Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Compliance Testing and Certification Services for Joint Sealers

Active

State & Local

Response Deadline08/07/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for independent laboratory testing and certification of joint sealers to ensure they meet the technical requirements established by the Texas Department of Transportation and the Flexible Drainage Management Program. The work involves rigorous evaluation of material performance, durability, and adherence to specified standards, with results used to validate compliance for use in transportation infrastructure projects. All testing must be conducted by accredited facilities using validated methods, and certification must be provided to substantiate that the sealers satisfy all applicable TxDOT specifications and FDMP criteria. This is a subcontract opportunity with a solicitation response deadline of August 7, 2026, and is classified under NAICS code 541380 for other scientific and technical consulting services. The project is managed by the Texas Department of Transportation and will be performed across the state, with no specific city or zip code designated for performance. Interested parties must submit their proposals by the deadline, and while no set-aside information is provided, the contract is open to qualified independent laboratories capable of delivering reliable and repeatable testing results for joint sealers used in roadway applications.

General Info

Independent labs to test and certify joint sealers per TxDOT and FDMP standards by August 7, 2026.

Agency

Texas Department Of TransportationView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

TX, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 31

subcontract

Response DeadlineAug 7

Submission deadline

Response Deadline

08/07/2026, 10:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyTexas Department Of Transportation

ContactsNo contacts available

OfficeN/A

Organization / Agency

Texas Department Of Transportation

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Independent laboratory testing and certification of joint sealers to verify compliance with TxDOT specifications and FDMP requirements.

Similar Contracts

Same NAICS industry code

Instrument Calibration & Performance Verification ServicesThe contract entails routine and audit-based calibration services for HACH analytical instruments to maintain regulatory compliance, with a focus on performance verification, accurate data logging, and formal certification reporting. These services are critical to ensuring the reliability and accuracy of environmental monitoring data collected by the Trinity River Authority of Texas, supporting ongoing compliance with state and federal water quality standards. The work requires certified technicians to perform scheduled calibrations as well as reactive audits triggered by compliance events or quality control anomalies, with all activities meticulously documented and reported to meet audit readiness requirements. The solicitation is classified as a subcontract under NAICS code 541380 for other scientific and technical consulting services, posted on July 31, 2026, with a response deadline of August 14, 2026. The place of performance and specific location details are not provided, indicating service may be required across multiple sites within Texas where HACH instruments are deployed. The contracting entity is the Trinity River Authority of Texas, and while no point of contact is listed, interested parties must submit proposals through the provided online portal before the stated deadline to be considered for award.

Trinity River Authority of Texas

POSTED

about 21 hours ago

DEADLINE

Quality Assurance and Inspection at Origin ServicesThe contract requires the provision of quality assurance services that include inspection at origin, management of configuration changes, and the preparation of Certificates of Conformance consistent with RQ001 and source control drawings. These tasks are critical to ensuring product integrity and compliance with specified technical standards prior to delivery. The work must be performed in alignment with stringent Defense Department requirements, emphasizing rigorous documentation and adherence to approved configurations throughout the supply chain. This is a subcontract under the NAICS code 541380, issued by the Department of Defense through LAND SUPPLIER OPERATIONS SMSG, with a response deadline of August 11, 2026. The solicitation was posted on July 31, 2026, and the performance location is not specified beyond the requirement to conduct inspections at origin. There is no set-aside designation, and the point of contact information is not provided, though all submissions must be made through the DIBBS platform using the referenced solicitation number SPE7MX26RX025.

LAND SUPPLIER OPERATIONS SMSG

POSTED

about 23 hours ago

DEADLINE

Product Verification Testing (PVT) SupportThe contract supports government-conducted Product Verification Testing by providing comprehensive assistance in sample preparation, documentation, and coordination with Defense Logistics Agency testing laboratories, as specified in Section E05. This subcontract is focused on ensuring that all testing procedures align with federal standards and that logistical and administrative tasks are executed accurately to facilitate timely and reliable verification outcomes. The work involves close collaboration with DLA labs to meet technical requirements and maintain traceability throughout the testing lifecycle. The solicitation is posted under NAICS code 541380 and is managed by the Land Supply Chain within the Department of Defense. The opportunity is open for responses until August 31, 2026, with no specific set-aside categories or organization type restrictions indicated. Performance locations are not explicitly defined, but the work centers around DLA testing facilities and requires active coordination with government personnel. Interested parties can access further details through the official DIBBS portal linked in the contract data.

