This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on July 28, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Court Reporter Equipment

Closed

W912JB26QA079Federal

Submission Closed08/19/2026, 04:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334310

New

Federal

Giant Voice System Hardware Supply

POSTED

DEADLINE

PKA-Giant Voice Equipment -6 CS (Amendment 6)

Solicitation # FA481426Q0072

The 6th Communications Squadron at MacDill Air Force Base in Tampa, Florida, is seeking a contractor to engineer, design, furnish, install, and test a new non-proprietary turn-key Giant Voice (GV) system to replace the existing infrastructure. The fully integrated system must deliver real-time intelligible voice messages, tone alerts, and music across all areas of the base, incorporating three Central Control Stations, four Client Workstations, and thirteen Remote Siren Stations with NEMA-4X rated enclosures, Class D audio amplifiers, battery chargers, solar panels, radio base stations, and lightning protection. The solution must integrate with the current AtHoc system and communicate over digital two-way UHF radio links while complying with military and commercial standards including NECs, NFPA 70, UFC 3-520-01, and RUS Bulletin 1753F-201. All equipment must be capable of withstanding Category 3 hurricane wind loads, and the contractor is responsible for the complete removal and off-base disposal of existing infrastructure in accordance with federal, state, and base environmental regulations. The project requires full coordination with the base Point of Contact for staging, storage, and laydown areas, and the contractor must restore all Government-furnished spaces to their original condition upon completion. The solicitation, identified as FA481426Q0072, is a Total Small Business Set-Aside under NAICS Code 334310, with a lowest price technically acceptable (LPTA) award methodology. Proposals must be submitted via email to two designated points of contact by 1000 EST on June 4, 2026, and must include full pricing for the entire requirement or be rejected as non-responsive. Technical acceptability, responsibility via the Supplier Performance Risk System (SPRS), and compliance with all FAR clauses—including prohibitions on covered telecommunications equipment, whistleblower rights, sustainable products, subcontracting controls, and electronic parts sourcing—are mandatory. Offerors must maintain an active SAM registration, provide valid UEI and CAGE codes, and submit completed certifications including those related to foreign ownership, labor compliance, and prohibited procurement regions such as Xinjiang. The contractor must assign a prime contractor employee as a single point of contact from award through final acceptance, ensure all personnel have at least a favorable National Agency Check, adhere to AFI 91-202 safety standards, and comply with daily site cleanup and incident

POSTED

DEADLINE

Audio and Video Equipment for HPL

Solicitation # INF-2026-0380

The City of Houston is soliciting bids for the purchase of audio and video equipment for the Houston Public Library, specifically requesting a Brother Entrepreneur W PR680W 6-Needle Embroidery Machine with a PRNSTD2 stand. The total price for the procurement must not exceed 25,000 dollars. Bidders must provide the specified brand or an approved equal and provide a minimum one year guarantee on all materials and workmanship from the date of full acceptance. The contract must be completed within 30 calendar days from the notice to proceed, with all work performed during normal business hours and delivered FOB destination. The City intends to award the contract based on the overall low net bid that meets all specifications, though it reserves the right to award based on individual items, combinations of items, or the overall best bid. To be eligible, vendors must be determined responsive and responsible, possessing the necessary integrity, reliability, and financial and technical capacity. Required submission documents include the Official Signature Page and certifications regarding equal opportunity employment, non-collusion, and compliance with Texas Government Code regarding boycotts of Israel, energy companies, and firearm entities, as well as certifications against doing business with foreign terrorist organizations. Payment is due 30 days after the City approves the invoice or accepts the goods, whichever occurs later.

POSTED

DEADLINE

Commercial-Grade UHD Televisions

POSTED

DEADLINE

Commercial-Grade Outdoor Display Supply

W7M4 Uspfo Activity Hiang 154

POSTED

DEADLINE

FY26 USAFA DF/DFT Projectors and Soundbars

Solicitation # FA700026Q0110

Solicitation FA700026Q0110 is a Firm-Fixed-Price request for quote issued by the United States Air Force Academy (USAFA) Dean of Faculty Technology Office for the procurement, professional installation, and disposal of audiovisual equipment. The project requires the purchase of 285 Epson BrightLink 1485Fi Interactive Projectors and 249 AVerMedia GS68-C Soundbars to be installed across 243 classrooms in Buildings 2354 and 2355. The scope of work includes turn-key installation, electrical outlet installation compliant with local building codes, and the removal and haul-away of 270 legacy projectors to the Defense Reutilization and Marketing Office (DRMO) at Fort Carson, Colorado. The estimated contract value is between 850,000 and 950,000 dollars, with hardware delivery required by October 14, 2026, and installation services performed between October 15, 2026, and January 12, 2027. This acquisition is set aside for small business concerns and utilizes a phased evaluation methodology to determine the best value based on price, past performance, and technical capability. Technical acceptability is based on full compliance with the Statement of Work and adherence to supply chain security and FASCSA requirements. The government will initially rank quotes by price and evaluate the three lowest-priced offers for technical and past performance suitability. Key administrative requirements include the submission of a Trade Agreements Act certification, the use of the Wide Area WorkFlow system for invoicing, and the provision of Unique Item Identifiers for high-value equipment. All shipments are FOB Destination to the USAF Academy in Colorado.

POSTED

DEADLINE

FORT RILEY - CHAPEL AUDIO VISUAL EQUIPMENT UPGRADE W911RX26QA076-0001

Solicitation # W911RX26QA076

Solicitation W911RX26QA076 is a firm-fixed-price purchase order 100% set aside for small businesses under NAICS 334310. The project involves the commercial procurement, installation, and system-wide integration of upgraded audio-visual components at Kapaun Chapel, St. Mary's Chapel, and Morris Hill Chapel at Fort Riley, Kansas. The scope of work includes furnishing digital audio mixing consoles, power amplifiers, and wireless microphone systems, with a brand-name requirement for Yamaha digital mixing consoles and stage boxes to ensure interoperability. Specific requirements for Kapaun Chapel include a high-output solid-state laser projection system with at least 9,000 ANSI lumens and a corresponding projection screen. The contractor is also responsible for relocating a government-owned Yamaha TF3 mixing console from St. Mary's to Morris Hill Chapel and installing plenum-rated, structured cabling. The contract requires the delivery of all uncompiled editable control programming files and administrative passwords to prevent proprietary lock-in, as well as professional acoustic calibration and four hours of on-site user training. All work must adhere to AVIXA standards, the National Electrical Code, and local building codes. The period of performance concludes on December 30, 2026, with invoicing processed through the Wide Area WorkFlow system. Offers are due by 12:00 PM CDT on September 18, 2026, and must include a signed copy of SF30 for amendment 0001.

POSTED

DEADLINE

AV Courtroom 3.100 - US District Court for the District of Utah

Solicitation # SO1_26_0003

The U.S. District Court for the District of Utah is soliciting firm-fixed price bids for audio-visual installation services in Courtroom 3.100 in Salt Lake City. The project involves the installation of voice and media reinforcement, tele-conferencing, assisted listening, and language interpretation systems, as well as the necessary infrastructure including equipment racks and supports. The scope includes the installation of specific hardware such as microphones, DSPs, amplifiers, and AV-over-IP encoders, with a preference for brands like Shure, Biamp, and Extron. Vendors may propose non-brand offerings but must provide detailed specifications demonstrating that the alternatives meet the requirements listed in Schedule B. The contract will be awarded to the lowest priced, technically acceptable offer, with the total evaluation price including both the base requirement and Option 1 for video conferencing. The period of performance is 12 months from the date of award, and delivery is desired within 100 days of the offer receipt. Key requirements include strict adherence to labeling standards, where all cables must be marked at both ends and control panels must be permanently engraved in metal. Acceptance is contingent upon rigorous testing for audio distortion, hum and noise levels, and visual image quality, as well as compliance with NFPA 70 and EIA standards. Proposals are due by September 18, 2026, and must include a detailed pricing spreadsheet, manufacturer specification sheets for any substitutions, and a restatement of the scope of work.

POSTED

DEADLINE

SUP Television Monitors, JBPHH-HI

Solicitation # W50SLF26QA023

Solicitation W50SLF26QA023 is a request for a firm-fixed-price contract to procure and install a complete outdoor television monitor notification system for the 199 FS at Hickam AFB, Hawaii. The requirement consists of three commercial-grade, weather-resistant 75-inch 4K outdoor LCD displays, such as the Samsung QM75C or equivalent, along with Crestron DM-NVX-D360 network AV encoders and decoders or equivalent. The scope of work includes all necessary mounting hardware, cabling, shipping, professional installation, and integration services, with a final delivery and completion deadline of September 30, 2026. This procurement is a 100% Small Business Set-Aside under NAICS 334310, Audio and Video Equipment Manufacturing. The government will evaluate offers based on the lowest price from a responsible quoter whose proposal meets the salient physical and performance characteristics. Quotes are due by September 14, 2026, at 10:00 AM Hawaii Standard Time. All interested parties must be registered in the System for Award Management and use the Wide Area WorkFlow system for electronic invoicing. The contract also mandates compliance with MIL-STD-130 and MIL-STD-129 for item identification and marking, as well as adherence to the Service Contract Act wage determinations for Hawaii.

W7M4 Uspfo Activity Hiang 154

POSTED

DEADLINE

Solicitation # W911S226U4476

POSTED

DEADLINE

Solicitation # SPE7M1-26-U-6085

Solicitation SPE7M1-26-U-6085 is a request for quotations issued by the Department of Defense Maritime Supply Chain for the procurement of handsets, identified by NSN 5965016752935. This procurement may result in a unilateral Indefinite Delivery Contract with a one-year term or until the aggregate total of orders reaches a maximum value of 350,000.00 dollars. The initial requirement consists of two units with a delivery period of 83 days after the order is placed. Items are to be shipped FOB Origin to various CONUS and OCONUS DLA Depots, with inspection and acceptance occurring at the destination. The award will be based on the price quoted for the estimated annual demand, and the procurement is a candidate for automated award provided that the offeror does not quote used or remanufactured items and maintains a quote validity period of at least 90 days. Packaging must adhere to MIL-STD-2073-1E and RP001, while marking must comply with MIL-STD-129. Invoicing and payment are to be processed electronically through the Wide Area WorkFlow system. Offerors must comply with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 regarding the safeguarding of covered defense information. All quotes must be submitted electronically by the deadline of September 25, 2026.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # W911S226U3988

Solicitation W911S226U3988 is a Request for Quotation issued by the Department of Defense, specifically the W6QM Micc-Ft Drum, for the procurement of professional camera equipment and accessories. This acquisition is a Total Small Business Set-Aside under NAICS code 334310. The required equipment includes Canon EOS R6 Mark III mirrorless cameras, Speedlite EL-10 flashes, B+W XS-Pro Digital ND Vario MRC-Nano filters, and SanDisk 512GB Extreme PRO CFexpress Type B memory cards. The procurement is designated as brand name or equal, meaning alternative products must meet the specified salient characteristics, such as the 32.5MP full-frame CMOS sensor and 8.5-stop S-axis image stabilization for the camera. The contract will be awarded to the responsible offeror whose proposal is determined to be most advantageous to the government, based on an evaluation of price and technical factors. All equipment must be new, as used or remanufactured products are prohibited. Quotes must be submitted exclusively through the PIEE Solicitation module, and offerors are required to provide a completed certification of the country of origin via Attachment 1. Shipping must be quoted as F.O.B. destination, with a preferred delivery timeframe of 30 days. The solicitation incorporates various FAR and DFARS clauses, including the Buy American-Supplies and the Balance of Payments Program Certificate.

W6QM Micc-Ft Drum

POSTED

1 day ago

DEADLINE

in 6 days

AI Contract Overview

This solicitation seeks a single small business to supply one package of court recording equipment under a firm-fixed-price contract, strictly set aside for small businesses meeting the 750-employee size standard in NAICS 334310. The equipment must comply with detailed technical specifications outlined in Attachment A, and proposals must demonstrate a clear understanding of requirements through a technical capability section that includes descriptions and supporting images, without simply restating the requirements. Pricing must be submitted in alignment with the single CLIN structure, with total extended prices clearly stated and valid for a minimum of 60 days after submission. All offers require active SAM.gov registration, including UEI and CAGE codes, tax identification, and full company contact details, and must be submitted in Microsoft 365 or PDF format without password protection or external links. Compliance with NIST SP 800-171 security controls is mandatory, requiring a current self-assessment in SPRS, no older than three years. Delivery is required within 60 days of award to the USPFO S&S Receiving facility in Lansing, Michigan, with shipping, handling, and insurance costs included in the quoted price. Evaluation will consider technical approach, past performance, and price as equal factors, with award going to the offeror providing best value, not necessarily the lowest price. Invoices must be submitted via Wide Area Work Flow after delivery, are subject to Net 30 payment terms, and will be inspected and accepted at the delivery location. Quotes are due by 12:30 p.m. EDT on August 19, 2026, to two specified email addresses, and must include a formal statement of acknowledgement that all terms and conditions have been read and accepted.

General Info

Small business to supply court recording equipment per specs, deliver in 60 days, comply with security rules, best value award.

Agency

Department Of Defense → W7NF Uspfo Activity Mi ArngView Agency

NAICS

334310 - Audio and Video Equipment ManufacturingView NAICS

Place of Performance

Lansing, MI, 48906, USA

Set-Aside

SBA

Documents

(2)

Solicitation Provisions and Clauses - FAR 52.212-1 Instructions to Offerors

PDF•provisions-and-clauses

Product Description - Court Reporter Recorder Package Specifications

PDF•specifications

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJul 28

Combined Synopsis

Response DeadlineAug 19

Deadline has passed

Submission Closed

08/19/2026, 04:30:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → W7NF Uspfo Activity Mi Arng

Contacts2 people available

OfficeLANSING, MI, 48906-2934, USA

Organization / Agency

Department Of Defense → W7NF Uspfo Activity Mi Arng

View Agency Profile

Office AddressLANSING, MI, 48906-2934, USA

Contacts

Bonnie Reineer

contact@example.gov

Olayemi O. Olatunji

contact@example.gov

Full Description

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR subpart 12.6, FAR 13 and supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.

1.0 REQUEST FOR QUOTE

1.1 The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2026-18.

1.2 Set aside is 100% Small Business.

1.3 Applicable size standard is 750 employees.

1.4 NAICS: 334310 Audio and Video Equipment Manufacturing

1.4 PSC: 5835 Sound Recording and Reproducing Equipment

1.5 Place of delivery: Michigan National Guard, USPFO S&S Receiving, 3405 N MLK JR BLVD, Lansing Michigan 48906.

1.5.1 Delivery shall be 60 after award.

1.6 Contract Line Item Structure (CLIN):

1.6.1 0001 1 package of Court Recording Equipment

1.6.1 Refer to the salient characteristics listed on Attachment A – Product Description.

1.8 Applicable clauses are provided on Attachment B – Provisions and Clauses.

2.0 QUOTE FORMAT

2.1 The offeror is expected to ensure compliance with all laws, regulations, standards, and any other constraints specifically identified in the solicitation. A statement of acknowledgement must be included in the quote to conform with all terms, conditions, provisions and clauses in the solicitation.

2.2 Company information shall include from sam.gov entity registration the

2.2.1 name and address (include ‘doing business as’ (dba) name),

2.2.2 point of contact information (name, email and phone number),

2.2.3 UEI and CAGE codes

2.2.4 Tax identification number

2.3 The acceptable electronic format shall be compatible with Microsoft 365 or PDF Adobe.

2.4 All documents shall be labeled with the solicitation number (W912JB26QA053) and not be password protected.

2.5 The offeror should assume the Government has no prior knowledge of its capabilities and experience. The Government will base its evaluation on the information presented in the offeror’s quote.

3.0 VOLUME 1 - TECHNICAL CAPABILITY

3.1 The proposal shall present relevant information articulating the offeror’s proposed approach to meeting the product description requirements. This section shall clearly demonstrate the offeror’s understanding by providing a clear description of the proposed approach to meeting the requirements. The offeror shall provide descriptions and images if possible.

3.2 The offeror shall not rephrase or restate the requirements but shall provide convincing rationale to address how the offeror intends to meet those requirements.

3.3 Past performance of relevant acquisitions may be included as an example of how the requirements have been previously purchased.

3.4 Provide a brief description of the item(s) purchased with any details comparable to the product requirements.

3.5 Technical capability and past performance will be used for evaluation.

4.0 VOLUME 2 - PRICING

4.1 Pricing shall be submitted in relation to the solicitation’s CLIN structure. The total extended price shall be submitted for the quote. Quotes without the extended price may be rendered unacceptable.

4.2 The offeror shall prominently list the expiration date of the pricing for a minimum of 60 days.

5.0 SAM REGISTRATION/JOINT VENTURE

5.1 The offeror must have an active registration on sam.gov at the time of award.

5.1.1 The registration must be active throughout the period of performance to be able to submit an invoice in WAWF.

5.2 In accordance with Class Deviation 2023-O0001 effective October 28, 2022, a small business joint venture offeror must submit, with its offer, the representation required in paragraph (c) of FAR solicitation provision 52.212-3, Offeror Representations and Certifications-Commercial Products and Commercial Services, and paragraph (c) of FAR solicitation provision 52.219-1, Small Business Program Representations, in accordance with 52.204-8(d) and 52.212-3(b) for the following categories: A) Small business; (B) Service-disabled veteran-owned small business; (C) Women-owned small business (WOSB) under the WOSB Program; (D) Economically disadvantaged women-owned small business under the WOSB Program; or (E) Historically underutilized business zone small business.

6.0 NIST COMPLIANCE

6.1 in accordance with DFARS 252.204-7020, the contractor shall submit a self-assessment on safeguarding covered defense information that resides in or transits through covered contractor information systems by applying network security requirements.

6.2 National Institute of Standards and Technology (NIST) Special Publication (SP) 800-171 provides 110 controls that the contractor shall self-evaluate to determine compliance.

6.3 Assessment to be submitted on Procurement Integrated Enterprise Environment (PIEE) to login to the Supplier Performance Risk System (SPRS) module prior to submitting a quote.

6.4 The assessment shall be no more than three years since reporting.

7.0 EVALUATION

7.1 The Government intends to award a single small business that provides the best value to the Government which meets all the technical specifications and provisions listed in this RFQ.

7.2 Best value will be determined by evaluating price, past performance, and technical approach. Technical capability will be established by evaluating the experience the contractor has with relevant and similar contracts. Technical approach and technical capability will be evaluated as acceptable or unacceptable. All factors are rated approximately equal.

7.3 The government intends to award to the responsible contractor whose quote, conforming to the solicitation, is most advantageous to the government based on price and other factors that provide the best value.

7.4 The government may award to other than the lowest priced quote if the factors of technical capability and technical approach provide the best value and exhibit betterments above the minimum requirements identified in the RFQ.

7.5 Negative or adverse information on FAPIIS or SPRS in the last three years may render your quote unacceptable.

8.0 AWARD

8.1 In accordance with FAR 12.207, a firm-fixed contract shall be issued.

8.2 Delivery date shall be 60 days after award.

8.3 Delivery will be to the USPFO S&S Warehouse, 3405 N MLK JR. BLVD, Lansing MI 48906.

8.3.1 multi-bay loading dock easily accessible to semi-trucks or commercial equipment haulers

8.3.2 normal hours of operation are 8:00 a.m. to 4:30 p.m. weekdays unless a federal holiday. Alternate delivery hours may be available upon request.

8.4 Cost of shipping, handling and insurance must be included in the price.

8.5 A notice will be sent to the unsuccessful offerors when a signed contract has been received from the apparent awardee.

9.0 BILLING INSTRUCTIONS

9.1 Invoice terms are Net 30 days.

9.2 Invoices must be for services performed. Invoices will not be accepted for billing future services during the period of performance.

9.3 Inspection and acceptance will be at Lansing, Michigan.

9.4 Quantity for services corresponds to the number of invoices to be submitted per month during the time of performance.

9.5 Invoices must be submitted through Wide Area Work Flow (https://piee.eb.mil).

9.5.1 Instructions are on clause 252.232-7006.

9.5.2 The invoiced amount for the CLIN shall not exceed the unit of issue amount.

9.5.3 Invoices shall be submitted after the supply has been delivered.

9.5.4 The invoice acceptor has seven days to inspect the submitted invoice, and seven days to accept or reject the invoice. Once accepted, the request is submitted to the USPFO Pay Office for processing; when approved, the request is sent to DFAS for EDI transmission to the contractor.

10.0 QUOTE SUBMISSION INSTRUCTIONS

10.1 Questions due: 12 August 2026, 12:30 pm Eastern Standard Time (EDT).

Questions must be submitted via email to bonnie.l.reineer.civ@army.mil. Questions will not be answered via telephone.

10.2 The quote shall not contain citations or active links to internet pages. Any linked information will not be accepted and removed from the quote.

10.3 It is the offeror’s responsibility to ensure all required documentation is provided in its entirety before the date and time set for closing of the solicitation.

10.4.1 Statement of Acknowledgement

10.4.2 Volume I – Technical Capability to include images

10.4.3 Volume 2 – Pricing

10.4.4 SF30 signed if the solicitation is amended

10.5 Quotes due: 19 August 2026 – 12:30 p.m. Eastern Daylight Time (EDT)

10.5.1 Quotes must be submitted electronically to bonnie.l.reineer.civ@army.mil and ng.mi.miarng.mbx.uspfo-pc-vendors@army.mil.

10.5.2 An acknowledgement will be sent when the quote is received.

10.5.3 If the email isn’t received, the contractor shall contact the administrator.

10.6 The Government reserves the right to require minor clarifications or to hold discussions. However, the Government may award without requesting clarification for ambiguity.