Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Electrical Permitting and Code Compliance Services

Active

Federal

Response Deadline08/27/2026, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks a qualified small business to provide electrical permitting and code compliance services for a generator installation in Waco, Texas, ensuring full adherence to the National Electrical Code, National Park Service standards, and local regulations. The contractor will be responsible for obtaining all necessary local electrical permits, scheduling and coordinating inspections, and verifying that all installation practices meet mandated safety and regulatory requirements. This work is critical to the lawful and safe deployment of the generator system within the specified jurisdiction. This subcontract is set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside program and is classified under NAICS code 541330 for architectural and engineering services. The solicitation was posted on July 27, 2026, with bids due by August 27, 2026. The place of performance is clearly defined as Waco, TX, with a ZIP code of 76708, and the agency executing the contract is the Department of the Interior through its Mwr Midwest Region. The contractor must be prepared to operate in compliance with federal procurement guidelines while maintaining close coordination with local authorities to ensure seamless project execution.

General Info

Small business to provide electrical permitting and code compliance for generator installation in Waco, TX, per NEC and federal standards.

Agency

Department Of The Interior → Mwr Midwest REGION(60000)View Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Waco, TX, 76708, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineAug 27

Submission deadline

Response Deadline

08/27/2026, 02:00:00 PM UTCin 30 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Interior → Mwr Midwest REGION(60000)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of The Interior → Mwr Midwest REGION(60000)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Obtain local electrical permits, coordinate inspections, and ensure compliance with NEC, NPS standards, and Waco, TX regulations for the generator installation.

Similar Contracts

Same NAICS industry code

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide comprehensive Construction Management services under an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract for the planning, design, construction, and closeout phases of its major construction initiatives. This includes support for a variety of project delivery methods such as Design Build, Progressive Design Build, and other alternative delivery models, ensuring projects meet authorized schedules, budgets, and quality standards. The scope is broad and encompasses multiple large-scale infrastructure efforts across the Port’s operations, requiring experienced management teams capable of navigating complex public sector construction environments. Contract awards will be made under NAICS code 541330, and performance is expected to occur at various Port locations without a specified primary place of performance. The contract will be managed through the Port’s Construction Management team, with primary contact information provided through Hala Rabbo and Project Manager Ann Davidson for direct inquiries. As this is a forecasted solicitation posted in July 2026, it indicates an upcoming procurement opportunity, and interested parties are encouraged to monitor the official Port of Seattle procurement portal for formal solicitation release and submission deadlines.

Construction Management

POSTED

about 6 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test/adjust/balance, controls, and regulatory support services across Seattle-Tacoma International Airport’s facilities and infrastructure systems, operating within a demanding 24/7/365 environment. The scope includes identifying and correcting deficiencies in mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems to enhance performance, efficiency, reliability, comfort, and longevity while ensuring compliance with safety and regulatory standards. All work will be structured and directed through Service Directives, requiring close collaboration with Aviation Facilities and Infrastructure to meet defined deliverables and operational objectives. The contract is an indefinite-delivery/indefinite-quantity (IDIQ) under NAICS code 541330, issued by the Port of Seattle’s Aviation Facilities & Infrastructure division. Primary point of contact is Jason Gates, with Jim Farris serving as Project Manager. The work will be performed at the airport, and all engagement will be managed through the Port’s procurement portal, with no set-aside provisions specified. The solicitation was posted on July 28, 2026, and responses are expected to align with the airport’s high-demand operational environment and stringent regulatory expectations.