LAND SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Product Verification Testing CoordinationThe contract requires the preparation, marking, and shipment of Product Verification Test (PVT) samples in full compliance with Department of Defense standards, including proper segregation of materials and complete documentation to ensure traceability and regulatory adherence. All activities must be conducted under strict guidelines to meet the DoD’s quality and procedural requirements for verification testing. The effort is classified as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the Small Business Administration, and falls under the NAICS code 541380 for other scientific and technical consulting services. The solicitation was posted on July 31, 2026, with a response deadline of August 20, 2026, and is managed by the ASC Commodities Division within the Department of Defense. Performance will occur at an unspecified location, and the award is expected to follow competitive procedures under the Federal Acquisition Regulation.

ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

Quality Assurance and Compliance TestingThis contract requires third-party testing and certification of high-density polyethylene gas pipes to verify compliance with ASTM standards and applicable municipal or federal regulations governing gas distribution systems. The work must ensure that materials meet stringent performance, safety, and durability requirements necessary for reliable operation in public utility infrastructure. Testing protocols must align with recognized industry specifications and include documentation that demonstrates adherence to all technical and regulatory criteria. The contract is classified as a subcontract under NAICS code 541380 and is issued by Utilities Stores in Florida with a response deadline of September 3, 2026. The performance location is not specified, but the testing and certification services are expected to support gas distribution systems within the state. All work must be completed by an accredited and qualified laboratory or certification body capable of providing verifiable, auditable results that meet the technical and contractual obligations outlined in the solicitation.

Utilities Stores

POSTED

DEADLINE

in about 1 month

Field Testing and Data Collection on Revenue-Service LocomotivesThe contract involves performing minimally invasive field and laboratory testing on locomotives currently in active revenue service to assess how aftermarket technologies affect performance under extreme environmental conditions. The work requires deploying testing protocols directly on operating rail equipment to collect real-world data on system behavior, durability, and efficiency without disrupting normal service operations. Testing will be conducted across varied climates and operational loads to ensure comprehensive evaluation of technological impacts on locomotive functionality. The project is structured as a subcontract under the Federal Railroad Administration, part of the Department of Transportation, with performance centered in Washington, DC, and a response deadline of August 21, 2026. The North American Industry Classification System code 541380 identifies the work as other scientific and technical consulting services, indicating a focus on data-driven analysis and engineering evaluation rather than manufacturing or hardware modification. The effort is intended to support regulatory and operational decision-making by providing objective, performance-based evidence on the viability and reliability of new technologies in high-stress railway environments.

693JJ6 Federal Railroad Administration

POSTED

DEADLINE

Nonrecurring Engineering (NRE) and Qualification TestingThe contract requires the execution of qualification testing, first article inspection, and nonrecurring engineering services to secure source approval in compliance with MQR-PSD-1 standards. These activities are essential for validating product designs and manufacturing processes to ensure they meet military and defense requirements prior to full-scale production. The effort encompasses all technical and documentation tasks necessary to demonstrate product conformity and reliability under specified environmental and performance conditions. This is a subcontract solicitation issued under NAICS code 541380, targeted at engineering support services, with a response deadline of August 31, 2026. The contracting activity originates from the Department of Defense through the Ok DLA Aviation office in Oklahoma City, and performance is expected to align with defense logistics agency protocols. All work must fulfill stringent quality control benchmarks to attain formal source approval, with no set-aside classification specified, leaving eligibility open to all qualified contractors.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Inspection, Testing & Quality Assurance ServicesThe contract requires comprehensive inspection, testing, and quality assurance services for aerospace engine components, specifically focusing on first article inspection, non-destructive testing, and material verification, all executed in strict compliance with the AS9102 standard and MQR-PSD-1 requirements. These activities are critical to ensuring dimensional accuracy, material integrity, and conformance to aerospace-grade specifications, with full documentation and quality reporting mandated to support traceability and regulatory compliance throughout the production lifecycle. The work is designated as a subcontract under the NAICS code 541380, indicating specialized scientific and technical consulting services, and is issued by the Department of Defense through its Ok DLA Aviation office in Oklahoma City. The solicitation opens on July 31, 2026, with a firm deadline for responses on August 8, 2026, at 4:59 a.m. Eastern Time, allowing interested parties a limited window to submit proposals. The place of performance and contact details are not specified, suggesting the work may be performed at the vendor’s facility or designated aerospace production sites, subject to further coordination with the contracting office. The absence of a set-aside classification indicates the opportunity is open to all eligible subcontractors without preference for small businesses or other categories, emphasizing technical capability and adherence to aerospace quality standards as the primary evaluation criteria.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Quality Assurance and Inspection ServicesThe contract calls for third-party inspection and testing of roller bearings to ensure full compliance with PWA Spec 725 Steel and applicable government acceptance standards, encompassing first article inspection, in-process validation, and final testing procedures. The work must be carried out with precision to verify material integrity, dimensional accuracy, and performance characteristics under defined operational conditions, ensuring adherence to stringent defense quality requirements. This is a subcontract under the Department of Defense, managed by Ok DLA Aviation at Oklahoma City, with a NAICS code of 541380 indicating engineering and technical services. The solicitation was posted on July 31, 2026, and responses are due by August 31, 2026, requiring qualified providers to demonstrate capability in executing comprehensive quality assurance protocols for critical aerospace components. The place of performance and specific point of contact are not detailed, but the work will support military-grade procurement standards through rigorous, certified inspection processes.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

in about 1 month

Color Quality Assurance and Testing ServicesThe contract seeks independent spectrophotometric testing and certification services to verify the color accuracy of HDPE board materials against the FED-STD-595C color standard, ensuring strict compliance with federal specifications. This subcontract is designated as a Small Business Set Aside under NAICS code 541380, indicating it is reserved exclusively for small businesses to perform the required precision color measurements and出具 certification documentation. The work must be conducted in accordance with approved methodologies to guarantee consistency and reproducibility in color evaluation across production batches. The opportunity was posted on July 31, 2026, with a response deadline of August 14, 2026, and the place of performance is specified as ZIP code 21502. The contracting entity is Dba Federal Prison Industries, operating under the U.S. Department of Justice, and the service is intended to support quality assurance protocols for materials used in federal applications. Although no point of contact or office address is provided, the solicitation is accessible via the SAM.gov portal, and interested small businesses must submit their proposals prior to the deadline to be considered for award.

Dba Federal Prison Industries United States Department Of Justice

POSTED

DEADLINE

Sample Preparation and Pretreatment ServicesThe contract requires comprehensive chemical pretreatment of biological samples for isotopic analysis, encompassing collagen extraction from bone, keratin extraction from hair, and lipid removal from various matrices, all performed under strict contamination control protocols to ensure analytical integrity. Each step must be meticulously documented with chain-of-custody records, reagent logs, and quality assurance data to maintain traceability and method consistency across all samples processed. The work is to be executed at a designated facility with a place of performance in 20301, adhering to protocols established for high-precision isotopic studies, with an emphasis on preventing cross-contamination and preserving sample integrity throughout preparation. The solicitation is issued as a subcontract under NAICS code 541380 by the Department of Defense through Washington Headquarters Services, with proposals due by August 7, 2026, and the opportunity posted on July 31, 2026, indicating a compressed submission window that demands urgent, precise, and fully compliant responses from qualified service providers.

Washington Headquarters Services

POSTED

DEADLINE

Stable Isotope Ratio Mass Spectrometry (IRMS) AnalysisThe contract requires the execution of high-precision isotopic analysis on biological samples such as bone, tooth, and hair using Isotope Ratio Mass Spectrometry to aid in human identification endeavors. This involves full-cycle service including sample preparation, instrument calibration, data collection, and rigorous quality control procedures to ensure accuracy and reliability of results. The work is intended to support defense-related identification objectives and must adhere to strict analytical standards to produce defensible isotopic signatures. Performed under a subcontract classified under NAICS code 541380, the task is managed by the Washington Headquarters Services under the Department of Defense with performance expected at a location with zip code 20301. The opportunity was posted on July 31, 2026, with responses due by August 7, 2026, and requires contractors to demonstrate technical expertise in stable isotope analysis and experience in forensic or anthropological contexts. All work must be completed within the specified timeframe and in alignment with DoD protocols, though no set-aside provisions or point of contact details are provided.

