Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Origin Inspection & Quality Assurance Services

Active

Federal

Response Deadline08/07/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves performing origin inspections at manufacturer facilities to ensure technical compliance with specifications, proper packaging in accordance with MIL-STD-129, and full documentation traceability. Each completed inspection qualifies the contractor for a $2,500 evaluation credit, serving as compensation for the verification services rendered. The work is critical to maintaining quality standards and supply chain integrity for Department of Defense procurements, requiring precise adherence to military standards and meticulous recordkeeping. This subcontract is issued by the DLA Maritime - Portsmouth under the NAICS code 541330, which corresponds to other professional, scientific, and technical services. Proposals must be submitted by August 7, 2026, at 5:00 PM EDT, with no set-aside designation applicable. The place of performance is not specified, indicating inspections may occur at various manufacturer locations worldwide. The opportunity is open to qualified subcontractors seeking to support defense logistics through rigorous quality assurance activities at the point of origin.

General Info

Origin inspections for DoD supplies; $2,500 credit per inspection; must comply with MIL-STD-129 and trace documentation.

Agency

Department Of Defense → DLA Maritime - PortsmouthView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

NH, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineAug 7

Submission deadline

Response Deadline

08/07/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Maritime - Portsmouth

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DLA Maritime - Portsmouth

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform origin inspections at manufacturer facilities to verify technical compliance, packaging per MIL-STD-129, and documentation traceability, qualifying for $2,500 evaluation credit per inspection.

Similar Contracts

Same NAICS industry code

MAGTF Staff Training Program (MSTP) Support ServicesThis solicitation is exclusively for Small Business SeaPort-NxG MAC holders, with no offers from non-MAC holders being considered. Proposals must be submitted through the Procurement Integrated Enterprise Environment (PIEE) Solicitation Module, requiring MAC holders to register for PIEE accounts to access the full RFP and submit responses. The requirement is to provide comprehensive support services for the Marine-Air Ground Task Force (MAGTF) Staff Training Program (MSTP), established under Marine Corps Order 1500.53B, to enhance the warfighting capabilities of senior commanders and staffs in Joint and Combined Task Force environments. Services span seven functional areas: Exercise Design, MAGTF Analytics, Modeling and Simulation, Documentation, Security, Command and Control/Information Management/Knowledge Management, and Communications and Information Systems, all governed by the Performance Work Statement and its Part 5 workbook. The contract is structured as a hybrid firm-fixed-price/cost-reimbursement instrument with a base period from March 27, 2027, through February 26, 2028, and up to five option periods extending performance through August 26, 2032. All work is to be performed at the Training and Education Command in Quantico, Virginia, with inspection and acceptance occurring at that location. Evaluation of proposals is based on three factors—Technical Expertise, Staffing Approach, and Price—with non-price factors being significantly more important than price, indicating a best-value trade-off selection process rather than lowest price technically acceptable. Offerors must demonstrate technical proficiency in specified PWS tasks, provide detailed staffing plans with qualified personnel and subcontractor information, and submit fair and reasonable pricing via the required Excel-based Pricing Proposal Workbook. Compliance with numerous FAR and DFARS clauses is mandatory, including protections for covered defense information, prohibitions on certain foreign-supplied telecommunications equipment, Buy American requirements, and trafficking in persons compliance. All offers must include current Unique Entity ID and CAGE codes, valid SAM registration, and attestations regarding small business status and socioeconomic certifications. Invoicing is exclusively through the Wide Area WorkFlow system using DoDAAC codes, and submissions require a two-step process: an initial written proposal with formatting restrictions and a final step involving PIEE upload and email submission of pricing, staffing matrices, and PowerPoint slides for oral presentations. Security requirements include adherence to DD Form 254, safeguarding controlled unclassified information, and identification of contractor personnel through badges and verbal disclosure. Subcontract

