Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Electrical Installation and Wiring

Active

International

Response Deadline09/03/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Electrical Installation and Wiring pertains to the installation of comprehensive electrical systems for a construction project under the Department of National Defence of the Government of Canada. It encompasses the supply and installation of conduits, wiring, electrical panels, and lighting fixtures, ensuring full compliance with industry standards and project specifications. The work is designated as a subcontract and is targeted for performance in Québec, with no specific set-aside provisions indicated. The North American Industry Classification System code 238210 applies, confirming the scope aligns with electrical contracting services. The solicitation was posted on June 22, 2026, and responses must be submitted no later than September 3, 2026, at 7:00 p.m. Eastern Time. The contract opportunity is accessible through the Canada Buys portal, though no point of contact or detailed office address is provided. All parties interested in bidding must ensure their proposals meet technical requirements, scheduling constraints, and regulatory compliance for federal infrastructure projects in Canada, with a clear focus on safety, durability, and code adherence for the electrical systems to be installed at the Québec site.

General Info

Electrical installation contract for DND in Québec, due September 3, 2026, complying with federal standards.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

238210 - Electrical Contractors and Other Wiring Installation ContractorsView NAICS

Place of Performance

Québec, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJun 22

subcontract

Response DeadlineSep 3

Submission deadline

Response Deadline

09/03/2026, 07:00:00 PM UTCin 27 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → Department of National Defence

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → Department of National Defence

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installation of electrical systems including conduits, wiring, panels, and lighting fixtures for the construction project.

Similar Contracts

Same NAICS industry code

RFO AWP-0772-00, HNL Fiber Optic Transmission System (FOTS) Design Support and Construction in Honolulu, HI

Solicitation # rfo-awp-0772-00-hnl-fiber-optic-transmission-system-fots-design-support-construction-honolulu-hi-0

The contract involves the installation of a new Fiber Optic Transmission System at Daniel K. Inouye International Airport in Honolulu, Hawaii, executed in two phases and including conduit trenching and boring between three buildings. The work falls under NAICS codes 238210, 237130, and 237990, with an estimated construction value between one and five million dollars. This solicitation is restricted to small businesses, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses as part of an SBA set-aside. Responses are due by August 15, 2026, and interested firms must contact Anna Ma, Subcontract Administrator at Parsons, via email at anna.t-ctr.ma@faa.gov or by phone at 3602044418. The solicitation is managed by PTSI Managed Services, Inc., with performance located exclusively in Hawaii.

PTSI Managed Services, Inc.

POSTED

about 3 hours ago

DEADLINE

RFO AWP-0772-00, HNL Fiber Optic Transmission System (FOTS) Design Support and Construction in Honolulu, HI

Solicitation # rfo-awp-0772-00-hnl-fiber-optic-transmission-system-fots-design-support-construction-honolulu-hi

The contract entails the installation of a new Fiber Optic Transmission System at Daniel K. Inouye International Airport in Honolulu, Hawaii, executed in two phases and involving conduit trenching and boring between three designated buildings. The work falls under NAICS codes 238210, 237130, and 237990 and carries a construction magnitude between one and five million dollars. The solicitation is set aside for small businesses, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses, ensuring opportunities for diverse federal contracting participants. All proposals must be submitted by August 15, 2026, with inquiries directed to Anna Ma, Parsons Subcontract Administrator, at anna.t-ctr.ma@faa.gov.

PTSI Managed Services, Inc.

POSTED

about 3 hours ago

DEADLINE

Replacement Fiber Line

Solicitation # Replacement Fiber Line

The contract involves the replacement of existing multimode fiber optic cabling with 12-strand single mode fiber optic cabling connecting Building 2436 to Building 2443 at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope requires full provision of labor, equipment, and tools to remove retired multimode aerial fiber lines and splice boxes from utility poles and building infrastructure, and to install new 12-strand single mode aerial fiber using center-owned utility poles between the network closet in Building 2436 and the Maintenance office in Building 2443. Specific hardware must meet or exceed Belden product specifications including FS3L0024NS OS2 OSP fiber, ECX-01U rack-mounted enclosure, FFSX12LD adapter panel, and FTSLC900FS01 fiber connectors, with SFPs to be provided by Job Corps. The work is structured as a fee-for-service contract with a lump sum pricing model, and the contractor must submit a detailed bid sheet along with supplemental documentation including a W-9, self-certification form, and acceptance of terms. All submissions must be emailed by 3:00 PM CST on August 10, 2026, to the designated point of contact. The contract enforces compliance with multiple Federal Acquisition Regulation clauses including Service Contract Labor Standards with Wage Determination WD#2015-4687 (Rev 31), Contract Work Hours and Safety Standards Act, and Reporting Executive Compensation. Subcontractors with agreements exceeding $30,000 must disclose debarment status under FAR 52.209-6. The contractor must be a qualified small business as defined under NAICS code 238210 with a size standard of $19.0 million, and eligible set-asides include small business, small disadvantaged business, women-owned, HUBZone, veteran-owned, and service-disabled veteran-owned small businesses. Mandatory insurance requirements include $1 million per occurrence and $3 million aggregate general liability coverage with MTC listed as additional insured, $1 million auto coverage, and $500,000 workers’ compensation. The contractor is required to indemnify MTC against all claims arising from performance or negligence, comply with the Drug-Free Workplace Act and Anti-Kickback Act, and adhere to strict data breach reporting protocols requiring notification to the Department of Labor within one hour of

Earle C. Clements Job Corps Center

POSTED

about 3 hours ago

DEADLINE

AEA-0536, VORTAC (ART) Doppler Conversion, Watertown, NY

Solicitation # aea-0536-vortac-art-doppler-conversion-watertown-ny

The FAA is upgrading an existing VHF Omnidirectional Range facility in Watertown, New York, to a modern Doppler VORTAC system with an offset TACAN, requiring complete demolition of the current infrastructure and new construction of a fully integrated navigation facility. The new Doppler VORTAC will include a 37’x37’ steel building with a 60-foot diameter counterpoise integrated into the roof, along with all necessary foundations, site development, and utility connections. Additionally, an offset TACAN component will be built as a standalone 16’x16’x20’H steel tower with its own foundation, site preparation, and utilities, positioned separately from the main VORTAC structure to ensure optimal signal performance and operational redundancy. This contract, solicited under AEA-0536, is designated for small business set-asides, including categories such as Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone, Veteran-Owned, and Service-Disabled Veteran-Owned Small Businesses, reflecting a commitment to diverse contractor participation. The solicitation was posted by PTSI Managed Services, Inc. operating under Parsons, with a response deadline on August 28, 2026, and the work will be performed in New York. Angela Stydinger of the FAA is the designated point of contact for inquiries, and the project falls under NAICS code 238210 for site preparation and specialized trade contractors.

PTSI Managed Services, Inc (Parsons)

POSTED

about 3 hours ago

DEADLINE

Construction of Fire Protection System at Building C2 at Naval Weapons Station Earle, NJ

Solicitation # N4008526R0214

The U.S. Navy’s NAVFAC Mid-Atlantic is preparing to solicit proposals for the construction of a fire protection system at Building C2 on Naval Weapons Station Earle in Colts Neck and Leonardo, New Jersey, under the pre-solicitation notice N4008526R0214. This effort involves installing a fully integrated fire protection system including sprinklers and a modern combination fire alarm and mass notification system, replacing existing infrastructure. The contract will be awarded as a Firm-Fixed Price under FAR Part 15 through a non-negotiated, lowest price technically acceptable process, with an estimated value between one and five million dollars. The project has a strict 270-calendar-day completion timeline after award and requires a 20 percent bid bond or $3 million, whichever is less, to comply with the Construction Wage Rate Requirements. This procurement is set aside entirely for small businesses under the NAICS code 238210, with a size standard of $19 million, as determined through Federal Acquisition Regulation compliance and verified by the Small Business Administration. Solicitation documents will be publicly available on SAM.gov starting on or about August 7, 2026, and only registered entities in SAM will receive updates or amendments. The evaluation will weigh both price and non-price factors such as prior experience and past performance, using a competitive, non-negotiated approach to ensure maximum small business participation. All prospective bidders must be actively registered in SAM, and no reimbursement will be provided for costs incurred in preparing responses to the pre-solicitation. Questions should be directed to the designated point of contact, Jessica Mercurio.

Navfacsyscom Mid-Atlantic

POSTED

about 7 hours ago

DEADLINE

Supply and Install a DMP XR550-E IDS System on SCIF

Solicitation # N6893626SIMACQD0AH2U00008

Naval Air Warfare Center

POSTED

about 7 hours ago

DEADLINE

Provide, Install, Integrate one Lithium-Ion Battery Cabinet with 17 x 2.04 kWh Battery Modules (Manufacturer Part # LIBSESMG17UL)

Solicitation # 70FB7026Q00000028

The contract solicits a single lithium-ion battery cabinet equipped with 17 battery modules, each rated at 2.04 kWh and identified by manufacturer part number LIBSESMG17UL, for installation at the Federal Emergency Management Agency’s Mobile Emergency Response Support facility in Frederick, Maryland. The requirement mandates exact conformity to the Schneider Electric brand, with no substitutions allowed, to ensure seamless interoperability with the existing UPS system model GVMSB225KG65S and its配套 battery cabinet UNC5-10999074, thereby preserving system integrity, minimizing lifecycle costs, and maintaining continuous manufacturer support. This acquisition is exclusively set aside for small business concerns under NAICS code 238210 and is issued as a Firm-Fixed-Price solicitation under the Revolutionary FAR Overhaul framework. All terms and conditions are governed by incorporated provisions referenced from www.acquisition.gov, and responses must strictly adhere to the specified delivery location and technical specifications. Responses are due no later than Friday, August 7, 2026, at 12:00 p.m. Eastern Time, submitted via email to salah.hani@fema.dhs.gov, and must include full company details, UEI#, and contact information. Late or incomplete submissions will not be accepted, and no further questions will be entertained after the deadline of July 31, 2026, at 10:00 a.m. ET. The government reserves the right to cancel or amend the solicitation at any time prior to award and will not bear any costs incurred by vendors during preparation. No binding contract exists unless a formal order is executed by a warranted Contracting Officer. The solicitation number is 70FB7026Q00000028, and the point of contact for inquiries is Salah Hani of FEMA, Department of Homeland Security.

POSTED

about 7 hours ago

DEADLINE

USCG YARD AUDIO SYSTEM REPLACEMENT

Solicitation # 31800QU260041642

The U.S. Coast Guard, through the Surface Forces Logistics Center, is soliciting competitive quotations for the replacement of the audio system at the Gymnasium in Building 144, located at 2401 Hawkins Point Road, Baltimore, MD 21226, under a Firm Fixed Price Purchase Order. This solicitation, identified as 31800QU260041642, is issued as a combined synopsis and solicitation under FAR Subpart 12.6 for commercial items and is restricted to small businesses as a total set-aside under NAICS code 238210. Vendors must conduct a mandatory site visit to be eligible to bid, and must coordinate this visit with Point of Contact LT Corinne Jacobson. Quotes must be submitted via email to GABRIEL.O.JASBON@USCG.MIL no later than August 14, 2026, at 10:00 AM Eastern Time, with the solicitation number clearly included in the subject line. The required deliverables include a fully functional turnkey installation of a commercial audio system consisting of specific branded equipment—including four JBL 15” loudspeakers, one Origin Acoustics 750-watt amplifier, one Shure dual-channel wireless microphone system, one JBL CSM-28 commercial mixer, one LFI USA Zen Air Bluetooth receiver, and an eight-outlet power conditioner—plus approximately 700 feet of 14/2 direct burial speaker cable. All work must include removal of existing equipment, installation, wiring, testing, commissioning, operator training, delivery of as-built diagrams, equipment inventory, warranty documentation, and an operational test report. All equipment must meet or exceed specified performance requirements for uniform audio coverage, speech intelligibility, Bluetooth, and wireless microphone functionality. A professional-engineer-approved drawing must accompany each quote, and all proposed equal products must include manufacturer specifications. Payment will be made via Government Purchase Order under Net 30 terms upon acceptance, with no down payments or advance funding permitted; vendors must secure their own financing until delivery and acceptance. Invoices must be submitted through IPP.gov and include required elements such as PO number, vendor invoice number, CAGE code, item description, unit prices, and extended totals, with separate freight invoices required for shipping costs of $100 or more. The vendor must designate a Key Project Manager as the single point of contact for the

Sflc Procurement Branch 3(00040)

POSTED

about 7 hours ago

DEADLINE

Clearance Gauge System Installation

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Navigation Lighting System Installation and Maintenance

POSTED

about 14 hours ago

DEADLINE

in about 1 month

VADOC Headquarters Electric Vehicle Charging Stations 799-18403-002

Solicitation # IFB-124269

The contract involves the installation of electric vehicle charging stations at the VADOC Headquarters parking lot located at 6900 Atmore Drive in Richmond, Virginia. The solicitation, identified by number IFB-124269, was posted on July 13, 2026, with a response deadline of August 5, 2026. This procurement is being managed by the Virginia Department of Corrections through its Architecture and Engineering office and falls under the SLED classification, indicating it is targeted at state, local, or educational entities. All work must be performed at the specified site in Richmond, and the project is intended to support the transition to electric vehicle infrastructure by adding dedicated charging capabilities to the existing parking facilities. Laura Griffith from the Virginia DOC serves as the point of contact for this solicitation, reachable via phone at 804-887-7771 or email at laura.griffith@vadoc.virginia.gov. There is no set-aside designation specified, and no NAICS code is provided in the contract data. Interested parties are directed to the vendor portal link for full solicitation details and submission instructions. The contract is open to qualified vendors capable of delivering and installing EV charging infrastructure in compliance with all applicable standards and requirements.

DOC - Architecture and Engineering

POSTED

about 14 hours ago

DEADLINE

Electrical Wiring and Controls Integration

Northlands Job Corps Center /ETR

POSTED

about 15 hours ago

DEADLINE

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

Diving,Reel and Light,Signal

Solicitation # W8482-275400/A

The Department of National Defence is seeking bids for the supply of diving reels and signal lights to be delivered to Canadian Forces Base Halifax in Nova Scotia and Canadian Forces Base Esquimalt in British Columbia. Two line items each for diving reels and signal lights are specified: 100 diving reels with part number DITD-REEL-001 and 400 signal lights with part number 450STROBE-MT, with equal quantities allocated to each base. Both items are assigned the same GSIN code N7810, and the manufacturers are JULIAN JAMES RICHARD TAYLOR for the diving reels and PACIFIC SCUBA INDUSTRIES for the signal lights. Bidders wishing to propose equivalent or substitute products must provide the brand name, model, part number, and NCAGE code of the alternate item. All bids must be submitted on a Delivery Duty Paid basis, meaning the supplier is responsible for all costs and risks until delivery at the specified locations. The solicitation, numbered W8482-275400/A, was posted on July 24, 2026, with a response deadline of August 10, 2026, and documents may be submitted in either English or French. The contracting authority is Funto Oyebolu, and the Crown reserves the right to engage in further negotiations with suppliers following the bidding process.

POSTED

about 14 hours ago

DEADLINE

Office furniture sub-category 2 - Desk - Base Only

Solicitation # W6766-26-CS089

This solicitation under Supply Arrangement E60PQ-140003/D seeks the supply of electronic height-adjustable desk bases categorized as Product Sub-Category 2, for delivery to 60 Moodie Drive in Ottawa, Ontario, within the National Capital Region. Only suppliers who are already pre-qualified under this specific supply arrangement are eligible to bid directly; non-SA holders may submit proposals but must simultaneously apply for and secure the applicable supply arrangement prior to award, and the government is under no obligation to delay award pending their qualification. The desk bases must be electronically adjustable with a height range of 28.3 inches to 46.5 inches and compatible with tabletops measuring between 39.4 and 63 inches in length and 23.6 to 27.6 inches in depth, with functional equivalence to the specified product allowed if all technical criteria are met. Delivery is mandatory to the designated location, and installation is handled exclusively by Public Services and Procurement Canada, with no responsibility placed on the supplier. The requirement carries no security clearance obligations, and no specific packaging, marking, or invoicing instructions are detailed. The solicitation closes on August 10, 2026, and responses must be submitted electronically through the Government Electronic Tendering Service. Contract award is not guaranteed to follow lowest price technically acceptable principles, and no formal evaluation factors, weights, or contract value estimates are disclosed. The contracting authority is Gabriella Sabou, and general inquiries regarding supplier qualification may be directed to the designated procurement email. No contract clauses, representations, certifications, or accounting data are included within the provided documentation.

Wood Office Furniture Manufacturing

POSTED

about 14 hours ago

DEADLINE

Snap-On Versatest Digital Monitor

Solicitation # W8486-270946/A

The Department of National Defence, through the Government of Canada, is seeking to procure Snap-On Versatest Digital Monitors under solicitation number W8486-270946A, with a response deadline of August 8, 2026. Each unit must be accompanied by a Certificate of Calibration dated no more than 90 days prior to delivery, which is scheduled for January 15, 2027. The solicitation was posted on Buyandsell on July 23, 2026, and remains open for 15 calendar days to allow for submissions. All offers must be directed to Viktoria Melnichuk, the Contracting Authority, via email at viktoria.melnichuk@forces.gc.ca or by phone at 613-302-1534. The place of performance is in Canada, and no specific set-aside or NAICS code is indicated for this procurement.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 14 hours ago

DEADLINE

Solicitation # W8482-275277/A

The Department of National Defence is seeking bids for two identical gaskets, part number M2000471, manufactured by ONDA SPA, with each line item requiring a quantity of 75 units to be delivered to CFB Halifax, Nova Scotia and CFB Esquimalt, British Columbia respectively. These items fall under GSIN 5330 and NCAGE A5900, and bidders may propose equivalent or substitute products provided they clearly specify the brand, model, part number, and NCAGE of their alternative offering. The procurement is subject to a preference for Canadian goods and services, and all bids must be submitted on a Delivery Duty Paid basis, meaning the supplier is responsible for all costs and risks until delivery at the specified locations. The solicitation, identified by number W8482-275277/A, was posted on July 24, 2026, with a response deadline of August 11, 2026. Documents may be submitted in either official language of Canada, and the Crown reserves the right to negotiate with any supplier. Primary contact for inquiries is Keith Provick, Contracting Authority, reachable via email at keith.provick@forces.gc.ca.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

Refuellers and Aerial Devices Vehicles Spare Parts

Solicitation # W8486-270862/A

The Department of National Defence is seeking bids for spare parts required for Refuellers and Aerial Devices Vehicles, with delivery mandated to 25 Canadian Forces Supply Depot in Montreal, Quebec and 7 Canadian Forces Supply Depot in Edmonton, Alberta on or before November 30, 2026. The procurement covers 42 distinct line items including screws, gaskets, seals, couplings, filters, lighting components, terminal boxes, ground rods, regulators, switches, and hose reels, each identified by National Stock Number (NSN), General Supply Identification Number (GSIN), part number, and CAGE code. All items must be new, conform to the latest approved drawings and specifications as of the offer closing date, and be marked with the manufacturer’s name and part number either stamped, etched, or affixed via high-standard adhesive label. Packaging must adhere to Canadian Forces specifications—items listed must be single-unit packaged under D-LM-008-036/SF-000, while specific items like the nozzle require compliance with D-LM-008-001/SF-001 and D-LM-008-002/SF-001 marking standards. Palletization is required for shipments exceeding 0.566 cubic meters or 15.88 kilograms, using standard 1.22 m x 1.02 m wood pallets with four-way forklift access, a maximum height of 1.19 meters, and no more than 2.54 cm of overhang, with items grouped by stock number and mixed loads clearly labeled. All wood packaging must meet ISPM 15 standards. Bids must be submitted electronically via email to DLP53BidsReceiving.DAAT53receptiondessoumissions@forces.gc.ca by 2:00 PM EDT on July 11, 2026, and structured into four sections: technical offer, financial offer, completed submission and declaration forms, and additional information. Offerors must provide the exact part number and CAGE code for each item, and may propose equivalent or substitute products with full identification. The award will be based on the lowest evaluated price across all NSNs, with strict pass/fail criteria requiring full compliance with mandatory technical specifications—failure to supply correct part numbers will result in non-compliance. All items are to be delivered under DDP Incoterms 20

Motor Vehicle Supplies and New Parts Merchant Wholesalers

POSTED

about 14 hours ago

DEADLINE

NFS(Pacific) Seating

Solicitation # W0103-19103199

The Department of National Defence is seeking the purchase, delivery, and installation of office seating—specifically rotary chairs and stools—at CFB Esquimalt in Victoria, British Columbia, under Supply Arrangement E60PQ-120001/H. The requirement is solicited through the General Stream of pre-qualified suppliers, with non-SA holders eligible to bid only if they simultaneously apply for and receive a supply arrangement from the Supply Arrangement Authority; however, contract awards will not be delayed pending such evaluations. All work must be completed and accepted by October 31, 2026, with the contract term extending through October 31, 2027. Deliveries are required under DDP Incoterms® 2020 to the Naden Building NAD092, meaning the contractor assumes all costs and risks until goods are installed at the site. The award will follow a Lowest Price Technically Acceptable (LPTA) methodology, where only offers meeting all mandatory technical, environmental, and compliance requirements are eligible, and the lowest-priced compliant bid receives the award. Offerors must certify compliance with Canadian Content, environmentally preferable packaging standards (requiring reusable, returnable, or recyclable materials), and anti-forced labor provisions, and must submit completed Offer Submission and Declaration Forms. There are no security requirements, no key personnel specifications, and no organizational conflict of interest clauses beyond general Code of Conduct adherence, but contractors must notify Canada within ten days of any change in their place of business to maintain Canadian Supplier status. Invoices must include the contract number, client reference, procurement business number, and certification of delivery and accuracy, and must be submitted electronically. All records must be retained for up to seven years after final payment for audit purposes. Proposals must be emailed to Ila.Jordan@forces.gc.ca by August 7, 2026, using the Government Electronic Tendering Service for amendments and updates, and can be submitted in English or French.

Institutional Furniture Manufacturing

POSTED

about 14 hours ago

DEADLINE

CFSME Out-Service Training: Plumbing and Heating Technician (PH Tech)

Solicitation # W2037-27-0421/A

The Department of National Defence is seeking qualified suppliers to deliver out-service training for the DP1 Plumbing and Heating Technician trade at the Canadian Forces School of Military Engineering, with the course scheduled to begin on 6 October 2026. The training must be conducted by an accredited academic institution at a recognized post-secondary vocational institute, and all instructional content and delivery standards must be provided and supervised by such an institution. This procurement is governed by the Policy on Reciprocal Procurement, limiting eligibility to Canadian suppliers and suppliers from designated trading partners, as defined in the solicitation’s annex. The requirement is issued under Solicitation Number W2037-27-0421/A, with responses due by 21 August 2026. The contracting authority is Maura Archibald, who can be reached at Maura.Archibald@forces.gc.ca, and the Crown reserves the right to negotiate terms with any submitted offers. The training will be delivered across one of the three Atlantic Canadian provinces: New Brunswick, Nova Scotia, or Prince Edward Island.

Apprenticeship Training

POSTED

about 14 hours ago

DEADLINE

IT Professional Services

Solicitation # W8485-27-TBIPS-KB14501

This procurement is open exclusively to pre-qualified suppliers under the Task Based Informatics Professional Services (TBIPS) agreement, specifically those holding Tier 1 status under EN578-170432, and requires the provision of three senior-level professional services: one Network Support Specialist (Level 3) for Stream 4, one Telecommunication System Specialist (Level 3) for Stream 7, and one Applications/Software Architect (Level 3) for Stream 1. The work is to be performed primarily at CFB Trenton and Astra in Ontario and demands a Secret security clearance for all personnel, with no document safeguarding requirements beyond the clearance. The estimated effort totals 600 person-days annually—240 days each for the Network and Telecommunications specialists and 120 days for the Software Architect—over a four-year contract period running from August 2026 to July 2030. Only suppliers listed in the pre-qualified roster, including major firms such as IBM Canada, Calian Ltd., and TEKSYSTEMS CANADA CORP., are eligible to respond, and the Request for Proposal documents will be distributed directly by the Department of National Defence to these invited entities; they are not accessible via the government’s public tendering portal. Proposals must be submitted by August 26, 2026, and may be submitted in either English or French.

POSTED

about 14 hours ago

DEADLINE

Tracked Excavator

Solicitation # W8476-277193/A

The Department of National Defence is seeking to procure three tracked excavators for delivery to Canadian Forces Base Trenton, Borden, and Esquimalt, with an optional additional three units also available, all to be delivered within Canada within 180 days of contract award. While Trenton is listed as a delivery point, it serves only as a transitory location, as the final destination for one unit is CFS Alert in Nunavut, with the Crown assuming full responsibility for transporting the equipment from Trenton to Alert. This procurement is governed by the Nunavut Land Claims Agreement, underscoring the importance of compliance with Indigenous land rights and related obligations. Offers must be submitted electronically by the deadline of September 16, 2026, to the specified government email address, and may be submitted in either English or French. The Crown reserves the right to negotiate terms with suppliers, and all submissions are to be directed through the designated contracting authority, Dong Le, whose contact details are provided in the solicitation.

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Personal Locator Beacon

Solicitation # W3996-26008/A

The Department of National Defence is seeking to procure 192 units of the Buoyant Personal Locator Beacon, ResQLink 400PLB, identified by GSIN N4220 and NSN 2921:18560, for delivery to Tactical Helicopter Squadrons across Canada according to specified dates and addresses outlined in the annex. Equivalent products that match the form, fit, function, and quality standards of the specified item are acceptable for consideration, allowing suppliers to propose alternatives as long as they meet the required performance criteria. The solicitation, identified by number W3996-26008/A, was posted on August 7, 2026, with bids due by September 2, 2026, and the Crown reserves the right to negotiate terms with any qualified suppliers. All documentation may be submitted in either English or French, reflecting Canada’s official languages. The contract is managed by the Government of Canada under the Department of National Defence, with Emma Ringor serving as the primary point of contact for inquiries, reachable via email or phone. Performance of the contract will occur across various locations within Canada, with no single fixed delivery address specified beyond the squadron locations listed in the annex.

POSTED

about 14 hours ago

DEADLINE

Evaporative Cooler requirement

Solicitation # W3915-27-0012

The Department of National Defence is seeking proposals for the supply of five portable evaporative coolers, each required to effectively cool an area of 6500 square feet while weighing no more than 225 pounds. The solicitation, identified by number W3915-27-0012, was posted on July 29, 2026, with responses due by August 18, 2026. Proposals may be submitted in either English or French, and there is no security clearance requirement for suppliers. The equipment is intended for use in New Brunswick and Nova Scotia, and the Crown reserves the right to engage in negotiations with interested suppliers. All correspondence and submissions should be directed to Timothy Herrington, Contracting Authority, at procurementCADTC@forces.gc.ca.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

Solicitation # W0127-26-P016

The Department of National Defence is soliciting bids for the procurement of 200 institutional-grade mattresses—100 twin size and 100 queen size—to support lodging at CFB Edmonton, with delivery required no later than 1 September 2026. Only Canadian suppliers, as defined in the solicitation’s annex, are eligible to bid; offers from non-trading partner nations will be rejected. Each mattress must be new, unused, and meet strict technical specifications including a minimum 8-inch thickness, medium to medium-firm firmness, reinforced edges, a 250 lb weight capacity, stain-resistant and removable cover, compliance with Canadian fire safety standards, and a minimum five-year manufacturer warranty. All bids must include documentation demonstrating compliance with these mandatory criteria; failure to meet any requirement renders the offer non-responsive. The procurement follows a best-value trade-off approach, considering both technical acceptability and price, though no specific weighting or rating scale is disclosed. Packaging must adhere to ISO 21067-1:2016 standards, with contractors responsible for ensuring secure, protective containment during transport, though no specific materials, dimensions, or labeling requirements are detailed. Preservation methods, marking, and barcoding are not specified. Delivery is to be made to CFB Edmonton, with acceptance performed upon arrival. Payment will be processed by the Receiver General for Canada via electronic methods such as Direct Deposit or Wire Transfer, and invoicing may be submitted electronically via EDI, though no specific platforms like WAWF or IPP are required. Proposals must be submitted through the Government Electronic Tendering Service by 17:00 Eastern Time on 17 August 2026, using the required annexes for Offer Submission and Offeror Certification. Bidders must certify compliance with the Federal Contractors Program for Employment Equity and disclose any disqualifying integrity issues via the Integrity Declaration Form. No security clearances, key personnel, contract options, or OCI provisions apply. The contract is inferred to be fixed-price, with pricing submitted by offerors in the absence of any stated budget or estimated value.

Mattress Manufacturing

POSTED

about 14 hours ago

DEADLINE