Washington Headquarters Services

POSTED

DEADLINE

More opportunities from Texas Department Of Transportation

Same awarding agency

MOXA NETWORKING EQUIPMENT BPO

Solicitation # 601440000053527

The Texas Department of Transportation is soliciting submissions for the procurement of MOXA networking equipment under solicitation number 601440000053527, titled MOXA NETWORKING EQUIPMENT BPO. This opportunity is open to qualified vendors who can provide the specified networking hardware required by the agency, and all responses must be submitted by the deadline of August 14, 2026, at 8:00 PM CT. Submissions received after this time will not be accepted. Interested parties are responsible for regularly monitoring the solicitation webpage for any amendments, clarifications, or updates, as all changes and additional information will be posted there exclusively. The contract will be awarded under the jurisdiction of the Texas Department of Transportation based in Texas with no specific set-aside classification indicated. Primary point of contact for questions and coordination is Steven Schoenthal, CTCD, CTCM, reachable via phone or email at 210-323-1651. The equipment will be delivered to performance locations within the state of Texas, and vendors are expected to comply with all terms and technical specifications outlined in the official solicitation documents.

Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

about 20 hours ago

DEADLINE

Logistics and Distribution of Pre-Qualified SealersThe contract involves the logistics, warehousing, kitting, and just-in-time delivery of pre-approved joint sealers to Texas Department of Transportation project sites throughout the state, with a primary focus on the Lubbock District. The successful bidder will be responsible for maintaining inventory, preparing kits according to project specifications, and ensuring timely delivery to support ongoing road and bridge maintenance operations. All sealers must be pre-qualified by TxDOT and delivered on a schedule that aligns with field work timelines to minimize project delays. This is a subcontract opportunity classified under NAICS code 493190, with responses due by August 7, 2026. The work is tied directly to TxDOT’s infrastructure needs and requires a robust distribution network capable of handling statewide logistics while meeting strict quality and timing standards. Providers must demonstrate experience in handling specialized construction materials and the ability to operate efficiently within TxDOT’s operational framework, particularly in the Lubbock region where demand is concentrated. All activities must be performed in compliance with TxDOT’s requirements for material handling, documentation, and delivery protocols.

Other Warehousing and Storage

POSTED

about 21 hours ago

DEADLINE

Supply of Non-Sagging (NS) Silane-Terminated Polymer (STP) SealersThe contract calls for the supply of non-sagging silane-terminated polymer sealants designed specifically for vertical and overhead joint applications, ensuring they meet the stringent technical requirements outlined in TxDOT specification 201-10-1 and are listed on the official approved materials list. These sealants must maintain structural integrity and performance under challenging conditions without slumping or sagging, making them suitable for use in transportation infrastructure projects where durability and long-term weather resistance are critical. This is a subcontract opportunity posted by the Texas Department of Transportation with a response deadline of August 7, 2026, and a North American Industry Classification System code of 325520, indicating it falls under the manufacturing of other chemical product category. The solicitation is open for bid through the TxDOT BonfireHub portal, and while no set-aside provisions or organizational type details are specified, the performance location and point of contact are not defined, suggesting the scope may be statewide or determined by project needs. Interested parties must submit proposals before the deadline to be considered for inclusion in TxDOT’s material supply chain.

Adhesive Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supply of Self-Leveling (SL) Polyurethane Joint SealersThe contract entails the supply of self-leveling polyurethane sealants specifically engineered for use in pavement joints, with strict requirements for flow characteristics to ensure proper application and performance under Texas conditions. The sealants must fully comply with TxDOT specification 201-30-1 and have been pre-qualified under Compliant v4 or v5, confirming their suitability and adherence to state infrastructure standards. The work is structured as a subcontract opportunity with no set-aside classification, targeting vendors capable of delivering certified materials that meet technical benchmarks for durability, weather resistance, and joint integrity. The solicitation was posted on July 31, 2026, with responses due by August 7, 2026, providing a seven-day window for submission. The North American Industry Classification System code 325520 identifies the category as specialty chemical manufacturing, aligning with the production of polymer-based sealants. The contracting agency is the Texas Department of Transportation, with the performance location unspecified but presumed to be statewide as part of routine pavement maintenance and construction initiatives. All bids must be submitted through the official Bonfire Hub platform linked in the posting.

Adhesive Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supply of Rapid Cure Silicone Joint Sealers (Class 8 – RCS)The contract is for the supply of rapid-curing silicone-based joint sealers in 40 oz sausage kits specifically intended for use in bridge deck joints, meeting the stringent requirements of TxDOT Specification 201-20-1 and holding pre-approval under the Gold Star Program. The product must deliver reliable performance under challenging environmental and traffic conditions, ensuring durability and long-term integrity of bridge joint systems. Suppliers are expected to provide materials that comply precisely with technical standards without requiring additional approvals, streamlining installation and quality assurance for field crews. The solicitation is classified as a subcontract under NAICS code 325520, indicating the manufacturing of other chemical products, and is being managed by the Texas Department of Transportation. Responses must be submitted by August 7, 2026, at 10:00 PM Central Time, following a posting date of July 31, 2026. The opportunity is open to qualified vendors through the BonfireHub platform, with no set-aside type designated. The place of performance and specific delivery locations are not detailed in the provided data, but the materials will be utilized across TxDOT bridge infrastructure projects throughout Texas.

Adhesive Manufacturing

POSTED

about 21 hours ago

DEADLINE

Rental & Maintenance of Comfort Station Units with External Tank – Calhoun Co. Maintenance

Solicitation # 601320000071291

The Texas Department of Transportation is seeking proposals to establish a contract for the rental, delivery, pickup, cleaning, and maintenance of portable comfort station units equipped with external holding tanks, specifically for use by Calhoun County Maintenance in Highway District 13. All services must be performed reliably and in accordance with operational standards to ensure sanitary and functional units are available as needed. Respondents must carefully review the solicitation details and monitor the official website for any amendments, addenda, questions, or updates, as all changes will be posted there and are binding. No submissions will be accepted after the stated deadline. The solicitation, identified by number 601320000071291, was posted on July 31, 2026, with responses due by 8:00 PM on August 14, 2026. The contract is managed by the Texas Department of Transportation under the agency office in Texas, with Linda Mena designated as the primary point of contact for inquiries via linda.mena@txdot.gov. Performance of services is required within Calhoun County, Texas, and all bids must be submitted through the designated online portal. Failure to adhere to submission deadlines or to stay informed of updates may result in disqualification.

POSTED

about 21 hours ago

DEADLINE

Environmental Regulatory Records Search

Solicitation # 601440000053962

The Texas Department of Transportation is soliciting services to conduct environmental regulatory records searches in support of hazardous materials investigations. This contract requires qualified vendors to perform comprehensive searches of environmental regulatory databases and records to identify potential contamination issues, historical use of sites, and compliance history related to hazardous substances. The work is critical to ensuring TxDOT’s projects adhere to environmental regulations and risk management protocols during planning and development phases. All responses must be submitted by August 14, 2026, at 8:00 PM CT, with no exceptions or late submissions accepted after the deadline. All information regarding this solicitation, including amendments, clarifications, or additional documentation, will be posted exclusively on the official website listed in the solicitation. The primary point of contact for inquiries is Shannon Jordan, reachable via phone or email at 210-322-9340. The services will be performed throughout the state of Texas, and there is no specified set-aside or NAICS code provided for this opportunity. Prospective bidders are responsible for regularly monitoring the solicitation portal to ensure full compliance with all instructions, requirements, and updates.

Environmental Consulting Services

POSTED

about 21 hours ago

DEADLINE

Rental of a Windrow Elevator Without Operator for TxDOT Abilene District

Solicitation # 601440000053918

The Texas Department of Transportation is soliciting bids to establish a contract for the monthly rental of a Weiler E550D windrow elevator without an operator for use in the Abilene District. The solicitation, numbered 601440000053918, was posted on July 31, 2026, and responses must be submitted by August 31, 2026, at 8:00 PM Central Time; late submissions will not be accepted. All updates, including addendums, questions, answers, or changes to the solicitation, will be posted exclusively on the official website, and bidders are responsible for monitoring the site regularly to ensure compliance with any modifications. The equipment is intended for use in Texas, with no specific city designated for performance, and the contract is managed by TxDOT’s Abilene District under the oversight of Brian Jordan, CTCD, who can be reached via phone or email at 512-416-4739. The solicitation does not specify a set-aside classification or NAICS code, and no operator services are included in the rental terms.