POSTED

about 3 hours ago

DEADLINE

Advance Notice: N6660426R3106 Code 45 Technical Engineering, Survivability, Testing, and Environmental Qualification Testing (EQT) Design (TESTED) ServicesThe U.S. Navy’s NUWC Division Newport is issuing a presolicitation for Technical Engineering, Survivability, Testing, and Environmental Qualification Testing (EQT) Design services under contract number N6660426R3106, with the solicitation set to be released in July 2026. This effort is designated as a Small Business Set Aside - Total, meaning only small businesses can compete, and it falls under NAICS code 541330 for Other Engineering Services. The work will involve providing engineered solutions to support system survivability, performance validation under extreme conditions, and comprehensive environmental qualification testing, ensuring military systems meet operational standards in harsh environments. All performance is expected to occur at Newport, Rhode Island, 02841. The primary point of contact for inquiries is Madison Rowland, who can be reached via email at madison.b.rowland.civ@us.navy.mil or by phone at 401-832-3648. The contract is managed under the Department of Defense, with the office located at the NUWC Division Newport facility in Rhode Island. This acquisition aims to secure qualified small business partners capable of delivering advanced testing and engineering support critical to maintaining naval system readiness and resilience. Prospective bidders should monitor the SAM.gov portal for the official solicitation, with the presolicitation notice available through the provided UI link to prepare for a competitive response.

Nuwc Division Newport

POSTED

about 3 hours ago

DEADLINE

MICROWAVE TUBE ENGINEERING SERVICEThe U.S. Naval Surface Warfare Center Crane is soliciting sole-source engineering support and gold tube testing services for microwave tubes under contract number N00164-26-Q-0254, with a closing date of 5 August 2026 at 12:00 PM Eastern Time. The requirement is designated as a sole-source procurement under FAR 13.106-1, as the services are critical to existing system integrations and have historically been provided by CPI Electron Device Business, with no intent to compete unless new information from other sources fundamentally alters the determination. All interested parties may submit capability statements, but the government retains full discretion to proceed without competition. Contractors must be currently registered in the System for Award Management (SAM) and must submit proposals via email to cassidy.k.shaw.civ@us.navy.mil by the deadline. The solicitation is issued under FAR Part 13, and no competitive set-aside is applicable; it falls under NAICS code 541330 for engineering services. All amendments or updates will be posted exclusively on SAM.gov, and it is the vendor’s responsibility to monitor that site. The point of contact for inquiries is Cassidy Shaw, and performance will take place at Crane, Indiana.

POSTED

about 3 hours ago

DEADLINE

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide comprehensive Construction Management services under an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract for a range of major construction projects. These services will support all phases of project execution, including planning, design, construction, and closeout, across multiple delivery methods such as Design Build, Progressive Design Build, and other alternative delivery models. The contractor will be responsible for ensuring projects adhere to authorized schedules, budgets, and quality standards while assisting the Port in delivering critical infrastructure. The work will be performed at various locations within the Port’s operational areas, with no specific geographic restrictions listed. The contract falls under NAICS code 541330, classifying it as Architectural, Engineering, and Related Services. The primary point of contact for inquiries is Hala Rabbo, reachable at 206-787-5565 or rabbo.h@portseattle.org, with additional support available from Project Manager Ann Davidson at 206-787-4070 or davidson.a@portseattle.org. The solicitation was posted on July 29, 2026, and is currently a forecast, indicating that formal solicitation documents will follow. Interested firms should monitor the Port’s official solicitation portal for further details and upcoming procurement steps.

