Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CONTROL STICK, AIRCR

Active
SPE4A5-26-T-317ZFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for a single Control Stick, Aircraft, identified by NSN 1680-00-054-3600 and part number 209-001-334-007, supplied by Bell Textron Inc. The item is classified as a critical application item and must comply with DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129 marking standards, with no special marking required. Packaging must be palletized according to DLA directives and use E5 unit containers with preservative method 10 and non-corrosive dry packaging. Delivery is due within 20 days FOB origin to a military recipient in Kaohsiung, Taiwan, with zero variance allowed in quantity. Inspection and acceptance occur at origin, and sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances unless otherwise specified. Attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively for critical, major, and minor characteristics. The supplier must comply with DLA’s Master List of Technical and Quality Requirements, and configuration changes require an Engineering Change Proposal or variance request. Cybersecurity Maturity Model Certification Level 2 self-assessment is required, and government identification must be removed from non-accepted supplies. Documentation for source approval is mandatory, and the contract is subject to Covered Defense Information provisions. The solicitation number is SPE4A5-26-T-317Z with a response deadline of August 10, 2026, and the required delivery date is August 4, 2026.

General Info

One control stick, NSN 1680-00-054-3600, DLA packaging, FOB origin, delivery to Kaohsiung by August 4, 2026.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-317Z.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
Kay Bates
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CONTROL STICK,AIRCR
CONTROL STICK, AIRCRAFT
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
CRITICAL APPLICATION ITEM
BELL TEXTRON INC 97499 P/N 209-001-334-007
SPE4A5-26-T-317Z
SECTION B
PR: 7017702724 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017702724 0001 EA 1.000
NSN/MATERIAL:1680000543600
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
FREIGHT FORWARDER:
MULTIPLE FORWARDERS EXIST. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANS SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
BTWZ00
TAIWAN ARMY
ZUO-YING AMMUNITION SUB
NO. 127, GUSHAN 3RD RD
KAOHSIUNG CITY
TW
MARKFOR
BTWZ00
TAIWAN ARMY
ZUO-YING AMMUNITION SUB
NO. 127, GUSHAN 3RD RD
KAOHSIUNG CITY
TW
M/F: (TCN) PTWZ5V62082018
RDD:
PROJ: TP 2
SPE4A5-26-T-317Z
SECTION B
PR: 7017702724 PRLI: 0001 CONT’D
SUPP ADD: BA4KMX SIG: L
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A01 DIST: F9B ADV: 2L FC: 48
Need Ship Date:00/00/0000 Original Required Delivery Date:08/04/2026
SPE4A5-26-T-317Z NSN/Part Number: 1680-00-054-3600 Quantity: 1 EA Purchase Request: 7017702724QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
PLUG, INLET, HIRSS
Solicitation # SPE8EF-26-T-1538
The contract pertains to the procurement of one unit of a PLUG, INLET, HIRSS with NSN 1730-01-246-6758 and part number 70700-20514-042, supplied by SIKORSKY AIRCRAFT CORPORATION and AIRBORNE INDUSTRIES INC. Delivery is required within 20 days from the contract award, FOB origin, with no variance allowed in quantity. The item is designated as a critical application item and must comply with Item Unique Identification (IUID) standards per MIL-STD-130 and the DFARS 252.211-7003 clause. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes other standards such as ASTM D3951. Packaging and labeling must adhere to MIL-STD-129 and DLA packaging regulations, with palletization following RP001 guidelines. Sampling for acceptance follows the SIKORSKY CORP QAP 1201 alternative plan, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. The item must be shipped via the fastest traceable method, excluding parcel post, with delivery directed to a designated U.S. Army facility in Boise, Idaho. The shipment is identified by RDD 777 and is tied to project TP 3 under contract SPE8EF-26-T-1538. The original required delivery date is August 3, 2026, and the contract includes provisions for configuration change management, variance requests, removal of government identification from non-accepted supplies, and compliance with measuring and test equipment standards. All documentation and compliance actions are subject to the DLA Master List revision effective on the solicitation date.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
HARNESS, ENGINE, LH, A
Solicitation # SPE4A5-26-T-318P
