Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Construction of Mission-Critical Laboratory Facility

Active

Federal

Response Deadline08/10/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

NASA Glenn Research Center is soliciting a subcontract for the full construction of a mission-critical laboratory facility designed to meet stringent federal safety and operational standards. The scope encompasses the development of a comprehensive facility including administrative zones, high-bay test areas, and essential support infrastructure to enable advanced aerospace research and testing. The project must be executed in strict compliance with all applicable federal regulations, with performance designated to occur at a location with zip code 44135. The opportunity was posted on July 31, 2026, and responses are due by August 10, 2026. The North American Industry Classification System code for this effort is 236220, indicating a focus on commercial and institutional building construction. This subcontract is part of NASA’s broader initiative to expand and modernize its research capabilities through private sector partnerships.

General Info

Construct mission-critical lab at 44135 per federal standards, due August 10, 2026, for aerospace research.

Agency

National Aeronautics And Space Administration → NASA Glenn Research CenterView Agency

NAICS

236220 - Commercial and Institutional Building ConstructionView NAICS

Place of Performance

OH, 44135, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 31

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 12:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNational Aeronautics And Space Administration → NASA Glenn Research Center

ContactsNo contacts available

OfficeN/A

Organization / Agency

National Aeronautics And Space Administration → NASA Glenn Research Center

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Full construction of a new laboratory with administrative zones, high-bay test areas, and support infrastructure, compliant with federal safety and operational standards.

Similar Contracts

Same NAICS industry code

Checkpoint Security Grill Replacement - DBBThe Port of Seattle through its Aviation Project Management Group is forecasting a procurement under NAICS code 236220 for the full design, permitting, and construction services to replace the Checkpoint 5 security grill. The scope encompasses a comprehensive range of activities including site assessment, development of design drawings and technical specifications compliant with TSA CRPG Section 3-5, submission for regulatory review and permit acquisition, demolition and proper disposal of the existing grill, fabrication and installation of the new system, and seamless integration with existing structural, electrical, and security badge access systems. Coordination with all relevant stakeholders is required to ensure adherence to safety and operational standards while minimizing disruption to airport functions. The project is structured under a design-build-bid delivery method and is being managed by the Port of Seattle with primary contact Yanet Maldonado and project manager Collette Deardorff available for inquiries. The solicitation was posted on July 31, 2026, and while no specific award date or set-aside details are provided, the location of performance is tied to the Port of Seattle’s facilities. All work must be executed with strict attention to federal security requirements and operational continuity in a high-traffic aviation environment.

Aviation Project Management Group

POSTED

about 10 hours ago

DEADLINE

Rental Car Facility (RCF) Customer Service Building (CSB) Re-DemisingThe contract involves a comprehensive renovation and structural upgrade of the Customer Service Building at the Rental Car Facility to prepare for a new concession agreement and tenant construction beginning June 1, 2027. Key improvements include updating wayfinding signage to reflect new tenant layouts, constructing a new break room and flex space to support transit operations, renovating existing restrooms, and replacing outdated car wash equipment in the Quick Turn Around areas. Structural enhancements are also required to address cracking and repair post-tension cables, along with replacing expansion joints on the fifth floor plaza areas to ensure long-term durability and safety. These modifications are designed to modernize the facility and align its infrastructure with future operational needs. The project is managed by the Port of Seattle’s Aviation Project Management Group, with official point of contact Angela Peterson and Project Manager Julia Ruzon overseeing procurement and implementation. The work falls under NAICS code 236220, indicating commercial building construction, and is forecasted with a posted date of July 31, 2026. While no solicitation number or set-aside details are provided, the scope underscores a major capital improvement initiative focused on functionality, tenant readiness, and structural integrity for a high-traffic facility serving airport operations.

Aviation Project Management Group

POSTED

about 10 hours ago

DEADLINE

General Construction ManagementThe contract outlines a comprehensive construction management engagement for the full execution of a project, encompassing all labor, materials, equipment, and coordination of subcontractors to ensure delivery in strict accordance with the approved design and contract documents. The scope is end-to-end, requiring the contractor to oversee every phase of construction from inception to completion, ensuring functionality, compliance, and timely delivery under a single prime responsibility. This is a subcontract under the NAICS code 236220 for Commercial and Institutional Building Construction, issued by the Economic Development agency of Connecticut. The solicitation was posted on August 1, 2026, with a firm deadline for responses on August 25, 2026. While specific project location and point of contact details are not provided, the place of performance is tied to Connecticut, and the procurement is accessible via a public portal link. There is no set-aside classification indicated, and the contract does not specify any restrictions on bidder eligibility beyond standard subcontract terms.

Economic Development

POSTED

about 16 hours ago

DEADLINE

C26863001 MOUNT DIABLO - Mitchell Canyon Education Center

Solicitation # 0000039942

The project involves constructing the Mitchell Canyon Education Center at Mount Diablo State Park in Contra Costa County, California, with a mandatory job showing required for all bidders as outlined in the Notice to Contractors. Prospective bidders must download the complete bid package, including plans, specifications, and any addenda, from the official website, and it is their responsibility to regularly check for updates. All questions regarding ambiguities, conflicts, or omissions in the contract documents must be submitted via email to merrilee.byrnes@parks.ca.gov no later than two p.m. seven calendar days before the bid opening; responses will be issued as addenda on the site, and bidders must ensure they have the most current versions. Participation in the Disabled Veteran Business Enterprise Program is mandatory, with a minimum 6% participation goal, and failure to meet this requirement will result in a non-responsive bid. Bidders exceeding the DVBE goal may receive an evaluation incentive as specified in the DPR 479IP forms. A five percent small business preference is available for properly certified small businesses that submit a completed STD 811 Form with their bid. Compliance with California’s Public Works Contractor Registration Program under SB 854 is strictly required: all contractors and subcontractors must be registered with the Department of Industrial Relations to both submit a bid and receive an award, and this project is subject to enforcement and monitoring by the department.

California Department of Parks & Recreation

POSTED

DEADLINE

in about 1 month

RFP - Nantucket Public Schools New Modular Administration Building

Solicitation # BD-27-1301-2-2-132018

The Town of Nantucket, through the Nantucket Public Schools, is issuing a request for proposals to design and construct a new modular Administration Building under the guidelines of MGL Chapter 149. Proposals must be submitted by August 19, 2026, and encompass both non-price and price components to ensure comprehensive evaluation of technical and financial aspects. All solicitation documents are accessible via the Town’s Procurement page, with the official RFP identified by solicitation number BD-27-1301-2-2-132018 and posted on July 31, 2026. The project will be performed at Washington Street in Nantucket, Massachusetts, with the new building intended to serve as a dedicated administrative facility for the school district. The procurement is managed by the Town Administration under the oversight of the Commonwealth of Massachusetts and is not subject to any specific set-aside classification. Cindy Hsu serves as the primary point of contact for all inquiries related to the proposal process. Bidders are expected to comply fully with state construction regulations and submit their responses through the designated online portal hosted by CommBuys. The solicitation does not specify a NAICS code or set-aside requirements, leaving eligibility open to all qualified contractors capable of meeting the technical and regulatory demands of modular construction under Massachusetts law. Interested parties are advised to review all documentation thoroughly to ensure alignment with design standards, timelines, and compliance obligations prior to submission.

2 - Town Administration

POSTED

DEADLINE

Municipality of Jasper - Request for Expression of Interest - Wildflowers Childcare Expansion and Mezzanine Renovation

Solicitation # AB-2026-05466

The Municipality of Jasper is advancing the Wildflowers Childcare Expansion Project, an interior renovation at the Jasper Activity Centre that will transform existing storage areas into a licensed daycare playroom with 22 new full-time childcare spaces and construct a new mezzanine level above to accommodate a viewing platform for the Jasper Gymnastics Club, a flexible meeting area, and three to four offices. The project involves significant structural modifications including independent foundations, steel framing, and a composite deck to support the mezzanine, along with comprehensive mechanical and electrical upgrades such as two new rooftop HVAC units, updated fire alarm systems, and a building code reclassification to meet occupancy requirements. Construction will occur without interrupting ongoing operations at the daycare or gymnastics program. The estimated budget is $1.2 million, and timing is influenced by both immediate community needs for childcare and grant reporting deadlines. To prepare for the next procurement phase, the Municipality is issuing a Request for Expression of Interest to assess contractor interest, identify potential risks, evaluate market capacity, and establish a shortlist of qualified respondents who meet the minimum qualifications for a future restricted Invitation to Tender once design is finalized. This RFEI is not a solicitation for bids nor a binding procurement step; no contract will be awarded from it, and the Municipality retains full discretion over any future actions.

Municipality of Jasper

POSTED

DEADLINE

General Construction Management and Subcontractor OversightThe contract requires comprehensive management and coordination of multiple trade subcontractors to ensure seamless execution of construction activities under strict adherence to technical specifications, safety protocols, and project schedules. The responsible party must oversee all subcontractor operations to guarantee compliance with quality standards while proactively addressing potential delays or hazards to maintain uninterrupted progress on-site. This role demands strong organizational capabilities, continuous monitoring of subcontractor performance, and effective communication to align all parties with the project’s overarching goals. The contract is classified under NAICS code 236220 for commercial building construction and is issued by the Texas Department of Public Safety. It is solicited as a subcontract opportunity with a response deadline of August 14, 2026, and was posted on July 31, 2026. The place of performance and specific location details are not provided, but the work is expected to occur within Texas under the oversight of the state agency. The contract's success hinges on the contractor’s ability to maintain rigorous safety compliance, meet all scheduling milestones, and coordinate diverse trade teams without disruption.

Department of Public Safety

POSTED

DEADLINE

Odessa Area Office Renovation

Solicitation # 405-26R0020741

The Texas Department of Public Safety is soliciting proposals for the renovation of its Odessa Area Office located at 1910 W I-20, Odessa, Texas. The project encompasses comprehensive construction activities including demolition, framing, drywall, painting, flooring, electrical work, and HVAC system installation, along with post-construction cleanup, all to be performed in strict compliance with approved construction documents and technical specifications. All work must be executed while maintaining normal DPS operations, requiring the contractor to develop a detailed phasing and coordination plan aligned with PMBOK standards, including risk and change management processes. The project timeline demands completion by August 31, 2027, with a contract term of one year and an optional six-month extension. A mandatory pre-proposal site visit is scheduled for August 6, 2026, at 10:00 A.M. CT, with participants required to sign in by 9:45 A.M. Proposals must be submitted electronically no later than 5:00 P.M. Central Time on August 14, 2026, via the DPS Online Bid Room or to DPS_Solicit_Response@dps.texas.gov, and must conform to a strict two-volume format. Volume One includes completed mandatory forms such as the W-9, AP-152, Certificate of Existence, Certificate of Account Status, and Direct Deposit Authorization, while Volume Two must contain organizational capabilities, key personnel résumés with time allocation percentages, project references, a Gantt-charted schedule, business continuity and disaster recovery plans, and VPAT documentation for accessibility compliance. All submissions must use a 12-point sans serif font, be paginated, and include a full table of contents without extraneous material. The contract requires all personnel to undergo a DPS fingerprint-based criminal history background check and maintain security clearance throughout performance. Subcontracting plans must comply with Texas HUB requirements, including monthly Progress Assessment Reports and notifications to the HUB Office. Contractors must provide evidence of appropriate insurance coverage, adhere to ASTM, ANSI, and IBC standards, and ensure all materials are delivered and stored per manufacturer guidelines to prevent damage. Invoices must be submitted electronically to apinvoices@dps.texas.gov per state standards, and the Contract Administrator, Norma Cervantes, and Contract Monitor, Ryan Medder, serve as the primary points of contact for procurement and technical oversight.

Department of Public Safety

POSTED

DEADLINE

Construction Manager at Risk / General Contractor (CMGC) ServicesBroward County is seeking a Construction Manager at Risk / General Contractor to provide comprehensive CMGC services for upcoming construction projects, including development of good manufacturing practices, detailed construction sequencing, accurate cost estimating, and full-phase construction support to ensure project efficiency and compliance. The contract is structured as a subcontract with a NAICS code of 236220, indicating it falls under the construction of commercial and institutional buildings, and responses are due by August 7, 2026, with the opportunity posted on July 31, 2026. All work is expected to be performed within Broward County, Florida, and the solicitation is open to qualified firms capable of delivering integrated construction management services under a risk-sharing model that emphasizes early collaboration, cost certainty, and schedule reliability.