Construction Management

POSTED

about 10 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test adjust and balance, controls, and regulatory support services across the facilities and infrastructure systems at Seattle-Tacoma International Airport, ensuring optimal performance of mechanical, HVAC, plumbing, lighting, direct digital controls, smoke control, and fire protection systems. The work centers on identifying and resolving operational deficiencies to enhance system efficiency, reliability, comfort, and longevity, all while maintaining compliance with safety and regulatory standards in a high-demand, 24/7/365 airport environment. Deliverables will be managed through Service Directives, requiring close collaboration with Aviation Facilities and Infrastructure to align execution with operational needs and performance goals. This contract is an indefinite-delivery, indefinite-quantity (IDIQ) vehicle issued by the Port of Seattle through its Aviation Facilities and Infrastructure division, classified under NAICS code 541330 for engineering services. Primary point of contact is Jason Gates, with Jim Farris serving as project manager, and all communications and inquiries should be directed through the provided contact details. The solicitation was posted in July 2026 and is intended to support ongoing and future infrastructure improvement initiatives at the airport, with performance centered on seamless integration within active airport operations without disruption.

Aviation Facilities & Infrastructure

POSTED

about 10 hours ago

DEADLINE

Electrical Engineering ServicesSaskatchewan Research Council is seeking proposals from qualified electrical engineering firms to provide professional services support at its Millar Avenue Facility. The solicitation, numbered 2627-014, was posted on July 28, 2026, with responses due by August 11, 2026. Proposals will be evaluated based on the firm’s experience, technical expertise, available resources, and overall suitability for the project. The selected vendor will work closely with SRC to define the specific tasks, scope, schedule, and budget following contract award. All work is to be performed at the Millar Avenue Facility in Saskatchewan, and inquiries should be directed to Roger Dauvin, the primary point of contact, via email or phone provided in the solicitation.

Saskatchewan Research Council

POSTED

about 17 hours ago

DEADLINE

Site Inspection and Quality Assurance ServicesThe contract seeks qualified providers to deliver site inspection and quality assurance services for projects under the jurisdiction of the Utah agency, ensuring strict adherence to contract documents, applicable codes, and regulatory requirements. Inspectors will work in close coordination with the Design and Facility Construction Management team and the Architect/Engineer to verify compliance at all stages of construction, identifying deficiencies and documenting corrective actions to maintain project integrity and safety standards. The opportunity is classified as a subcontract under NAICS code 541330, and responses must be submitted by September 10, 2026, with the solicitation posted on July 28, 2026. Performance is expected to occur within the State of Utah, though specific location details are not provided. The contract does not indicate a set-aside designation or designated point of contact, and interested parties should refer to the official Bonfire link for submission guidelines and additional requirements.

POSTED

about 17 hours ago

DEADLINE

in about 1 month

Inspection and Acceptance Support ServicesThe contract titled Inspection and Acceptance Support Services requires the performance of pre-delivery inspections, quality assurance testing, and complete documentation to ensure all delivered items fully comply with contractual specifications. All inspections must be conducted at the final destination, necessitating precise coordination with relevant parties to schedule and execute assessments upon arrival. The work is intended to validate that goods meet established standards before formal acceptance, with thorough reporting required to substantiate compliance. This subcontract is issued by Dallas Area Rapid Transit under the NAICS code 541330 and is open for response until the deadline of August 4, 2026. The place of performance is not specified in detail, but the work will occur at the delivery site within Texas. There is no set-aside designation, and the opportunity is posted on the BonfireHub platform with no designated point of contact listed. Interested parties must submit proposals before the deadline to be considered for award.

Dallas Area Rapid Transit

POSTED

about 17 hours ago

DEADLINE

Disadvantaged Business Enterprise (DBE) Participation and OutreachThe contract requires providers to deliver DBE-certified subcontracting services or support outreach and reporting efforts aimed at achieving the New Orleans Regional Transit Authority’s 32% system-wide Disadvantaged Business Enterprise participation target on federally funded transit projects. Entities must demonstrate the capability to either perform work as a DBE subcontractor or actively facilitate the inclusion of DBE firms through coordination, monitoring, and documentation that aligns with federal compliance standards. The effort is focused on ensuring equitable opportunities for disadvantaged businesses while meeting federal reporting obligations tied to transit infrastructure funding. This opportunity is categorized under NAICS code 541330 and is open for responses until August 25, 2026, with a posting date of July 28, 2026. Participants must be prepared to engage in detailed reporting and outreach activities that support the agency’s goal of equitable participation, with no specific set-aside designation outlined. All work is to be performed in support of RTA’s federally funded transit initiatives within the Louisiana region, and interested parties must ensure their DBE certification is current and recognized under federal guidelines. The contract does not specify a physical location for performance, indicating that services may extend across the agency’s broader transit network.

