DRYDOCK REPAIRS USCGC CAMPBELL (WMEC-909)

The U.S. Coast Guard is setting aside this acquisition for Small Business concerns. The NAICS Code is 336611 and the small business standard is less than 1,000 employees. This acquisition will be issued as a Request for Quotes (RFQ) on or about April 29, 2009 via the Federal Business Opportunities (FEDBIZOPPS) web page at www.eps.gov with quotes due on or about May 20, 2009. The government reserves the right to cancel this solicitation, either before or after the quote opening or closing date. Hard copies of the specification and solicitation will not be issued. A CD-ROM containing all applicable drawings is available free of charge to contractors upon request not later than three (3) days from the quote opening. The CD-ROM(s) contain WINDOWS compliant raster/vector formats (e.g.*.DWF, etc).The acquisition is for drydock repairs to the USCGC CAMPBELL (WMEC-909), a 270 foot B Class Medium Endurance Cutter, at the contractors facility. The vessel availability is starting on or about July 27, 2009 to Sept 18, 2009, for a total of fifty-three (53) days. The work will include, but is not limited to Perform ultrasonic thickness measurements-freeboard hull plating and underwater hull plating, clean, inspect, and repair ballast tanks, remove and reinstall propeller shafts, and inspect stern tubes, inspect propeller shafts, renew shaft covering, straighten shaft, renew water-lubricated shaft bearings, renew propeller shaft sleeve(s), remove and reinstall controllable pitch propeller hubs, service both onboard controllable pitch propeller systems, renew depth indicating transducers, renew speed doppler, overhaul and renew valves, inspect sea strainers, service rudder assemblies, inspect and repair port and starboard fin stabilizer systems, service fin stabilizer systems, renew fin stabilizer shaft sleeve, perform anchor, anchor chain, and ground tackle maintenance, Preserve Chain Lockers - 100 percent, Preserve Ballast Tanks - 100 percent, Preserve Ballast Tanks - Partial, Preserve Underwater Body - 100 percent, Preserve Underwater Body - Partial, Preserve Freeboard - 100 percent, Renew Cathodic Protection System, routine drydocking, provide temporary logistics, provide support for performance of sea trials, perform deck plating repairs in AMS 1, preserve auxiliary II bilge surfaces, preserve refrigerated and dry stores bilge surfaces, preserve JP-5 pump room bilge surfaces, renew TACAN HELIAX cable, repair engine room ventilation fan and motor assemblies, renew solenoid valves, clean ventilation heating coils, preserve hangar door, repair, preserve and disinfect potable water tanks, preserve aft steering bilge surfaces, preserve engine room bilge surfaces, renew AFFF ad sprinkler valves, renew deck drains, and provide small boat storage. All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualifications procedures. Questions may be addressed to Beverly Garner, Contract Specialist at +1 (555) 000-0000 or via email contact@example.gov .