POSTED

DEADLINE

SJC - Sheriff's Office Facility and EMS Facility Design-Build Project

Solicitation # 26209

San Joaquin County is soliciting proposals for the Design-Build of a new Sheriff’s Office Facility and EMS Facility to be located in California. The project is targeted for delivery through an integrated design and construction approach, streamlining accountability and schedule efficiency. The solicitation, identified by number 26209, was posted on July 31, 2026, with a firm deadline for submissions set for September 4, 2026, at 10:00 p.m. Pacific Time. This initiative falls under the SLED classification, reflecting its status as a state, local, or education agency procurement. The project will be executed at a location within San Joaquin County, with full performance requirements and design specifications to be detailed in the full solicitation documents accessible via the provided online portal. Vanessa Gagnon serves as the primary point of contact for inquiries, reachable via email at vgagnon@sjgov.org or by phone at (209) 468-3256. No set-aside provisions are specified, indicating the opportunity is open to all qualified proposers regardless of business size or classification.

San Joaquin County

POSTED

DEADLINE

in about 1 month

General Fire Station Building RepairsThe contract pertains to comprehensive structural and architectural repairs at fire station facilities across Georgia, addressing damage caused by a hurricane. Scope of work includes restoration and reinforcement of walls, roofs, doors, windows, flooring, and interior finishes to ensure full operational readiness and compliance with safety standards. All repairs must meet applicable building codes and withstand future environmental stressors, with attention to durability and functionality of critical emergency response infrastructure. Subcontractors are invited to respond by the deadline of September 1, 2026, under the NAICS code 236220 for heavy and civil engineering construction. The contract is issued by the Georgia State Financing and Investment Commission and is classified as a subcontract, with no specific set-aside provisions indicated. Work is to be performed at various fire station locations throughout the state, though exact sites are not specified in the posting. Proposals must demonstrate technical capability, experience in disaster recovery construction, and ability to complete work within required timelines to support continued public safety operations.

Georgia State Financing and Investment Commi

POSTED

DEADLINE

in about 1 month

160956 Dillwyn Combination Building & Fuel Center

Solicitation # IFB-125375

Sealed bids are being solicited for the construction of a combination administrative and fuel facility at 147 Thomas Road in Dillwyn, Virginia, consisting of a single-story building approximately 4,998 square feet in size, divided into a 2,416 square foot administrative office and a 2,582 square foot two-vehicle storage and maintenance bay. The project also includes a fuel facility featuring a raised concrete island with dispensers for gasoline and diesel, an automated fuel management system, and a 24 by 32 foot pre-engineered metal canopy. Underground storage consists of a 2,000-gallon gasoline tank and a 10,000-gallon diesel tank. All necessary site preparation, demolition of existing structures, plumbing, HVAC, and electrical systems must be completed to ensure a fully operational facility. The solicitation, identified as IFB-125375, is issued by the Virginia Department of Transportation and is open for bid through August 28, 2026, with responses due by 7:00 PM Eastern Time. The point of contact for inquiries is Kareem Rahman, reachable via email or phone.

Virginia Department of Transportation

POSTED

DEADLINE

More opportunities from National Aeronautics And Space Administration → NASA Glenn Research Center

Same awarding agency

Subcontracting Compliance & Reporting (for Non-Small Businesses)This contract requires non-small business prime contractors to develop and execute a formal small business subcontracting plan as a condition of award, ensuring meaningful opportunities for small businesses in the performance of work under the agreement. The effort is tied to NAICS code 541611, which pertains to management consulting services, and is managed by NASA Glenn Research Center with performance expected to occur in Cleveland, Ohio, ZIP 44135. The plan must outline specific goals and strategies for subcontracting to small businesses, including small disadvantaged businesses, women-owned small businesses, HUBZone small businesses, and service-disabled veteran-owned small businesses, and must include measurable targets for participation. Compliance with the plan is mandatory, and regular reporting on subcontracting activities will be required throughout the contract period to demonstrate adherence to federal small business participation requirements. The solicitation is open with a response deadline of August 10, 2026, and applies exclusively to prime contractors that are not classified as small businesses. While no set-aside designation is specified, the obligation to implement and adhere to a small business subcontracting plan remains a central contractual requirement. Contractors must be prepared to document efforts to identify, engage, and track small business subrecipients, and may be subject to review or evaluation based on the effectiveness and completeness of their submitted plan. The contract places responsibility on the prime contractor to foster economic inclusion by actively promoting small business involvement across all eligible categories, aligning with NASA’s broader mission to support small business development in federal contracting.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Cryogenic Systems Integration and PipingThe contract pertains to the specialized installation of cryogenic piping and support systems specifically for aerospace power testing at NASA Glenn Research Center, with performance required in Cleveland, Ohio, ZIP code 44135. This subcontract involves highly technical work requiring precision in handling ultra-low-temperature fluids and structural support systems critical to testing advanced propulsion and power systems. The work must adhere to stringent aerospace standards for safety, material integrity, and operational reliability under extreme environmental conditions. The solicitation was posted on July 31, 2026, with responses due by August 10, 2026. The NAICS code 238290 classifies this under Other Specialized Construction Activities, indicating the need for a contractor with niche expertise in cryogenic infrastructure rather than general construction. Although no set-aside designation or point of contact is specified, the project is positioned as a subcontract under NASA’s broader efforts to enhance testing capabilities for next-generation aerospace technologies, and potential bidders must demonstrate proven experience with cryogenic systems in aerospace applications.

Other Building Equipment Contractors

POSTED

DEADLINE

Mechanical, Plumbing, and HVAC Systems InstallationThe contract involves the installation of complex mechanical, plumbing, and HVAC systems designed to support aerospace testing environments with precise temperature and humidity control, critical for NASA Glenn Research Center’s specialized operations. The work is classified under NAICS code 238220, indicating it is a subcontract for mechanical contracting services, and must be performed at a location with a zip code of 44135, which corresponds to the Cleveland, Ohio area where the center is situated. The solicitation was posted on July 31, 2026, with a response deadline of August 10, 2026, indicating a tight turnaround for qualified vendors to submit proposals. The systems required must meet stringent aerospace standards to ensure the integrity of testing conditions, demanding advanced engineering capabilities and experience in high-performance environmental control systems. While no specific set-aside or organizational type is identified, the project is directly tied to NASA’s mission-critical research infrastructure, emphasizing the need for technical expertise, regulatory compliance, and reliability in execution.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Electrical Systems Installation (Including Hazardous Zones)The contract involves the installation of advanced electrical systems specifically designed for use in classified hazardous zones, encompassing power distribution, life safety infrastructure, and seamless integration with specialized test equipment. The work requires compliance with stringent safety and operational standards due to the high-risk environments where the systems will be deployed, demanding expert knowledge in hazardous location electrical codes and mission-critical system design. The project is structured as a subcontract under NASA Glenn Research Center, with performance expected to occur in an area identified by the zip code 44135, indicating a likely location within or near Cleveland, Ohio. The solicitation was posted on July 31, 2026, with a response deadline of August 10, 2026, leaving a narrow window for qualified contractors to submit proposals. The North American Industry Classification System code 238210 confirms the scope falls under electrical contracting services, aligning with the technical complexity of the task. While no specific set-aside type is designated, the nature of the work and the federal agency involvement suggest that only vendors with the appropriate security clearances, technical certifications, and proven experience in aerospace or defense-related electrical installations will be competitive. The absence of a point of contact or detailed office address implies that all communications and submissions must follow the official SAM.gov portal link provided.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Detailed Design Engineering (Mechanical, Electrical, Cryogenic Systems)NASA Glenn Research Center is seeking a contractor to provide full detailed design services for the mechanical, electrical, and cryogenic systems of a high-hazard aerospace test facility, with critical integration into vacuum chambers and life safety systems. The scope requires end-to-end engineering expertise to develop precise technical specifications, ensure system interoperability, and meet stringent safety and operational standards for extreme testing environments. The contract is issued as a subcontract under NAICS code 541330, and proposals must be submitted by August 10, 2026, with the work performance location tied to the 44135 zip code area. The project demands advanced technical capabilities in cryogenic fluid handling, high-vacuum system engineering, electrical power distribution under hazardous conditions, and compliance with lifecycle safety protocols for personnel and facility protection.

Engineering Services

POSTED

DEADLINE

Conceptual Design & Technical Proposal DevelopmentNASA Glenn Research Center seeks a subcontractor to develop a conceptual design and technical proposal for a mission-critical aerospace laboratory that includes administrative facilities, high-bay test spaces, and full integration of Government Furnished Equipment. The deliverables must align with NASA’s operational and safety standards, ensuring the design supports advanced aerospace testing and research activities. The proposal must demonstrate technical feasibility, compliance with federal requirements, and a clear path for implementation, with particular emphasis on scalability, modularity, and compatibility with existing NASA infrastructure. Responses are due by August 10, 2026, under a subcontract agreement classified under NAICS code 541310 for architectural and engineering services. The place of performance is specified as 44135, indicating the project is tied to NASA Glenn’s primary facility in Ohio. The contractor is expected to work collaboratively with government stakeholders to refine requirements and incorporate GFE seamlessly into the laboratory design. This effort is foundational to future mission readiness and requires a comprehensive understanding of aerospace systems, facility integration, and government procurement protocols.

Architectural Services

POSTED

DEADLINE

Amendment 1 to Solicitation 80GRC026R0011 Special Test Equipment (STE) Vacuum Chamber 3 (Chamber Shell, Thermal Shroud, and Thermal Conditioning Unit (TCU)

Solicitation # 80GRC026R0011

NASA Glenn Research Center is soliciting proposals for the design, fabrication, and delivery of specialized test equipment consisting of one custom rectangular thermal vacuum chamber, one thermal shroud, and one thermal conditioning unit, as part of solicitation number 80GRC026R0011. This combined synopsis and solicitation follows FAR Subpart 12.6 guidelines for commercial items and does not include any set-aside provisions, making it open to all qualified vendors. The equipment is critical for simulating space environmental conditions and must meet stringent performance and reliability standards for use in aerospace research and testing. Proposals must be submitted by August 7, 2026, at 4:00 p.m. Eastern Time, with the contract expected to be awarded following a competitive evaluation process. The place of performance is at the Glenn Research Center in Cleveland, Ohio, and all delivered components must be capable of integration and operation at the designated facility. Primary point of contact for inquiries is Paige Foreman, with Eric DiLisi serving as secondary contact, both reachable via their NASA email addresses. The NAICS code 332420 indicates the procurement is targeted toward companies engaged in the manufacturing of industrial machinery and equipment.

Metal Tank (Heavy Gauge) Manufacturing

POSTED

DEADLINE

DRAFT REQUEST FOR PROPOSALS (RFP) - Aerospace Power Systems Laboratory (APSL) Facility

Solicitation # 80GRC026R0010

NASA Glenn Research Center is preparing to issue a full and open solicitation for the design and construction of a new 34,000-square-foot Aerospace Power Systems Laboratory, to be delivered through a two-phase design-build method. The facility will serve as a permanent, code-compliant laboratory supporting the testing and development of advanced aerospace power systems, featuring an open high bay, configurable lab spaces, and associated administrative and collaborative areas, along with essential site work including utilities and pavement. The contractor will be responsible for delivering a fully operational facility with warranty, with completion required within approximately 1,004 calendar days after notice to proceed. The solicitation will be released in two phases: Phase 1, an initial 10 percent design, which may be awarded to multiple offerors, followed by a single Phase 2 award for final design and construction. The North American Industry Classification System code is 236220 with a size standard of $45 million, and all responsible sources are invited to participate. Proposals must be submitted through Sam.gov, and technical and contractual inquiries must be sent via email to the designated contracting officers by June 26, 2026, no later than 1:00 p.m. EST. The RFP for Phase 1 is anticipated on or about July 8, 2026, with offers due by August 10, 2026, and the acquisition is subject to NASA’s Ombudsman clause for dispute resolution.

Commercial and Institutional Building Construction

POSTED

DEADLINE

Technical Documentation & Training DeliveryThe contract requires the development of comprehensive operations and maintenance documentation for a vacuum chamber system and the delivery of hands-on training to up to eight NASA staff members. The documentation must detail procedures for routine operation, troubleshooting common issues, and performing preventive and corrective maintenance, ensuring NASA personnel can independently manage the system after project completion. Training sessions are to be conducted onsite at NASA Glenn Research Center in Cleveland, Ohio, with a focus on practical, real-world application to build competency and confidence in handling the equipment under various operational conditions. The contract is classified as a subcontract with a NAICS code of 541690, indicating it falls under other scientific and technical consulting services. It was posted on July 10, 2026, with responses due by August 7, 2026, and is issued under the National Aeronautics and Space Administration, specifically managed by NASA Glenn Research Center. The place of performance is fixed at Cleveland, Ohio, with no indication of remote work eligibility. The solicitation does not specify a set-aside classification, and there is no designated point of contact listed, which may require proposers to direct inquiries through the SAM.gov portal or general agency channels.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Onsite Installation & CommissioningThe contract requires the contractor to perform final assembly, alignment, leak testing, and commissioning of a vacuum chamber system at NASA Glenn Research Center in Cleveland, Ohio, with all work conducted under government witness. The scope encompasses strict adherence to safety protocols and the completion of final acceptance documentation to ensure the system meets all technical and operational requirements. The work must be executed in full compliance with federal and agency-specific standards, and successful completion will serve as the basis for formal acceptance by NASA personnel. This subcontract is posted under NAICS code 238990 and has a response deadline of August 7, 2026, with the solicitation published on July 10, 2026. The performance location is specifically designated as NASA Glenn Research Center with a zip code of 44135, indicating the physical work site is fixed and must be performed on-site. All activities are subject to government oversight throughout the process, including inspections and documentation review, and the contractor is responsible for ensuring full compliance, proper sequencing of tasks, and timely delivery of certified acceptance records to satisfy contractual obligations.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Thermal Conditioning Unit (TCU) Supply & IntegrationNASA Glenn Research Center is seeking a subcontractor to supply and integrate a Thermal Conditioning Unit capable of achieving extreme thermal conditions within a vacuum chamber. The system must include chillers, heat exchangers, advanced controls, and full PLC/SCADA integration with existing infrastructure to ensure seamless operation and monitoring. The TCU must be engineered to handle rigorous thermal cycling and maintain precise temperature control under high-vacuum environments critical for aerospace testing. Performance specifications demand high reliability, robust thermal management, and compatibility with current facility systems to support mission-critical research and development activities. The contract is posted under NAICS code 333415 for other commercial and industrial machinery and equipment manufacturing, with a response deadline of August 7, 2026. The place of performance is confirmed as Cleveland, Ohio, at the NASA Glenn Research Center facility with a zip code of 44135. This opportunity is structured as a subcontract and does not specify any set-aside provisions. Interested parties must meet technical requirements for thermal performance, control system integration, and compliance with NASA’s infrastructure standards, and submissions must be completed by the stated deadline to be considered.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

Thermal Shroud Design & InstallationThe contract entails the design, fabrication, and installation of multi-layer thermal shrouds using cryogenic-grade materials such as aluminum foil and multilayer insulation to maintain precise thermal control in extreme low-temperature environments. The work requires detailed thermal modeling to ensure performance under operational conditions and seamless integration with the Thermal Control Unit to sustain cryogenic temperatures reliably. All components must meet stringent aerospace standards for durability, insulation efficiency, and compatibility with existing systems. Performance is expected at NASA Glenn Research Center in Cleveland, Ohio, with a deadline for responses set for August 7, 2026. This is a subcontract opportunity classified under NAICS code 332430, which pertains to other fabricated metal product manufacturing. The solicitation was posted on July 10, 2026, and while no set-aside designation or point of contact is provided, the requirement is clearly geared toward specialized contractors with expertise in cryogenic thermal systems and aerospace-grade fabrication.

POSTED

DEADLINE