This Award Notice opportunity from Department Of Commerce was posted on January 15, 2014. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
The National Oceanic and Atmospheric Administration is soliciting proposals for the dry docking and repair of the NOAA Ship PISCES, a 208.6 foot vessel based in Pascagoula, Mississippi. The scope of work includes base items such as temporary services, sea valve overhauls, zinc renewals, cathodic protection, underwater body coating, and inspections of the bow thruster, ground tackle, and propulsion systems. Optional services include a complete underwater hull paint system, seawater branch line connections, and modifications to the thrust bearing foundation and transom fender.
This unrestricted procurement is issued as a Request for Proposals under FAR Part 15, with a firm fixed price contract awarded based on best value. The performance period is 40 calendar days, scheduled from approximately January 8, 2014, to February 16, 2014, excluding transit time. Requirements for the contractor include providing all necessary labor, materials, and equipment, as well as furnishing bid, performance, and payment bonds. The contract is subject to a liquidated damages clause and falls under NAICS code 336611.
PDF, High priority: read this first22 pages · specifications
HighAI Summary for AMC-000-1F General Requirements for Ship Repair Work on NOAA Ships: Standard Specification AMC-000-1F (August 1995), superseding AMC-000-1E, outlines the general requirements for contract ship repair work performed by contractors on NOAA ships assigned to the Atlantic Marine Center. It defines key technical terms (Inspect, Install, Rebuild, Renew), establishes requirements for condition reports, mandates weekly progress meetings, and details responsibilities regarding drawings, specifications, and the use of protective coverings in work areas.
PDF
PDF, High priority: read this first8 pages · specifications
HighAI Summary for AMC-240-1 Propulsion Shafts and Propellers: Standard Specification AMC-240-1 (September 1990) from the NOAA Atlantic Marine Center. It outlines general requirements and technical procedures for the inspection, removal, installation, and repair of propulsion shafts and propellers on NOAA ships, including specific guidelines for propeller fitment and FRP shaft covering.
PDF
PDF, High priority: read this first4 pages · specifications
HighAI Summary for AMC-505-1B Valve Overhaul and Test: Standard Specification AMC-505-1B (August 1995) for the National Oceanic and Atmospheric Administration (NOAA) Atlantic Marine Center. This document outlines the general requirements for the overhaul and hydrostatic testing of valves on NOAA ships and boats, including detailed disassembly, cleaning, machining, and seat leakage acceptance criteria.
PDF
PDF, High priority: read this firstspecifications
HighAI Summary for AMC-581-1A Inspection and Preservation of Ground Tackle: Standard Specification AMC-581-1A (September 1992) from the NOAA Atlantic Marine Center. It details the requirements for the removal, sandblasting, inspection, preservation, and marking of anchors and anchor chains. The document includes specific technical criteria for wire diameter and six-link dimensional inspections, a reference table for chain sizes and proof loads, and detailed painting/marking instructions for chain shots.
PDF
PDF, High priority: read this firstspecifications
HighAI Summary for AMC-997-1A Drydocking and Routine Drydock Work: Standard Specification AMC-997-1A (June 1989), issued by the NOAA Atlantic Marine Center, outlines general requirements for drydocking and routine drydock work on NOAA ships. It details critical technical requirements including facility certifications, dockmaster qualifications, block arrangements, cleaning procedures, grounding requirements, and mandatory joint docking inspections.
PDF
PDF, High priority: read this firstamendment
HighAI Summary for Amendment 0001 - NOAA Ship PISCES Solicitation: Amendment 0001 modifies the solicitation by scheduling an additional shipcheck for the NOAA Ship PISCES on December 2, 2013, deleting CLIN 0021 (Bow Thruster Drive Relocation), and extending the proposal submission deadline to December 6, 2013.
PDF
PDF, High priority: read this firstspecifications
HighAI Summary for Ameron Performance Coatings and Finishes Group - Steel and Shell Coating Specifications: Technical coating specifications for steel and shell surfaces, including surface preparation requirements (spray blast to SP1), specific product applications (Amercoat 388, Ameron 22F), color codes, and application rates. The document includes detailed tables for volume ratios and film thickness for various vessel areas.
PDF
PDF, High priority: read this firstsubcontracting-plan
HighAI Summary for Attachment J.6 - Subcontracting Plan Outline (EA133M-13-RP-0183): This document is a Subcontracting Plan Outline for solicitation EA133M-13-RP-0183, issued by the U.S. Department of Commerce. It provides guidance and a template for large business concerns to establish subcontracting goals for various small business categories (including SDB, WOSB, HUBZone, and VOSB) in compliance with FAR Subpart 19.7. The document includes FY 2013 target goals, a structure for identifying acquisition costs, and a table for mapping CLINs to business sizes.
PDF
PDF, High priority: read this first2 pages · specifications
HighAI Summary for Aux Seawater Cooling System Diagram Component List: Technical component list for an Auxiliary Seawater Cooling System. The document specifies detailed requirements for hose assemblies (referencing SAE J-1942 and NAVSEA S6430-AE-TED-010), various valve types (gate, globe, ball, butterfly, and check), pressure indicators, pressure switches, and seawater pumps including specific flow rates and total dynamic head (TDH) requirements.
PDF
PDF, High priority: read this first106 pages · specifications
HighAI Summary for Bearings, Lineshaft and Thrust - Description, Operation, Installation and Maintenance Instructions: Technical manual (FRV40-22 6 -005-010) dated 18 SEP 2007 for SKF and Michell Bearings, Lineshaft and Thrust, published by direction of NOAA for Halter Marine, Inc. under contract 50-SPNA-1-00031. The document provides detailed instructions for operation, installation, and maintenance, specifically covering SNL 30 and SNL 31 plummer block housings.
PDF
PDF, High priority: read this first2 pages · specifications
HighAI Summary for Bilge and Ballast System Diagram Component List: Technical component list for a Bilge and Ballast System (dwg529-FP01). The document details specific hardware including valve types (gate, butterfly, globe, ball), sizes, and service requirements, as well as pump specifications, strainers, and pressure indicators. Includes references to ABS approval and USCG categories.
PDF
PDF, High priority: read this firstspecifications
HighAI Summary for Bow Thruster Model 40 T3S Operating and Instruction Manual: Technical operating and instruction manual for the Tees White Gill Bow Thruster Type 40T3S-QR (Serial No. G679T) installed on vessel FRV40-226 under contract 50-SPNA-1-00031. The document provides detailed mechanical construction, installation, operation, and maintenance instructions, including steering gear and coupling specifications.
PDF
PDF, High priority: read this first7 pages · specifications
HighAI Summary for dwg581-+03_RV BIGELOW Anchor Handling Mods: Technical drawing/specification document regarding anchor handling modifications for the RV Bigelow. The document appears to be a set of engineering sheets for top side work for PC and HB.
PDF
PDF, High priority: read this firstamendment
HighAI Summary for EA133M-13-RP-0183 Amendment 0002: Amendment 0002 to solicitation EA133M-13-RP-0183 for the NOAA Ship PISCES. This document provides responses to vendor questions regarding ABS survey responsibilities, QP-1 certification for preservation work, and vessel hydrostatics. It adds reference documents, including the PISCES Hydrostatics table and Drawing M282-100-FH03 (Permanent Ballast Installation), and extends the proposal submission deadline to December 11, 2013, at 3:00 pm local time in Norfolk, VA.
PDF
PDF, High priority: read this first1 page · specifications
HighAI Summary for Egg Sampling System Diagram Component List: A technical component list for an Egg Sampling System, detailing specific valves (gate, ball, air vent, swing check), pressure indicators, hose assemblies, and a vortex pump. The document includes item numbers (e.g., 524A-VL-45) and technical specifications for components used in the Continuous Underway Fish Egg Sampler (CUFES).
PDF
PDF, High priority: read this first56 pages · specifications
HighAI Summary for Electrical Installation Details - Metric Conversion Chart: A technical reference document providing a metric conversion chart for conductor sizes, mapping AWG/MCM to mm² and circular mils.
PDF
PDF, High priority: read this firstspecifications
HighAI Summary for FA02 General Arrangements - Oceanographic Vessel: Technical drawing specifications and general arrangements for a vessel, including general notes on materials, dimensions (MIL-STD 1210), and layout references for machinery rooms, laboratories, and deck arrangements. Includes as-built revision history and technical notes dated through 2001.
PDF
PDF, High priority: read this firstspecifications
HighAI Summary for FA04 Docking Drawing Rev 02 (PISCES): Technical docking drawing and specifications for the PISCES vessel, Revision 02. The document provides detailed general notes on blocking arrangements, allowable block pressure (500 PSI), vessel displacement properties, and specific docking positions (1, 2, and 3) to facilitate hull cleaning and painting. It includes a parts list for zinc anodes, anode locating tables, and schematic plans for block positioning and transducer locations.