New Orleans Regional Transit Authority

POSTED

about 18 hours ago

DEADLINE

Engineering Design and Technical DocumentationThe contract requires the development of engineering drawings, technical specifications, operation and maintenance manuals, and related technical deliverables for experimental components of a transit system, all of which must comply with Federal Transit Administration and federal data rights standards. The work is part of a subcontract under the New Orleans Regional Transit Authority, with technical documentation needing to meet rigid federal compliance benchmarks to ensure interoperability, safety, and long-term maintainability of novel transit technologies. The deliverables are critical to supporting federally regulated public transportation innovation and must be structured to enable future oversight, audits, and data reuse under federal guidelines. The solicitation was posted on July 28, 2026, with a submission deadline of August 25, 2026, and is classified under NAICS code 541330 for engineering services. The place of performance and specific office details are not provided, but the work is tied to the Louisiana operations of the New Orleans Regional Transit Authority. The contract emphasizes adherence to federal data rights, meaning the recipient must manage intellectual property and data ownership in strict accordance with federal regulations, potentially limiting exclusive control over generated materials. Only responses submitted through the designated portal before the deadline will be considered.

New Orleans Regional Transit Authority

POSTED

about 18 hours ago

DEADLINE

Hampton Middle School Renovation Architectural and Engineering DesignPrince William County Schools is seeking qualified architectural and engineering firms to provide comprehensive design services for the renovation of Hampton Middle School located at 14800 Darbydale Ave. in Woodbridge, Virginia. The solicitation, identified as RFP-125217, was posted on July 28, 2026, with a response deadline of August 25, 2026, at 7:00 PM Eastern Time. This procurement is categorized under a state and local education (SLED) agency and does not specify a set-aside designation or NAICS code. Proposals must address all aspects of the facility’s renovation including but not limited to facility planning, structural, mechanical, electrical, and plumbing systems integration, and compliance with current building codes and educational standards. Lesley Dean of Prince William County Schools is the designated point of contact for inquiries and can be reached via email at deanlm@pwcs.edu or by phone at 703-791-8740. All submissions must be submitted through the official vendor portal linked in the solicitation details.

Prince William County Schools

POSTED

about 19 hours ago

DEADLINE

City of Oglethorpe CDBG 2027 RFPThe City of Oglethorpe, through the River Valley Regional Commission, is seeking qualified firms to provide engineering services for public infrastructure improvements including sewer, water, street, and drainage systems as part of its CDBG 2027 initiative. Proposals must be submitted by 3:00 p.m. on August 31, 2026, to the River Valley Regional Commission office located at 710 Front Avenue in Columbus, Georgia. The contract will be awarded to the most responsible offeror whose proposal is deemed most advantageous based on technical merit, experience, and value. This solicitation is designated as a Section 3 Covered Contract, which prioritizes opportunities for businesses that meet Section 3 criteria, encouraging participation from eligible local and disadvantaged business concerns. All inquiries and submissions should be directed to Will Griggs at the provided contact information, and the full solicitation details are available through the official state procurement portal.

River Valley Regional Commission

POSTED

about 21 hours ago

DEADLINE

in about 1 month

More opportunities from Department Of Defense → DLA Maritime - Portsmouth

Same awarding agency

Export Control Compliance (ITAR/EAR)The contract requires full compliance with U.S. export control regulations including the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR) to manage technical data and materials subject to these restrictions. Performance must adhere to DFARS 252.225-7048, ensuring that all export-controlled information and physical items are handled, stored, transmitted, and disposed of in accordance with federal defense contracting requirements. The work is classified as a small business set aside under NAICS code 541611, indicating it is specifically designated for small business concerns, and the place of performance is located in Kittery, Maine, with a ZIP code of 03904. The solicitation is issued by DLA Maritime - Portsmouth under the Department of Defense and requires responses to be submitted by August 6, 2026, with the posting date listed as July 28, 2026. The contract type is a subcontract, and all activities must align with strict U.S. national security protocols governing defense-related technical information.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Supply Chain Compliance and ReportingThis contract mandates strict compliance with federal regulations to ensure that no covered telecommunications equipment or services from restricted vendors are used in production systems. The contractor must submit all required representations under the FAR and DFARS to affirm adherence to these supply chain security requirements, demonstrating that their products and services are free from components or services linked to designated foreign adversaries. Compliance is not optional and failure to meet these obligations may result in contract termination or penalties. The contract is designated as a Small Business Set Aside under the SBA, with the NAICS code 541611 indicating it pertains to management consultancy services. It is issued by DLA Maritime – Portsmouth under the Department of Defense, with performance required at Kittery, NH, 03904. All responses must be submitted by August 6, 2026, at 2:00 PM, and the opportunity is open only to qualified small businesses as defined by SBA standards. The focus is firmly on securing the technical supply chain against foreign influence, with rigorous reporting and certification obligations to maintain eligibility.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Specialized Packaging and Preservation ServicesThe contract requires specialized packaging and preservation of powdered metal in strict compliance with ASTM D-3951 standards, ensuring the material is protected against environmental degradation during storage and transit. All packages must feature labeling that meets MIL-STD-129 requirements, clearly displaying the National Stock Number, the associated contract number, and the quality assurance designator to enable accurate tracking and regulatory adherence throughout the supply chain. The work must be performed by a small business as this is a Total Small Business Set Aside under NAICS code 312230, and the performance location is designated as Kittery, with a zip code of 03904. The opportunity was posted on July 28, 2026, and responses are due by August 6, 2026, at 2:00 PM, with the contracting authority identified as DLA Maritime - Portsmouth under the Department of Defense.

Tobacco Manufacturing

POSTED

DEADLINE

Materials Testing and Certification ServicesThe contract requires the provision of materials testing and certification services, specifically involving chemical analysis of materials and the issuance of certified test reports in accordance with DI-MISC-82386 and a Certificate of Compliance per DI-MISC-81356A with each shipment. The work is tied to a Small Business Set Aside under NAICS code 541380, indicating it is reserved for small business concerns, and is structured as a subcontract under the Department of Defense, managed by DLA Maritime in Portsmouth. Performance of the work is designated for Kittery, Maine, with a zip code of 03904. The solicitation was posted on July 28, 2026, and responses are due by August 6, 2026, at 2:00 PM Eastern Time. All deliverables must meet the specified technical standards and accompany shipments as required documentation.

Testing Laboratories and Services

POSTED

DEADLINE

Manufacture of Virgin Powdered Metal (Copper-Nickel Alloy)The contract requires the production of 600 kilograms of virgin Osprey Cu30Ni metal powder with a particle size distribution of -45 +15 micrometers, fully compliant with MIL-PRF-32814 specifications. Strict quality control measures are mandated to ensure precise particle size consistency and high chemical purity, critical for performance in high-reliability defense applications. The material must be manufactured using virgin feedstock and meet all technical benchmarks outlined in the military performance specification without compromise. This is a small business set-aside subcontract under NAICS code 331318, issued by DLA Maritime - Portsmouth under the Department of Defense, with responses due by August 6, 2026. The work must be performed at a facility located in Kittery, 03904, and is restricted to eligible small businesses as defined by the Small Business Administration. The solicitation is open for bidding with a submission deadline in the specified timeframe, and participation is limited to businesses qualifying for the total small business set-aside. The contract emphasizes adherence to stringent military standards and is focused on securing a critical material supply chain for defense systems.