The contract pertains to the procurement of three engine left-hand harnesses, part number 209-375-105-101, under solicitation SPE4A5-26-T-318P, with a delivery requirement of 398 days and an original ship date of September 13, 2027. The item is source-controlled, meaning it must be manufactured and tested strictly in accordance with limited rights data held by approved sources, primarily First Electronics Corp. with CAGE code 14532, and no other vendor may quote without prior source approval and submission of a Source Approval Request package. Inspection and acceptance occur at origin, following MIL-STD-1916 or equivalent zero-based sampling plans with stringent acceptance criteria: critical attributes require a zero-defect standard, major attributes are sampled at AQL 1.0, and unspecified attributes are treated as major. The item is classified as a critical application and is subject to DLA’s Master List of Technical and Quality Requirements, which supersede other standards including ASTM D3951. Packaging must conform to MIL-STD-129 and RP001 DLA packaging guidelines, with no variation permitted in quantity. The contract includes cybersecurity compliance requirements under CMMC Level 2 self-assessment and mandates physical identification marking per RQ017. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, PA, with all documentation, traceability, and testing records retained by the supplier. The unit of issue is each (EA), priced at $3.00 per unit for a total value of $9.00.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
UPLOCK ASSEMBLY, SWA
Solicitation # SPE7LX-26-U-9124
The contract pertains to the procurement of a UPLOCK ASSEMBLY, SWAYBRACE with NSN 1095012849952 and part number 116018-1, supplied by L3HARRIS TECHNOLOGIES, INC. under solicitation SPE7LX-26-U-9124. Six units are required at a unit price of $6.00, totaling $36.00, with delivery required within 21 days FOB origin. The item is classified as a critical application item and falls under DLA DIRECT, CONUS coverage. The contract incorporates mandatory technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards including ASTM D3951. Packaging must conform to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization strictly adhering to specified guidelines. The Government prohibits acceptance of surplus stock, and any non-accepted supplies must have government identification removed. Demilitarization procedures for Category I munitions items apply, and the supplier must complete a Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment. Inspection and acceptance occur at the destination, with zero variance allowed in quantity. The unit of issue is each (EA), and the procurement is subject to DoD authorized units of measure.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336413
New
DIBBS
STRIP WING
Solicitation # SPE4A6-26-Q-1212
The contract pertains to the procurement of one unit of a Strip Wing identified by NSN 1560-01-608-2561, with a delivery requirement of 111 days after contract award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment specifies a later revision. The item is subject to Covered Defense Information requirements and must comply with DLA packaging standards. Tailored higher-level quality requirements apply to both manufacturers and non-manufacturers, and inspection and acceptance must occur at the point of origin. Government identification must be removed from non-accepted supplies, and physical identification or bare item marking is required. Item Unique Identification is not mandated per the service customer’s request, with DFARS 252.211-7003(c)(1)(i) governing this exception. Technical data associated with the item is subject to export control under either ITAR or EAR, restricting disclosure to foreign persons anywhere in the world, and DFARS 252.225-7048 is fully applicable. Access to this controlled data is restricted to contractors holding valid US/Canada Joint Certification Program certification, who have completed mandatory DLA training and questionnaire, and have received explicit approval from the DLA controlling authority. The solicitation number is SPE4A6-26-Q-1212, issued on August 2, 2026, with responses due by August 10, 2026, and the contracting office is the ASC Commodities Division under the Department of Defense, with Bryan Distin listed as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A7-26-T-605H
This contract pertains to the procurement of six structural fitting components identified by NSN 0001S00000052 under solicitation SPE4A7-26-T-605H, with a delivery deadline of 588 days after contract award. The requirement is set aside exclusively for small businesses as defined under FAR 19.5, with the NAICS code 336413 indicating the classification under Aerospace Product and Parts Manufacturing. Technical and quality standards referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with specific identifiers R and I directing compliance to documented criteria. The deliverables must adhere to DLA packaging standards and include mandatory documentation for source approval requests. The item is subject to stringent export controls under ITAR or EAR, restricting