PDF
PDF, High priority: read this firstspecifications
HighAI Summary for FH20 Anchor Storage & Handling Layout & Details - Sheet 1: Technical drawing specifications and material list for the FH20 Anchor Storage & Handling layout. Includes general notes on vessel classification, material grades (Sterling Steel Grade A), welding standards, anchor chain marking requirements, and a material list for anchor bolsters. Dated between 2004 and 2009.
PDF
PDF, High priority: read this first64 pages · specifications
HighAI Summary for FRV40-22 6 Stern Tube Bearing and Shaft Seal Manual: Technical manual (FRV40-22 6-006-010) dated September 18, 2007, providing description, operation, installation, and maintenance instructions for the Stern Tube Bearing (Thordon Compac) and Shaft Seal (Kobelco) for the NOAA vessel FRV40-22 6. Produced by Halter Marine, Inc. under contract 50-SPNA-1-00031.
PDF
PDF, High priority: read this first3 pages · specifications
HighAI Summary for Grey and Black Water System Diagram - Drain Location List: Technical specifications and drain location list for a Grey and Black Water system. The document includes gravity drain pipe size design data, a detailed inventory of drain locations across multiple levels (01 LVL, 02 LVL, 03 LVL, MN DK, 2ND DK, TK TOP), and specific equipment item numbers (e.g., 528-ED-01) with associated sizes and service descriptions.
PDF
PDF, High priority: read this firstspecifications
HighAI Summary for Henry B. Bigelow Trim & Stability Booklet - Tank Capacity Summary: Technical specification sheet (Sheet 12) from the Trim & Stability Booklet for vessel HENRY B. BIGELOW (Hull No: 1953). The document provides a Tank Capacity Summary including volume, capacity in liters, tonnage, and center of gravity coordinates (VCG, LCG, TCG) for various ballast and fuel oil (FO) tanks.
PDF
PDF, High priority: read this firstspecifications
HighAI Summary for High Performance Flap Rudder Technical Manual (FRV40-22 6-071-010): Technical manual for the High Performance Flap Rudder (FRV40-22 6-071-010) provided under NOAA contract 50-SPNA-1-00031. The document includes approval and validation records from Halter Marine Inc., operational instructions, maintenance guidance, and technical specifications regarding the efficiency and use of the BECKER-rudder system.
PDF
PDF, High priority: read this firstspecifications
HighAI Summary for Hull Forebody Scantlings FR 0 - FR 18: Technical drawing and specifications document for vessel hull forebody scantlings (Frames 0 to 18). It includes general notes on classification (Weather OCS A1, CRILE E), material standards (Grade A steel), welding requirements, and detailed scantling tables for fume-tight bulkhead details, including plate thicknesses and stiffener spacing. The document contains multiple revisions and technical sections (e.g., Section 23-A, 19-A) with scales of 1:50 and 1:80.
PDF
PDF, High priority: read this first3 pages · specifications
HighAI Summary for Main SW Cooling System Diagram - Component List: Technical component list for the Main Seawater (SW) Cooling System. The document provides detailed specifications for valves, pumps, heat exchangers, strainers, flexible joints, hoses, and gauges, including sizes, service types, and part numbers (e.g., Aurora Series 361 pumps and various Monel trim butterfly valves).
PDF
PDF, High priority: read this first52 pages · specifications
HighAI Summary for Marine Shaft Braking System - Twiflex T40-EN Manual: Technical manual (M1344) dated September 19, 2007, for the Marine Shaft Braking System (Model: Twiflex T40-EN Caliper with 20:1 Air/Hydraulic Intensifier). Published by direction of NOAA and provided under contract 50-SPNA-1-00031 by Halter Marine, Inc. The document contains detailed technical specifications, installation, operation, and maintenance instructions, including braking force data, caliper dimensions, and hydraulic requirements.
PDF
PDF, High priority: read this first4 pages · specifications
HighAI Summary for MOC-100-1A ABS Load Line Survey Specification: August 2003 standard specification (MOC-100-1A) from the NOAA Marine Operation Center detailing requirements for conducting an American Bureau of Shipping (ABS) Load Line Renewal Survey on NOAA ships. It includes requirements for surveyor services, ultrasonic thickness gaging, tank inspections, and the submission of final ABS certification documents.
PDF
PDF, High priority: read this first12 pages · specifications
HighAI Summary for MOC-631-2D Coating Systems for Steel Surfaces: Standard Specification MOC-631-2D (August 2002) issued by the NOAA Marine Operation Center, Atlantic. This document establishes general requirements for surface preparation and the application of coating systems for steel surfaces on NOAA ships and boats, including references to SSPC standards, environmental constraints for application, and specific surface preparation methods such as near-white blast cleaning and ultrahigh-pressure water jetting.
PDF
PDF, High priority: read this first6 pages · specifications
HighAI Summary for MOC-631-3B Underwater Body Ablative Coating System: NOAA Marine Operations Center Standard Specification MOC-631-3B (September 2000), superseding AMC-631-3A. It defines the general requirements for the application of copper-based, tributyltin-free ablative coating systems on the underwater bodies of NOAA steel ships and boats. The document details surface preparation methods (sandblasting and ultra-high pressure water blasting), environmental conditions for application, and specific requirements for complete versus maintenance coating systems.
PDF
PDF, High priority: read this first69 pages · specifications
HighAI Summary for NOAA Ship PISCES (R 226) FY2014 Drydocking and Repairs Detail Specification: Detailed technical specifications dated September 2013 for the FY2014 drydocking and repairs of the NOAA Ship PISCES (R 226). The document outlines the scope of work, general requirements, basic items (including sea valve overhauls, coating, and propulsion shaft inspection), additional work items, and option items. It includes specific requirements for Quality Assurance, ABS survey schedules, and vessel descriptive data.
PDF
PDF, High priority: read this firstspecifications
HighAI Summary for Outboard Profile - dwg085: Technical drawing and specification document for a vessel's outboard profile. It includes general notes on construction materials (steel hull, aluminum deckhouse), detailed vessel characteristics (length, beam, draft), and a revision table regarding material landing and lifting zones.
PDF
PDF, High priority: read this firstrfp
HighAI Summary for RFP Attachment J.5 - Offer Form: This document is a solicitation offer form (Attachment J.5) used for the submission of bids. It contains fields for the solicitation number, date and time for receipt of offers, and the designated office for submission.
PDF
PDF, High priority: read this firstspecifications
HighAI Summary for Rockwell Automation Bow Thruster Schematic Drawings: Technical schematic drawings and electrical specifications for a Bow Thruster Blower Starter and Power Supply Package by Rockwell Automation. The document includes wiring diagrams, RS232 programming cable details, RTD inputs, and transformer specifications (600VAC), with revision dates ranging from 2005 to 2012.
PDF
PDF, High priority: read this firstspecifications
HighAI Summary for Rudder Stock Center Profile Looking Rudge 750 Series (Drawing 7-1A): Technical drawing (Drawing No. 7-1A) for the Rudder Stock Center Profile of the Rudge 750 Series, dated 01/15/99 and approved by John Smith. The document contains general notes regarding dimensions in inches and a part list.
PDF
PDF, High priority: read this firstspecifications
HighAI Summary for R/V Oscar Dyson Anchor Handling Modifications - Drawing OD-581-002: Technical drawings and specifications for anchor handling modifications on the R/V Oscar Dyson, including the installation of new chain stoppers, hawse pipes, and Pelcon hooks, as well as shell rubbing plate replacements. The document includes key plans, detailed framing sections, and revision history dated through 2019.
PDF
PDF, High priority: read this first1 page · specifications
HighAI Summary for Seachest Diagram Rev 6 Component List: Technical component list for Seachest Valves (Revision 6), detailing item numbers, sizes, and descriptions for gate valves (163-VL-01 through 163-VL-05) with Monel trim.
PDF
PDF, High priority: read this first1 page · specifications
HighAI Summary for Seawater Washdown System Diagram: Technical diagram for a Seawater Washdown System provided by VT Halter Marine, Inc. and Vision Technologies Systems.
PDF
PDF, High priority: read this firstspecifications
HighAI Summary for Shafting Layout & Details - Flange/Sheathing/Stern Tube Bearing: Technical drawing and specifications document dated 2023-10-20 (with references to 2007) detailing the Flange/Shafting/Stern Tube Bearing for a septic tank with boiler. Includes detailed part lists, material specifications, dimensions, and assembly requirements for flanges, nuts, and plates, referencing API standards and government installation requirements.
PDF
PDF, High priority: read this firstspecifications
HighAI Summary for SKF Drawing 25616 - Ovako Couplings AB: Technical drawing and specifications for Ovako Couplings from SKF Coupling Systems AB (2001). The document provides dimensional data in inches, notes on phosphated inner sleeves, and specific machining instructions for reaming discs in the mounted condition.
PDF
PDF, High priority: read this first16 pages · specifications
HighAI Summary for SKF OKC Coupling Mounting and Dismounting Instructions (No. 81489): Technical instruction manual (Edition D, dated 2005-10-31) for the mounting and dismounting of SKF OKC couplings for shafts ranging from 100-1000mm. The document provides critical technical data, including oil viscosity recommendations based on temperature, equipment tool kit specifications (TMHK series), and detailed step-by-step procedures for installation and removal.
PDF
PDF, High priority: read this first44 pages · rfp
HighAI Summary for Solicitation RP0183 - NOAA Eastern Region Acquisition Division: A negotiated solicitation (RFP) issued on November 4, 2013, by the Department of Commerce/NOAA Eastern Region Acquisition Division for ship maintenance and repair services. The document includes a detailed Schedule of Prices (Section B) featuring base items for drydocking, coating, and inspections, as well as option CLINs and Additional Item Requirements (AIRs) for growth work. Offers were due by December 3, 2013.
PDF
PDF, High priority: read this first2 pages · bid-bond
HighAI Summary for Standard Form 24 - Bid Bond: This document is a Standard Form 24 (SF 24), a Bid Bond used in U.S. Federal procurements. It serves as a legal guarantee that the principal will execute the contract and provide required bonds if their bid is accepted. The document includes fields for the principal, sureties, penal sum, and bid identification, along with detailed instructions for completion per FAR 53.228(a).
PDF
PDF, High priority: read this first6 pages · specifications
HighAI Summary for Standard Specification AMC-000-2C: Temporary Services at Contractor Facilities: August 1995 standard specification from NOAA Atlantic Marine Center (superseding AMC-000-2B) detailing general requirements for temporary services provided to NOAA ships at contractor facilities. It covers requirements for gangways, electric power, potable water, telephone/fax services, sewage disposal, and fire alarm systems.
PDF
PDF, High priority: read this firstspecifications
HighAI Summary for Thrust Bearing Foundation Mods - Oil Cooler Removal: Technical drawing and material list dated 3/15/2025 detailing structural modifications to a thrust bearing foundation to create permanent removal access for a cooling unit. Includes material specifications (ASTM A36), installation requirements for temporary supports, welding standards (ABS rules), and specific cutting tool requirements.
PDF
PDF, High priority: read this firstspecifications
HighAI Summary for Vents and Sounds System Diagram: Technical drawing and specifications document for Vents and Sounds System Diagrams, including general construction notes referencing LNSF 9002/9003, conversion tables, and specific details for Incinerator Sludge Tank, MSD Vent, and Roll Stabilization Tank.
PDF
PDF, Low priorityspecifications
LowAI Summary for Cathodic Protection System Model ICCP 50A Manual: Technical manual for the Marimpress ICCP 50A Cathodic Protection System provided under contract 50-SPNA-1-00031 for NOAA by Halter Marine, Inc. The document contains detailed description, operation, installation, and maintenance instructions, including components such as the electric cabinet, titanium anodes, reference cells, and dielectric shields.
PDF
PDF, Low priority34 pages · specifications
LowAI Summary for Mitchell Bearings Technical Manual - Metric Conversions: A technical reference document providing metric system equivalents, approximate conversion factors for linear, liquid, square, and cubic measures, and temperature conversion formulas.
PDF
PDF, Low priorityspecifications
LowAI Summary for PowerFlex 700S High Performance AC Drive Installation Manual (Frames 9-14): Technical installation manual for Rockwell Automation PowerFlex 700H and 700S High Performance AC Drives, specifically covering Frames 9 through 14. The document includes safety guidelines, manual updates, and detailed installation instructions for various frame sizes, including wiring and dimension drawings.
PDF
PDF, Low priority2 pages · other
LowAI Summary for RFP Attachment J.3 - Standard Form 1416 Payment Bond: Standard Form 1416 (REV. 10-98), a Payment Bond for other than construction contracts, prescribed by GSA-FAR (48 CFR) 53.228(m). This document provides the legal framework and signature requirements for a Principal and Surety to guarantee payment to claimants in the prosecution of a government contract.
PDF
PDF, Low priority2 pages · specifications
LowAI Summary for SKF C 3184 KM Toroidal Roller Bearing Dismounting Instructions: Technical instruction document dated 6/23/2009 providing procedures for the dismounting of SKF C 3184 KM Toroidal roller bearings from adapter sleeves. It details two primary methods: hydraulic/oil injection and the use of a hydraulic nut (SKF HMV 84 E), including specific oil viscosity requirements and safety precautions.
AI Contract Breakdown
Uniform Contract Format
Contract not broken down yet
CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.
Timeline
6 updates
PhaseAwarded
Posted
Presolicitation
Notice updated
Response deadline changed from Oct 16, 2013 to Oct 29, 2013. The notice description changed.
Notice updated
The response deadline was removed. The notice description changed.
Notice updated
The notice description changed.
Notice updated
Response deadline added: Dec 3, 2013. The notice description changed.
Notice updated
The notice description changed.
Notice updated
The notice description changed.
Type Changed
Presolicitation → Solicitation
Awarded
Contract was awarded
Submission Closed
Find active opportunities like this
Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.
DUE TO THE CURRENT GOVERNMENT SHUTDOWN, THE RELEASE OF THE SOLICITATION AND SHIPCHECK ARE TEMPORARILY DELAYED AND WILL BE RESCHEDULED. The National Oceanic and Atmospheric Administration (NOAA), Eastern Region Acquisition Division, Norfolk, VA, on behalf of the Office of Marine and Aviation Operations (OMAO), is soliciting for the dry docking and repairs to NOAA Ship PISCES. The PISCES is 208.6 feet long overall, and its home port is Pascagoula, MS. Provide all labor, material, and equipment necessary to perform the following (including, but not limited to): BASE ITEMS: Temporary Services; Dry Docking and Routine Dry Dock Work; Sea Valve Overhauls; Zinc Renewals and Additional Zinc Anode Installations; Cathodic Protection Inspection and Replacement; Underwater Body Coating; Bow Thruster Inspection; Ground Tackle Inspection and Preservation; Rudder/Tailshaft Removal and Inspection; Propulsion Shaft Thrust Bearing Inspection. OPTION ITEMS: Underwater Hull Complete Paint System; Seawater Branch Line Connection; Thrust Bearing Foundation Modifications; and Transom Fender Modifications. The solicitation will include a liquidated damages clause, as well as a requirement for bid, performance, and payment bonds. The performance period will be 40 calendar days, with a start date on or about January 8, 2014 and a completion date on or about February 16, 2014. Ship's transit time to and from the place of performance is not included in the specified performance period. The place and date for an inspection of the ship is (to be rescheduled) at 0900 (local time) at NOAA Gulf Marine Support Facility, 151 Watts Avenue, Pascagoula, MS 39567. Vehicle and personnel access to NOAA Ship PISCES for pre-proposal inspections is restricted via gated security. Appointments and arrangements for attending the ship inspection can be made by calling the Port Engineer at least 48 hours in advance at +1 (555) 000-0000. This procurement is being issued on an unrestricted basis. The applicable NAICS code is 336611, which has a corresponding size standard of 1,000 employees. The acquisition will be issued as a Request for Proposals (RFP) in accordance with FAR Part 15; the RFP will be issued on or about (to be rescheduled) with proposals due on or about (to be rescheduled). The anticipated award date is December 02, 2013. The Government anticipates awarding a firm fixed price contract to the contractor whose proposal represents the best value, price and other factors considered. The RFP will be issued via electronic posting on the Federal Business Opportunity (FEDBIZOPPS) web page www.fedbizopps.gov. Hard copies of the RFP will not be issued. It is incumbent upon contractors to monitor FEDBIZOPPS for the release of the RFP, specifications, drawings and all subsequent amendments. The specification will be uploaded to www.fedbizopps.gov with the RFP. Prospective offerors who are interested in submitting a proposal for this acquisition are encouraged to register with the FedBizOpps Vendor Notification Service and to be on the Interested Vendors List for this acquisition (see applicable tab within FedBizOpps where this synopsis is posted). Offerors must be registered in the System for Award Management (SAM) database at www.sam.gov/portal/public/SAM; offerors must also obtain a Data Universal Numbering System (DUNS) number and provide it with the offer. All responsible sources may submit an offer, which shall be considered by the agency. For information concerning this acquisition, please forward inquiries via e-mail to Michelle Blake, at contact@example.gov or via telephone at +1 (555) 000-0000.
More opportunities from Department Of Commerce Noaa