Other Aluminum Rolling, Drawing, and Extruding

POSTED

DEADLINE

POWDERED METALThe contract solicitation SPMYM326Q4071, issued by DLA Maritime – Portsmouth under the Department of Defense, seeks powdered metal in accordance with a mandatory brand-name requirement and MIL-PRF-32814 specifications, specifically OSPREY CU30NI METAL POWDER -45 +15 UM, Part Number 30000408, with a required quantity of 60 cartons (each 10kg), and must be virgin material with no blends permitted. This is a Small Business Set Aside, classified under NAICS code 331110, with responses due by August 6, 2026 at 10:00 AM EST, and delivery is targeted for August 30, 2026 at the Portsmouth Naval Shipyard in Kittery, Maine. Performance and delivery must adhere to strict packaging and marking standards outlined in ASTM D-3951 and MIL-STD-129, including prohibited materials such as asbestos, excelsior, and loose fill polystyrene, with PVT samples requiring explicit labeling. The contract mandates submission of a Certificate of Compliance per DI-MISC-81356A and a Chemical Certification Report per DI-MISC-82386 with each shipment, and inspections are to be performed at destination by the government using official forms such as DD Form 250 or WAWF. All offerors must be registered in SAM.gov and provide their Unique Entity Identifier and CAGE code, and must self-certify as a small business under the SBA’s size standards. The contract incorporates numerous FAR and DFARS clauses including prohibitions on covered telecommunications equipment, counterfeit parts, materials from Xinjiang, and hexavalent chromium, and requires compliance with NIST SP 800-171 for safeguarding controlled unclassified information. Invoicing must be submitted electronically via WAWF, with payment administered by DFAS Columbus, and the contract includes clauses regarding disputes resolution, supplier performance risk reporting, and payment for data. The award basis is not explicitly defined but may follow a Low-Price Technically Acceptable (LPTA) or trade-off method, and an evaluation factor exists for unused former government surplus property and coordination with Engineering Support Activities. Additional contractual requirements include adherence to local DLA clauses covering shipment marking, consignment instructions, threaded products, and prohibited packing materials, with full technical specifications

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

DEADLINE

Hose Assembly SOCThe contract titled Hose Assembly SOC is a combined solicitation issued by DLA Maritime - Portsmouth under the Department of Defense, with solicitation number SPMYM32Q4070 and a posting date of July 28, 2026. It is designated as a Total Small Business Set-Aside under FAR 19.5, meaning only small businesses are eligible to compete, and the North American Industry Classification System code is 332912, indicating the scope involves other fabricated metal product manufacturing. Responses are due by August 17, 2026, at 4:00 AM, and all requirement details, instructions, and specifications must be obtained from the solicitation and its associated documents. The primary point of contact for inquiries is Gary Chandler, reachable via email at gary.d.chandler.civ@us.navy.mil, with a secondary contact at DLA-KME-QUOTATIONS@DLA.MIL. The contract’s administrative office is located in Portsmouth, New Hampshire, while the place of performance is situated in Kittery, Maine, with a ZIP code of 03904.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

EnginesThis contract, identified by solicitation number SPMYM326Q4065, is a Small Business Set Aside issued by DLA Maritime – Portsmouth under NAICS code 335312 for engines, with responses due by August 5, 2026. The requirement centers on the procurement of engines compliant with stringent federal supply chain security standards, particularly Section 889 of the NDAA, which prohibits the use of telecommunications and video surveillance equipment from designated foreign adversaries such as Huawei and ZTE. Contractors must verify supply chain traceability, report any covered equipment within one business day, submit mitigation plans within ten days, and ensure compliance flows down to all subcontractor tiers with documentation retained for six years. The contract applies strict packaging and marking requirements aligned with ASTM-D-3951 and MIL-STD-129, mandating specific labeling including NSN, QA Designator 4, government contract number, and full ship-to and from details with Data Matrix barcodes; prohibited materials include asbestos, loose fill polystyrene, and yellow packaging except for radioactive containment. Delivery is targeted for August 30, 2026, at the Portsmouth Naval Shipyard in Kittery, Maine, under FOB Destination terms, with acceptance performed by the government at the destination using official forms such as DD Form 250 or WAWF. The source selection method is Lowest Price Technically Acceptable, with an evaluation factor of $200 for unused surplus property and $600 per Engineering Support Activity for coordination efforts. All offers must include a current UEI and CAGE code, affirm small business status under the SBA size standard, and complete required representations concerning covered telecommunications equipment, employee identity verification, and compliance with export control and cybersecurity regulations including NIST SP 800-171 and DFARS 252.204-7012. Invoicing must be conducted via WAWF, and contractors are subject to Supplier Performance Risk System assessments. Special requirements include strict adherence to anti-counterfeit part systems, prohibition of forced labor from Xinjiang, restrictions on compensation for former DoD officials, and compliance with cybersecurity controls for safeguarding covered defense information. No pricing details are provided in the solicitation, and the contract value remains unspecified.

Motor and Generator Manufacturing

POSTED

DEADLINE

BALL, SCREW ASSEMBLYThis solicitation, identified as SPMYM326Q8023, is a combined synopsis and solicitation for commercial items issued under FAR Part 12 and Simplified Acquisition Procedures, with no paper copies available and all information posted exclusively on SAM.gov. The requirement is for two Ball, Screw Assemblies, specifically OEM part number B15125C Rev-D manufactured by Beaver Aerospace & Defense Inc., furnished as a fully machined and assembled unit in compliance with proprietary technical data. This is a sole-source procurement due to the proprietary nature of the drawing and OEM status, and quotations from any other manufacturer will be rejected outright. Offerors must be registered and active in SAM.gov, possess a valid CAGE code, and submit complete responses via email to sam.j.aiguier.civ@us.navy.mil and DLA-KME-QUOTATIONS@DLA.MIL by the deadline of July 28, 2026, at 12:00 PM EST. Evaluation will be conducted using the Lowest Price Technically Acceptable method, with technical acceptability determined by strict adherence to specifications, including the requirement for quality certifications, test results, and supply chain traceability documentation. Responsibility screening will be conducted through PPIRS and FAR 9.104 criteria. All respondents must complete and include with their offer the signed Security Agreement for Protection of Naval Nuclear Propulsion Information and DD Form 2345 to obtain proprietary drawings. Proposals must include pricing, FOB Destination terms, business size under NAICS 332991, and payment preference between Government Commercial Purchase Card (GCPC) or Wide Area Workflow (WAWF). If GCPC is selected, a receiving report must be submitted via WAWF. Offerors not the original manufacturer must disclose the manufacturer’s name, location, and business size. The contract incorporates a comprehensive array of FAR, DFARS, DLAD, and local clauses related to cybersecurity (including NIST SP 800-171 and DFARS 252.204-7012), prohibitions on covered telecommunications equipment, trafficking in persons, labor standards, environmental controls, Buy American restrictions, and export control requirements. Items must be delivered to Kittery, Maine, by September 28, 2026, with inspection and acceptance occurring at destination per QA-4 terms and constructive acceptance extended to 45 calendar days. Packaging must conform to

Ball and Roller Bearing Manufacturing

POSTED

DEADLINE

Receptacle Connector **Amendment 0001**This solicitation, identified as SPMYM326Q1139, is a combined synopsis and solicitation for commercial items under FAR Part 12 and Simplified Acquisition Procedures, seeking a Receptacle Connector specified as SPECIAL CONNECTOR ASSY, PN M24231/13-003 SYMBOL 737.9 (MOD SYMBOL 1324) WITH PLASMA COATING, featuring a 7 PIN INSERT and HALF MOON, NO CABLE configuration. The contract requires plasma coating compliant with NAVSEA’s PRO-30 MANUAL (REV 03), with approved alternatives including Texas Research Institute’s TRI Formula 209 and DG’O/Teledyne’s DGO-1. Offerors must demonstrate technical acceptability by submitting descriptive literature that confirms compliance with all specifications; failure to do so will render the quotation technically unacceptable. The procurement is for one unit under CLIN 0001, with additional quantities under CLINs 0002 and 0003, all to be delivered to the Portsmouth Naval Shipyard in Kittery, Maine, with a required delivery date of September 25, 2026. Payment terms are net 30 days after acceptance, with preference indicated for either Government Commercial Purchase Card or Wide Area Workflow, though WAWF is mandatory for receiving reports regardless of payment method, and third-party payment systems such as Zelle, Venmo, or PayPal are prohibited. All offerors must be currently registered and active in the System for Award Management (SAM) and must complete and submit DFARS provisions 252.204-7016 and 252.204-7019 with their quotation. Access to technical drawings requires submission of a signed NNPI Security Agreement and a completed DD Form 2345 to the designated Point of Contact, Shawn Trout. Offerors not acting as the manufacturer are required to disclose the manufacturer's name, location, and business size. The evaluation methodology is Lowest Price Technically Acceptable, with responsibility determined via PPIRS under FAR 9.104. The solicitation is open to full and open competition under NAICS code 335313, with no set-aside, and includes compliance obligations such as Buy American, prohibitions on procurement from Xinjiang, restrictions on covered telecommunications equipment, trafficking in persons, ozone-depleting substances, and hazardous

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

Supply Chain Compliance & Cybersecurity Reporting SupportThe contract requires ongoing support for maintaining compliance with NIST SP 800-171 standards and fulfilling reporting obligations under DFARS 252.204-7012, including accurate tracking of FASCSA-covered articles and timely cyber incident reporting. The work centers on ensuring that all cybersecurity controls are properly implemented and documented to meet Department of Defense supply chain requirements, with a focus on safeguarding controlled unclassified information within the contractor’s systems. The scope demands continuous monitoring, analysis, and reporting to maintain compliance and respond effectively to potential cyber threats. This subcontract is issued under NAICS code 541611 and is managed by DLA Maritime - Portsmouth, a branch of the Department of Defense. The opportunity was posted on July 27, 2026, with a response deadline of August 7, 2026. There is no specified set-aside classification or place of performance details, and no point of contact information is provided. The work must be performed to meet federal defense contractual obligations, and the successful proposer will be responsible for sustaining a robust cybersecurity posture aligned with federal regulatory frameworks without explicit geographic restrictions.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Manufacture of Specialized Electrical Connectors (Plasma-Coated, 7-Pin Receptacle)The contract calls for the manufacture and delivery of precision military-grade electrical connectors designated as P/N M24231/13-003, engineered to meet NAVSEA PRO-30 standards with a plasma coating applied for enhanced durability and environmental resistance. Each connector features a half-moon design and a 7-pin insert configuration, and is specified without an attached cable to ensure compatibility with field-specific cable assembly requirements. Production must comply strictly with military specification tolerances and quality controls to support critical defense systems, with all units subject to rigorous inspection protocols prior to delivery. The opportunity is issued as a subcontract under the Department of Defense, managed by DLA Maritime - Portsmouth, and targets manufacturers with proven expertise in defense-grade electrical components. The solicitation was posted on July 27, 2026, with a firm response deadline of August 7, 2026, at 5:00 PM. The NAICS code 335931 identifies the industrial category as other electrical equipment and component manufacturing, emphasizing the specialized nature of the work. Performance is expected to occur at the contractor’s facility, with no designated geographic restriction listed, and all bids must demonstrate full compliance with the technical, material, and certification requirements outlined in the procurement.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE