Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Demolition of Existing Perimeter Wall

Active

Federal

Response Deadline08/17/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the complete demolition and removal of an existing perimeter wall at the US Embassy in Lilongwe, with full responsibility for hauling away all debris and conducting thorough site clearing to restore the area. This work is classified as a subcontract under NAICS code 238990, which covers other specialty trade contractors, and is solicited by the US Embassy Lilongwe, though the listed agency organization incorrectly references the International Boundary and Water Commission: US-Mexico, suggesting a possible data error. The solicitation was posted on July 29, 2026, with a response deadline of August 17, 2026, and all performance activities are to occur exclusively at the embassy’s location in Lilongwe, Malawi. No specific set-aside status or point of contact information is provided, and the contract is not tied to any federal agency or geographic detail beyond the city of performance.

General Info

Demolish and remove perimeter wall at US Embassy Lilongwe, haul debris, clear site, NAICS 238990, deadline August 17, 2026.

Agency

International Boundary And Water Commission: Us-Mexico → US Embassy LilongweView Agency

NAICS

238990 - All Other Specialty Trade ContractorsView NAICS

Place of Performance

Lilongwe, DC, MWI

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 29

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 12:00:00 PM UTCin 18 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyInternational Boundary And Water Commission: Us-Mexico → US Embassy Lilongwe

ContactsNo contacts available

OfficeN/A

Organization / Agency

International Boundary And Water Commission: Us-Mexico → US Embassy Lilongwe

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Complete removal and disposal of the current perimeter wall, including debris hauling and site clearing.

Similar Contracts

Same NAICS industry code

Accessibility Compliance & ADA-Compliant ConstructionThe contract calls for the design and construction of fully accessible infrastructure elements including routes, entrances, restrooms, signage, and parking areas, all must meet exacting compliance standards under the Americans with Disabilities Act and the Architectural Barriers Act. Work must be executed to ensure universal accessibility, with precise attention to dimensions, clearances, materials, and operational features prescribed by these federal guidelines. The project is structured as a subcontract under the NAICS code 238990 for other specialized construction activities, and performance is expected to be completed at a location identified by the zip code 39855. The solicitation was posted on July 29, 2026, with a submission deadline of August 30, 2026, at 4:00 a.m. Eastern Time. The contracting entity is identified as W2SD Endist New York under the Department of Defense, indicating this effort supports a federal facility or installation. There is no set-aside designation specified, meaning any qualified contractor may bid. All work must adhere strictly to accessibility mandates, with no tolerance for noncompliance, and contractors are expected to demonstrate technical expertise in ADA and ABAAS implementation, including potential coordination with inspection authorities and documentation of compliance measures throughout the project lifecycle.

W2SD Endist New York

POSTED

about 15 hours ago

DEADLINE

in about 1 month

SDVOSB Set-Aside PerformanceThe contract is a subcontract under a Service-Disabled Veteran-Owned Small Business set-aside, requiring the prime contractor to perform at least 75 to 85 percent of the work directly, with strict limitations on subcontracting to ensure compliance with VA SDVOSB regulations. The North American Industry Classification System code 238990 indicates the work involves other specialty trade contractors, and the performance location is designated as Tampa, Florida, with a response deadline of August 6, 2026, at 4:00 PM. The contract was posted on July 29, 2026, and is managed by the Department of Veterans Affairs through the 248-NETWORK Contract Office 8, with the award intended solely for eligible SDVOSBs meeting federal standards under FAR 19.14.

248-NETWORK Contract Office 8 (36C248)

POSTED

about 15 hours ago

DEADLINE

Site Safety and Fall Protection ServicesThe contract awards temporary fall protection systems, safety monitoring, and comprehensive site safety compliance oversight specifically for roof work activities. Services include the installation and maintenance of guardrails, warning lines, and personal fall arrest systems to ensure worker safety during elevated tasks. All work must adhere to federal safety standards, with continuous monitoring to enforce compliance and mitigate fall hazards. This is a Small Business Set Aside under the SBA, restricted to qualified small businesses, and falls under NAICS code 238990 for other construction support activities. The solicitation was posted on July 29, 2026, with proposals due by August 14, 2026, and the work is to be performed under the Department of the Interior through its agency Gaoa Fws. The contract is structured as a subcontract and does not specify a physical location beyond the general scope of roof work requiring safety systems.

POSTED

about 15 hours ago

DEADLINE

General Demolition and Site PreparationThe contract encompasses selective demolition, debris removal, and site preparation services at military facilities under the Department of Defense, specifically managed by FA5209 374 Cons Pk. Work is to be performed in Fussa and is classified as a subcontract under NAICS code 238990, which covers other specialized construction activities. The opportunity was posted on July 29, 2026, with a response deadline of August 17, 2026, at 2:00 AM, indicating a tight timeline for potential contractors to submit proposals. The contract does not specify a set-aside designation or organizational type requirements, suggesting it is open to general subcontractors with appropriate capabilities. All activities must comply with military facility standards and safety protocols, and work will likely require coordination with existing installations to ensure operational continuity and security. The official solicitation can be accessed via the provided SAM.gov link for further submission details.

FA5209 374 Cons Pk

POSTED

about 15 hours ago

DEADLINE

Facility Maintenance and Repair ServicesThe contract seeks providers to perform routine and corrective maintenance services across U.S. Air Force installations in Japan, covering a broad range of building systems and infrastructure including HVAC, plumbing, electrical, roofing, and general repairs. Work will be conducted primarily at the Fussa location and requires consistent, reliable service to ensure operational readiness and safety of military facilities. The solicitation is classified as a subcontract under NAICS code 238990, indicating it is for other miscellaneous building completion services, and is open for responses until August 17, 2026. The contracting agency is the Department of Defense, specifically FA5209 374 Cons Pk, and the opportunity was posted on July 29, 2026, with all submissions required to meet the stated deadline. This contract does not specify a set-aside type, and performance is expected to meet military standards for facility sustainment.

FA5209 374 Cons Pk

POSTED

about 15 hours ago

DEADLINE

Grit Chamber Inspection & Cleaning ServicesThe contract titled Grit Chamber Inspection & Cleaning Services covers scheduled and emergency maintenance of grit chambers, requiring thorough removal of sediment and debris with full documentation for proper disposal. Work must be performed at Patrick Air Force Base and includes both routine inspections and urgent response tasks to ensure operational integrity and compliance with environmental standards. The solicitation is classified as a subcontract under NAICS code 238990, with a response deadline of August 12, 2026, and was posted on July 29, 2026. The contract is administered by the Department of Defense through the FA2521 45 Cons Pk office, though no specific point of contact or set-aside details are provided. All contractor activities must adhere to strict reporting requirements for waste handling and disposal to meet federal and military regulatory expectations.

FA2521 45 Cons Pk

POSTED

about 15 hours ago

DEADLINE

ICRA Containment Barrier InstallationThe contract requires the installation of temporary STARC panels or equivalent containment systems to ensure infection control standards are met during construction activities, specifically maintaining a minimum four-foot clearance in hallways to allow safe passage and prevent the spread of contaminants. This work is critical for protecting patient health and operational continuity in healthcare environments, with strict adherence to regulatory guidelines for airborne isolation and construction site containment. The project is tied to a facility in Minneapolis with a zip code of 55417, and all work must be completed in compliance with infection control protocols established for medical facilities during renovation or construction phases. This subcontract opportunity is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses as defined under FAR 19.14, with the NAICS code 238990 indicating it falls under miscellaneous specialty trade contractors. The solicitation was posted on July 29, 2026, and responses are due by August 3, 2026, at 7:00 PM. The contracting office is the Department of Veterans Affairs through Network Contract Office 23, and the work must be performed at the designated location in Minneapolis. While specific performance timelines and technical specifications for the containment systems are not outlined here, bidders are expected to demonstrate capability in deploying certified temporary barriers that meet or exceed industry standards for healthcare environments.

Network Contract Office 23 (36C263)

POSTED

about 15 hours ago

DEADLINE

Asbestos Abatement Labor and Project ManagementThe contract entails the complete removal and disposal of asbestos-containing floor tiles and mastic within healthcare facility rooms at a Department of Veterans Affairs location in Durham, North Carolina, with strict adherence to clinical operational schedules and radiation safety protocols. The scope includes establishing compliant containment areas, utilizing wet removal techniques, conducting thorough HEPA vacuuming, and performing comprehensive site cleanup to ensure zero contamination. All work must be executed with precision to maintain the safety of patients, staff, and the surrounding environment while minimizing disruption to healthcare services. The project requires specialized labor and project management to ensure regulatory compliance and operational continuity. This is a service-disabled veteran-owned small business (SDVOSB) set-aside subcontract under NAICS code 238990, exclusively available to qualifying SDVOSB entities. The solicitation was posted on July 29, 2026, with responses due by 2:00 p.m. on July 31, 2026. The contracting office, identified as the 246-NETWORK Contracting Office 6 (36C246), is managing the procurement under the Department of Veterans Affairs. The performance location is firmly established in Durham, with a ZIP code of 27705, and all work must conform to federal asbestos abatement standards while integrating seamlessly within an active healthcare setting.

246-NETWORK Contracting Office 6 (36C246)

POSTED

about 15 hours ago

DEADLINE

Portable Sanitation Units Supply & ServiceThe contract calls for the supply, delivery, placement, and ongoing servicing of forty portable sanitation units for a period of thirty days in Guam, ensuring complete operational readiness throughout the duration. All units must be delivered and made fully functional at the designated location within the agreed timeline, with regular maintenance and sanitation services required to maintain hygiene and functionality under the demanding environmental conditions of the region. The work is classified as a subcontract under a Small Business Set Aside, exclusively reserved for small businesses as defined by the SBA, and falls under the NAICS code 238990 for other specialty trade contractors, indicating specialized non-residential construction or service support capabilities are expected. The solicitation was posted on July 29, 2026, with responses due by August 5, 2026, and the contracting authority is the Department of Defense under the Commanding General. While specific location details within Guam are not provided, performance is expected to occur across the island, requiring the contractor to navigate logistical challenges associated with remote or austere site access. The contract does not list a point of contact or detailed address, suggesting that further coordination will occur post-award, and the procurement is structured to prioritize qualified small businesses capable of executing rapid deployment and sustained service under military or federal operational requirements.

Commanding General

POSTED

about 15 hours ago

DEADLINE

On-Site Installation and Training ServicesThe contract outlines on-site installation and training services for an aerial platform in Yomitan Torii Station, Okinawa, requiring full setup including leveling, comprehensive safety inspections, and operator training for personnel. The work is categorized under NAICS code 238990 and issued as a subcontract by the Department of Defense under the office designation FA5270 18 Cons Pk, with a response deadline of August 10, 2026. All activities must be completed at the designated location in Okinawa, and the contractor is expected to ensure operational readiness through proper equipment calibration and hands-on instruction for end users. The solicitation is open for submission until the specified deadline, and performance is confined to the specified geographic site with no provisions for remote or alternative arrangements.

FA5270 18 Cons Pk

POSTED

about 15 hours ago

DEADLINE

Elevator Preventive Maintenance and Major Repairs Services

Solicitation # W912CN-26-Q-A031

This contract, solicitation W912CN-26-Q-A031, seeks a Firm-Fixed-Price provider to deliver comprehensive elevator and chairlift preventive maintenance, repair, testing, inspection, and certification services across U.S. Army installations on Oahu, Hawaii, primarily at Schofield Barracks. The work is non-personal services in nature, meaning the contractor operates independently without government supervision, but remains fully accountable for meeting all standards outlined in the Performance Work Statement, including compliance with ASME A17.1, ASME A18.1, OSHA, and all federal, state, and local regulations. The contract covers a base period from September 1, 2026, through August 31, 2027, with four optional one-year periods and a potential six-month extension, creating a possible performance period extending to August 2031. The scope includes maintaining a detailed inventory of elevators and chairlifts across UPH barracks and non-UPH administrative facilities, requiring adherence to manufacturer-recommended preventive maintenance schedules and annual test dates as documented in the Technical Exhibits. The contractor must supply all personnel, tools, equipment, parts, and transportation necessary to perform these services, including providing all replacement parts for both Preventive Maintenance Orders and Demand Maintenance Orders. Offerors must submit a complete, non-partial quotation that includes detailed general information such as UEI, CAGE code, SAM.gov registration status, business size classification, and payment terms; a technically acceptable narrative not exceeding ten pages demonstrating understanding of the scope, including certification documentation for the Project Manager and all key technicians—specifically valid Hawaii elevator mechanic licenses and NAESAs Qualified Elevator Inspector certifications—a staffing and management plan capable of handling concurrent task orders across the Garrison, a baseline preventive maintenance schedule mapped to historical test dates, and at least two relevant project examples from the past three years involving similar elevator and chairlift maintenance without modernization. Pricing must be submitted for all contract line items except CLINs 0008–0009 and their options (now renumbered to X010 and X011), which are designated Not-Separately-Priced (NSP) and will be negotiated on a firm-fixed-price basis at the task order level. The total evaluated price includes the base period, all four option years, and the potential six-month extension under FAR 52.217-8, with one-half of the option price added

0413 Aq Hq Rco-Hi

POSTED

about 15 hours ago

DEADLINE

Security fence at Coast Guard Air Station Clearwater Florida

Solicitation # 70Z02826Q0000102

The contract mandates the demolition of approximately 400 linear feet of existing fencing and the installation of approximately 270 linear feet of new 8-foot industrial chain-link fencing with three strands of barbed wire at USCG Air Station Clearwater in Florida, along with two new gates: a 26-foot-wide powered sliding gate with a keypad system for vehicle entry and exit, and a 60-inch-wide non-powered swing gate with a manual cipher lock to accommodate commercial lawn mowers. All existing fence posts and concrete foundations must be fully removed and backfilled, and vehicle relocation during demolition will be coordinated by the unit during the preconstruction meeting. The new fence will not extend beyond a small bridge at the lot corner, and a camera will be installed only at the entrance of the powered gate to monitor vehicle ingress, with no camera required for the pedestrian gate. Work must comply with strict site access protocols: all personnel require government-issued ID and must be vetted with SSN last four digits and citizenship status submitted in advance, and only U.S. citizens and permanent residents are permitted on-site. Work hours are restricted to Monday through Friday, 8 a.m. to 3 p.m., with no weekend or holiday work allowed. The solicitation is a Small Business Set-Aside under NAICS code 238990 with a $19 million size standard and awards to the Lowest Price, Technically Acceptable offeror. The firm-fixed-price contract is subject to simplified acquisition procedures under FAR Part 13, with an anticipated award date of August 28, 2026, and work expected to begin no later than 10 business days after award. Mandatory labor standards under the Davis-Bacon Act require payment of prevailing local wages, and subcontracting is limited to 85% of total work under FAR 52.219-14. Contractors must secure all permits, adhere to OSHA safety standards, and assume full responsibility for site conditions, material quality, and accident prevention. Payment procedures follow FAR 52.232-5, and the contract includes clauses for differing site conditions, material workmanship, and default, among others. A mandatory site visit occurred on July 29, 2026, and all proposals must be submitted electronically to Jerry.Lopez@uscg.mil by 3 p.m. on August 14, 2026. All offerors must maintain an active SAM registration with the

Base MIAMI(00028)

POSTED

about 15 hours ago

DEADLINE

More opportunities from International Boundary And Water Commission: Us-Mexico → US Embassy Lilongwe

Same awarding agency

Supply of Construction MaterialsThe contract entails the supply of critical construction materials including concrete blocks, reinforcement steel, cement, sand, and security lighting fixtures, all of which must comply with British Standards, ASTM specifications, and U.S. Army Corps of Engineers requirements to ensure structural integrity and safety. These materials are essential for infrastructure projects under the jurisdiction of the U.S. Embassy in Lilongwe, with performance obligations centered in Lilongwe, Malawi. The solicitation is structured as a subcontract with a NAICS code of 327320, indicating focus on precast concrete products, and the response deadline is set for August 17, 2026, with the opportunity posted on July 29, 2026. Although the agency listing references the International Boundary and Water Commission: U.S.-Mexico, the actual performance location and client are tied to the U.S. Embassy in Lilongwe, suggesting possible administrative misalignment or a broader coordination framework. No set-aside provisions are specified, and the point of contact details are not provided, requiring interested parties to navigate the SAM.gov portal using the given link for further submission requirements. All suppliers must ensure full compliance with the cited international standards and demonstrate capacity to deliver quantities and specifications aligned with U.S. diplomatic facility construction protocols in a potentially challenging logistical environment.

Ready-Mix Concrete Manufacturing

POSTED

about 15 hours ago

DEADLINE

Restoration and LandscapingThe contract titled Restoration and Landscaping covers post-construction activities including site cleanup, utility repairs, landscape restoration, and repainting of affected surfaces to return the area to its original or approved condition. These services are required following the completion of a construction project at the US Embassy in Lilongwe, with the work intended to mitigate disturbances caused by prior activities and ensure the site meets environmental and aesthetic standards. The solicitation is classified as a subcontract under NAICS code 561730, which corresponds to landscape service activities, and is open for response until August 17, 2026, with the opportunity posted on July 29, 2026. The place of performance is exclusively in Lilongwe, and while the contracting agency is listed as the US Embassy Lilongwe, the overseeing organization is ambiguously referenced as the International Boundary and Water Commission: US-Mexico, suggesting potential administrative or procedural alignment rather than direct project oversight. No set-aside designation is specified, and no point of contact information is provided in the data.

Landscaping Services

POSTED

about 15 hours ago

DEADLINE

Security Lighting InstallationThe contract involves the installation of security lighting at the gate area of the US Embassy in Lilongwe, requiring the supply and installation of all necessary electrical components including conduit, wiring, and weatherproof and vandal-resistant fixtures, with full connection to an established power source. The work must meet stringent durability and safety standards to ensure continuous operation in outdoor conditions and resistance to tampering or environmental wear. This subcontract is issued under NAICS code 238210, which pertains to electrical contracting, and is managed by the International Boundary and Water Commission: US-Mexico on behalf of the US Embassy Lilongwe. The solicitation was posted on July 29, 2026, with a response deadline of August 17, 2026, and performance is expected to occur at the embassy’s location in Lilongwe, Malawi. All materials and workmanship must be selected to withstand local climatic and security challenges, ensuring long-term reliability without frequent maintenance.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 15 hours ago

DEADLINE

Concrete Foundation and Masonry Wall ConstructionThe contract entails the pouring of reinforced concrete footings and the construction of masonry walls using concrete blocks, mortar, and reinforcement, all in strict compliance with British Standard BS 1478 and established quality control standards. Work must be executed to meet specified engineering and durability requirements, ensuring structural integrity and long-term performance under local environmental conditions. The scope is focused on foundational and wall systems critical to the stability and functionality of the facility being developed. Issued as a subcontract by the US Embassy in Lilongwe under NAICS code 238140, the opportunity has a response deadline of August 17, 2026, with a posting date of July 29, 2026. The place of performance is definitively located in Lilongwe, Malawi, and the work is tied to infrastructure projects managed under the International Boundary and Water Commission: US-Mexico, though the physical execution is entirely in Lilongwe. Bidders must be prepared to meet technical, logistical, and regulatory requirements specific to the region while adhering to U.S. federal contracting protocols and international construction benchmarks.

Masonry Contractors

POSTED

about 15 hours ago

DEADLINE

Earthwork and Site PreparationThe contract for Earthwork and Site Preparation involves excavation, grading, and compaction activities necessary to establish a foundation for a new wall, with requirements to implement temporary erosion control measures and dewatering services if environmental conditions necessitate them. All work must adhere to established standards for site stability and environmental protection, ensuring minimal impact on surrounding areas during construction. The project is positioned under NAICS code 238910, indicating specialized site preparation services, and is structured as a subcontract opportunity with no set-aside designation. This opportunity is issued by the US Embassy Lilongwe under the organizational umbrella of the International Boundary and Water Commission: US-Mexico, though the work itself is to be performed in Lilongwe. The solicitation was posted on July 29, 2026, with responses due by August 17, 2026. While no specific point of contact or detailed address information is provided, the place of performance is clearly identified as Lilongwe, and interested parties must access the official SAM.gov link to review full submission requirements and compliance terms.

Site Preparation Contractors

POSTED

about 15 hours ago

DEADLINE

Area 43/270 Perimeter Wall and Gate Replacement

Solicitation # PR16067746

The project involves the complete demolition and reconstruction of the perimeter boundary wall at Area 43/270, accompanied by a range of site upgrades to enhance security and durability. Work initiates with the installation of a temporary iron-sheet fence topped with razor wire to secure the site, followed by removal of the existing wall, clearing of vegetation and roots, and debris disposal. Construction proceeds with excavation to 900mm depth, concrete blinding, and installation of reinforced strip footings, structural columns, and horizontal beams at mid-height and top levels. The wall structure consists of 200mm reinforced hollow blockwork with integrated vertical and horizontal reinforcement, finished with plaster, roughcast, silicone primer, and weatherproof paint, while foundation walls receive bituminous coating for moisture protection. New razor wire is installed along the entire perimeter, including the main gate, which is a custom-fabricated 3.50m x 2.75m sliding vehicle gate with a built-in pedestrian door, heavy-duty hardware, peep hole, and concertina wire, all fabricated to ASTM standards. Additional improvements include brick-lined perimeter drainage with catch pits and uPVC piping, repairs to the guard house covering roof, door relocation, electrical upgrades, and drainage enhancements, restoration of the screen wall, and installation of security lighting at the gate area. Final phases involve comprehensive site cleanup, landscape restoration, utility repairs, and repainting of affected surfaces. All work must strictly adhere to material specifications, testing protocols, and safety regulations including EM 385-1-1, BS, and ASTM codes, with COR oversight ensuring compliance in compaction, concrete quality, and reinforcement installation. The solicitation is issued by the US Embassy Lilongwe under the NAICS code 238140, with responses due by August 17, 2026, and performance location in Lilongwe.

Masonry Contractors

POSTED

about 15 hours ago

DEADLINE

Local Permits, Licensing, and Insurance ComplianceThe contract requires the successful bidder to secure all necessary telecommunications licenses, permits, and regulatory approvals from Malawian authorities to ensure full legal operation within the country. This includes obtaining the Certificate of Insurance and maintaining ongoing compliance with local legal and insurance standards as mandated by Malawian law. The work is tied to the U.S. Embassy in Lilongwe and must be performed on-site in Lilongwe, Malawi, with all deliverables fully aligned with local regulatory expectations. The solicitation is classified as a subcontract under NAICS code 541110, indicating an information services or professional advisory scope, and responses are due by August 10, 2026, with the opportunity posted on July 23, 2026.

Offices of Lawyers

POSTED

DEADLINE

Cybersecurity and Supply Chain Risk Management (C-SCRM) ComplianceThis contract requires full compliance with NDAA Section 889, mandating the exclusion of prohibited telecommunications and video surveillance equipment vendors such as Huawei, ZTE, Kaspersky, and ByteDance from all supply chains. Contractors must complete comprehensive Cybersecurity and Supply Chain Risk Management attestation processes to verify adherence to these restrictions and implement robust controls to prevent the use of non-compliant components in any products or services provided. The obligation extends to ongoing monitoring and documentation to ensure continuous compliance throughout the performance period. The contract is a subcontract under the U.S. Department of State, specifically managed by the US Embassy in Lilongwe, with performance located in Lilongwe, Malawi. It was posted on July 23, 2026, and responses are due by August 10, 2026. The NAICS code 541611 indicates the work involves computer systems design and related services, suggesting the scope includes cybersecurity infrastructure, risk assessments, or secure IT implementations. All parties must ensure their supply chains are free from identified high-risk vendors and maintain audit-ready records to satisfy federal compliance requirements.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Ongoing Network Operations and NOC SupportThe contract outlines ongoing network operations and NOC support services for the US Embassy in Lilongwe, requiring continuous 24x7 monitoring of the internet circuit with strict incident response protocols, including a one-hour response time and four-hour resolution deadline for Priority 1 issues. The scope encompasses comprehensive performance reporting and adherence to agreed SLA benchmarks to ensure uninterrupted connectivity and operational reliability. Services are to be delivered in support of critical diplomatic functions and must meet the highest standards of network stability and responsiveness. This subcontract, classified under NAICS code 541512, is open for response until August 10, 2026, and is positioned for performance at the embassy’s location in Lilongwe. The Department of State is the sponsoring agency, and the work is essential to maintaining secure and efficient communications infrastructure for US government operations abroad. While specific financial details or staffing requirements are not provided, the terms emphasize rigorous service levels and real-time operational oversight to safeguard mission-critical network functions.

Computer Systems Design Services

POSTED

DEADLINE

Dedicated Internet Circuit Provisioning and InstallationThe contract involves the full provision, installation, configuration, and testing of a dedicated 50 Mbps symmetric internet circuit at the CDC offices located in NICO House, Lilongwe. This includes all necessary cabling, the setup and configuration of a router and firewall, and seamless integration with the existing network infrastructure to ensure reliable and secure connectivity. The work must be performed on-site at the specified location with all components meeting performance and security standards required for U.S. government operations. The opportunity is categorized as a subcontract under NAICS code 518210, issued by the U.S. Embassy Lilongwe under the Department of State. The solicitation was posted on July 23, 2026, and responses are due by August 10, 2026. All work must be completed in compliance with U.S. federal requirements for telecommunications infrastructure, and the successful vendor will be expected to deliver a fully functional, high-availability internet service with documented testing and validation prior to handover.

Computing Infrastructure Providers, Data Processing, Web Hosting, and Related Services

POSTED

DEADLINE

Structural Steel Fabrication and ErectionThe contract entails the fabrication and on-site assembly of structural steel components for buildings or bridges under the U.S. Embassy Lilongwe project, managed by the Department of State. Work is to be performed entirely in Lilongwe, with no specified state or zip code for the location, indicating a focus on local on-site execution. The North American Industry Classification System code 332312 confirms the scope covers structural steel fabrication and erection services, requiring precision manufacturing and skilled field assembly to meet engineering standards. Subcontractors are eligible to respond, and all proposals must be submitted by August 11, 2026, with the opportunity posted on July 23, 2026, providing a four-week window for preparation and submission. There is no set-aside designation specified, meaning the contract is open to all qualified entities without preference based on business size or ownership status. All performance obligations must be fulfilled at the designated site in Lilongwe under the oversight of the U.S. Embassy’s infrastructure requirements.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Ready-Mix Concrete SupplyThe contract entails the supply of ready-mix concrete to support construction activities for the U.S. Embassy in Lilongwe, under the Department of State, with all deliveries required to align precisely with project timelines and technical specifications. The work is classified as a subcontract under NAICS code 327320, indicating specialized concrete manufacturing and delivery services, and the place of performance is exclusively in Lilongwe, Malawi, where all materials must be delivered and placed according to established standards. The opportunity was posted on July 23, 2026, with responses due by August 11, 2026, and no set-aside provisions are designated, meaning eligible suppliers of any size may bid. All contractors must ensure compliance with the Embassy’s quality control requirements, timely delivery schedules, and on-site coordination protocols to avoid delays in the construction program. The absence of a designated point of contact or detailed office address suggests that communications will be handled through the embassy’s central procurement channels, and bidders are expected to proactively clarify requirements before submitting proposals. The contract is critical to infrastructure development efforts by the U.S. government in Malawi, and performance will be closely monitored to ensure durability, safety, and adherence to international construction benchmarks.

Ready-Mix Concrete Manufacturing

POSTED

DEADLINE