technical data sharing without explicit authorization, and access is limited to contractors with approved JCP certification, completed DOD export training, and DLA authorization. Compliance with configuration change management is required through engineered change proposals for any deviations or waivers. Inspection and acceptance must occur at the origin, and non-accepted supplies must have all government identification removed. The item includes components governed by Qualified Products Lists or Qualified Manufacturers Lists, necessitating qualification per procurement note H02. Physical marking of the bare item is mandated, though Unique Item Identification is waived per customer request under DFARS 252.211-7003(c)(1)(i). Cybersecurity compliance requires CMMC Level 2 certification by an approved third-party assessment organization. Data related to this procurement is classified as Covered Defense Information under RD002, and the point of contact for inquiries is April Reed at the Department of Defense, with performance located in New Cumberland, Pennsylvania. The solicitation was posted on August 2, 2026, with responses due by August 10, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
FILTER, FLUID
Solicitation # SPE4A7-26-T-605E
This contract is for the procurement of two hydraulic fluid filter assemblies with NSN 1650-00-831-8146 under solicitation SPE4A7-26-T-605E, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The requirement is a Total Small Business Set-Aside under NAICS code 336413, with a response deadline of August 10, 2026, and a delivery date 207 days after contract award. Technical data associated with the item is subject to export control under ITAR or EAR, prohibiting any unauthorized disclosure to foreign persons, regardless of location, and applies to all parties including foreign nationals employed by U.S. companies or subsidiaries. Compliance with DFARS 252.225-7048 is mandatory, and only DLA contractors with approved US/Canada Joint Certification Program certification, completed training on handling DOD export-controlled data, and cleared access through DLA may receive the technical data. The place of performance is Robins Air Force Base, Georgia, and the primary point of contact is April Reed, reachable via email and phone provided.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
ARMOR, SUPPLEMENTAL,
Solicitation # SPE4A7-26-T-606G
The contract is for one unit of supplemental armor for small arms fragmentation, sourced from Foster-Miller, Inc. with CAGE code 30233 and NSN 1560-01-434-6349, under solicitation number SPE4A7-26-T-606G. Delivery is required within 20 days FOB origin to North Kingston, Rhode Island, with no tolerance for quantity variance. The item is designated as a critical application and must comply with stringent technical and quality standards referenced from the DLA Master List, including ISO 9001:2015 for quality management and MIL-STD-1916 or comparable zero-based sampling plans for inspection, with zero non-conformances required unless otherwise specified. The supplier must adhere to rigorous packaging directives including MIL-STD-2073-1E and MIL-STD-129 for marking, while also following Qinetiq Packaging Instruction 1210300059 and DLA packaging requirements. Item Unique Identification is not required per customer request, and government identification must be removed from non-accepted supplies. Cybersecurity Maturity Model Certification Level 2 self-assessment is mandatory, and hazardous materials shipping procedures must be followed per IP025. Shipping must occur via the fastest traceable means—parcel post is explicitly prohibited. The contract includes detailed inspection and acceptance at destination and specifies the responsible government point of contact as April Reed of the Department of Defense, with an original required delivery date of June 2, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
INSULATION, SUPPORT
Solicitation # SPE4A7-26-T-606D
The contract specifies the procurement of a commercial off-the-shelf (COTS) insulation and support item identified by part number 02250158-385 and NSN 1680-01-649-5646, with a quantity of one unit to be delivered within five days under the solicitation SPE4A7-26-T-606D. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and the item must be packaged in accordance with ASTM D3951 while strictly adhering to all applicable DLA Master List of Technical and Quality Requirements, including MIL-STD-129 for marking and labeling, and RP001 for packaging standards. Sampling requirements mandate compliance with MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. The item must be palletized per DLA requirements, labeled with the assigned unit of issue, and shipped via the fastest traceable means, explicitly prohibiting parcel post. The delivery address is Marine Aviation Logistics Squadron 14 at MCAS Cherry Point, North Carolina, with the original required delivery date set for March 4, 2026. All technical and quality provisions referenced in the DLA Master List take precedence over other standards, and the contract includes detailed shipping, identification, and government-only fields for logistics and tracking purposes.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
