Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Cybersecurity Compliance and Reporting Services

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks services to implement and document cybersecurity controls aligned with NIST SP 800-171 for systems that handle covered defense information, ensuring full compliance with federal requirements for protecting sensitive data. The work includes configuring, testing, and validating technical and procedural safeguards across all applicable systems, as well as establishing and maintaining incident reporting mechanisms that meet federal standards for timely detection, response, and notification of cybersecurity events. All activities must be thoroughly documented to support audits and attestations, with emphasis on accuracy, traceability, and ongoing operational readiness. This subcontract is issued by the Department of Defense under the ASC SUPPLIER OPER OEM DIVISION, with performance required at a designated location in New Cumberland, Pennsylvania, 17070-5002. The solicitation falls under NAICS code 541612 for computer systems design services and is open for responses until July 28, 2026. The contractor must possess the technical expertise and experience to support DoD cybersecurity obligations, including familiarity with the NIST framework and the ability to integrate controls into existing infrastructure while maintaining system functionality and data integrity. Compliance is non-negotiable, and failure to meet requirements may result in contract termination or penalties.

General Info

Implement NIST SP 800-171 cybersecurity controls for DoD systems in New Cumberland, PA, ensuring compliance and incident reporting.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

541612 - Human Resources Consulting ServicesView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Implementation and documentation of NIST SP 800-171 cybersecurity controls and incident reporting for systems handling covered defense information.

Similar Contracts

Same NAICS industry code

NAICS: 541612
New
SLED
Employee Assistance Program ProviderThe Port of Seattle’s Employee Assistance Program is a comprehensive wellness initiative designed to support employees and their families through confidential, 24/7 access to assessment, counseling, and referral services. The program addresses a wide range of personal and professional needs including lifestyle and daily living resources, family support, crisis intervention, and financial or legal assistance, all delivered via phone or an online portal. Services are available not only at the employee’s request but also when coordinated by Human Resources to ensure timely and effective support, reinforcing a culture of care and resilience across the organization. As a core component of the Port’s Total Rewards Package, the program plays a vital role in attracting and retaining talented individuals critical to advancing the agency’s mission and achieving its Century Agenda goal of becoming a highly effective public institution. By promoting employee wellbeing and engagement, the EAP enhances workforce stability and operational effectiveness. The solicitation for an EAP provider is led by the Port’s Human Resources department with primary contact information available through Mazarine Ebengho Kyalumba and Project Manager Kecia Reichstein, and the procurement is categorized under NAICS code 541612, reflecting its alignment with management consulting services focused on human resources support.
Human Resources

POSTED

about 3 hours ago

DEADLINE

N/A
View Details
NAICS: 541612
New
DIBBS
Cybersecurity Compliance for Third-Party AssessorsThe contract seeks qualified third-party assessors to conduct or support Cybersecurity Maturity Model Certification (CMMC) Level 2 assessments for organizations within the defense supply chain that handle controlled unclassified information. These assessments are critical for ensuring compliance with Department of Defense cybersecurity requirements and validating that contractors implement appropriate safeguards to protect sensitive data. The work is tied to a subcontracting opportunity under the ASC Commodities Division of the Department of Defense, with performance required at a designated location in Mechanicsburg, Pennsylvania, 17050-2411. Assessments must align with CMMC Level 2 standards, which encompass a comprehensive set of security practices and processes designed to mitigate cyber threats targeting information systems in the defense industrial base. Interested parties must submit responses by the deadline of July 28, 2026, with the solicitation posted on July 20, 2026. The North American Industry Classification System code 541612 identifies this as an information technology consulting service, indicating the need for specialized technical expertise in cybersecurity evaluation and compliance auditing. This opportunity does not specify a set-aside designation, so all eligible entities may respond, though the nature of the work demands proven experience in CMMC assessments and familiarity with defense-sector security protocols. The requirement will be managed through the DIBBS platform, and proposers are expected to demonstrate capability in performing objective, accredited evaluations across multiple subcontractor environments within the defense supply chain.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 541612
New
DIBBS
Cybersecurity Compliance (CMMC Level 2 Assessment Support)This contract provides third-party support to achieve Cybersecurity Maturity Model Certification (CMMC) Level 2 compliance for a Department of Defense contractor, focusing on guidance through the full certification process. The scope includes conducting a detailed gap analysis to identify current cybersecurity deficiencies relative to CMMC Level 2 requirements, developing and organizing the necessary documentation to demonstrate compliance, and coordinating directly with an accredited C3PAO to facilitate the official assessment. The support is tailored to ensure the contractor meets all technical and procedural criteria under the CMMC framework without internal expertise to manage the complexity of the certification process. The work is being performed under a subcontract tied to the Defense Logistics Agency within the Department of Defense and is categorized under NAICS code 541612, which corresponds to management consulting services. The solicitation was posted in July 2026, suggesting a forward-looking procurement aimed at preparing for upcoming compliance deadlines. There is no set-aside designation specified, indicating the contract is open to eligible small or large businesses, and performance is expected to occur wherever the contractor’s operations are located, as no specific place of performance is defined. The contract is accessible through the DIBBS platform for further procurement details.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 336415
New
DIBBS
TAPE, DRIVE, RETICLEThe contract solicitation is for 178 units of TAPE, DRIVE, RETICLE with NSN 1430-01-318-3414, under solicitation number SPE4A5-26-T-302G, issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION. The requirement is governed by a suite of technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date or award date depending on the acquisition size. The item is subject to specific packaging standards, documentation mandates for source approval, and the mandatory removal of government identification from non-accepted supplies. Physical identification and marking of the bare item are required, though Item Unique Identification is not mandated per the service customer’s instruction. Export control restrictions apply due to the presence of technical data governed by ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals located in the U.S. or overseas, and requiring compliance with DFARS 252.225-7048. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completed mandatory DLA training on export-controlled data handling, and formal approval from the DLA controlling authority. Delivery is required within 171 days after award, with performance to occur in New Cumberland, Pennsylvania, 17070-5002. The solicitation closes on July 29, 2026, and the NAICS code is 336415. All correspondence and inquiries should be directed to Rasulbek Kilichev at the provided contact information.
Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
SEALING STRIPThe contract pertains to the procurement of a sealing strip with NSN 6610-00-126-6113 and part number 10201-004, under solicitation SPE4A5-26-T-303K, requiring delivery of 11 units within 333 days from the contract date, with delivery terms FOB origin. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers including RP001 for packaging, RQ011 for removal of government identification from non-accepted supplies, and RQ017 for physical identification and bare item marking. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, using zero non-conformances unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must meet MIL-STD-2073-1E standards with specific preservation methods, materials, and unit containment as detailed, and marking must comply with MIL-STD-129 without special markings. Palletization adheres to DLA packaging requirements, and shipment is directed to the parcel post address in Tracy, California. Inspection and acceptance occur at the destination, with no variance allowed in quantity. The contract specifies the unit of issue as each (EA), with a total price of $11.00, and identifies Hien-Van Trinh as the primary point of contact for the Department of Defense’s ASC Supplier Oper OEM Division.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
SPACER, SLEEVEThe contract is for a spacer sleeve item with part number 741073CL13 and NSN 5365016879226, under solicitation SPE4A5-26-T-302M, requiring delivery of one unit within five days to Fort Irwin, California. The item is classified as a critical application and must comply with stringent technical and quality requirements referenced from the DLA Master List, including packaging standards MIL-STD-2073-1E and marking specifications per MIL-STD-129. Supply chain traceability documentation must be retained per DLA Directive Procurement Note C03, and the item must not bear government identification if not accepted. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and attributes are assigned verification levels based on criticality. FAA airworthiness approval is mandated via CDRL RQ019, and preservation, packaging, and marking adhere to DLA and FAA-specific rules. The item must be shipped via the fastest traceable means, excluding parcel post, with delivery FOB origin and inspection and acceptance taking place at destination. The contract includes no quantity variance and specifies no unique item identification per customer request. The supplier, RTX Corporation, must meet all technical data package requirements referenced in QAP 13873, with an expiration of the contract data requirement set for January 14, 2025, and the required delivery date is July 15, 2026.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
GIMBAL AND BRACKETThe contract specifies the procurement of three Gimbals and Brackets with part number 1878032 and NSN 6605-00-089-9500 under solicitation SPE4A5-26-T-299F, with a total contract value of $9.00 and a delivery requirement of 171 days from award, to be delivered FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. All items must comply with MIL-STD-2073-1E for preservation and packaging, MIL-STD-129 for marking, and DLA packaging requirements, with no special marking required and no palletization beyond standard practices. Inspection and acceptance occur at the destination, with zero tolerance for quantity variance. The contract references technical and quality standards from the DLA Master List, mandates zero-defect sampling under MIL-STD-1916 or comparable zero-based plans, and assigns verification levels of VII, IV, and II for critical, major, and minor attributes respectively. The supplier must adhere to CMMC Level 2 cybersecurity self-assessment requirements, implement configuration change management procedures, and prohibit the intentional use of mercury or mercury-containing compounds in any component, preservation, packaging, or marking, except for specific exempted applications defined by NAVSEA which must include secondary containment. Item Unique Identification is waived per DFARS 252.211-7003(c)(1)(i), and all supplies must be cleared of government identification if not accepted. The original required delivery date is March 10, 2027, with a need ship date of January 17, 2027.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
DIBBS
PYROMETER, INDICATINGThe contract pertains to the procurement of one indicating pyrometer, identified by NSN 6685-01-350-9216 and part number 4200-001-001, supplied by King Nutronics Corporation as a commercial off-the-shelf item. Delivery is required within 171 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and no quantity variance permitted. The item must be packaged in strict compliance with MIL-STD-2073-1E and MIL-STD-129 marking standards, with no special markings required. Packaging and preservation must adhere to DLA requirements and explicitly prohibit the use of mercury or mercury compounds in any form during preservation, packaging, or marking, except for functional uses in specific instruments or batteries as outlined by NAVSEA. Mercury-containing portable lamps and instruments must include shockproof design and a secondary containment boundary. The supplier must provide Safety Data Sheets aligned with OSHA’s revised Hazard Communication Standard and conforming labels per 29 C.F.R. 1910.1200, and ensure employee training on these requirements. Inspection and acceptance occur at the destination, with no need for item unique identification. The contract was issued under solicitation SPE4A5-26-T-301F, with a response deadline of July 29, 2026, and a required ship date of January 17, 2027.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 325998
New
DIBBS
SCALE REMOVING COMPThe contract specifies the procurement of a scale removing compound identified by NSN 6850-12-382-7353 and commercial part number 56.00.562, supplied in container units with each container holding 100 tabs for a total of 150 tabs per container. A total of 216 containers are required to be delivered FOB destination within 144 days of contract award, with no tolerance for quantity variance. The product is classified as a commercial off-the-shelf item, and original manufacturer commercial packaging is mandatory—repackaging is prohibited. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including special marking code ZZ for unique requirements, and palletization must adhere to DLA packaging standards. The supplier must provide GHS-compliant Safety Data Sheets and approved product labels, which must be reviewed and approved by technical personnel before contract award, with copies submitted to the DLA Aviation HMIRS office. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs as defined. The material has no shelf life restriction. Delivery is to the DLA Distribution San Joaquin warehouse in Tracy, CA, with transportation governed by DLA procedural notes C19 and C20. The solicitation is a total small business set-aside under NAICS code 325998, with a response deadline of July 29, 2026, and an award expected under contract number SPE4A5-26-T-301W.
All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 325110
New
DIBBS
PROMOTER, CHEMICAL AThe contract is for the procurement of PROMOTER, CHEMICAL A, a commercial off-the-shelf (COTS) item identified by NSN 6850-01-719-2762 and part number AP-1, supplied by ANDPAK, INC in cases containing twelve 11.0 fluid ounce cans each. A total of nine cases are required under solicitation SPE4A5-26-T-304N, with delivery due within 20 days FOB destination. Strict packaging and marking standards apply, including compliance with MIL-STD-2073-1E for preparation, MIL-STD-129 for marking, and DLA packaging requirements, with special handling codes for hazardous materials and Type I shelf-life labeling. The item has a non-extendable 12-month shelf life requiring specific markings per special code 32. Mandatory documentation includes approved Safety Data Sheets and OSHA hazard warning labels, which must be reviewed and approved by technical personnel prior to award and submitted to the DLA Aviation HMIRS office. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and all attributes are assigned verification levels or AQLs as defined. All shipments must be sent via traceable freight, not parcel post, to the designated Nellis AFB delivery address. The contract incorporates applicable technical and quality requirements from the DLA Master List, with inspection and acceptance occurring at the destination and zero tolerance for quantity variance.
Petrochemical Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, STRAIGHTThe contract pertains to the procurement of a straight shaft identified by part number 392184-7 and NSN 3040-01-544-1203, with a quantity of 14 units to be delivered FOB origin in accordance with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements. The item is classified as a critical application item under Lockheed Martin Corp and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, indicated by R or I numbers. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stipulated, and attributes are to be classified with corresponding verification levels or AQLs. Packaging must adhere to DLA-specific guidelines including palletization and the use of specified preservation methods and materials, with no special marking required. Delivery is required within 171 days of order placement, with an original required delivery date of May 13, 2027, and a need ship date of January 17, 2027. The destination for delivery is the DLA Distribution San Joaquin facility in Tracy, California, with inspection and acceptance occurring at the destination. No quantity variance is permitted, and the unit price is $14.00 per unit for a total contract value of $196.00. The contract is issued under solicitation number SPE4A5-26-T-303C, with a response deadline of July 29, 2026, and is categorized under NAICS code 333613. Transportation instructions are governed by DLA procedural notes C19 and C20, and the unit of issue is EA as defined by DLA standards. The point of contact for the contract is Hope Scott of the Department of Defense’s ASC Supplier Operations OEM Division.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
GAGE, COMPOUND PRESSThis contract specifies the procurement of a GAGE, COMPOUND PRESSURE-VACUUM, DIAL INDICATOR with NSN 6685011318107 and part number SC4MC30CWRCNA, under solicitation SPE4A5-26-T-301Z, with a total quantity of 125 units to be delivered FOB origin within 219 days. The item is classified as a critical application item and must comply with technical specifications outlined in MIL-G-18997E and quality assurance procedures QAP-106. Mandatory adherence to DLA packaging requirements, MIL-STD-2073-1E preservation methods, and MIL-STD-129 marking standards is required, including special marking as a delicate instrument. Mercury and mercury compounds are strictly prohibited in all phases of manufacturing, packaging, and preservation except for specific functional uses such as batteries, lighting, or instruments approved by NAVSEA, and portable devices containing mercury must include shockproof design and secondary containment per NAVSEA 5100-003D. Inspection and acceptance occur at origin, with no quantity variance permitted. Item Unique Identification is not required per the Service customer’s request. A separate first article test line item is included with one unit designated for testing; pricing for this line item is required, but no award will be made if the test is waived. The contract is a total small business set-aside under NAICS 334519, with delivery directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contractor must comply with all referenced technical, quality, and environmental restrictions set forth in the DLA Master List of Requirements, and transportation logistics follow DLAD Proc Note C19 and C20.
Other Measuring and Controlling Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
COUPLING, CLAMP, GROOVEDThis contract specifies the procurement of a grooved coupling and clamp, identified by NSN 5340-01-714-1224 and part number NV1021906T001, for a quantity of three units under solicitation SPE4A5-26-T-298B. The item is classified as a critical application item supplied by Hamilton Sundstrand Corporation and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including packaging, marking, and inspection standards set by MIL-STD-2073-1E and MIL-STD-129. All packaging and preservation methods must adhere to DLA’s RP001 guidelines, prohibiting the use of mercury or mercury-containing compounds in preservation, packaging, or marking, with specific exceptions for functional uses in batteries, instruments, sensors, and weapon systems as defined by NAVSEA. Mercury-containing portable lamps and instruments must include a secondary containment boundary and be shock-proof in compliance with NAVSEA 5100-003D. Delivery is required FOB origin within 171 days of contract award, with zero tolerance for quantity variance, and inspection and acceptance occur at the destination facility in New Cumberland, Pennsylvania. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The contract mandates strict adherence to DLA packaging and marking procedures, with no special marking required and palletization conforming to DLA standards. The delivery deadline is January 17, 2027, with the original required delivery date set for January 17, 2028. All shipments must be addressed to the DLA Distribution facility at DDSP New Cumberland and transportation logistics must follow DLAD Proc Notes C19 and C20. The contract was posted on July 21, 2026, with responses due by July 29, 2026, under NAICS code 332510 for industrial machinery manufacturing.
Hardware Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details