Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Demolition and Site Preparation

Active

International

Response Deadline08/31/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the complete removal and proper disposal of existing precast patio stones and granular base materials across 25 units, with all associated site clearing and preparation activities required to ready the areas for new concrete installation. This work encompasses the dismantling, hauling, and environmentally compliant disposal of all existing materials to ensure the site is fully prepared for subsequent construction phases. The scope is focused solely on demolition and site preparation with no mention of new concrete pouring or finishing included within this agreement. Issued by the Department of National Defence under the Government of Canada, this subcontract is classified under NAICS code 238990 and was posted on August 5, 2026, with a response deadline of August 31, 2026. The work must be performed at an unspecified location under the jurisdiction of the Canadian government, with no further details provided on site specifics or point of contact. Interested parties must submit proposals by the stated deadline to be considered for this procurement opportunity.

General Info

Remove and dispose of precast stones and granular base across 25 units for site prep before concrete installation.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

238990 - All Other Specialty Trade ContractorsView NAICS

Place of Performance

CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 5

subcontract

Response DeadlineAug 31

Submission deadline

Response Deadline

08/31/2026, 07:00:00 PM UTCin 24 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → Department of National Defence

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → Department of National Defence

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Removal and disposal of existing precast patio stones and granular base materials at 25 units, including site clearing and preparation for new concrete work.

Similar Contracts

Same NAICS industry code

Demolition and Disposal of Existing Boiler System

Northlands Job Corps Center /ETR

POSTED

about 9 hours ago

DEADLINE

Pre-Installation CleaningThe contract under the title Pre-Installation Cleaning requires the use of hydro-jetting techniques to thoroughly clean sanitary sewer lines in preparation for cured-in-place pipe (CIPP) lining. The primary objective is to ensure optimal surface adhesion and maintain the structural integrity of the sewer system by removing debris, scale, roots, and other obstructions that could compromise the effectiveness of the subsequent lining process. All work must comply with industry standards to guarantee long-term performance and minimize future maintenance needs. This subcontract is targeted toward Minority Business Enterprise (MBE) firms certified by the National Minority Supplier Development Council, with no federal set-aside provisions. The naics code 238990 classifies the work under Other Specialty Trade Contractors, reflecting specialized sewer rehabilitation services. The solicitation was posted on August 7, 2026, with responses due by August 20, 2026. The contract is administered by SAK Construction, LLC, and the work is to be performed at a location on Potomac Drive in Caseyville Township, Illinois, as indicated by the provided online link.

SAK Construction, LLC

POSTED

about 9 hours ago

DEADLINE

Traffic Striping and Pavement Marking

POSTED

about 13 hours ago

DEADLINE

in about 1 month

On-Site Banner Installation Services

University of Houston – Clear Lake

POSTED

about 16 hours ago

DEADLINE

Retaining Wall with Top RailsPaulding County Government is procuring a subcontract for the construction of a retaining wall with integrated safety rails installed along the top, requiring skilled masonry work and comprehensive drainage system installation to ensure structural integrity and long-term performance. The project is solicited under NAICS code 238990, indicating it falls under other miscellaneous construction activities, and is open for responses until September 4, 2026, at 3:00 PM local time, with the solicitation posted on August 6, 2026. The work will be performed within Georgia, though specific location details are not provided, and the contract does not include any set-aside designations for small businesses or other classifications. All proposals must meet technical specifications for materials, safety standards, and drainage requirements as implied by the scope, and submissions should be directed through the official Georgia procurement portal linked in the notice.

Paulding County Government

POSTED

about 17 hours ago

DEADLINE

Demolition and Site PreparationThe contract titled Demolition and Site Preparation involves the complete removal of existing structures, including all debris hauling and thorough site clearing to prepare the area for future development. This subcontract is issued by Paulding County Government in Georgia under NAICS code 238990, which classifies it as other specialized construction activities. The solicitation was posted on August 6, 2026, with a firm response deadline of September 4, 2026, at 3:00 PM Eastern Time. The work is to be performed at an unspecified location within Paulding County, and all parties must adhere to the requirements for full demolition, safe removal of materials, and comprehensive site preparation as outlined in the solicitation. No set-aside provisions are designated for this opportunity, and interested contractors must submit their proposals through the provided online portal before the deadline.

Paulding County Government

POSTED

about 17 hours ago

DEADLINE

Exterior Doors and Windows Supply & InstallationThe contract is for the supply and installation of new exterior doors and windows to replace units damaged by storms on storage sheds under the jurisdiction of the Georgia State Financing and Investment Commission. The work falls under NAICS code 238990, indicating it involves other specialty trade contractors, and is structured as a subcontract opportunity with no set-aside designation. The solicitation was posted on August 6, 2026, and responses are due by September 9, 2026, at 7:00 p.m. The project location and detailed site information are not specified in the metadata, but the performance is tied to storage sheds within Georgia. Interested parties must submit proposals through the official Georgia procurement portal, with no point of contact provided for inquiries.

Georgia State Financing and Investment Commi

POSTED

about 17 hours ago

DEADLINE

in about 1 month

Civil and Site Work for Pump Access and ContainmentThe contract involves comprehensive civil and site work to gain access to and replace drywell pumps, requiring excavation, shoring, and demolition activities followed by full site restoration. All phases must include dewatering and erosion control measures to ensure environmental compliance and worker safety during the process. The scope is focused on enabling safe and effective pump maintenance while minimizing disruption to surrounding infrastructure and ecosystems. Issued by the Ontario Clean Water Agency under the Government of Ontario, this subcontract is classified under NAICS code 238990 for other specialty trade contractors. The opportunity was posted on August 6, 2026, with bids due by August 31, 2026, at 4:00 PM. No set-aside provisions are specified, and performance will occur at an undefined location within Ontario. Interested parties must respond through the designated Ontario tendering portal before the deadline to be considered.

Ontario Clean Water Agency

POSTED

about 18 hours ago

DEADLINE

Well Rehabilitation and DevelopmentThe contract titled Well Rehabilitation and Development seeks to clean, jet, and develop a well to restore or enhance its yield by eliminating obstructions such as sand, scale, biofouling, or sediment. This work is critical to ensuring the well operates at optimal capacity and maintains long-term functionality. The scope involves specialized techniques and equipment to effectively remove debris and buildup that hinder water flow, with the goal of improving overall performance and output. This is a subcontract opportunity issued by the County of Maui in Hawaii, classified under NAICS code 238990 for other miscellaneous construction activities. The solicitation was posted on August 6, 2026, with a response deadline set for August 26, 2026. Performance is expected to take place within the County of Maui, though specific location details are not provided. The contract does not specify a set-aside type or organizational eligibility, and no point of contact information is listed. Interested parties must submit proposals through the provided public procurement portal before the deadline.

POSTED

about 19 hours ago

DEADLINE

Well Pump and Motor RemovalThe contract involves the removal of an existing submersible well pump, motor, column pipe, power cable, and all related appurtenances from the well bore. This work must be performed in accordance with standard industry practices to ensure safe and complete extraction without damage to the well structure or surrounding environment. All materials and components removed must be properly handled and disposed of in compliance with applicable regulations. The project is solicited as a subcontract under NAICS code 238990 and is issued by the County of Maui in Hawaii, with responses due by August 26, 2026. The location of performance is within the County of Maui, though specific site details are not provided in the contract data. Contractors must be prepared to coordinate field logistics and meet all safety and regulatory requirements for well decommissioning activities.

POSTED

about 19 hours ago

DEADLINE

Site Restoration and Trench RemediationThe contract pertains to site restoration and trench remediation activities following utility installation, specifically focusing on post-installation surface restoration at bore entry and exit points to comply with City of Albany standards. This includes compaction of disturbed ground, paving patching to restore road surfaces, and implementing erosion control measures to prevent soil displacement and environmental degradation. All work must adhere to municipal specifications to ensure long-term stability and public safety. The contract is classified as a subcontract under NAICS code 238990 and is issued by the City of Albany through the Georgia Department of Administrative Services. Bidders must submit responses by September 8, 2026, and the work is to be performed within the jurisdiction of the City of Albany, though the exact location details are not specified. The solicitation is publicly accessible through the state’s procurement portal for interested parties to review requirements and submit proposals.

POSTED

about 19 hours ago

DEADLINE

in about 1 month

Striping and Pavement MarkingThe contract calls for the application of a thermoplastic solid white traffic stripe, 24 inches wide, spanning a total length of 130 linear feet, as part of pavement marking work under the NAICS code 238990. The work is to be performed as a subcontract under the City of Hawkinsville in Georgia, with a posted date of August 6, 2026, and a response deadline of September 11, 2026, at 8:00 PM. No specific location details beyond the state are provided, and no set-aside classification or point of contact information is included. The solicitation is accessible through the Georgia Department of Administrative Services portal.

City of Hawkinsville

POSTED

about 19 hours ago

DEADLINE

in about 1 month

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

Military Materiel Delivery and Logistics (DDP Terms)

Freight Transportation Arrangement

POSTED

DEADLINE

Controlled Goods Program (CGP) Compliance and Export Control Support

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Shock Testing Certification for Equivalent Parts

Testing Laboratories and Services

POSTED

DEADLINE

Hazardous Materials Packaging and Labeling

Environmental Consulting Services

POSTED

DEADLINE

Bar Code Labeling and UCC/EAN-128 Compliance

Commercial Lithographic Printing

POSTED

DEADLINE

Military-Grade Packaging and Preservation Services

Sanitary Paper Product Manufacturing

POSTED

DEADLINE

Quality Assurance and Inspection ServicesThe contract requires independent inspection, testing, and documentation services to ensure hose assemblies comply with ISO 9001 quality standards, verified shelf life, precise dimensional tolerances, and National Stock Number (NSN) specifications. All activities must result in the issuance of official conformance reports confirming adherence to these technical and regulatory requirements. The work is part of a subcontract under the Government of Canada’s Department of National Defence, with performance expected to occur in British Columbia and Nova Scotia. The solicitation was posted on August 6, 2026, and responses are due by August 20, 2026. The North American Industry Classification System code for this contract is 541380, indicating it pertains to other scientific and technical consulting services.

Testing Laboratories and Services

POSTED

DEADLINE

Specialized Packaging and Labeling ServicesThe contract requires the provision of compliant packaging, labeling, and marking services for military hose assemblies tailored to Canadian Forces standards, ensuring all materials meet strict operational and logistical requirements. This includes the application of durable bar codes, shelf life indicators, and controlled goods markings to facilitate traceability, inventory management, and regulatory compliance throughout the supply chain. All work must adhere to mandated military packaging protocols to ensure durability, environmental resistance, and readiness for deployment in operational environments. The contract is classified as a subcontract issued by the Department of National Defence under the Government of Canada, with performance expected to occur in British Columbia and Nova Scotia. The solicitation was posted on August 6, 2026, and responses are due by August 20, 2026. The North American Industry Classification System code 323113 indicates the work falls under printing and related support activities, emphasizing the technical precision required in label and marking production. Participation is open without set-aside restrictions, and full compliance with government specifications is non-negotiable to ensure alignment with defense logistics systems.

Commercial Screen Printing

POSTED

DEADLINE

Nonmetallic Hose Assembly SupplyThe contract involves the manufacture and delivery of custom nonmetallic hose assemblies designed for fuel oil service systems on HFX-Class naval vessels, with strict adherence to military specifications. Each assembly must meet rigorous quality and performance standards, including full traceability from raw materials to final product, mandatory bar coding for inventory and logistics tracking, compliance with defined shelf life requirements, and military-grade packaging to ensure durability during transport and storage. The hoses are critical components in naval operations and must be produced under quality control systems that support defense readiness and long-term system reliability. Submissions are due by August 20, 2026, and the contract is structured as a subcontract under the Department of National Defence of the Government of Canada. The work is to be performed at locations in British Columbia and Nova Scotia, reflecting the geographic scope of naval support infrastructure. The NAICS code 332994 identifies this as a specialty manufacturing activity focused on other fabricated metal product manufacturing, indicating specialized production capabilities are required. Participation is open to qualified suppliers capable of meeting defense-grade technical and compliance demands without set-aside restrictions, and all submissions must align with the procurement framework administered through CanadaBuys.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

Delivery and Installation of Test EquipmentThe contract entails the local delivery and on-site installation of oscilloscopes and multimeters at DRDC Atlantic in Nova Scotia, with responsibilities including unboxing, proper setup, and basic operational verification to ensure the equipment is fully functional upon completion. All work must be performed at the designated government facility, and the contractor is expected to handle logistics and technical installation without requiring additional support from the client beyond access and site coordination. The task is classified as a subcontract under NAICS code 484121, reflecting its focus on specialized transportation and installation services for technical equipment. The solicitation was posted on August 6, 2026, with responses due by August 13, 2026, at 11 PM, indicating a short, time-sensitive window for submissions. The contract is issued by the Department of National Defence on behalf of the Government of Canada, and while specific contact details are not provided, all deliverables must align with federal procurement standards and be completed at the specified location in Nova Scotia. The agreement does not include set-aside provisions, meaning any qualified vendor may bid, but success will depend on demonstrating reliable logistics capabilities and technical expertise in handling sensitive test equipment within a government research environment.

General Freight Trucking, Long-Distance, Truckload

POSTED

DEADLINE

Supply of Digital MultimetersThe Government of Canada, through the Department of National Defence and specifically DRDC Atlantic in Nova Scotia, is seeking suppliers to procure and deliver calibrated digital multimeters for use in precision electrical testing within research and development environments. The contract is structured as a subcontract and requires equipment that meets strict calibration standards to ensure accuracy and reliability in scientific and engineering applications. All multimeters must be supplied ready for immediate deployment, with documentation verifying calibration tracesability to recognized national or international standards. Delivery must be completed by the response deadline of August 13, 2026, with procurement governed under NAICS code 334516, which categorizes the manufacturing of electrical measurement and testing equipment. The opportunity is open to qualified vendors who can demonstrate capacity to meet technical specifications, timely delivery, and compliance with government procurement protocols, though no set-aside provisions are specified. The tender notice is publicly accessible through Canada Buys, with no point of contact listed, indicating bids must be submitted in accordance with standard procurement procedures.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Supply of Tektronix MDO34 OscilloscopesThe Government of Canada, through the Department of National Defence and specifically DRDC Atlantic in Nova Scotia, is seeking to procure multiple Tektronix MDO34 mixed-domain oscilloscopes to support advanced sensor development, system integration, and communication protocol debugging activities. These instruments are essential for capturing and analyzing electrical signals alongside RF and protocol data, enabling precise troubleshooting and validation of complex electronic systems in military and defense applications. The contract is structured as a subcontract under NAICS code 334515, indicating procurement of test and measurement equipment manufacturing services, with a response deadline of August 13, 2026, and the opportunity posted on August 6, 2026. Delivery is required at DRDC Atlantic's location in Nova Scotia, and while no specific set-aside provisions are noted, the procurement is open to eligible suppliers responding to the tender notice through the CanadaBuys portal.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

DEADLINE