Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Defense Logistics Agency Compliant Marking and Labeling

Active

Federal

Response Deadline08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the application of durable Data Matrix barcodes and bare item markings to gaskets in accordance with RQ017 and MIL-STD-129 standards to ensure full traceability and identification for the Defense Logistics Agency. This work is critical for maintaining compliance with federal military labeling requirements, enabling accurate inventory management and logistics tracking across the Department of Defense supply chain. All markings must be permanently affixed to withstand environmental and operational conditions without degradation. The contract is classified as a subcontract under NAICS code 323111, and performance is designated to occur at Cherry Point, North Carolina, with a zip code of 28533-5040. The solicitation was posted on July 23, 2026, and responses are due by August 3, 2026. The contracting office is the Active Devices Division under the Department of Defense, and all work must align strictly with the specified military standards to meet DLA's operational and compliance needs.

General Info

Apply durable Data Matrix barcodes and bare markings to gaskets per MIL-STD-129 and RQ017 at Cherry Point, NC for DLA traceability.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

323111 - Commercial Printing (except Screen and Books)View NAICS

Place of Performance

CHERRY POINT, NC, 28533-5040, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ACTIVE DEVICES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Apply durable Data Matrix barcodes and bare item markings to gaskets per RQ017 and MIL-STD-129 for DLA traceability and identification.

Similar Contracts

Same NAICS industry code

Signage and Branding ProductionThe contract titled Signage and Branding Production encompasses the design and installation of professional event signage for a Department of Defense event in Fort Worth, Texas, with a zip code of 76102. It includes the creation and setup of directional signs, sponsor booths, session room identifiers, and comprehensive branding materials such as banners and backdrops, ensuring a cohesive and impactful visual presence throughout the event space. The work falls under NAICS code 323111, classifying it as commercial printing, and is issued as a subcontract under the W076 Endist Ft Worth designation. The solicitation was posted on July 26, 2026, with a firm deadline for responses set for August 14, 2026, at 10:00 PM Eastern Time. There is no specified set-aside type or organization classification, and the place of performance is exclusively located in Fort Worth, where all signage must be fabricated and installed according to the event’s specifications. While no point of contact details are provided, the contract is accessible through the SAM.gov public portal for potential bidders seeking further information or submission guidelines.

W076 Endist Ft Worth

POSTED

DEADLINE

Military Marking, Labeling, and UID ComplianceThis contract requires permanent marking, barcode and RFID labeling services fully compliant with MIL-STD-129 and RQ017 standards, including specialized FAT labeling protocols to meet rigorous military identification requirements. The work must ensure each item is uniquely identified, traceable, and properly labeled using approved methods and materials to support logistics, inventory, and asset management across Department of Defense supply chains. All labeling activities must adhere to strict technical specifications for durability, readability, and data accuracy under operational conditions. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, with the NAICS code 323111 indicating it pertains to printing and related support activities. It is managed by the ASC Commodities Division of the Department of Defense and has a response deadline of August 8, 2026. The place of performance and point of contact details are not specified, but the work is expected to support federal military logistics infrastructure with no geographic restrictions indicated. Interested parties must submit proposals through the DIBBS portal before the deadline to be considered.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Safety and Compliance LabelingThe contract requires the production and installation of durable labels compliant with OSHA and NFPA standards for use in fluid identification, pump operations, safety warnings, and unit identification. These labels must be engineered to withstand harsh environmental conditions and maintain legibility over time, ensuring continuous safety and regulatory compliance across operational settings. The work involves precise application techniques and material selection to meet federal safety requirements, with all deliverables subject to strict quality control to prevent misidentification or operational hazards. This is a subcontract under the Department of Transportation’s Hawaii office, with a solicitation posted on July 24, 2026, and a response deadline of August 15, 2026. The NAICS code 323111 indicates the work falls under printing and related support activities, specifically focusing on label manufacturing. Performance location details are not specified, but the labels must be suitable for deployment in DOT-related facilities in Hawaii. Bidders must demonstrate capability in manufacturing standardized safety labels and providing installation services that align with federal safety protocols, though no set-aside provisions or point of contact information is provided in the posting.

Department of Transportation

POSTED

DEADLINE

Blanket Labeling and Packaging ServicesThe contract requires the application of durable labels containing fiber content, NSN, contract number, and DDT warning on specified items, ensuring compliance with military labeling standards. Following label application, the items must be packaged in poly bags with eight units per carton, then palletized on 40x48 inch pallets and secured with shrink wrap according to military logistics specifications. All work must adhere to strict quality and documentation requirements to meet defense supply chain protocols. The contract is structured as a small business set-aside under SBA guidelines, with the NAICS code 323111 indicating it falls under printing and related support activities. The solicitation is managed by the Department of Defense through C AND T SUPPLY CHAIN and is open for responses until August 24, 2026, with performance expected to align with DoD logistics and distribution standards.

C AND T SUPPLY CHAIN

POSTED

DEADLINE

Military-Compliant Marking and LabelingThis contract requires the application of durable, scannable labels and markings in strict compliance with MIL-STD-129 to support military logistics operations and seamless integration with the Wide Area Workflow system. The work must ensure that all markings are legible, weather-resistant, and machine-readable to facilitate accurate tracking and inventory management across the Department of Defense supply chain. The labels and markings must meet all technical specifications for content, placement, and material resilience mandated by the standard to guarantee uninterrupted operational readiness. The solicitation is issued as a subcontract under the NAICS code 323111 for printing and related support activities, with a response deadline of August 8, 2026. Performance is expected to occur at New Cumberland, Pennsylvania, with a zip code of 17070-5002. Although the agency and point of contact details are not provided, the contracting organization is listed as LAND SUPPLIER OPNS ENGINES within the Department of Defense. Participation is open without a specific set-aside designation, and all submissions must adhere to the technical and procedural requirements tied to MIL-STD-129 and WAWF interoperability to be considered.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Military-Compliant Labeling and MarkingThe contract pertains to the production and application of military-standard labels requiring strict adherence to defense specifications, including data matrix codes for traceability, ESD warnings marked with Code '39' to ensure electrostatic discharge protection, and hazardous material labels compliant with established military safety protocols. All labeling must be fabricated and applied to meet rigorous environmental and durability standards suitable for defense equipment and systems used in operational environments. The work is classified as a subcontract under NAICS code 323111, indicating it involves printing and related support activities specifically tailored for military use. Performance is expected to support the ACTIVE DEVICES DIVISION of the Department of Defense, with the requirement submitted on July 24, 2026, and responses due by July 31, 2026. The place of performance is not specified, but compliance with all labeling standards and delivery timelines is mandatory to fulfill the subcontract obligation.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Annual Contract for Elections Printed Forms and EnvelopesTarrant County is seeking vendors to supply printed forms and envelopes for absentee ballot mailings and other election-related communications, as mandated by the Texas Election Code. The contract is for a base term of twelve months, with the possibility of two additional twelve-month renewal periods at the County’s discretion, contingent on mutual agreement and timely submission of updated documentation prior to each option period. All pricing must be firm and fully inclusive, covering every associated cost including shipping, delivery, installation, and incidental expenses; no additional charges will be permitted after award. Vendors must accept purchase orders as the sole method of payment, and the solicitation includes a 30-day cancellation clause applicable to either party. Bids must strictly comply with all solicitation terms, and any attempt to impose additional legal agreements outside the procurement documents may result in disqualification. The contract is governed by Tarrant County’s local procurement policies, and no federal contracting clause numbering system is applied; instead, custom provisions govern core obligations. Vendors must ensure all materials meet U.S. Postal Service Election Mail guidelines, including proper barcode clear zones and postage markings, while also adhering to strict data security requirements. All sensitive election data must be protected under the CIA triad—confidentiality, integrity, availability—with strong encryption required both at rest and in transit. Vendors must designate a primary security contact, maintain audit logs, and report any data breach within 48 hours using both oral and written notification to Tarrant County’s Chief Information Security Officer. Audit rights are broad, permitting the County to examine systems, records, and subcontractors with reasonable notice, and vendors must submit annual compliance reports verifying log reviews and remediation actions. Data must remain within the 48 contiguous United States at all times, and any transfer outside this boundary requires prior written approval. Criminal background checks are mandatory for personnel accessing County data, with the County covering associated costs. Vendors must indemnify the County against third-party claims arising from their actions and cannot assign the contract without written consent. HUB/DBE participation is a key requirement, with bidders required to provide certification from recognized state or regional agencies, and failure to demonstrate good faith effort may render a bid non-responsive. Awards will go to the lowest responsive bidder meeting all technical and compliance criteria, with no trade-off evaluation permitted. Invoices must be submitted electronically or by mail to the County Auditor’s Office with the assigned purchase order number.

POSTED

DEADLINE

Shipping Container Marking and LabelingThe contract requires the precise and durable marking of shipping containers with specific military-compliant data, including NSN, CAGE code, part number, quantity, contract number, and handling cautions, ensuring all labeling meets established defense standards for longevity and readability under harsh conditions. The work must be performed to ensure full compliance with federal specifications for military shipping and logistics, with emphasis on accurate, high-visibility, and tamper-resistant application methods. This is a total small business set-aside subcontract under NAICS code 323111, issued by the Department of Commerce NOAA, with proposals due by August 4, 2026. The place of performance is specified as Grandview, Missouri, with a zip code of 64030, indicating the physical location where the marking services must be delivered. All contractors must be certified small businesses to be eligible, and the contract is open for submission through the SAM.gov portal.

Department Of Commerce Noaa

POSTED

DEADLINE

Printed and Digital Training Materials SupplyThe contract seeks the supply of printed and digital training materials including workbooks, handouts, binders, and USB drives for distribution to trainees and instructors under a subcontract arrangement. The materials are intended to support training activities managed by the Department of Defense through the Commander office, with performance required to occur in Albany, Georgia, at the specified zip code 31704. The North American Industry Classification System code 323111 indicates the work falls under printing and related support activities. Submission deadlines are firm, with responses due by 2:00 PM Eastern Time on July 29, 2026, and the opportunity was posted on July 24, 2026. All deliverables must meet specified quality and timing requirements to ensure seamless integration into ongoing training programs.

POSTED

DEADLINE

Barcoding and Labeling Compliance ServicesThe contract requires compliance with the Department of National Defence’s D-02-002-001/SG-001 standard for barcoding and labeling of military assets using UCC/EAN-128 symbology with Application Identifiers AI 241 for Product Stock Control Number or AI 7001 for National Stock Number. All labels must include both machine-readable barcodes and legible human-readable text, ensuring accurate identification and traceability across the supply chain. Labels must be durable, resistant to environmental factors, and capable of maintaining readability throughout the product’s lifecycle under operational conditions. This subcontract opportunity is open to qualified vendors capable of delivering labeling solutions that meet Canadian government defense specifications. The solicitation is tied to performance locations in British Columbia and Nova Scotia, with responses due by August 10, 2026. The NAICS code 323111 indicates the work falls under printing and related support activities, emphasizing the need for precision in label design, printing, and material selection. Compliance is mandatory, and failure to adhere to the outlined standards could result in rejection of deliverables or non-payment.

Department of National Defence

POSTED

DEADLINE

Printing and Bidding Document ReproductionThe contract entails high-volume printing and reproduction of bidding documents and construction packages, with specialized handling of large-format materials and professional binding services required to meet project specifications. Work must be executed with precision to ensure documents are accurate, legible, and properly assembled for distribution to contractors and stakeholders involved in public construction initiatives. The scope demands capability in managing large quantities of technical documentation under tight deadlines and quality standards suitable for governmental procurement processes. This is a subcontract opportunity under the NAICS code 323111, issued by the Michigan agency DTMB, with a posting date of July 24, 2026, and a response deadline of August 6, 2026, at 6:00 p.m. No set-aside designation is specified, and the place of performance and point of contact details are not provided in the data, though the work is tied to Michigan-based projects. Interested parties must submit proposals through the designated online portal prior to the deadline to be considered for award.

POSTED

DEADLINE

Military-Compliant Packaging and LabelingThe contract encompasses the custom military packaging, marking, and labeling of seal caps in strict compliance with MIL-STD-129, FED-STD-313, and ASTM D3951 standards, including all required hazard communication labeling to meet federal military specification requirements. This work must be executed to ensure full interoperability and traceability within U.S. Department of Defense logistics systems, covering all stages from initial packaging through final labeling for shipment and delivery. The effort is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses qualify to respond, aligning with SBA and FAR 19.5 guidelines. The North American Industry Classification System code is 323111, indicating the work falls under printing and related support activities. The solicitation was posted on July 23, 2026, with a deadline for responses set for July 28, 2026. The contracting activity originates from the Strategic Acq Program Directorate within the Department of Defense, though specific location details for performance, office address, or point of contact are not provided. The contract is accessible through the DIBBS system under the reference number SPE7LX26U8624, and all potential offerors must ensure adherence to all technical, regulatory, and compliance requirements outlined in the referenced military and industry standards. Failure to meet any labeling, packaging, or marking specification will result in non-compliance and potential disqualification.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

FILTER ASSEMBLY, ELECTRThe contract solicitation SPE7M5-26-U-0055 seeks the procurement of 18 electrical filter assemblies (NSN 5915-01-533-8556) under an indefinite-delivery contract structured as a unilateral simplified indefinite-delivery contract (SIDC), with a maximum contract value of $350,000 and no guaranteed minimum order until a delivery order is issued. Deliveries are required within 125 days of award, with all shipments governed by FOB origin terms, meaning the contractor bears all transportation costs to a contiguous U.S. destination. The product must meet stringent technical and quality specifications outlined in the DLA Master List of Technical and Quality Requirements, referenced via R and I numbers, with packaging and labeling conforming to MIL-STD-129, ASTM D3951 for non-hazardous goods, and TQ requirement IP025 for hazardous materials as defined by FED-STD-313. Hazardous substances must be labeled per OSHA’s Hazard Communication Standard, and any radioactive content exceeding 0.002 microcuries per gram or 0.01 microcuries per item requires special pre-award notification and compliance with MIL-STD-129 marking. Strict inspection and acceptance criteria mandate zero non-conformances in sampling under MIL-STD-1916, ASQ H1331, or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The contractor must implement CMMC Level 2 cybersecurity practices, comply with DFARS 252.204-7012 for safeguarding covered defense information, and adhere to prohibitions on mercury in hardware except for specific exempted components with secondary containment. All invoicing must be processed electronically through Wide Area WorkFlow (WAWF), and the contractor must maintain an active SAM registration and comply with employment eligibility, anti-trafficking, and sustainable procurement clauses. The solicitation is open to all offerors, with no set-aside designation, and responses must be submitted electronically via the DLA DIBBS portal by August 10, 2026, with primary point of contact Jacob Hamilton at the Defense Logistics Agency.

Other Electronic Component Manufacturing

POSTED

about 19 hours ago

DEADLINE

CONTACT, ELECTRICALThis contract, identified by solicitation number SPE7M5-26-T-353S, pertains to the procurement of electrical contacts with part number 5999-00-147-7933 and vendor part number 100060-56, supplied by TE Connectivity Corporation. A total quantity of 651 units is required at a unit price of $651.00, totaling $423,651.00, with delivery mandated within 130 days of award, arriving FOB origin and subject to inspection and acceptance at destination. The items must comply with all referenced technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which supersede any conflicting commercial standards. Packaging must adhere to RP001 DLA Packaging Requirements and MIL-STD-129 labeling, with hazardous materials handled per FED-STD-313 and TQ requirement IP025, while non-hazardous items follow ASTM D3951 unless overridden by DLA standards. All packaging must be palletized as specified and marked with the correct Unit of Issue and Quantity per Unit Pack. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date no later than December 15, 2026. The contract explicitly prohibits the use of Class I ozone-depleting substances in any manufacturing or processing step without written approval from the Contracting Officer and bans the intentional addition of mercury or mercury compounds to the product, except for specific functional applications such as batteries, fluorescent lights, and instruments specified by NAVSEA, which must include a secondary containment boundary. Technical data referenced is incomplete, but suppliers are responsible for meeting all performance and design criteria associated with the item. The solicitation issued on July 26, 2026, with responses due by August 6, 2026, falls under NAICS code 335931 and is administered by the Department of Defense’s Active Devices Division.

Current-Carrying Wiring Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

TRANSFORMER, POWERThis contract solicits the procurement of 19 power transformers identified by NSN 5950-00-686-1685 under solicitation SPE7M5-26-T-352P, with a total small business set-aside designation and a required delivery within 46 days of award. The item is classified as a restricted source requiring engineering source approval from the government design control activity, and all offers must comply with detailed technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. Offerors must submit comprehensive documentation per MIL-T-31000 including full manufacturing drawings, detailed process and inspection sheets, identification of critical process suppliers including forgings and castings, purchase order copies if available, and a shock extension report compliant with MIL-S-901 and DI-ENVR-80706. If original equipment manufacturer drawings are unavailable, an engineering analysis report must be provided detailing the development methodology, and if reverse engineering was employed, a full disclosure of procedures, sample counts, measurement techniques, collected data, and justifications for dimensional deviations and acceptance criteria must be included and submitted to the engineering support activity. The solicitation responds to purchase request 7016086144 and is issued under NAICS code 334413 by the Department of Defense’s Active Devices Division with performance located in San Diego, California, and primary point of contact Mark Bayless.

Semiconductor and Related Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

CONNECTOR, PLUG, ELECTRIThe contract involves the procurement of two electrical plug connectors with NSN 5935-01-185-5818 under solicitation SPE7M5-26-T-352M, issued by the Department of Defense’s Active Devices Division. Delivery is required within 165 days of award, with the place of performance designated as Tracy, California, 95304-5000. The solicitation was posted on July 26, 2026, with responses due by August 6, 2026, and is open for federal procurement under NAICS code 334417. All technical and quality requirements referenced by R or I numbers must be interpreted from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Physical identification and marking of the item must comply with RQ017, and any government identification on non-accepted supplies must be removed per RQ011. The alternate offeror must submit a complete data package covering both the approved and alternate part. Primary point of contact is Brittany Luster, reachable via email and phone listed in the contract data.

Electronic Connector Manufacturing

POSTED

about 19 hours ago

DEADLINE

MICROCIRCUIT, LINEARThis contract is for the procurement of a linear microcircuit, specifically the Texas Instruments LM35DT part under NSN 5962-01-522-4952, with a quantity of four units to be delivered within 116 days FOB origin. The item is classified as a critical application component and falls under Federal Supply Class 5962 for electronic microcircuits. Strict compliance is required with multiple DLA technical and quality requirements, including supply chain traceability documentation retention per Procurement Note C03, mandatory use of qualified suppliers and testing facilities listed in the QSLD and QTSL, and adherence to DLA packaging standards per MIL-STD-2073-1E and RP001. All components must be marked in accordance with IPC/JEDEC J-STD-609 to identify lead finish attributes, and each unit package must bear proper identification including CAGE and part number from an authorized manufacturer. The contractor must ensure ESD and EMI protection using MIL-PRF-81705 certified materials from qualified manufacturers listed on QPL-81705, with cushioning meeting A-A-59136 density and thickness specifications or using form-fitting ESD protective containers. Mercury and mercury-containing compounds are prohibited except for specifically exempted applications outlined in NAVSEA 5100-003D. Traceability and test documentation must be submitted at least 15 days prior to delivery via email under strict formatting rules, including file size limits and naming conventions, and must match exactly what is included in the shipment. Shipping is only authorized after written confirmation from the contract administrator, and failure to comply with documentation, marking, or packaging requirements voids payment. The item must be delivered to the designated DLA distribution center in Columbus, Ohio, with all packaging and marking conforming to MIL-STD-129, and the contractor must maintain cybersecurity compliance through a CMMC Level 2 self-assessment.

Semiconductor and Related Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

CONTACT, ELECTRICALThis contract pertains to the procurement of electrical contacts under NSN 5999-00-038-0908, with a quantity of two units to be delivered within 20 days to the USS GETTYSBURG CG 64 at FPO AA 34091. The items are required to comply with strict technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with packaging governed by MIL-STD-2073-1E and marking adhering to MIL-STD-129. Delivery is FOB destination with zero variance allowed, and inspection and acceptance occur upon arrival. Mercury and mercury-containing compounds are strictly prohibited in all aspects of the hardware, preservation, packaging, and marking except for specific functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents authorized by NAVSEA, with portable mercury-containing devices requiring shockproof construction and a secondary containment barrier as per NAVSEA 5100-003D. The contract references DLA packaging, shipping, and hazardous materials procedures, with transportation guidelines tied to DLAD Proc Notes C19 and C20. The solicitation number is SPE7M5-26-T-352V, with a response deadline of August 6, 2026, and an original required delivery date of July 22, 2026. The contracting office is under the Department of Defense’s Active Devices Division, with Margaret Smith as the primary point of contact. The unit of issue is each, with a unit price of $2.00 and a total price of $4.00.

Current-Carrying Wiring Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

RELAY, ELECTROMAGNETThis contract is for the procurement of 39 electromechanical relays, part number SAH159, with NSN 5945-01-455-4496, under solicitation SPE7M5-26-T-353A, issued by the Department of Defense’s Active Devices Division as a total small business set-aside. The item is designated as a critical application component and must comply with stringent technical and quality standards referenced from the DLA Master List, including packaging requirements per MIL-STD-2073-1E and marking per MIL-STD-129. The contractor must apply lead-free component identification markings in accordance with IPC/JEDEC J-STD-609 on each unit package, with precise placement as specified in the standard. The delivery is set for FOB origin, with inspection and acceptance occurring at the destination, and no quantity variance is permitted. Packaging must adhere to DLA-specific guidelines including palletization, internal container codes, and unique packaging identifiers. The unit price is $39.00, totaling $1,521, with a delivery deadline of 494 days from the award, originally due by December 7, 2026, though the required ship date is August 11, 2025. All shipments must be sent to DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, following transportation directives C19 and C20. The contract requires strict adherence to labeling, traceability, and compliance protocols to ensure suitability for military applications.

Relay and Industrial Control Manufacturing

POSTED

about 19 hours ago

DEADLINE

MICROCIRCUIT, DIGITALThis contract specifies the procurement of a digital microcircuit identified by NSN 5962-01-284-1531 and part number TIBPAL20R4-20MJTB from Texas Instruments Incorporated, with a quantity of two units to be delivered within 184 days under solicitation SPE7M5-26-T-352Q. The item is classified under Federal Supply Class 5962 for electronic microcircuits and designated as a commercial item, with procurement governed by stringent quality and traceability standards including compliance with DLA Master List technical requirements, Qualified Suppliers List and Qualified Testing Suppliers List for semiconductors, and mandatory supply chain documentation retention as outlined in DLA Procurement Note C03. The contractor must maintain full traceability of parts through documentation submitted via DLA Land and Maritime Form 918, which must be emailed to the designated address at least 15 days before delivery and receive written authorization prior to shipment. Each shipment must include a printed copy of this form and the authorization, and failure to comply renders shipment and payment invalid. The items must be marked in accordance with IPC/JEDEC J-STD-609 to indicate lead finish and packaging must meet MIL-STD-129 and MIL-STD-2073-1E with specific cushioning requirements per A-A-59136, including a minimum density of 1.7 pounds per cubic foot and cushion thickness exceeding component lead length by at least one-eighth inch, or use of form-fitting ESD containers. Electrostatic Discharge and Electromagnetic Interference protection is required using only DOD-qualified MIL-PRF-81705 barrier materials sourced from QPL-81705 approved manufacturers, with all handling performed at certified workstations. The destination for delivery is DLA Distribution in Columbus, Ohio, with inspection and acceptance occurring at destination, zero variance allowed in quantity, and FOB origin shipping terms. The contract applies Cybersecurity Maturity Model Certification Level 2 self-assessment requirements and prohibits the return of surplus material.

Semiconductor and Related Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

TRANSISTORThis contract is for the procurement of transistors identified by NSN 5961013389310 and part numbers from BAE Systems, Keysight Technologies, and Semiconductor Components Industries, with a total quantity of 200 units to be delivered FOB origin within 43 days. The items are classified as commercial off-the-shelf (COTS) and designated as critical application components requiring strict compliance with DoD technical and quality standards referenced in the DLA Master List. The contractor must adhere to DLA packaging requirements mandated by MIL-STD-2073-1E and MIL-DTL-19491, with all units marked in accordance with MIL-STD-129 and the IPC/JEDEC J-STD-609 standard for lead finish identification on individual unit packs. Traceability documentation must be retained per DLA Procurement Note C03, and suppliers must be included on the Qualified Suppliers List for FSC 5961 and 5962 as per Procurement Note M01. The use of ozone-depleting chemicals is strictly prohibited, and mercury or mercury-containing compounds are banned except for specific functional applications in batteries, instruments, and weapon systems as defined by NAVSEA, with additional containment requirements for portable devices. All deliveries must be shipped to the DLA Distribution Depot at Hill AFB, Utah, with inspection and acceptance occurring at destination and no variance allowed in quantity. The contract further prohibits the inclusion of covered defense information without proper safeguards and requires compliance with transportation guidelines outlined in DLAD Procurement Notes C19 and C20.

Semiconductor and Related Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

CONNECTOR BODY, PLUGThe contract encompasses the procurement of 41 units of a CONNECTOR BODY, PLUG, identified by NSN 5935-01-444-9281 and part number 942-011NF40-56S from GLANAIR, INC., under solicitation SPE7M5-26-T-353M. Delivery is required within 165 days from award, with FOB Origin terms and inspection and acceptance occurring at the destination, specifically the DLA Distribution facility in New Cumberland, Pennsylvania. The unit price is $41.00, resulting in a total value of $1,681.00 for the base quantity. Packaging must strictly comply with MIL-STD-2073-1E, including preservation method 41, unit container D3, intermediate container E5, and packaging code U, while marking adheres to MIL-STD-129 with no special marking required. Palletization follows DLA’s RP001 requirements, and hazardous material handling is governed by IP025, with explicit prohibition against intentional inclusion of mercury or mercury-containing compounds except in functional applications like batteries, fluorescent lights, sensors, controls, weapon systems, or NAVSEA-specified reagents, all of which require a secondary containment under NAVSEA 5100-003D. The contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, and mandates removal of government identification from non-accepted supplies and physical marking of bare items as per RQ011 and RQ017. All supplies must be shipped via the designated freight address, and invoicing must be submitted electronically through Wide Area WorkFlow. The solicitation is subject to multiple FAR and DFARS clauses including cybersecurity safeguards, trafficking in persons, employment eligibility verification, sustainable products, hazard communication, and safeguarding covered defense information. Offerors must hold a valid Unique Entity ID and CAGE code, and small businesses must self-certify their socioeconomic status in SAM. The contract includes clauses requiring compliance with equal opportunity, whistleblower protections, and restrictions on acquisition of covered telecommunications equipment, with deviations applied to certain clauses for this procurement. The procurement is non-set aside and the source selection methodology is unspecified.

Electronic Connector Manufacturing

POSTED

about 19 hours ago

DEADLINE

RESISTOR, FIXED, FILMThis contract pertains to the procurement of a fixed film resistor identified by NSN 5905007289589 and part number RNC60H1240FS, governed by MIL-PRF-55182/1R Revision R dated 08/15/2024. The item is classified as a commercial item and must comply with all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. It is subject to strict prohibitions on the use of ozone-depleting substances and mercury or mercury-containing compounds, with limited exceptions for specific functional applications like batteries and sensors. The resistor is designated as an electrostatic discharge (ESD) sensitive device and requires compliance with MIL-PRF-81705 Type I and Type III barrier materials for both ESD and EMI protection. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, including special marking code ZZ and IPC/JEDEC J-STD-609 lead finish markings. Suppliers must possess an ANSI/ESD S20.20-compliant ESD control program, certified ESD workstations, approved packaging materials, and trained personnel to ensure proper handling and packaging at approved facilities. No waivers or deviations to these requirements are permitted. The item is to be delivered FOB origin in a quantity of 18 units with zero variance within 69 days of contract award, and must be shipped to Robins Air Force Base, Georgia. The solicitation requires full and open competition, and all packaging and preservation must also comply with preservation method GX, prohibiting mercury in any preservation, packaging, or labeling processes.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 19 hours ago

DEADLINE

CONNECTOR, PLUG, ELECThe contract is for a qualified electrical plug connector designated as D38999/26ME35SA, compliant with MIL-DTL-38999/26G and MIL-DTL-38999N specifications, and listed on the Qualified Products List for Federal Stock Class 5935. The item is subject to strict technical and quality requirements as defined in the DLA Master List, and packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards with no special marking required. The contract specifies a quantity of 38 units at $38.00 per unit, totaling $1,444.00, with a delivery requirement within 151 days FOB origin. The item is to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, and must meet all DLA packaging and transportation directives including parcel post addressing and palletization rules. The contract was issued under solicitation SPE7M5-26-T-353B with a response deadline in August 2026 and an original delivery requirement of December 24, 2026, though the need ship date has been updated to January 5, 2027. The contract enforces zero variance in quantity, with inspection and acceptance occurring at the destination, and is managed by the Department of Defense’s Active Devices Division with contact information provided for procurement inquiries.

Electronic Connector Manufacturing

POSTED

about 19 hours ago

DEADLINE