Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

DHI MIKE 3/21 Hydrodynamic Modeling Specialist

Open

International

Response Deadline12/10/2026, 10:03:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity is for a DHI MIKE 3/21 Hydrodynamic Modeling Specialist to support prime contractors on projects for the Government of Canada's Department of the Environment (ECCC). The selected specialist will be responsible for developing and optimizing mesh and hydrodynamic frameworks using DHI MIKE 3 and MIKE 21 software. A primary technical requirement is the ability to optimize meshes to ensure two-week scenarios can be completed within 24-hour runtimes on agency hardware, with all models verified against physical oceanographic data. The project will be performed in British Columbia, Canada, under NAICS code 541330. Interested parties must demonstrate proven expertise in the DHI MIKE software suite to deliver a fully optimized and verified hydrodynamic framework. The solicitation was posted on November 10, 2026, with a response deadline of December 10, 2026.

General Info

Agency

Government of Canada → Department of the Environment (ECCC )

NAICS

541330 - Engineering Services

Place of Performance

Canada, British Columbia, CAN

Set-Aside

NONE

Documents

This scope was carved out of 5000096055.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Mesh and Hydrodynamic Framework for Shellfish Water Classification Program

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 10

subcontract

Response DeadlineDec 10

Submission deadline

Response Deadline

12/10/2026, 10:03:00 PM UTCin 30 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → Department of the Environment (ECCC )

ContactsNo contacts available

OfficeN/A

Organization / AgencyGovernment of Canada → Department of the Environment (ECCC )

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Develops mesh and hydrodynamic frameworks for prime contractors on Department of the Environment (ECCC) projects. Utilizes DHI MIKE 3 and MIKE 21 software to optimize meshes for two-week scenarios within 24-hour runtimes on agency hardware. Performs model verification against physical oceanographic data. Requires demonstrated expertise in DHI MIKE software suite. Delivers an optimized, verified hydrodynamic mesh and framework.

Similar Contracts

Same NAICS industry code

GLCA 318882 - Provide Lake Access to Bullfrog Area

Solicitation # glca-318882-provide-lake-access-bullfrog-area

The GLCA 318882 project, managed by WW Clyde & Co, involves the design of lake access infrastructure in the Bullfrog Area of Utah. The scope of work includes the design of a 150-foot-wide concrete launch ramp with a 10.5 percent grade servicing water surface elevations between 3450 and 3700. Additionally, the project requires the design of a 16-acre asphalt parking area and a two-lane asphalt access road connecting the parking facility to US 276. This solicitation is set aside for small businesses, including SDVOSB, WOSB, HUBZone, and SDB designations, and specifically includes an Indian Small Business Economic Enterprise requirement. Interested parties must respond by November 12, 2026. The project falls under NAICS code 541330 for engineering services.

POSTED

about 5 hours ago

DEADLINE

in about 20 hours

Business Impact Analysis and Update Disaster Recovery Plan Services – Inland Empire Utilities Agency

Solicitation # business-impact-analysis-update-disaster-recovery-plan-services-inland-empire-utilities-agency

Aanko Technologies Inc. is soliciting certified Disadvantaged Business Enterprise and Small Business Enterprise sub-consultants and suppliers to provide specialized professional services for the Inland Empire Utilities Agency in San Bernardino and Riverside Counties, California. The scope of work focuses on emergency management, business continuity planning, technical writing, data collection, and the updating of IT and disaster recovery plans. Eligible firms should operate under NAICS codes related to administrative management, engineering services, computer systems design, or public relations and technical writing. Interested parties must submit their responses by November 17, 2026. Primary inquiries regarding this opportunity should be directed to Liz Jordan-Wettstein.

Aanko Technologies Inc.

POSTED

about 5 hours ago

DEADLINE

2027-2030 On-Call Engineering and Professional Services

Solicitation # 49733

The City of San Rafael is soliciting Statements of Qualifications from consultants and contractors to establish a pool of qualified firms for on-call engineering and professional services. The scope covers a wide array of disciplines, including civil, structural, electrical, environmental, architectural, and transportation services, among others. The city intends to select up to five firms per discipline for a three-year contract term beginning July 1, 2027, and ending June 30, 2030, with an option for a one-year extension. Eligible firms must maintain a principal office in the San Francisco Bay Area. Work will be assigned through individual Task Orders, with compensation based on either fixed fees or hourly rates. The selection process utilizes a 100-point ranking system to shortlist firms for interviews. Applicants must submit their qualifications via Bid Express by December 8, 2026, at 2:00 PM. Submissions must include a cover letter explicitly accepting the City's Service Level Agreement as-is, professional resumes, work references, and a history of litigation or contract terminations from the last five years. Contractors are required to maintain comprehensive insurance, including commercial general liability of at least one million dollars per occurrence and workers compensation as required by California law. Payments are processed monthly within 30 days of receipt, though all authorized work is contingent upon appropriated funding. Additionally, contractors must adhere to state prevailing wage laws for any contract exceeding one thousand dollars.

City of San Rafael

POSTED

about 6 hours ago

DEADLINE

Marine Stability & Ballast SpecialistThis subcontract for Marine Stability and Ballast Specialist services supports prime contractors on ferry projects for the Chatham Area Transit Authority in Georgia. The selected provider is responsible for conducting stability testing, which includes supplying the necessary personnel and weights, as well as the subsequent installation of lead ballast and flotation foam based on the resulting stability analysis. The contractor must ensure that all final installations meet the satisfaction of the USCG OCMI and deliver a comprehensive stability test report upon completion. Interested parties should note the response deadline of January 22, 2027, for this specialized technical engagement categorized under NAICS code 541330.

Chatham Area Transit Authority

POSTED

about 6 hours ago

DEADLINE

Hydrology and Hydraulic (H&H) AnalysisThis subcontract opportunity is for the provision of Hydrology and Hydraulic (H&H) Analysis services to support prime contractors on Montana Department of Transportation remediation projects. The selected provider will be responsible for performing water flow analysis, drainage analysis, and flood risk assessments utilizing HEC-RAS or HEC-HMS software. The final deliverables for these assignments include a comprehensive Hydrology and Hydraulic report along with all necessary supporting data. Qualified candidates must hold a Professional Engineer license to perform this work under NAICS code 541330. The solicitation was posted on November 10, 2026, with a response deadline of December 9, 2026. Interested parties can find further details through the State of Montana procurement portal.

POSTED

about 6 hours ago

DEADLINE

Civil and Structural Engineering ServicesThis subcontract for Civil and Structural Engineering Services involves providing specialized engineering design and analysis for prime contractors working on Montana Department of Transportation ditch remediation projects. The scope of work includes conducting structural analyses of existing ditch structures, developing comprehensive remediation plans, and preparing detailed engineering drawings that adhere to MDT standards. The selected provider must hold a Professional Engineer license in the state of Montana to deliver signed and sealed engineering plans, structural calculations, and technical specifications. This opportunity is categorized under NAICS code 541330, with a response deadline set for December 9, 2026.

POSTED

about 6 hours ago

DEADLINE

Structural Engineering (Culvert Design)This subcontract for Structural Engineering focuses on the detailed structural design of culvert replacements for prime contractors working on Montana Department of Transportation interstate projects. The scope of work includes the design of arch structures, box culverts, and reinforced concrete pipe, culminating in the delivery of technical specifications, detailed construction drawings, and final structural calculations. The opportunity is categorized under NAICS code 541330 and is associated with the state of Montana. Interested parties must adhere to the timeline established by the posting date of November 10, 2026, with a response deadline set for December 9, 2026.

POSTED

about 6 hours ago

DEADLINE

Geotechnical Investigation & Soil AnalysisThis subcontract for Geotechnical Investigation and Soil Analysis involves performing subsurface investigations for prime contractors working on Montana Department of Transportation interstate culvert projects. The scope of work includes conducting soil boring, sampling, and laboratory testing of soil properties to establish necessary recommendations for structural support and bedding materials. The selected provider will be responsible for delivering comprehensive soil boring logs and Geotechnical Investigation Reports. This opportunity is categorized under NAICS code 541330 and was posted on November 10, 2026, with a response deadline of December 9, 2026.

POSTED

about 6 hours ago

DEADLINE

Hydrologic and Hydraulic (H&H) AnalysisThis subcontract for Hydrologic and Hydraulic (H&H) Analysis involves providing specialized water flow modeling and hydraulic calculations for prime contractors working on Montana Department of Transportation interstate culvert projects. The scope of work includes analyzing watershed data, calculating peak flow rates, and modeling water velocity to ensure culvert sizing adheres to both state and federal standards. The selected provider will be responsible for delivering comprehensive H&H Analysis Reports, detailed sizing calculations, and hydraulic modeling data. This opportunity falls under NAICS code 541330 and is associated with the state of Montana, with a response deadline set for December 9, 2026.

POSTED

about 6 hours ago

DEADLINE

Geotechnical InvestigationThis subcontract for Geotechnical Investigation involves performing soil borings and subsurface analysis to support prime contractors on Montana Department of Transportation infrastructure projects. The scope of work includes field drilling, soil sampling, and laboratory testing, culminating in the delivery of a Geotechnical Investigation Report and specific foundation bearing capacity recommendations. Qualified providers must hold a Professional Engineer license with a specialty in Geotechnical engineering. The solicitation was posted on November 10, 2026, with a response deadline of December 9, 2026. This opportunity falls under NAICS code 541330 and is managed through the State of Montana.

POSTED

about 6 hours ago

DEADLINE

Hydrologic and Hydraulic EngineeringThis subcontract for Hydrologic and Hydraulic Engineering involves providing specialized water flow analysis and hydraulic modeling for prime contractors working on Montana Department of Transportation river crossing projects. The scope of work includes conducting scour analysis, floodplain mapping, and drainage design utilizing HEC-RAS and HEC-HMS software to ensure compliance with FEMA and MDT hydraulic requirements. The selected provider must employ a licensed Professional Engineer to deliver comprehensive hydraulic analysis reports and detailed drainage maps. Interested parties should note the response deadline of December 9, 2026, for this opportunity categorized under NAICS code 541330.

POSTED

about 6 hours ago

DEADLINE

Transportation Engineering DesignThis subcontract for Transportation Engineering Design involves providing primary engineering design services for transportation infrastructure on Montana Department of Transportation projects. The selected contractor will be responsible for roadway alignment, geometric and pavement design, and the creation of construction plans and specifications that adhere to MDT standards. Technical execution requires proficiency in Civil 3D or MicroStation to deliver finalized, signed, and sealed engineering plans. A mandatory requirement for this engagement is a Professional Engineer license valid in the state of Montana. Interested parties must submit their responses by December 9, 2026. The project falls under NAICS code 541330 and is managed through the State of Montana procurement system.

POSTED

about 6 hours ago

DEADLINE

More opportunities from Government of Canada → Department of the Environment (ECCC )

Same awarding agency

Physical Oceanographic Data Collection ServicesThis subcontract involves the collection and organization of physical oceanographic data for prime contractors supporting the Government of Canada's Department of the Environment in British Columbia and Nova Scotia. The scope of work includes gathering critical measurements for currents, tides, bathymetry, salinity, and temperature through the use of specialized equipment such as oceanographic sensors, current meters, and Multibeam Echosounders. The final deliverable is a comprehensive 2025 dataset organized by specific study sites. Qualified providers must possess the necessary marine vessel certifications and operator licenses to perform the field work. The project falls under NAICS code 541370 and is focused on high-precision data acquisition within Canadian coastal waters. Interested parties should note the response deadline of December 10, 2026.

Surveying and Mapping (except Geophysical) Services

POSTED

about 23 hours ago

DEADLINE

Mesh and Hydrodynamic Framework for Shellfish Water Classification Program

Solicitation # 5000096055

Environment and Climate Change Canada is soliciting a contractor to develop a mesh and hydrodynamic framework for the Shellfish Water Classification Program in British Columbia. The primary objective is to collect and organize physical oceanographic data to create hydrodynamic models that predict fecal coliform contamination from sanitary pollution sources, such as wastewater treatment plants, in coastal and intertidal shellfish harvesting areas. The deliverables must be compatible with Danish Hydraulic Institute software, specifically MIKE 3 and MIKE 21, and include a full year of 2025 data. The mesh must be optimized to allow two-week scenarios to run within a 24-hour window on agency computers. The contract is awarded based on a weighted evaluation consisting of 70% technical merit and 30% price, with a minimum technical score of 60 points required for compliance. Performance is divided into two years, with Year 1 extending from the award date to March 31, 2027. The contractor is responsible for industry-standard quality assurance, and all deliverables are subject to approval by the technical lead. Payments are processed within 30 days of receiving a certified invoice. The solicitation closes on December 10, 2026, and requires submissions via CanadaBuys.

Engineering Services

POSTED

about 23 hours ago

DEADLINE

Veterinary Pathology ConsultantThis subcontract opportunity is for a Veterinary Pathology Consultant to provide specialized diagnostic pathology services for prime contractors working on Environment and Climate Change Canada wet lab projects. The selected consultant will be responsible for performing pathology examinations on animal tissue samples and analyzing disease states utilizing diagnostic imaging tools and microscopy, with the final deliverable being professional diagnostic pathology reports for each occurrence. Qualified candidates must hold a Veterinary degree and possess board certification in Pathology, along with active licensure with the College of Veterinarians of Alberta. This project is managed under the Government of Canada's Department of the Environment and will be performed within Canada. The response deadline for this opportunity is December 15, 2026.

Offices of All Other Miscellaneous Health Practitioners

POSTED

DEADLINE

in about 1 month

Attending Veterinarian for Wet Lab FacilitiesThis subcontract for the Department of the Environment (ECCC) requires an Attending Veterinarian to provide veterinary oversight and regulatory compliance inspections for wet lab projects. The selected professional will be responsible for conducting biannual site visits, performing annual Post-Approval Monitoring of animal use protocols, and providing on-call emergency care specifically for aquatic species. Additional duties include attending Animal Care Committee meetings and supporting triennial CCAC Assessments to ensure all operations meet established standards. To qualify for this role, the contractor must hold a Veterinary Degree and maintain active licensure with the College of Veterinarians of Alberta. Key deliverables include the submission of detailed inspection and PAM reports. The opportunity was posted on November 6, 2026, with a response deadline of December 15, 2026, for performance within Canada.

All Other Professional, Scientific, and Technical Services

POSTED

DEADLINE

in about 1 month

Fabrication and Installation Contract Admin SupportThis subcontract provides professional oversight and quality auditing for prime contractors working on projects for Environment and Climate Change Canada and the Canadian Wildlife Service. The scope of work involves reviewing material samples, shop drawings, and fabrication tender packages to ensure full alignment with the original design intent. The service provider is responsible for conducting site visits to BCNWA, MLNWA, and SCNWA to audit installed signage and document any deficiencies. Key deliverables include the submission of deficiency memos and the provision of approved shop drawing reviews. The work is performed in Ontario, Canada, under the Department of the Environment.

Engineering Services

POSTED

DEADLINE

Wayfinding Basemap and Graphic ProductionThis subcontract for Wayfinding Basemap and Graphic Production supports prime contractors on projects for Environment and Climate Change Canada and the Canadian Wildlife Service. The scope of work involves utilizing GIS and Open Data to assemble wayfinding basemaps that detail roads, trails, and accessibility barriers. Additionally, the contractor is responsible for designing graphics for welcome and pedestrian signage, adhering to specific color and font guidelines to deliver final 1:1 scale print-ready PDF artwork and basemaps. The project is categorized under NAICS code 541810 and is performed within Ontario, Canada, excluding the National Capital Region. Interested parties should note the response deadline of November 25, 2026, for this Government of Canada initiative managed through the Department of the Environment.

Advertising Agencies

POSTED

DEADLINE

Wayfinding Signage Fabrication and InstallationThis subcontract involves the fabrication and installation of a comprehensive wayfinding signage system for the Department of the Environment and Climate Change Canada and the Canadian Wildlife Service. The scope of work includes producing primary and secondary welcome signs, as well as pedestrian and vehicular signage, across BCNWA, MLNWA, and SCNWA sites. All production must adhere to provided shop drawings and Design Intent, with final installation carried out according to specific Sign Location Map booklets. The project is located in Ontario, Canada, outside of the National Capital Region. Interested parties must submit their responses by November 25, 2026, to support prime contractors in delivering the fully installed signage infrastructure.

Sign Manufacturing

POSTED

DEADLINE

Veterinary Care

Solicitation # 5000096424

Environment and Climate Change Canada is soliciting a supplier to provide comprehensive veterinary care for all vertebrate animals at the Northern Forestry Centre wet lab facilities in Edmonton. The selected provider will also serve as a required veterinarian member of the Prairie and Northern / Pacific and Yukon Laboratories for Environmental Testing Animal Care Committee. The contract term is five years, beginning April 1, 2027. Key deliverables include biannual wet lab facility inspections and ACC meeting attendance, annual post-approval monitoring visits, up to 10 hours of annual emergency services, and pathology services upon request, with monthly reporting required for all services. The contract will be awarded based on a combined rating of 70 percent technical merit and 30 percent price. To be compliant, the proposed resource must hold a valid veterinary degree and be a licensed member of the College of Veterinarians of Alberta in good standing. Technical evaluation focuses on education specific to aquatic species, with a minimum cumulative score of 18 points required for responsiveness. The successful contractor must adhere to industry-recognized quality assurance procedures, sign a confidentiality agreement approved by the ACC, and meet specific insurance and integrity requirements.

Veterinary Services

POSTED

DEADLINE

in about 1 month

Develop Wayfinding Strategy for Mississippi Lake National Wildlife Area (MLNWA), St Clair National Wildlife Area (SCNWA) and Big Creek National Wildlife Area (BCNWA)

Solicitation # 5000095728

Environment and Climate Change Canada is seeking a contractor to develop wayfinding strategies and complete signage designs for the Mississippi Lake, St Clair, and Big Creek National Wildlife Areas in Ontario. The objective is to improve accessibility and enhance visitor experiences by applying guidance and design standards previously established for the Prince Edward Point National Wildlife Area. Key deliverables include the creation of sign location map booklets, the development of deficiency memos based on site visits, and the provision of fabrication and installation contract administration support, such as reviewing shop drawings and material samples. The contract will be awarded to the compliant offer with the lowest evaluated price, provided they meet all mandatory technical criteria. The initial performance period runs from the date of award to March 31, 2027, with two subsequent option periods extending through the 2028-29 fiscal year. All work must adhere to the Design Brief and Wayfinding Design Intent specifications, and the contractor is responsible for ensuring industry-standard quality assurance and performing final inspections before submitting work to Canada for acceptance. Proposals must be submitted electronically by November 25, 2026.

Graphic Design Services

POSTED

DEADLINE

Office Furniture Delivery and InstallationThis subcontract for the Government of Canada's Department of the Environment involves the delivery and installation of office furniture in Gatineau, Quebec. The selected provider will work for prime contractors to transport goods on a DDP basis, unloading and moving items to specific facility locations within the National Capital Region. The scope of work specifically requires the professional assembly and installation of 79 work surfaces and 98 storage units. All activities must be performed using professional tools and in strict adherence to Quebec health and site safety standards to ensure the final delivery of fully installed furniture.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Supply of Filing and Storage ProductsThis subcontract involves the manufacture and supply of 98 Scoles filing and storage units for prime contractors working on projects for the Government of Canada's Department of the Environment. All products must be produced according to Cat 3 Product Builder specifications and are available in a variety of finishes. The contractor is responsible for delivering the units to the designated site or logistics point within the National Capital Region of Canada. A critical requirement of the agreement is the certification that no forced labour was utilized during the production process. The contract is categorized under NAICS code 493190 and is managed through the CanadaBuys procurement system.

Other Warehousing and Storage

POSTED

DEADLINE

Supply of Electric Height-Adjustable Work SurfacesThis subcontract involves the manufacture and supply of 79 electric height-adjustable work surfaces for prime contractors working on projects for the Government of Canada's Department of the Environment. The surfaces must be produced according to Cat 2 Product Builder specifications and are available in a variety of finishes. The contractor is responsible for delivering the completed units to the designated site or logistics point within the National Capital Region. A critical requirement of the agreement is the certification that no forced labour was utilized during the production process. The contract falls under NAICS code 423610 and is managed through the CanadaBuys procurement system.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

RFP – Potable Water System Upgrade Design St. Anthony Airport

Solicitation # WS5967256651

Department of Public Works and Government Services

POSTED

about 23 hours ago

DEADLINE

Commissioning Services for the Embassy of Canada to the Philippines, in Manila

Solicitation # 27-324471

Department of Foreign Affairs, Trade and Development

POSTED

about 23 hours ago

DEADLINE

RFSO - Civil/Marine Engineering Consulting Services - Ontario, Prairie & Northwest Territories Regions

Solicitation # 30007424

Department of Fisheries and Oceans

POSTED

about 23 hours ago

DEADLINE

BCH2026-10 - Request for Proposals - 1495 Heron Road - Mechanical and Electrical Engineer Services

Solicitation # BCH2026-10

Canada Lands Company Limited

POSTED

DEADLINE

BCH2026-11 - Request for Proposals - 1495 Heron Road - Structural Engineering

Solicitation # BCH2026-11

Canada Lands Company Limited

POSTED

DEADLINE

Windows upgrade services – Phase 1 (Corridor Link & Roofing)

Solicitation # 26-58209

National Research Council of Canada

POSTED

DEADLINE

Fire Protection Commissioning Specialist

Department of Foreign Affairs, Trade and Development

POSTED

DEADLINE

Controls & ICT Commissioning Specialist

Department of Foreign Affairs, Trade and Development

POSTED

DEADLINE

Electrical & Life Safety Commissioning Specialist

Department of Foreign Affairs, Trade and Development

POSTED

DEADLINE

Mechanical Systems Commissioning Specialist

Department of Foreign Affairs, Trade and Development

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS