Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Defense-Compliant Packaging and Marking Services

Active

Federal

Response Deadline08/01/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the provision of military-standard packaging, labeling, and palletization services for sensitive electronic modules, strictly adhering to MIL-STD-2073-1E and MIL-STD-129 specifications. These standards ensure that all components are protected during storage and transit under demanding military logistics conditions, with precise labeling and documentation to support traceability, inventory control, and operational readiness. The work must be performed to meet rigorous defense requirements for durability, environmental resistance, and uniformity across all packaged units. This subcontract is issued by the Department of Defense’s ACTIVE DEVICES DIVISION, with performance required at a facility in Tracy, California, postal code 95304-5000. The solicitation was posted on July 24, 2026, and responses are due by August 1, 2026. The NAICS code 493190 identifies the service category as Other Support Activities for Transportation, indicating the focus on logistics and handling services rather than manufacturing. All deliverables must comply fully with applicable military norms without deviation, and contractors are expected to demonstrate proven experience in defense-compliant packaging systems.

General Info

Military-standard packaging and labeling for electronic modules per MIL-STD-2073-1E and MIL-STD-129 in Tracy, CA.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

493190 - Other Warehousing and StorageView NAICS

Place of Performance

TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 24

subcontract

Response DeadlineAug 1

Submission deadline

Response Deadline

08/01/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ACTIVE DEVICES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide military-standard packaging, labeling, and palletization services per MIL-STD-2073-1E and MIL-STD-129 for sensitive electronic modules.

Similar Contracts

Same NAICS industry code

Packaging and Labeling Services for DOD ShipmentsThe contract requires specialized packaging and labeling services for Auto Inflator Kits in full compliance with Department of Defense standards, ensuring readiness for direct shipment to DLA distribution centers. All work must adhere strictly to military specifications for safety, durability, and traceability, including proper documentation, marking, and containerization to facilitate efficient handling and inventory management within the defense logistics network. The packaging must be engineered to withstand environmental stresses and operational conditions typical of military supply chains. This is a subcontract opportunity posted by DLA Dist San Joaquin under the Department of Defense, with a NAICS code of 493190 for other transportation support activities. Interested parties must submit responses by the deadline of July 31, 2026, and performance is expected to occur at locations determined by the contracting entity. While no specific place of performance or point of contact is listed, all work must align with DLA’s requirements for receiving and distributing defense-critical components, with non-compliance potentially leading to rejection of deliverables or contract termination.

DLA DIST SAN JOAQUIN

POSTED

about 13 hours ago

DEADLINE

Packaging and Marking ServicesThe contract specifies the proper packaging, palletization, and marking of shipments containing sealing compound in full compliance with military logistics standards. All activities must adhere to stringent defense department requirements to ensure safe handling, transportation, and inventory management across military supply chains. The work is classified as a subcontract under the NAICS code 493190, indicating it pertains to other transportation and support activities related to freight. The contract is managed by the Defense Logistics Agency under the Department of Defense, with performance expected to meet operational readiness criteria without geographic restriction specified. The solicitation was posted on July 24, 2026, and the award details are accessible through the DIBBS system using the contract number SPE8ES26P1049.

Defense Logistics Agency

POSTED

about 13 hours ago

DEADLINE

Military Packaging and Labeling ServicesThe contract requires the provision of military-standard packaging, marking, and labeling services for clutch disks in full compliance with MIL-STD-129 specifications. This includes accurate application of National Stock Numbers, CAGE codes, and any required hazardous material labeling where applicable, ensuring all items meet Department of Defense standards for identification, handling, and logistics traceability. The work must be performed to exacting military guidelines to support supply chain integrity and operational readiness. This is a subcontract opportunity issued by the Strategic Acquisition Program Directorate under the Department of Defense, with a solicitation posted on July 24, 2026, and a response deadline of August 25, 2026. The North American Industry Classification System code 493190 applies, indicating the nature of the work involves other support activities for transportation. Performance of the contract is expected to align with DoD logistics requirements, though specific performance locations are not detailed. Interested parties must submit proposals through the designated DIBBS portal prior to the deadline to be considered.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Military-Compliant Packaging and MarkingThe contract requires complete packaging, labeling, and barcoding of delivered screws in strict compliance with MIL-STD-2073-1E and MIL-STD-129 standards, ensuring all items meet military grade requirements for durability, identification, and traceability. This includes the application of 2D Data Matrix barcodes and accurate NSN marking on each unit, enabling seamless logistics and inventory tracking across defense supply chains. The work must be executed with precision to meet federal specifications for military hardware handling and documentation. This is a subcontract opportunity posted by the ASC COMMODITIES DIVISION under the Department of Defense, with a response deadline of July 31, 2026. The NAICS code 493190 indicates the scope falls under Other Support Activities for Transportation, emphasizing the logistical and packaging nature of the services. The place of performance and point of contact details are not specified, but interested parties must adhere to all technical and procedural requirements outlined in the referenced military standards to qualify for award. The solicitation is accessible through the DIBBS system at the provided URL.

ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

MIL-STD-2073-1E Compliant Packaging and PreservationThe contract requires the provision of dry cleaning, wrapping, and preservation services for military electronic components in strict compliance with MIL-STD-2073-1E standards, ensuring long-term protection against environmental degradation during storage and transit. All work must also include palletization activities that adhere to DLA RP001 requirements, guaranteeing uniformity, stability, and logistical compatibility across defense supply chains. The services are aimed at maintaining the operational readiness and integrity of critical electronic systems through professionally executed packaging and preservation procedures. This subcontract is issued under NAICS code 493190 by the Department of Defense's Active Devices Division, with a response deadline of August 1, 2026, and was posted on July 24, 2026. The work is performed under a federal subcontracting vehicle and will support defense logistics through standardized, compliant handling of sensitive equipment. While specific location details are not provided, performance is expected to meet all DLA and DoD regulatory guidelines without exception, and interested parties must submit proposals through the designated DIBBS platform prior to the deadline.

ACTIVE DEVICES DIVISION

POSTED

about 13 hours ago

DEADLINE

Military-Compliant Packaging and Labeling ServicesThe contract requires full compliance with U.S. Department of Defense logistics standards for packaging, marking, and labeling military shipments destined for Sigonella, Italy. All materials must be properly secured, marked, and labeled in accordance with Defense Logistics Agency specifications, including accurate “Ship To” and “Mark For” designations to ensure seamless international delivery and receipt at the designated location. The work must meet stringent military requirements for traceability, durability, and international customs compliance to support operational readiness. This subcontract is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses, as defined by the NAICS code 493190, and is administered by DLA Distribution under the Department of Defense. The opportunity was posted on July 24, 2026, with a hard deadline for responses on July 29, 2026, at 4:00 PM EST. Performance will be carried out to support logistics operations at Sigonella, and interested parties must ensure their proposals demonstrate full alignment with DLA’s military packaging and labeling protocols without exception.

DLA Distribution

POSTED

about 18 hours ago

DEADLINE

Defense-Compliant Packaging and PalletizationThe contract requires full compliance with military packaging and palletization standards, specifically MIL-STD-2073-1E, MIL-STD-129, and DLA RP001, for the secure handling and transport of control units. All packaging must include robust moisture protection measures and accurate barcoding as mandated by federal defense logistics protocols to ensure traceability, durability, and readiness for military deployment. The work must be executed to meet stringent defense logistics requirements, with every step verified against official specifications to prevent contamination, damage, or noncompliance during transit or storage. Performance is designated for Tracy, California, with a postal code of 95304-5000, and the opportunity is structured as a subcontract under the Department of Defense’s ASC Commodities Division. The solicitation was posted on July 23, 2026, and responses are due by July 28, 2026, leaving a narrow window for submission. The NAICS code 493190 categorizes this under Other Transportation Support Activities, indicating the focus on logistics support rather than manufacturing. Contractors must be prepared to adhere to all defense-specific documentation, labeling, and compliance procedures without exception.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Packaging and Marking Services (MIL-STD-129 Compliance)The contract requires comprehensive packaging, palletization, barcoding, and marking services strictly aligned with military standards, particularly MIL-STD-129 and DLA RP001, ensuring all delivered items meet the Department of Defense’s stringent labeling and logistics requirements. The work must be performed at the New Cumberland facility with a zip code of 17070-5002, where all materials will be processed to maintain uniformity, traceability, and compliance for military supply chain operations. The scope encompasses the full lifecycle of preparation for shipment, including proper identification, containment, and documentation to support defense logistics efficiency and readiness. This subcontract, issued under NAICS code 493190, was posted on July 23, 2026, with a mandatory response deadline of August 3, 2026, and is managed by the DDSP New Cumberland Facility under the broader authority of the Department of Defense. There is no set-aside designation specified, indicating the opportunity is open to all eligible contractors without preference based on business size or category. All proposals must demonstrate proven capability in executing military packaging standards and have the infrastructure to meet the precise technical and procedural demands of the specified directives.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Packaging and Marking of Propeller ShaftsThe contract requires the military-compliant packaging, preservation, palletization, and labeling of propeller shafts to ensure safe and standardized handling during shipment. All work must adhere to rigorous defense specifications, including the precise application of barcodes for traceability and compliance with hazardous material protocols if any components are classified as hazardous. The packaging and marking process must guarantee product integrity throughout transit and meet all applicable military logistics standards. This subcontract, posted under NAICS code 493190 by the Strategic Acquisition Program Directorate within the Department of Defense, is open for responses until July 28, 2026. The performance location and point of contact details are not specified, but the work is intended to support defense logistics operations under the DLA’s procurement framework. Interested parties must submit proposals through the designated DIBBS portal by the stated deadline to be considered for award.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Packaging and Marking Services for Defense ShipmentThe contract requires compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking to ensure all valve supply items are properly prepared for defense shipment. These standards mandate specific methods for protecting, labeling, and documenting items to meet military logistics and handling requirements, ensuring interoperability, traceability, and durability throughout the supply chain. All packaging and marking must align precisely with these specifications without deviation to guarantee acceptance by defense logistics systems. The contract is categorized as a subcontract under NAICS code 493190, with the performance location set at NEW CUMBERLAND, Pennsylvania, 17070-5002. It was posted on July 23, 2026, and responses are due by August 3, 2026, under the purview of the Department of Defense through the DDSP NEW CUMBERLAND FACILITY. The solicitation is managed via the DIBBS platform, and while no set-aside provisions are specified, strict adherence to the technical standards is mandatory for qualification and successful performance.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Packaging, Preservation, and PalletizationThe contract requires full compliance with military standards for packaging, preservation, and palletization to ensure goods are shipped in a moisture-free, durable condition suitable for defense logistics. Preservation must follow Method 10 CLNG/DRY, and all packaging, labeling, and palletization must meet DLA and MIL-STD specifications to guarantee operational readiness during transit and storage. The work is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond. The NAICS code 493190 identifies the work as other transportation support activities, specifically tied to military logistics and supply chain handling. The solicitation opens on July 23, 2026, with a hard deadline for submissions on July 28, 2026, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. All performance will align with federal requirements for secure, standardized military shipping protocols.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Packaging & Preservation ServicesThe contract requires the military-compliant packaging and preservation of valves in accordance with MIL-STD-2073-1E, specifying the use of Preservation Method AE for dry sealing, along with thorough cleaning and proper palletization to ensure long-term protection and readiness. All work must adhere strictly to Department of Defense standards for handling, packaging, and storage to maintain the integrity of the valves under military operational conditions. The packaging process must be performed in a controlled environment to prevent contamination and ensure compliance with aerospace and defense logistics requirements. The solicitation is a subcontract under the NAICS code 493190, issued by the DLA Dist San Joaquin under the Department of Defense, with performance required at the location in Tracy, California, 95304-5000. Interested parties must submit responses by August 3, 2026, and the opportunity was posted on July 23, 2026. This contract does not specify a set-aside type and is open to qualified subcontractors capable of meeting the rigorous military packaging and preservation criteria outlined in the standard.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

Sustainable and Environmentally Compliant Product SupplyThe contract requires the supply of electrical connectors that meet stringent federal sustainability standards, ensuring all materials and manufacturing processes are environmentally compliant. The work must align with the Department of Defense’s goals for reducing environmental impact, particularly through the use of non-hazardous substances, recyclable components, and energy-efficient production methods. This is a subcontract under NAICS code 325998, with performance required at the facility in New Cumberland, Pennsylvania, 17070-5002. All proposals must be submitted by August 7, 2026, and the solicitation was posted on July 24, 2026, indicating an extended evaluation window typical for complex technical compliance procurements. The contracting activity is led by the Active Devices Division, underscoring the critical nature of these components in defense systems. Suppliers must demonstrate proven capability in delivering products that satisfy both functional performance requirements and evolving environmental regulations without compromising reliability or lifecycle durability.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 13 hours ago

DEADLINE

Physical Item Marking and Identification ServicesThe contract requires permanent physical marking of electrical connectors to ensure traceability and adherence to military standards, even after the items are removed from their original packaging. This work must be performed to meet stringent defense requirements for identification, durability, and compliance, with the marking techniques and materials selected to withstand harsh environmental conditions and extended service life. The effort is critical for logistics, maintenance, and readiness within defense operations, where unboxed components must remain identifiable throughout their lifecycle. This is a subcontract under the NAICS code 339999 for other miscellaneous manufacturing, issued by the Active Devices Division of the Department of Defense. The place of performance is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 24, 2026, and responses are due by August 7, 2026. The contract does not specify a set-aside type, and all interested parties must respond through the designated DIBBS platform link to be considered.

All Other Miscellaneous Manufacturing

POSTED

about 13 hours ago

DEADLINE

Packaging, Labeling, and Palletization ServicesThe contract requires the commercial and military-compliant packaging, labeling, and palletization of electrical connectors in full alignment with DLA and federal standards, ensuring all materials meet rigorous defense supply chain requirements. The work must be executed to maintain traceability, durability, and regulatory compliance throughout handling and transit, with specific adherence to applicable military specifications for packaging integrity and label accuracy. Performance is designated for New Cumberland, PA, with the place of performance clearly established under the federal procurement framework. This is a subcontract opportunity under NAICS code 423830, issued by the Active Devices Division within the Department of Defense, with a response deadline of August 7, 2026. All proposals must demonstrate capability to fulfill the exacting packaging and labeling protocols mandated for defense-grade electrical components, emphasizing precision in documentation, unit consolidation, and pallet configuration. The solicitation is open to qualified subcontractors with proven experience in military-compliant logistics operations, and all submissions must be submitted via the DIBBS platform prior to the stated deadline.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 13 hours ago

DEADLINE

Electrical Connector Manufacturing – Qualified Product (QPL)The contract seeks the manufacture and delivery of military-spec electrical plug connectors identified by NSN 5935-01-369-5686, requiring full compliance with Qualified Product List (QPL) standards and the MIL-DTL-83723H specification. These connectors must meet stringent military performance, durability, and environmental requirements for use in defense applications, ensuring interoperability and reliability across critical systems. The work is to be performed under a subcontract arrangement with place of performance specified as New Cumberland, Pennsylvania, 17070-5002, and is managed by the Active Devices Division within the Department of Defense. All responses must be submitted by August 7, 2026, with the solicitation issued under NAICS code 334417 for Other Electronic Component Manufacturing. The contract is not subject to any set-aside designation and is open to qualified manufacturers capable of delivering products that have been validated on the QPL. Prospective bidders must ensure adherence to all technical, quality, and delivery requirements outlined in the military specification, with successful performance essential to sustaining defense supply chain integrity. The opportunity is accessible through the DIBBS platform via the provided link.

Electronic Connector Manufacturing

POSTED

about 13 hours ago

DEADLINE

MIL-STD-129 Compliant Marking, Labeling, and BarcodingThe contract requires full compliance with MIL-STD-129 standards for external markings, barcoding, and handling labels on all delivered items. This includes accurately applying the contract number, lot or item number, and specific warnings related to PVT samples to ensure proper identification, traceability, and safety during transit and handling. All labeling must meet the detailed technical specifications of the military standard to guarantee uniformity and interoperability across defense logistics systems. The work is classified as a subcontract under NAICS code 811211, and the solicitation is managed by the ACTIVE DEVICES DIVISION within the Department of Defense. The response deadline is August 1, 2026, with the solicitation posted on July 24, 2026. There is no specified place of performance or point of contact listed, and the contract does not indicate a set-aside classification. All work must be completed in accordance with the referenced standard to meet DoD logistics and supply chain requirements.

Consumer Electronics Repair and Maintenance

POSTED

about 13 hours ago

DEADLINE

Qualified Electrical Connector Manufacturing (MIL-SPEC Compliant)The contract calls for the manufacture and supply of a military-specification electrical connector identified by part number M83723/72G2443N, which must fully comply with the stringent performance and design standards outlined in MIL-DTL-83723H and MIL-DTL-83723/72E. The product is required to be configuration-controlled and listed on the Qualified Products List to ensure it meets all federal defense specifications for reliability, durability, and interoperability in mission-critical applications. The connector will be produced under a subcontract arrangement, with quality assurance protocols aligned with Department of Defense requirements to guarantee consistent adherence to MIL-SPEC benchmarks throughout production. The solicitation was posted on July 24, 2026, with responses due by August 1, 2026, and falls under the NAICS code 334417, which pertains to the manufacturing of electronic connectors and components. The contracting activity is managed by the Active Devices Division under the Department of Defense, indicating the requirement stems from a direct military or defense system procurement need. Though specific location details for performance or point of contact are not provided, the contract is accessible via the DIBBS sourcing platform, and participation is likely restricted to qualified suppliers with established credentials in defense-grade electronics manufacturing.

Electronic Connector Manufacturing

POSTED

about 13 hours ago

DEADLINE

U.S.-Flag Transportation and Domestic LogisticsThe contract requires the secure and compliant transportation of finished modules from the manufacturer to the DLA warehouse located in Tracy, California, utilizing only U.S.-flagged vehicles to ensure adherence to domestic defense shipping regulations. All logistics operations must meet strict federal standards for defense-related freight movement, emphasizing national security and regulatory compliance throughout the transit process. The work is classified as a subcontract under NAICS code 484220, which pertains to truck transportation of freight and materials, and is managed by the Active Devices Division under the Department of Defense. The opportunity was posted on July 24, 2026, with a mandatory response deadline of August 1, 2026, and performance is exclusively tied to the zip code 95304-5000 in Tracy, CA. The contract mandates full compliance with U.S. flag requirements, meaning no foreign-owned or flagged carriers are permitted. Although the solicitation number and point of contact details are not provided, the official opportunity can be accessed through the DIBBS portal using the provided link. All participants must ensure their operations align with defense logistics protocols and possess the necessary certifications to handle sensitive defense cargo within the U.S. domestic transportation network.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 13 hours ago

DEADLINE

Specialty Metals and Hazardous Materials Compliance SupportThe contract requires comprehensive technical compliance, materials traceability, and certification services for specialty metals and restricted substances in accordance with DFARS and NAVSEA regulatory standards. This subcontract focuses on ensuring that all materials used in defense-related applications meet stringent government requirements for composition, sourcing, and documentation, with particular attention to hazardous substances and controlled metal alloys. The services must guarantee full traceability from raw material origin through to final component integration, supporting audit readiness and regulatory adherence across the supply chain. Performance is scheduled to take place in Tracy, California, with a ZIP code of 95304-5000, and the work falls under NAICS code 541380, indicating it involves other scientific and technical consulting services. The contract was posted on July 24, 2026, with a response deadline of August 1, 2026, and is administered by the Active Devices Division within the Department of Defense. While no specific point of contact or set-aside details are provided, the solicitation number SPE7M526Q0758 should be used for submission and reference purposes, and all deliverables must align with the technical and compliance expectations outlined by NAVSEA and DFARS.

Testing Laboratories and Services

POSTED

about 13 hours ago

DEADLINE

Precision Manufacturing of Technical ModuleThe contract requires the manufacture of ten high-reliability electronic modules with part number 853000585, built to strict defense specifications covering the full lifecycle from component sourcing and assembly through testing and quality assurance. All work must comply with defense-grade standards to ensure performance under demanding operational conditions, and the production is to be executed at the designated location in Tracy, California, with a zip code of 95304-5000. The contract is classified as a subcontract under NAICS code 334510, indicating it pertains to electronic component and product manufacturing, and is managed by the Active Devices Division of the Department of Defense. Interested parties must submit proposals by the response deadline of August 1, 2026, with the solicitation posted on July 24, 2026. The opportunity is not set aside for any specific small business category, and while no point of contact is listed, further details can be accessed through the provided DIBBS link. The nature of the work demands proven experience in defense electronics manufacturing, rigorous quality control processes, and adherence to stringent documentation and traceability requirements associated with critical defense systems.

Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

about 13 hours ago

DEADLINE

Small Business and Socioeconomic Compliance SupportThe contract seeks consulting services focused on supporting small business representation, ensuring compliance with SAM.gov requirements, and managing the appropriate flow-down of subcontracting obligations under socioeconomic programs. The work is tied to Department of Defense activities under the ACTIVE DEVICES DIVISION and is classified as a subcontract with a NAICS code of 541611, indicating management consulting services. Providers must align their support with federal contracting regulations governing small business participation, including proper documentation, reporting, and adherence to subcontracting plans required by socioeconomic initiatives. The solicitation was posted on July 24, 2026, with proposals due by July 31, 2026, and the performance location is not specifically defined, allowing flexibility in execution. The primary objective is to enable the contracting entity to maintain regulatory compliance and maximize opportunities for qualified small businesses within its subcontracting network.

Administrative Management and General Management Consulting Services

POSTED

about 13 hours ago

DEADLINE

Domestic and International Logistics with U.S.-Flag Vessel ComplianceThe contract involves the domestic and international logistics of transporting supplies under strict compliance with U.S.-flag vessel requirements for ocean transport, ensuring adherence to maritime regulations that mandate the use of American-owned and crewed ships. All activities must align with Department of Defense standards, including the generation and submission of DoD-compliant documentation to support chain-of-custody, customs clearance, and operational reporting. The work falls under NAICS code 483111, indicating a focus on ocean transport, and is structured as a subcontract to support the ACTIVE DEVICES DIVISION within the Department of Defense. The solicitation was posted on July 24, 2026, with a response deadline of July 31, 2026, requiring interested parties to submit proposals within a seven-day window. Performance locations are not specified but are expected to span both U.S. domestic and international routes as dictated by mission requirements.

Deep Sea Freight Transportation

POSTED

about 13 hours ago

DEADLINE