Aviation Facilities & Infrastructure

POSTED

about 6 hours ago

DEADLINE

Quality Assurance and ISO 9001 Compliance SupportThe contract requires comprehensive quality system oversight to maintain strict adherence to ISO 9001:2015 standards, focusing on internal audits, corrective action management, and preparation of Certificate of Conformance and Quality Control documentation for government acceptance at the point of origin. The work is integral to ensuring that all deliverables meet the rigorous quality expectations of the Department of Defense, particularly under the Defense Logistics Agency’s oversight, with an emphasis on systemic compliance rather than isolated inspections. This subcontract falls under NAICS code 541330, indicating specialized scientific and technical consulting services related to quality assurance. Performance is tied to meeting federal acceptance criteria at origin, requiring continuous monitoring, documentation rigor, and proactive resolution of nonconformities. The contract is posted for potential bidders as of July 28, 2026, with no stated set-aside designation, and the place of performance details are not yet specified, though the primary accountability lies with supporting DLA’s quality assurance framework for defense supply chain integrity.

Defense Logistics Agency

POSTED

about 8 hours ago

DEADLINE

Counterfeit Electronic Parts Detection System ImplementationThe contract seeks the development and maintenance of a detection and avoidance system designed to identify and prevent the infiltration of counterfeit electronic components within the RF assembly supply chain. This effort is critical to ensuring the integrity and reliability of defense-related electronic systems by implementing advanced technologies that can authenticate components at various stages of procurement and assembly. The system must support real-time detection capabilities, integrate with existing supply chain workflows, and provide auditable logs to meet stringent defense standards for component traceability and provenance. The contractor will be responsible for ongoing system updates, calibration, and support to adapt to evolving counterfeit methods and emerging component technologies. This is a small business total set-aside subcontract under NAICS code 541330, indicating it is reserved exclusively for small business concerns as defined by the SBA. The solicitation was posted on July 28, 2026, with responses due by August 7, 2026, and is managed by the ASC Commodities Division under the Department of Defense. While the place of performance and point of contact details are not specified, the work is expected to support defense supply chain operations, with performance likely requiring collaboration with government stakeholders and adherence to federal acquisition regulations. The emphasis is on innovation, rapid deployment, and sustainable maintenance to ensure long-term resilience against counterfeit threats in high-stakes RF applications.

ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

Quality Assurance and Source Inspection ServicesThe contract requires comprehensive quality assurance and source inspection services to ensure all supplied materials and components strictly adhere to MIL-STD-1916 or ASQ H1331 sampling plans with zero non-conformance acceptance criteria as mandated by the Defense Logistics Agency. Inspections must be conducted both during production and at final delivery to verify that every item meets the rigorous military standards and maintains an absolute absence of defects. This subcontract is part of a broader Department of Defense initiative under the ASC SUPPLIER OPER AE AND AF DIV and is assigned the NAICS code 541330 for professional, scientific, and technical services related to quality control. The offeror must be prepared to execute inspections at various points in the supply chain with precision and documentation rigor to meet the zero-tolerance compliance requirements. Proposals are due by August 27, 2026, and the work will support critical defense logistics operations, emphasizing reliability and adherence to federal quality benchmarks.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

Quality Inspection and SPRS Compliance SupportThis contract supports independent quality inspection, sampling, and SPRS compliance activities to ensure adherence to military standards and satisfy prime contractor evaluation criteria. The work is designated as a total small business set-aside under SBA guidelines, meaning only small businesses are eligible to bid, and it falls under NAICS code 541330 for engineering services. The solicitation was posted on July 28, 2026, with a response deadline of August 7, 2026, and is issued under the ASC Commodities Division of the Department of Defense. Performance location details are not specified, but the work is intended to support DOD procurement quality assurance objectives. The contract is structured as a subcontract, indicating it will be part of a larger prime contract ecosystem focused on supply chain compliance and inspection validation.

ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

Quality Inspection and Source Acceptance at OriginThe contract requires comprehensive quality inspection services at the manufacturer’s facility to support government-origin inspections, ensuring full compliance with AS9100 standards and all specified technical requirements. First-article and batch inspections are mandatory to verify conformance prior to shipment, serving as a critical checkpoint for acceptance by defense logistics authorities. The work is performed under a subcontract tied to the Defense Logistics Agency, operating under the Department of Defense, with the NAICS code 541330 indicating engineering and technical services related to quality assurance. All inspections must align with stringent defense procurement protocols, emphasizing precision, documentation, and traceability throughout the manufacturing process. The contract is active as of July 28, 2026, and is linked to award number SPE7L326P5097.

Defense Logistics Agency

POSTED

about 8 hours ago

DEADLINE

Quality Assurance & Inspection ServicesThe contract requires the provision of quality assurance and inspection services for wiring harnesses, with strict adherence to MIL-STD-1916 or ASQ Z1.4 standards for both in-process and final inspections. The primary objective is to achieve zero non-conformances, ensuring that all products meet the highest quality benchmarks expected by the Department of Defense. Inspections must be meticulously documented and aligned with Government Product Verification Testing protocols to support verification and validation efforts, reinforcing the integrity of the delivered assemblies. The work is structured as a subcontract under the NAICS code 541330 and is managed by the ASC Commodities Division, indicating its critical role in the defense supply chain. The solicitation, posted on July 28, 2026, requires responses by August 7, 2026, and the place of performance is unspecified, suggesting flexibility or classification. While no set-aside details or point of contact are provided, the emphasis on zero defects and compliance with military standards underscores a high-stakes, precision-driven mission critical to national defense systems.

ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

Water Quality Model Development And AnalysisThe City of Glendale, California, through its Glendale Water & Power division, has issued a solicitation for the development and analysis of a water quality model, with a contract value of $16. The solicitation, numbered 20260727028, was posted on July 28, 2026, and requires responses no later than August 17, 2026, at 9:00 PM Pacific Time. The work falls under NAICS code 541330, indicating engineering services, and is intended for performance in Glendale, California, with a specified zip code of 91206. The procurement is categorized under SLED government type, representing state, local, or educational entities, and no set-aside provisions are specified. Primary point of contact for inquiries is Alex Guerrero, reachable via email at aleguerrero@glendaleca.gov or by phone at 818-463-8863. All submissions and communications must be directed through the official BidAmerica portal linked in the solicitation.

City Of Glendale, California Glendale Water & Power

POSTED

about 10 hours ago

DEADLINE

Professional Airport Consultant Planning Services Corning Municipal AirportThe City of Corning, California is soliciting professional airport consultant planning services for the Corning Municipal Airport under solicitation number 20260727023, with a bid amount of $16. The opportunity is classified under NAICS code 541330, indicating architectural and engineering services related to airport infrastructure planning. The solicitation was posted on July 28, 2026, and responses are due by August 12, 2026, at 9:00 PM Pacific Time. The contract is targeted toward firms capable of providing expert planning and consulting services specific to municipal airport development and operations. The place of performance is located in Corning, California, with a zip code of 96021, and the primary point of contact for inquiries is Elijah Stanley, reachable via email at estanley@corningca.gov. The procurement is issued under a state and local government entity and does not specify any set-aside program for small or disadvantaged businesses. All proposals must be submitted through the official BidAmerica platform linked in the posting.

City of Corning

POSTED

about 10 hours ago

DEADLINE

Professional Airport Consultant Engineering Services Corning Municipal AirportThe City of Corning, California, is soliciting professional engineering consulting services for the Corning Municipal Airport under solicitation number 20260727022, with a bid amount of $16. The contract is classified under NAICS code 541330 for architectural and engineering services and is targeted at state, local, or education entities. The solicitation was posted on July 28, 2026, and responses are due by August 12, 2026, at 10:00 PM Pacific Time. All services are to be performed at the airport located in Corning, CA, with the zip code 96021. Elijah Stanley, the primary point of contact, can be reached at estanley@corningca.gov for questions or further information regarding the bid requirements and submission process. The opportunity is open to qualified firms with expertise in airport-related engineering consulting, and all submissions must be received by the stated deadline to be considered.

City of Corning

POSTED

about 10 hours ago

DEADLINE

NOTICE TO ENGINEERING FIRMS REGARDING A REQUEST FOR QUALIFICATIONS AND LETTERS OF INTEREST FROM TDOT PRE-QUALIFIED FIRMSThe City of Murfreesboro is inviting pre-qualified engineering firms to submit Letters of Interest for a transportation-related project through its OpenGov e-Procurement Portal, with submissions due by August 18, 2026, at 7:00 PM Central Time. This solicitation, identified as RFQ-07-2026-LOI, is specifically targeted at firms already pre-qualified by the Tennessee Department of Transportation, ensuring only eligible and vetted professionals may respond. The project falls under the Transportation/Transit sector and is administered by the City’s municipal office in Murfreesboro, Tennessee, with performance expected within the state of Tennessee. Interested firms must submit their expressions of interest via the designated online portal, and all inquiries should be directed to Megan Strode, Assistant Director, or Cathy Smith, Purchasing Director, using the provided contact details. The solicitation does not specify a particular NAICS code or set-aside designation, indicating an open competition among TDOT-prequalified firms without restrictions based on business size or ownership type. The notice was posted on July 28, 2026, providing a three-week window for submissions, and the procurement process is initiated at the local government level under the jurisdiction of the State of Tennessee.

Transportation/Transit

POSTED

about 10 hours ago

DEADLINE

More opportunities from Department Of The Interior → Mwr Midwest REGION(60000)

Same awarding agency

Hazardous Materials Handling and Safety DataThe contract requires the identification, labeling, and proper management of hazardous materials including fuel, lubricants, and batteries used during the installation process, with strict adherence to safety protocols. The contractor must provide current Safety Data Sheets for all hazardous substances and maintain a comprehensive spill response plan to ensure rapid and effective containment and cleanup in the event of an incident. This subcontract is part of a Total Small Business Set-Aside under SBA guidelines, reserved exclusively for small businesses as defined by federal regulations, and is classified under NAICS code 562910 for waste collection and treatment services. Performance is required in Waco, Texas, with a response deadline of August 27, 2026, and the contracting authority is the Department of the Interior’s Mwr Midwest Region.

Remediation Services

POSTED

DEADLINE

Labor Compliance and Payroll Reporting (Copeland Act)This contract requires strict adherence to the Copeland Act by maintaining and submitting certified payroll records for all workers on-site at the specified location in Waco, Texas, with a zip code of 76708. The contractor must accurately document wage rates, hours worked, and fringe benefits for every employee, ensuring full compliance with federal prevailing wage requirements. All records must be certified and submitted timely to meet regulatory standards and avoid penalties. The contract is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA are eligible to respond. It falls under the NAICS code 541211, indicating it relates to accounting, tax preparation, bookkeeping, and payroll services. The solicitation was posted on July 27, 2026, and responses are due by August 27, 2026, with no specified point of contact provided. The performing agency is the Department of the Interior, operating under the Mwr Midwest Region, and performance is exclusively tied to the Waco location.

Offices of Certified Public Accountants

POSTED

DEADLINE

Environmental and Site Compliance (Green Procurement)This contract requires adherence to federal green procurement standards for all materials and practices used during installation, emphasizing sustainability through the use of environmentally responsible products and methods. Contractors must provide comprehensive documentation verifying that all supplied items meet applicable federal guidelines for green procurement, ensuring transparency and compliance throughout the project lifecycle. The work is scoped to take place in Waco, Texas, with a zip code of 76708, and is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to bid. The NAICS code 541620 categorizes this as environmental consulting services, aligning with the focus on environmental compliance and sustainable practices. The opportunity was posted on July 27, 2026, with a firm deadline for responses on August 27, 2026, and is issued by the Department of the Interior through its Mwr Midwest Region office.