VALVE INLET SEAT
Solicitation # SPE4A5-26-T-318V
The contract pertains to the procurement of 13 valve inlet seats with NSN 1650-00-471-7681 and part number AC08822 supplied by Meggitt Aerospace Limited, under solicitation SPE4A5-26-T-318V. Delivery is required within 347 days of award, with FOB origin terms and inspection and acceptance occurring at the destination. The item is classified as a critical application item and must comply with all applicable DLA Master List of Technical and Quality Requirements, which override any conflicting specifications such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with configuration control enforced through engineering change proposal and variance procedures. Sampling inspections must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Cybersecurity requirements mandate a CMMC Level 2 self-assessment, and physical marking of the item is mandatory. The unit of issue is each (EA), with no variance permitted in quantity, and delivery must be made to the DLA Distribution facility in New Cumberland, Pennsylvania by July 24, 2027. All documentation and compliance obligations referenced in the DLA master list are binding and take precedence.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
YOKE, UNIVERSAL JOIN
Solicitation # SPE4A6-26-T-11FZ
The contract pertains to the procurement of four YOKE, UNIVERSAL JOIN units with NSN 1680-01-692-3584 under solicitation SPE4A6-26-T-11FZ, with a response deadline of August 10, 2026, and a delivery requirement of 848 days after delivery order issuance. Technical data for this item is not publicly available due to proprietary or insufficient documentation, limiting competitive procurement. The contract incorporates technical and quality requirements from the DLA Master List, with compliance tied to the revision in effect on the solicitation issue date. Source approval documentation is required, and the item is subject to Covered Defense Information and Cybersecurity Maturity Model Certification Level 2, necessitating certification by a C3PAO. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Government identification must be removed from non-accepted supplies, and bare item marking is required, though Item Unique Identification is waived per customer request. Technical data associated with this item is subject to ITAR or EAR export controls, and only contractors with approved JCP certification, completed DLA training, and explicit authorization may access it. The place of performance is Cherry Point, North Carolina, and inquiries should be directed to Zachary Gonzalez at the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
TAIL ROD
Solicitation # SPE7M2-26-T-5944
The contract pertains to the procurement of a TAIL ROD with NSN 1720-00-939-0093, quantity of 13 units, under solicitation SPE7M2-26-T-5944, with a response deadline of August 13, 2026, and delivery expected in 305 days after order award. The item is associated with technical data subject to strict export controls under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons, including foreign national employees and subsidiaries of U.S. companies, without prior authorization from the Department of State or Department of Commerce. Access to this controlled data is restricted exclusively to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have been formally approved by DLA. The place of performance is specified as New Cumberland, Pennsylvania, 17070-5002, and the contracting office operates under the Department of Defense’s Nuclear Reactor Program. Primary point of contact is Alisha Blanton, reachable via email and phone provided.
NUCLEAR REACTOR PROGRAM

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A7-26-T-605Y
This contract pertains to a government procurement under solicitation SPE4A7-26-T-605Y for 29 units of an item identified by NSN 0001S00000052, with a delivery deadline of 264 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless amended. The item is subject to export control regulations under either ITAR or EAR, restricting the disclosure of associated technical data to foreign persons wherever located, including foreign national employees and subsidiaries of U.S. companies. Compliance with DFARS 252.225-7048 is mandatory, and access to controlled data is limited to contractors with approved JCP certification, completed DOD export control training, and formal DLA authorization. Packaging must adhere to DLA standards, and configuration changes require an engineering change proposal or variance request. Inspection and acceptance occur at origin, and non-accepted supplies must have government identification removed. The place of performance is Jacksonville, FL, with Hannah Leonard as the primary point of contact, and the solicitation is open to federal entities under NAICS code 336413.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 333414
New
DIBBS
GRILLE, METAL
Solicitation # SPE4A5-26-T-319C
The contract pertains to the procurement of a metal grille identified by part number 439W3234-11D and NSN 1660017143102, with a quantity of two units to be delivered within 347 days. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and the item is classified as a critical application item for The Boeing Company. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, incorporating referenced standards such as MIL-STD-1916 and ASQ H1331 for sampling, with zero non-conformances required unless otherwise specified. Configuration change management, supply chain traceability per DLA Procurement Note C03, and FAA-specific marking and airworthiness requirements are mandatory, and the item must comply with DLA packaging standards including MIL-STD-2073-1E and MIL-STD-129 for marking. The contractor is required to retain supply chain documentation and adhere to FAA bare item marking rules, though unit identification is not required. Packaging must meet RP001 and RP003 standards, and palletization must follow DLA guidelines. The item is non-unique and not subject to DoD unique item identification. The delivery destination is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, and the original required delivery date is July 24, 2027. Price per unit is set at $2.00, totaling $4.00 with no variance allowed in quantity.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
BOOT, DUST AND MOIST
Solicitation # SPE4A5-26-T-319A
The contract pertains to the procurement of three units of BOOT, DUST AND MOIST with NSN 5340016807502 and part number 209-001-146-101, under solicitation SPE4A5-26-T-319A, with delivery required within 657 days from the contract date and a firm delivery deadline of May 29, 2028. Items must be delivered FOB origin with zero variance in quantity and inspected and accepted at the destination. Packaging must comply with DLA’s standardized requirements, including MIL-STD-129 for marking and labeling, and adherence to RP001 for palletization, overriding any commercial standards like ASTM D3951. If classified as hazardous per FED-STD-313, packaging must meet TQ requirement IP025; otherwise, commercial packaging is acceptable only if it meets DLA’s superior technical and quality requirements referenced from the DLA Master List. Unit of issue is each (EA), and no Item Unique Identification is required as per customer request. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances expected unless otherwise specified, with attribute classifications mandating strict verification levels. Configuration changes require formal engineering change proposals or variance requests, and all government identification must be removed from non-accepted supplies. Delivery is directed to the DLA Distribution facility in New Cumberland, PA, with transportation governed by DLAD proc notes C19 and C20.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE4A5-26-T-318B
The contract is for a single electrical plug connector, identified by part number BACC63BP12H3SN and NSN 5935-01-607-4886, with a unit of issue of Each (EA), effective February 1, 2026. The requirement stems from a solicitation issued by the Department of Defense under reference SPE4A5-26-T-318B and is managed by the ASC Supplier Operations OEM Division. Delivery is due within 20 days of contract award, with FOB Origin terms and inspection and acceptance occurring at the destination. The item must comply with DLA packaging standards MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking applied. Unit packaging is configured for bulk shipping in a single container with no cushioning or dunnage, and palletization must adhere to DLA-specific packaging guidelines. The item is to be shipped via traceable freight, explicitly excluding parcel post, to the naval air station in Oak Harbor, Washington. Quality assurance requires strict adherence to MIL-STD-1916 or equivalent zero-defect sampling plans, with specified verification levels for critical, major, and minor attributes. Manufacturers must be certified under ISO 9001:2015 and comply with DLA’s technical and quality requirements referenced via R-numbers in the DLA Master List. Government identification must be removed from non-accepted supplies, and measuring and test equipment used in production must be calibrated per RT001. Item Unique Identification is not required per the Service customer’s request. The purchase request number is 7017607376, with a total price of $1.00 for one unit and an original required delivery date of July 22, 2026.
Electronic Connector Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
WASHER, KEY
Solicitation # SPE4A5-26-T-318F
The contract pertains to the procurement of 166 units of a washer, key, identified by NSN 5310013632832 and part number 4903T22P01, sourced under Solicitation SPE4A5-26-T-318F. Delivery is required within 20 days from contract award, with FOB origin terms and no tolerance for quantity variance — exactly 166 units must be delivered. Inspection and acceptance are both to occur at the origin, with packaging required to comply with MIL-STD-2073-1E and marking aligned with MIL-STD-129, including no special marking code. The product is classified as a critical application item, subject to stringent quality controls outlined in DLA’s master technical and quality requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance unless otherwise specified. Configuration changes must follow formal engineering change procedures, and non-accepted supplies must have government identification removed per contract stipulations. The item is to be delivered to the Turkish military facility in Eskisehir, with freight handled by A.J. Worldwide Services, and the consignee is the 1st Air Maintenance Factory Directorate. Packaging must meet DLA’s packaging requirements, including unit containment as BD, intermediate container E5, and packing level B. The contract is under the Department of Defense, managed by the ASC Supplier Oper OEM Division, with Steven Lewis listed as the primary point of contact. The solicitation was posted in August 2026 with a response deadline the same month, and the original required delivery date is January 22, 2026. All materials must adhere to the DoD’s authorized unit of issue and relevant ANSI X12 standards, with full technical and quality provisions referenced through DLA’s official master list of technical and quality requirements.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336330
New
DIBBS
HUB, WHEEL, VEHICULAR
Solicitation # SPE4A5-26-T-318Y
The contract pertains to the procurement of three vehicular hub and wheel units with NSN 2530-01-686-5163 and part number 70250-12701-102 under solicitation SPE4A5-26-T-318Y. The delivery is required within 588 days from the contract date with a firm delivery deadline of March 21, 2028, and the items must be shipped FOB origin. The quantity is strictly fixed at three units with zero variance allowed. Inspection and acceptance occur at the destination warehouse located at Tracy, California. All packaging must adhere to DLA’s Master List of Technical and Quality Requirements, with specific directives for hazardous and nonhazardous materials: hazardous items must conform to FED-STD-313 and TQ requirement IP025, while nonhazardous items must follow ASTM D3951 unless superseded by higher-priority DLA standards. Packaging and labeling must comply with MIL-STD-129 and palletization must meet RP001 DLA packaging requirements. The Unit of Issue is each unit, with a contract price of $3.00 per unit, totaling $9.00. The shipping address and parcel post address are identical, directing delivery to DLA District San Joaquin, Rec Whse 57, Tracy, CA. Transportation procedures are governed by DLAD Proc Notes C19 and C20. The contract was issued under a federal acquisition framework, categorized under NAICS code 336330, with primary point of contact Stephanie Hewlett from the Department of Defense’s ASC Supplier Oper OEM Division.
Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 325110
New
DIBBS
CLEANING COMPOUND, SOLV
Solicitation # SPE4A5-26-T-318G
The contract is for the procurement of a commercial off-the-shelf cleaning compound, solvent, identified by NSN 6850-01-682-3375 and part number 801-1500-157, supplied by Highland Engineering, Inc., with a CAGE code of 0AK83. The unit of issue is a container (CO), with each container holding 2.0 gallons, and the total quantity ordered is three containers. Delivery is required FOB destination within 202 days, with a required ship date of March 1, 2027, and no variance in quantity is permitted. Inspection and acceptance occur at the destination, with packaging strictly governed by MIL-STD-2073-1E and marking required in accordance with MIL-STD-129, including the special marking code ZZ for additional requirements. Palletization must comply with DLA packaging standards, and the material has no shelf life restriction. The product is classified as a hazardous material, mandating full compliance with OSHA's revised Hazard Communication Standard and the Globally Harmonized System of Classification and Labeling of Chemicals. Suppliers must submit GHS-compliant Safety Data Sheets (SDS) and approved product labels for review and approval by technical personnel prior to contract award, and copies must be filed with DLA Aviation HMIRS. Employee training on SDS, labeling, and 29 CFR 1910.1200 requirements is mandatory. Sampling is governed by MIL-STD-1916 or ASQ H1331, with zero tolerance for non-conformances unless otherwise specified. The delivery address is the DLA Distribution San Joaquin warehouse in Tracy, California, and all transportation must adhere to DLAD Proc Note C19 for general shipping and C20 for first destination routing.
Petrochemical Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
CHAIN ASSEMBLY, SING
Solicitation # SPE4A5-26-T-318U
The contract is for the procurement of two units of a chain assembly, singular, identified by NSN 4010-01-630-3113 and part number 00933-1, manufactured by Tru-Hitch, Inc. The total quantity is two units, priced at $2.00 per unit, with delivery required within 121 days from the contract date, FOB origin. All items must be configured to a precise dimension of 7 x 7 x 7 inches and packaged in accordance with MIL-STD-2073-1E, including specific preservation methods, wrapping, and packaging codes. Marking must strictly follow MIL-STD-129 with no special marking required. Palletization and packaging must comply with DLA’s official packaging requirements. Delivery is to be made to the DLA Distribution facility in New Cumberland, Pennsylvania, with both inspection and acceptance occurring at the destination. Sampling and quality verification are governed by MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required in the sample unless otherwise stated, and attribute classifications must align with predefined verification levels or AQLs. Technical and quality requirements referenced through R or I numbers are sourced from the DLA Master List of Technical and Quality Requirements, and compliance is mandatory. The solicitation number is SPE4A5-26-T-318U, issued August 2, 2026, with a response deadline of August 10, 2026, under a federal acquisition framework with NAICS code 332618. The primary point of contact is Hien-Van Trinh of the Department of Defense’s ASC Supplier Oper OEM Division.
Other Fabricated Wire Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334513
New
DIBBS
TRANSDUCER, MOTIONAL
Solicitation # SPE4A5-26-T-318Z
This contract, issued under solicitation SPE4A5-26-T-318Z, procures 15 units of a motional transducer pickup with NSN 6695-00-972-3242 from CEC VIBRATION PRODUCTS, LLC, part number 4-103-0001. All requirements are governed by the DLA Master List of Technical and Quality Requirements, with adherence to MIL-STD-1916 or ASQ H1331 for sampling unless otherwise stated, and zero non-conformances are required in sampled lots unless specified otherwise. Configuration changes require formal engineering change proposals, and deviations or waivers must be formally requested. The item is classified as a critical application product and must be physically identified per RQ017 standards. The product must comply with MIL-STD-2073-1E packaging specifications, including packing code Q, packaging level B, and marking per MIL-STD-129 with no special marking code. Palletization follows DLA packaging requirements, and delivery is FOB origin within 20 days of contract award, with no tolerance for quantity variance. The delivery destination is the Parts-Attach General Depot in Tainan City, Taiwan, with the required delivery date set for August 4, 2026. The contract is a total small business set-aside under NAICS code 334513, and all performance and compliance obligations are subject to verification at origin. Government use codes and administrative data are appended for internal tracking and logistics coordination.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 314994
New
DIBBS
LINK, CHAIN, CONNECTING
Solicitation # SPE4A5-26-T-319H
This contract pertains to the procurement of one unit of a connecting chain, identified by NSN 4010-01-590-4131 and purchase request 7017659279, under solicitation SPE4A5-26-T-319H. Delivery is required within 20 days of award, with shipment FOB origin and inspection and acceptance occurring at the destination. Packaging must strictly comply with MIL-STD-2073-1E and DLA packaging requirements, with marking adhering to MIL-STD-129 and no special marking codes applied. Palletization follows DLA standards, and the item must be shipped by the fastest traceable means, explicitly prohibiting parcel post. The delivery address is COMNAVAIRLANT SWWP EQOL HAB in Norfolk, Virginia, with specific container and handling instructions including E5 unit containers and dry preservative methods. The contract mandates zero non-conformances in sampling under MIL-STD-1916 or equivalent zero-based plans, with attribute classifications assigned specific verification levels and AQLs. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and government identification must be removed from non-accepted supplies. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size. The item is to be delivered to the government with no variance permitted in quantity, and the original required delivery date is July 27, 2026.
Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
THERMOMETER, SELF-INDIC
Solicitation # SPE4A5-26-T-319P
The contract is for the procurement of three self-indicating bimetallic thermometers under NSN 6685-01-417-6054, sourced from Moeller Instrument Company, Inc. with part number ITD32404-S, delivered FOB origin with a strict 170-day delivery window ending February 28, 2027. The item is designated as a critical application item and must comply with stringent packaging and marking standards including MIL-STD-2073-1E and MIL-STD-129, with special labeling indicating it as a delicate instrument. No quantity variance is permitted, and inspection and acceptance occur at the destination, with packaging required to meet DLA’s procurement guidelines and prohibit any mercury-containing substances in preservation, packaging, or marking. Sampling and quality verification follow zero-defect standards under MIL-STD-1916 or comparable plans, with critical attributes held to an AQL of 0.1 and mandatory verification at Level VII. Mercury and mercury compounds are strictly banned unless used in functional exemptions such as batteries or sensors, and any such exempt items must include secondary containment per NAVSEA 5100-003D. The contract references DLA’s master list of technical and quality requirements and mandates compliance with all incorporated technical and quality provisions identified by R or I numbers. Delivery must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, under freight transport protocols outlined in DLAD Proc Note C19 and C20.
Other Measuring and Controlling Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details