State reserves the right to reopen the solicitation at any time, though not more frequently than once every twelve months, to accommodate additional qualified vendors or adjust criteria as needed. The posting date is July 25, 2026, with responses due by September 7, 2026, and all selections will be managed through the state’s procurement platform. Interested firms must submit their credentials to be considered for inclusion, which does not guarantee work but enables eligibility for future project assignments. The point of contact for this solicitation is Brayden Dent, reachable via email at braydend@utah.gov, and all submissions must be made through the official online portal at the provided UI link. The procurement is not subject to any specific set-aside classifications and applies across the State of Utah with no designated city or zip code for performance, meaning services may be required anywhere within the state. Vendors are expected to demonstrate relevant experience, expertise, and capability in design services appropriate for public sector projects. Approval does not constitute a contract or commitment to award work but allows the State to directly engage pre-qualified firms as needs arise, streamlining the selection process for time-sensitive or recurring design projects.

POSTED

DEADLINE

in about 1 month

Quality Assurance and Sampling Inspection ServicesThis contract requires the performance of quality assurance and sampling inspection services under MIL-STD-1916 or ASQ H1331 Table 1, with a strict zero tolerance policy for any non-conformances on critical, major, and minor attributes. The work involves rigorous inspection protocols to ensure every product meets exacting standards without exception, targeting high-stakes components where even minor deviations are unacceptable. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond, reinforcing the intent to support small business participation in defense-related quality initiatives. The NAICS code 541330 indicates the primary focus is on scientific and technical consulting services, specifically quality control and inspection activities, and the contracting activity is under the ASC Commodities Division of the Department of Defense. The opportunity was posted on July 25, 2026, with a response deadline of August 8, 2026, providing a two-week window for qualified small businesses to submit proposals. While no specific place of performance or point of contact is detailed in the provided data, the work is tied to a Defense Logistics Agency procurement platform, suggesting inspections will support the broader DOD supply chain. The absence of an office address or zip code implies that the location of performance may be flexible or determined by the nature of the subcontracted materials being inspected, potentially across multiple facilities or contractor sites under the DOD’s control. The requirement underscores the critical importance of precision and compliance in defense-related quality assurance, where failure to meet zero tolerance standards could compromise operational readiness and safety.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply Chain Traceability & Quality Documentation ServicesThe contract requires comprehensive documentation and recordkeeping services to ensure end-to-end supply chain traceability in alignment with DLA quality standards, focusing on full visibility and accountability across all procurement and logistics activities. All work must adhere to the specified compliance framework to support audit readiness and operational integrity, with deliverables designed to validate the provenance and integrity of materials throughout the supply chain. This subcontract falls under NAICS code 541330 and is managed by the ASC Commodities Division within the Department of Defense, with responses due by July 31, 2026. The place of performance and point of contact details are not specified, but performance is expected to support DLA’s broader mission of maintaining rigorous quality control across defense supply networks.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Inspection, Testing, and Quality Assurance ServicesThe contract requires the performance of technical inspection and testing on newly manufactured compressor ducts at both their origin and destination locations to verify full compliance with established engineering and qualification standards. This work is critical to ensuring that each duct meets stringent performance, safety, and reliability criteria before being accepted for use in defense-related systems. The scope is focused on quality assurance through rigorous testing protocols and documentation, with an emphasis on traceability and adherence to technical specifications throughout the supply chain. This is a subcontract under the NAICS code 541330 for engineering services, issued by the Department of Defense through the Ok DLA Aviation office in Oklahoma City. The solicitation was posted on July 25, 2026, with a response deadline of August 25, 2026. While specific location details for performance are not provided, the work must be conducted at manufacturing sites and final delivery points to cover the full lifecycle of the components. There is no set-aside designation, indicating this opportunity is open to all eligible contractors, and the successful bidder will be responsible for delivering comprehensive inspection reports and test data to confirm regulatory compliance.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

On-Site Security System Testing & Compliance VerificationThe contract titled On-Site Security System Testing & Compliance Verification requires the performance of scheduled functional testing on security alarm components to ensure operational integrity and adherence to federal standards. Tasks include verifying system functionality, documenting test results, and providing support necessary for annual certification. All work must be conducted on-site at the specified location in Salem, with a zip code of 01970, and must meet rigorous compliance benchmarks tied to federal requirements for security systems. The contractor is expected to deliver thorough and accurate records to facilitate regulatory certification. This is a subcontract under NAICS code 541330, posted by the Department of the Interior through its office Ner Services Mabo (43000). The solicitation opened on July 25, 2026, with a deadline for responses set for August 7, 2026, at 2:00 PM. No set-aside classification is designated, and the contract is not associated with a specific point of contact or additional office address beyond the place of performance. All work must be completed in accordance with the stated federal compliance framework and submitted for certification purposes within the contractual obligations.

Ner Services Mabo (43000)

POSTED

DEADLINE

Generator Condition Assessment & ReportingThe contract requires comprehensive assessments of generator systems to ensure operational readiness and compliance, encompassing load bank testing to verify performance under simulated full-demand conditions, emissions evaluations to meet environmental standards, and detailed fuel quality analyses to detect contamination or degradation that could compromise system reliability. All findings and test results must be compiled into formal technical reports and submitted electronically via email, with copies retained for audit purposes to support accountability and regulatory compliance. The work is scoped as a subcontract under NAICS code 541330, which pertains to engineering services, and is issued by the Texas Department of Public Safety with a response deadline of August 14, 2026. The assessment activities are critical for maintaining emergency power infrastructure and must be performed to a high standard of technical accuracy and documentation rigor.

Department of Public Safety

POSTED

DEADLINE

Diagnostic and Troubleshooting Services for Water Treatment EquipmentThe contract awards services to perform up to three diagnostic evaluations aimed at identifying malfunctions within a water treatment system. Each evaluation includes comprehensive testing, root cause analysis, and detailed reporting to ensure accurate identification and documentation of system failures. The work is focused on ensuring operational integrity and compliance with water treatment standards, with all activities to be conducted at a designated location in Fresno. This is a subcontract under the NAICS code 541330, categorized as a professional, scientific, and technical service. The solicitation was posted on July 25, 2026, with responses due by August 11, 2026, at 10:00 PM Pacific Time. The contracting agency is the California Department of Fish & Wildlife, operating under the state of California, and the work is intended to support water infrastructure reliability within the state’s environmental management framework.

California Department of Fish & Wildlife

POSTED

DEADLINE

MEP Engineering ServicesTexas Southern University is seeking qualified subcontractors to provide MEP engineering services for the design and integration of HVAC, electrical, plumbing, and fire alarm systems within renovated study rooms. The project requires seamless coordination across all disciplines to ensure functional, code-compliant, and efficient building systems that support the academic environment. The contract is open for responses until August 18, 2026, with work to be performed on campus at the university’s location. The solicitation falls under NAICS code 541330, classifying it as architectural and engineering services, and is structured as a subcontract opportunity through the Texas SmartBuy procurement portal. Bidders must demonstrate expertise in multi-system integration and experience with institutional facility upgrades, though no specific set-aside provisions apply. All proposals must align with the university’s operational standards and technical requirements for renovated study spaces.

Texas Southern University

POSTED

DEADLINE

More opportunities from Department Of Defense → FA2396 USAF Afmc Afrl Pzl Afrl Pzle

Same awarding agency

Unable to Decompose Subcontract OpportunitiesThe contract titled "Unable to Decompose Subcontract Opportunities" was posted on July 23, 2026, with a response deadline of July 31, 2026, and is categorized as a subcontract opportunity under the Department of Defense, specifically tied to the FA2396 USAF Afmc Afrl Pzl Afrl Pzle organization. The place of performance is listed as Goulds, Florida, with a zip code of 32542, though no detailed office address or point of contact is provided. The NAICS code is listed as 000000, indicating an unresolved or unclassified code, and no set-aside type or description is applicable. Due to a configuration error that prevented access to the prime contract details, no subcontract or supplier opportunities can be identified or structured at this time, rendering the opportunity currently unactionable. The official UI link is available for reference, but no further data can be extracted or utilized without resolving the system error.

POSTED

DEADLINE

AFRL/RWTE Explosive-Resistant Friction Ovens (Building 1206)The U.S. Air Force Research Laboratory at Wright-Patterson Air Force Base is soliciting two explosive-resistant friction ovens under solicitation COMBO-AFRL-RMZB-2026-0016, issued as a commercial item RFQ under the Revolutionary FAR Overhaul Part 12 framework. The requirement is set aside 100% for small businesses, with the NAICS code 333994 for industrial process furnace and oven manufacturing, and the ovens must meet all specifications outlined in the Minimum Requirements Document dated 27 May 2026. Delivery is FOB destination to Building 1206 at Eglin AFB, Florida, with an urgent request for prompt delivery. The government will evaluate offers using the Lowest Price Technically Acceptable method, prioritizing the lowest-priced quote that meets all technical requirements, and will stop evaluating further proposals once a conforming and acceptable offer is found. Offerors must assume the government has no knowledge of their capabilities and must provide full documentation within their submission. The solicitation incorporates a comprehensive set of required provisions and clauses covering compliance with Buy American, Trade Agreements, labor standards, cybersecurity, small business subcontracting, tax certification, ethical conduct, and prohibitions related to foreign entities, human trafficking, child labor, and restricted regions like Xinjiang and Sudan. Offerors must also include warranty documentation and specify the validity period of their quote. Submissions must be emailed by 31 July 2026 at 5:00 PM ET to Jason Sav, Contract Specialist, and no DPAS priorities apply. The government reserves the right to award all, some, or none of the items, and may resolicit if only one qualifying offer is received. All terms and conditions follow RFO 52.212-4, and the acquisition is subject to a full suite of DFARS supplements governing contractor responsibilities, data rights, payment methods, and security requirements.

Industrial Process Furnace and Oven Manufacturing

POSTED

DEADLINE

Operator Training DeliveryThe contract titled Operator Training Delivery requires the provision of up to four hours of on-site training for up to three government personnel focused on the operation and routine maintenance of a newly installed compressed air system. Training must be conducted at Wright Patterson AFB with a zip code of 45433 and is intended to ensure personnel are fully capable of safely and effectively using and maintaining the equipment. The opportunity is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond, and the NAICS code 611512 classifies the work under other schools and instruction services. The solicitation was posted on July 22, 2026, with a response deadline of July 27, 2026, at 4:00 PM, and is managed by the Department of Defense under the FA2396 USAF Afmc Afrl Pzl Afrl Pzle agency. All proposed services must comply with federal contracting requirements and be delivered within the specified timeframe and location.

Flight Training

POSTED

DEADLINE

in about 15 hours

Electrical Installation and Controls IntegrationThe contract requires the installation of electrical connections compliant with the National Electrical Code and the integration of a control system featuring automated lead/lag operation and Modbus protocol for remote monitoring. This work is critical to ensuring reliable and efficient system performance through standardized electrical practices and advanced automation capabilities. The project demands technical precision in both wiring and control system configuration to support real-time data exchange and operational oversight. This is a subcontract under a Total Small Business Set-Aside, classified under NAICS code 238210 for electrical contracting. The opportunity was posted on July 22, 2026, with a response deadline of July 27, 2026. Performance will occur at Wright Patterson Air Force Base, Ohio, 45433, under the purview of the Department of Defense, specifically the FA2396 USAF AFMC AFRL PZL AFRL PZLE office. The contract is strictly limited to small business concerns as defined by SBA regulations, and interested parties must submit proposals before the specified deadline to be considered.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

in about 15 hours

Mechanical Installation and PipingThe contract entails the removal of existing compressors and dryers and the installation of new units complete with all associated piping, ensuring each system is equipped with independent isolation capabilities to maintain uninterrupted plant air service throughout the work. The project requires careful coordination to avoid disruptions to critical operations while adhering to technical specifications for piping connections and system integration. All work must be performed at Wright Patterson AFB, Ohio, with the full scope focused on mechanical installation and piping tasks related to compressed air infrastructure. This is a total small business set-aside subcontract under the NAICS code 238220, meaning only certified small businesses are eligible to respond. The solicitation was posted on July 22, 2026, with a response deadline of July 27, 2026, and is managed by the Department of Defense through the FA2396 USAF AFMC AFRl PZL AFRl PZLE office. The location of performance is strictly designated to the Wright Patterson AFB facility, and all contractors must be prepared to comply with federal procurement requirements while delivering seamless, continuous air service during and after installation.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

in about 15 hours

Supply of Air-Cooled Desiccant Air DryersThe contract calls for the supply of two air-cooled desiccant air dryers, each with a minimum capacity of 490 cubic feet per minute, to support critical compressed air system operations at Wright-Patterson Air Force Base. The equipment must meet stringent performance requirements to ensure reliable and consistent air quality for military and aerospace applications. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses certified under the Small Business Administration guidelines, and is classified under NAICS code 33399A for other commercial and industrial machinery and equipment manufacturing. The opportunity was posted on July 22, 2026, with responses due by 4:00 PM Eastern Time on July 27, 2026, and the place of performance is firmly designated at the 45433 zip code in Wright Patterson AFB. All work must be executed in alignment with Department of Defense standards and delivery timelines to support ongoing operational readiness.

POSTED

DEADLINE

in about 15 hours

Supply of Oil-Free Rotary Screw Air CompressorsThe contract calls for the supply of two new oil-free, air-cooled rotary screw air compressors, each with a minimum capacity of 400 CFM at 125 psig, ensuring reliable, contaminant-free compressed air for critical operations. The requirement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond, and the NAICS code 333912 applies to industrial machinery manufacturing. The performance location is specified as Wright Patterson AFB with a zip code of 45433, indicating the equipment must be delivered and installed at this Department of Defense facility. The solicitation was posted on July 22, 2026, with proposals due by 4:00 PM ET on July 27, 2026, leaving a narrow five-day window for submissions, and the contracting activity is under the FA2396 USAF AFMC AFRl PZL AFRl PZLE organization.

Air and Gas Compressor Manufacturing

POSTED

DEADLINE

in about 15 hours

Replace Bldg 65 Air Compressors (UPDATE)The contract solicitation COMBO-AFRL-RIZ-2026-0012, titled Replace Bldg 65 Air Compressors, is a total small business set-aside under FAR 19.5, targeting NAICS code 333912 for air and gas compressor manufacturing. It is managed by the Department of Defense through the USAF AFMC AFRIL PZL AFRIL PZLE office located at Wright Patterson Air Force Base, Ohio, with performance required at Building 65, Area B, 2790 D Street, WPAFB. A mandatory final site visit is scheduled for July 23, 2026, from 2:00 to 3:00 PM EST, and attendance is required in person with no virtual option available; all participants must RSVP by July 22, 2026, to michael.hornberger.1@us.af.mil and request base access passes by the same deadline if needed. Responses to the solicitation are due by July 27, 2026, at 4:00 PM EST, and the primary point of contact for inquiries is Mike Hornberger, reachable via email or phone at 385-634-3854.

Air and Gas Compressor Manufacturing

POSTED

DEADLINE

in about 15 hours

Logistics and Return Shipment of Refurbished HMD

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Precision Calibration and Functional Testing of Refurbished HMD

Testing Laboratories and Services

POSTED

DEADLINE

OLED Micro-Display Integration for Helmet-Mounted Display (HMD)

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

CMMC & NIST SP 800-171 Compliance Support

Computer Systems Design Services

POSTED

DEADLINE