Environmental Consulting Services

POSTED

DEADLINE

Generator Equipment Supply (130 kW Unit)A 130 kW emergency generator, either new or certified used, is being procured for delivery to the Waco site with all necessary components including the fuel system, enclosure, and mounting skid. The contract is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA are eligible to respond, and it is classified under NAICS code 333611 for generators and generator sets. The solicitation was posted on July 27, 2026, with responses due by August 27, 2026, at 2:00 PM. The place of performance is specifically identified as Waco, Texas, with a zip code of 76708. The procuring agency is the Department of the Interior, under the MWRA Midwest Region, and the contract is accessible through the SAM.gov platform for further details.

Turbine and Turbine Generator Set Units Manufacturing

POSTED

DEADLINE

Emergency Generator InstallationA 130 kW emergency generator will be fully installed at a National Park Service location in Waco, Texas, encompassing all aspects of the project from site preparation and structural mounting to full electrical integration, proper grounding, and final commissioning. The work is scoped to ensure reliable backup power for critical operations at the site, with all installation standards and safety protocols strictly followed. This is a subcontract opportunity designated as a Total Small Business Set-Aside under SBA guidelines, exclusively available to small businesses, and is classified under NAICS code 238210 for electrical contracting services. The contract was posted on July 27, 2026, with responses due by August 27, 2026, at 2:00 PM, and the performance location is clearly identified as Waco, TX, with a zip code of 76708. The contracting agency is the Department of the Interior through its Mwr Midwest Region, though specific point of contact details are not provided in the posting.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

WACO Emergency GeneratorThe U.S. Department of the Interior through its MWR Midwest Region is soliciting proposals under solicitation number 140P6026Q0052 for an emergency generator to be deployed at a facility in Waco, Texas, with a zip code of 76708. This solicitation is a total small business set-aside as defined under FAR 19.5, meaning only small business concerns are eligible to respond, and it falls under the NAICS code 238210 for electrical contractors and other wiring installation contractors. The opportunity was posted on July 27, 2026, with a firm response deadline of August 27, 2026, at 2:00 PM Eastern Time. All proposals must be submitted through the SAM.gov platform, and inquiries should be directed to Bridget Parizek, the primary point of contact, via email at Bridget_Parizek@nps.gov or phone at 402-800-7927. The contract will be managed by the agency office located in Omaha, Nebraska, with the place of performance specifically designated in Waco, Texas.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Solicitation for Concession Opportunity for Lodging, Food and Beverage, Retail, Marina Services, and Mechanical Boat Portage within Voyageurs National ParkOn July 20, 2026, the National Park Service will issue a presolicitation for a ten-year concession contract to operate lodging, food and beverage, retail, marina services, and mechanical boat portage within Voyageurs National Park, with the solicitation number CC-VOYA002-27. Interested parties must register by providing contact information to Tracy Simmons at tracy_simmons@nps.gov to receive updates and amendments, and those planning to submit a proposal are required to file a Notice of Intent to Propose by 4:00 p.m. Central Time on September 16, 2026. All proposals must be submitted electronically through the Microsoft Teams platform by 4:00 p.m. Central Time on October 15, 2026, following the strict format outlined in the Proposal Instructions; hardcopy submissions or submissions via email or other platforms will not be accepted. Prior to submission, proposers must accept a Teams invitation sent to the email provided in their Notice of Intent. Additionally, a signed hardcopy of the Offeror’s Transmittal Letter must be physically delivered to the National Park Service in Omaha, Nebraska, no later than 4:00 p.m. Central Time on October 22, 2026. Questions regarding the prospectus must be submitted in writing by August 12, 2026, also to Tracy Simmons. The North American Industry Classification System code for this opportunity is 713990, and no set-aside preferences are in effect. Detailed guidance for preparing a competitive proposal is available on the NPS Concessions website.

All Other Amusement and Recreation Industries

POSTED

DEADLINE

Project Management & Subcontractor CoordinationThe contract titled Project Management & Subcontractor Coordination is a small business set-aside opportunity under the SBA Total Small Business Set-Aside program, designated by NAICS code 238990 for other specialized construction activities. It requires the contractor to oversee subcontractors, ensure full compliance with federal project plans, and submit all necessary project management documentation in accordance with federal standards. Performance of the work is focused in Chicago, Illinois, with the contracting agency being the Department of the Interior through its MWr Midwest Region. The opportunity was posted on July 10, 2026, and responses are due by August 10, 2026, at 5:00 PM Eastern Time. Only small businesses meeting SBA size standards are eligible to bid, and the contract is structured as a subcontracting arrangement under the federal procurement framework.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Illinois Special Activity Permit CoordinationThe contract requires the successful bidder to obtain and manage the Illinois Special Activity Permit through the Illinois Department of Natural Resources, ensuring full compliance with state environmental and land use regulations. This effort involves coordinating all necessary documentation, submissions, and communications with state authorities to secure and maintain permit approval, with a focus on adhering to procedural timelines and regulatory standards. The work must be performed in Chicago, Illinois, and all activities must align with the specific requirements tied to the permit type and applicable state laws. This is a small business set-aside subcontract under NAICS code 541690, designated for total small business participation as defined by FAR 19.5. The opportunity was posted on July 10, 2026, and responses are due by August 10, 2026. The contracting entity is the Department of the Interior, operating through the MWR Midwest Region. While no point of contact details are provided, bidders must submit proposals through the SAM.gov portal linked in the solicitation. Success will depend on demonstrated expertise in navigating Illinois permitting processes and a documented ability to manage regulatory compliance for special activities on state-managed lands or waters.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Historic Preservation Treatment & ComplianceThe contract titled Historic Preservation Treatment & Compliance is a small business set-aside under the SBA Total Small Business Set-Aside program, seeking a subcontractor to develop and submit a Historic Preservation Treatment Plan to the appropriate regulatory authority. The work must ensure full compliance with federal preservation laws, focusing on the appropriate treatment of historic properties within the scope of federal mandates. The North American Industry Classification System code for this contract is 541620, indicating it involves architectural and engineering services related to historic preservation. Performance of the contract is designated to occur in Chicago, with a zip code of 60628, and the contracting entity is the Department of the Interior under the Midwest Region. The solicitation was posted on July 10, 2026, and proposals must be submitted no later than 5:00 PM Eastern Time on August 10, 2026. There is no specified point of contact provided, and the contract is accessible through the SAM.gov platform. Subcontractors bidding on this opportunity must be certified small businesses eligible under the SBA guidelines and capable of delivering compliance-driven preservation documentation within the required timeframe and location.

Environmental Consulting Services

POSTED

DEADLINE

Electrical Power & Support SystemsThe contract involves the installation of electrical circuits, grounding systems, and surge protection infrastructure specifically to support Vehicle Monitoring System equipment in Chicago, with a zip code of 60628. It is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to respond, in accordance with SBA regulations under NAICS code 238210 for electrical contractors. The solicitation was posted on July 10, 2026, and all responses are due by August 10, 2026, at 5:00 PM. The agency managing the contract is the Department of the Interior through its Mwr Midwest Region, and the work is required to ensure the reliable and safe operation of critical monitoring systems through proper electrical conditioning and protection against power anomalies.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Security System Cabling & InfrastructureThe contract is for the installation of low-voltage data cabling infrastructure including fiber optic and Cat6 cabling, conduit systems, termination, and testing specifically for Video Management System components. The work is scoped under a subcontract and is designated as a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to bid. The North American Industry Classification System code is 238210, which corresponds to electrical and other construction installation. Performance of the work is required at a location in Chicago with a zip code of 60628, under the oversight of the Department of the Interior, Mwr Midwest REGION. The solicitation was posted on July 10, 2026, with a firm deadline for responses on August 10, 2026, at 5:00 PM. This infrastructure project is critical to supporting the functionality and reliability of security systems through properly engineered and tested cabling solutions.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE