Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Elevator Calibration and Safety Certification Services

Active

State & Local

Response Deadline08/20/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires precision calibration, load testing, and safety validation of elevator systems to ensure compliance with ASME A17.1 standards, with all procedures supported by NIST-traceable documentation and certification labeling. Work must be executed with rigorous technical accuracy to guarantee the operational safety and regulatory conformity of elevator installations under the jurisdiction of the California Department of Corrections & Rehabilitation. All deliverables must include verifiable, auditable records that link test results directly to national measurement standards. Subcontractors must submit proposals by August 20, 2026, and the work is classified under NAICS code 541380 for other scientific and technical consulting services. The contract is open to qualified vendors responding to a solicitation issued by the state of California, with performance expected to occur within facilities managed by the California Department of Corrections & Rehabilitation. No specific location or point of contact is provided, and there is no setaside designation, meaning all eligible entities may compete. Successful bidders will be responsible for maintaining full compliance with state and national elevator safety codes throughout the scope of service.

General Info

Precision calibration, load testing, and safety validation of elevators per ASME A17.1 with NIST-traceable documentation for California Department of Corrections & Rehabilitation.

Agency

California Department of Corrections & RehabilitationView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

CA, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineAug 20

Submission deadline

Response Deadline

08/20/2026, 07:00:00 PM UTCin 20 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyCalifornia Department of Corrections & Rehabilitation

ContactsNo contacts available

OfficeN/A

Organization / Agency

California Department of Corrections & Rehabilitation

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Precision calibration, load testing, and safety validation of elevator systems with NIST-traceable documentation and certification labeling per ASME A17.1.

Similar Contracts

Same NAICS industry code

Product Verification Testing (PVT) SupportThe contract supports government-conducted Product Verification Testing by providing comprehensive assistance in sample preparation, documentation, and coordination with Defense Logistics Agency testing laboratories, as specified in Section E05. This subcontract is focused on ensuring that all testing procedures align with federal standards and that logistical and administrative tasks are executed accurately to facilitate timely and reliable verification outcomes. The work involves close collaboration with DLA labs to meet technical requirements and maintain traceability throughout the testing lifecycle. The solicitation is posted under NAICS code 541380 and is managed by the Land Supply Chain within the Department of Defense. The opportunity is open for responses until August 31, 2026, with no specific set-aside categories or organization type restrictions indicated. Performance locations are not explicitly defined, but the work centers around DLA testing facilities and requires active coordination with government personnel. Interested parties can access further details through the official DIBBS portal linked in the contract data.

LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in about 1 month

Product Verification Testing CoordinationThe contract requires the preparation, marking, and shipment of Product Verification Test (PVT) samples in full compliance with Department of Defense standards, including proper segregation of materials and complete documentation to ensure traceability and regulatory adherence. All activities must be conducted under strict guidelines to meet the DoD’s quality and procedural requirements for verification testing. The effort is classified as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the Small Business Administration, and falls under the NAICS code 541380 for other scientific and technical consulting services. The solicitation was posted on July 31, 2026, with a response deadline of August 20, 2026, and is managed by the ASC Commodities Division within the Department of Defense. Performance will occur at an unspecified location, and the award is expected to follow competitive procedures under the Federal Acquisition Regulation.

ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Rafferty Main Dam, Gardiner Dam, and Grant Devine Dam Geotechnical Health Monitoring Upgrades

Solicitation # 2026-27-0045

The Water Security Agency is seeking to upgrade the geotechnical health monitoring systems at Rafferty Dam, Gardiner Dam, and Grant Devine Dam to ensure the continued safety and performance of these critical infrastructure assets. The work involves evaluating the existing instrumentation network, decommissioning non-functional sensors, replacing faulty or outdated equipment, and addressing instruments that are producing inaccurate or alarming data. The goal is to restore reliable, real-time monitoring capabilities that support ongoing assessments of dam integrity, enabling proactive management of geotechnical risks and informing future operational and maintenance decisions. All improvements will align with the agency’s mandate to safeguard public safety and infrastructure under its stewardship. The solicitation, identified as 2026-27-0045, was posted on July 30, 2026, with responses due by August 18, 2026. It is open to qualified contractors and falls under the jurisdiction of the Water Security Agency, a Saskatchewan Crown corporation vested with responsibility for water resource management across the province. All work must be performed within Saskatchewan, and inquiries should be directed to Enrique Aldana, P.Eng., the primary point of contact, via tendersubmissions@wsask.ca. The project reflects WSA’s broader commitment to maintaining the long-term reliability of its dam systems and ensuring compliance with provincial safety and environmental standards.