Construction, Mining, and Forestry Machinery and Equipment Rental and Leasing

POSTED

about 21 hours ago

DEADLINE

in about 1 month

Joint Sealer and Tools for the Lubbock District

Solicitation # 601340000066820

The Texas Department of Transportation is seeking proposals for joint sealant and related tools under solicitation number 601340000066820, specifically requiring SIKASIL 728 RCS, a rapid cure system silicone sealant in 40 oz sausage kits, intended for use on bridges. Responses must be submitted by the deadline of August 7, 2026, at 10:00 PM Central Time, and no submissions will be accepted after this time. All updates, addenda, questions, and answers related to this solicitation will be posted exclusively on the official website, and respondents are responsible for monitoring the site for any changes. The contract is managed by the Lubbock District, with performance expected within the state of Texas. Primary point of contact for inquiries is Jane Graf, CTCD, CTCM, reachable via phone or email at 682-217-4624. The solicitation was posted on July 31, 2026, and is not subject to any set-aside classifications.

Adhesive Manufacturing

POSTED

about 21 hours ago

DEADLINE

Statewide Video Sharing Solution (STVS)

Solicitation # 601440000054019

The Texas Department of Transportation is seeking proposals for a statewide traffic video sharing solution under solicitation number 601440000054019, which is a re-advertisement of a prior request. The contract aims to establish a comprehensive system for sharing traffic video data across the state to support transportation management, public safety, and infrastructure planning. All information, including any amendments, questions, answers, or updates related to this solicitation, will be posted exclusively on the official website, and respondents are responsible for monitoring the site regularly to ensure they have the latest details. The deadline for submitting responses is August 24, 2026, at 8:00 PM Central Time, and no submissions will be accepted after this date and time. The point of contact for this solicitation is Jason Andrews, CTCD, CTCM, reachable via phone or email at 979-778-9616. Performance of the contract is expected to be statewide across Texas, with no specific city designated. There is no set-aside designation or NAICS code provided, indicating this opportunity is open to all qualified vendors without restriction based on small business or other categories. The official posting and any related documents can be accessed through the provided online portal, and all communication regarding this opportunity must be conducted through the designated website to ensure compliance and accuracy.

Media Streaming Distribution Services, Social Networks, and Other Media Networks and Content Providers

POSTED

about 23 hours ago

DEADLINE

Testing and Certification ServicesThe contract solicits independent laboratory testing services to ensure compliance with FCC, NEMA, and IEC 61000-4-5 standards for product validation and bid submission purposes. The work is intended to support technical due diligence and regulatory readiness, likely in alignment with transportation infrastructure projects under the Texas Department of Transportation. Testing must be conducted by qualified third-party labs capable of delivering accurate, accredited results that meet U.S. and international electromagnetic compatibility and safety requirements. The opportunity is structured as a subcontract with a response deadline of August 13, 2026, and falls under NAICS code 541380 for other scientific and technical consulting services. The solicitation was posted on July 30, 2026, and while the office address and point of contact are not provided, the place of performance is expected to be tied to the testing facility’s location, with no geographic restriction specified beyond the awarding agency’s Texas jurisdiction.

Testing Laboratories and Services

POSTED

DEADLINE

Technical Training and Field Support ServicesThe contract solicits technical training and field support services for the Texas Department of Transportation to deliver on-site classroom and field-based instruction on the operation and maintenance of CTAD systems. Training will be provided directly to TxDOT personnel at locations across the state, ensuring hands-on competency and operational readiness. The scope encompasses both theoretical instruction and practical field exercises designed to build proficiency in managing CTAD technology throughout its lifecycle. The opportunity is classified as a subcontract under NAICS code 611430, indicating it involves educational and training services. The posting date is July 30, 2026, with proposals due by August 13, 2026. All performance activities are expected to occur within Texas, with no specific city or zip code designated for the place of performance, allowing flexibility based on TxDOT's operational needs. The contract does not specify a set-aside status or organizational type restriction, and the point of contact information is not provided in the public posting.

Professional and Management Development Training

POSTED

DEADLINE