Water Security Agency

POSTED

about 24 hours ago

DEADLINE

Testing and Certification ServicesThe contract solicits independent laboratory testing services to ensure compliance with FCC, NEMA, and IEC 61000-4-5 standards for product validation and bid submission purposes. The work is intended to support technical due diligence and regulatory readiness, likely in alignment with transportation infrastructure projects under the Texas Department of Transportation. Testing must be conducted by qualified third-party labs capable of delivering accurate, accredited results that meet U.S. and international electromagnetic compatibility and safety requirements. The opportunity is structured as a subcontract with a response deadline of August 13, 2026, and falls under NAICS code 541380 for other scientific and technical consulting services. The solicitation was posted on July 30, 2026, and while the office address and point of contact are not provided, the place of performance is expected to be tied to the testing facility’s location, with no geographic restriction specified beyond the awarding agency’s Texas jurisdiction.

Texas Department Of Transportation

POSTED

DEADLINE

RFP #2027-05-VPA Industrial Hygiene Monitoring

Solicitation # RFP-125373

The Virginia Port Authority is soliciting proposals for a full-service industrial hygiene contractor to provide on-call monitoring, assessment, reporting, and hazard mitigation services across the Hampton Roads, Virginia area. The selected firm must be capable of delivering comprehensive industrial hygiene support, including the development and implementation of effective abatement strategies to address workplace hazards in real time. Services are expected to be responsive and available as needed to ensure ongoing compliance and safety across VPA operations. Proposals must be submitted by August 20, 2026, at 7:00 PM EST, with the request for proposal issued on July 30, 2026. The contract is open to all eligible vendors without specific set-aside designations, and interested parties should direct inquiries to Erin Griggs at the Virginia Port Authority via email at egriggs@portofvirginia.com or phone at 757-440-2890. All services are to be performed at locations within the Hampton Roads region, and vendors are encouraged to review the full solicitation details online through the provided portal prior to submission.

Virginia Port Authority

POSTED

DEADLINE

Shelf-Life Compliance and Technical Documentation ManagementThe contract requires strict adherence to Defense Logistics Agency’s RS001 shelf-life requirements, mandating that all items comply with Type I standards, which specify a fixed 24-month shelf life with no possibility of extension. This necessitates rigorous tracking, labeling, and handling procedures to ensure items remain within their certified lifespan and are not used past their expiration date. Simultaneously, the contractor must manage all technical documentation in accordance with DLA’s RA001 guidelines, including the use of R/I-numbered specifications to maintain accurate, traceable records throughout the product lifecycle. Documentation must be complete, current, and accessible to support audits and compliance verification. Performance is centered at Edwards Air Force Base with a zip code of 93524-8600, and the work falls under the NAICS code 541380, indicating specialized technical services. The contract is structured as a subcontract with no set-aside designation, meaning it is open to all qualified offerors without restrictions based on business size or type. Responses are due by August 10, 2026, following a posting date of July 30, 2026, allowing a two-week window for submission. All deliverables must align with DLA’s stringent standards to ensure readiness and regulatory compliance across the defense supply chain.

Defense Logistics Agency

POSTED

DEADLINE

Quality Assurance and Inspection ServicesThe contract seeks third-party inspection and quality assurance services to ensure compliance with MIL-STD-1916 and ASQ H1331 standards, as well as MIL-STD-105 and ASQ Z1.4, focusing on systematic sampling procedures and accurate defect classification to verify product quality. These services are critical for validating that manufactured goods meet rigorous military and industry quality benchmarks, with emphasis on statistical sampling methods and consistent defect categorization to support reliable acceptance decisions. The contract is classified as a subcontract under NAICS code 541380 and is issued by the Strategic Acq Program Directorate within the Department of Defense. It was posted on July 30, 2026, with a response deadline of August 4, 2026, indicating a narrow window for proposals. The place of performance and point of contact details are unspecified, and no set-aside type is designated, meaning the opportunity is open to all eligible contractors. All submissions must be made through the provided DIBBS portal link to be considered.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

PRODUCTION LOT TESTING

Solicitation # SPE7L1-26-Q-1407

This contract pertains to the production lot testing of an item identified by NSN 0001S00000062 with a quantity of 186 units, solicited under SPE7L1-26-Q-1407 with a response deadline of August 14, 2026, and a delivery requirement of 178 days after award. The technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA requirements, and the contractor must hold a Cybersecurity Maturity Model Certification (CMMC) Level 2 certification from an accredited third-party assessment organization. The item involves covered defense information subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S., and mandating compliance with DFARS 252.225-7048. Access to the technical data is restricted to contractors approved by DLA who have completed mandatory training, submitted the required questionnaire, and hold a valid US/Canada Joint Certification Program certification. The performance location is New Cumberland, Pennsylvania, and the point of contact is Matthew Lepak of the Department of Defense’s Land Supply Chain.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Tool and Equipment Calibration ServicesThe City of Dallas is seeking qualified service providers to perform periodic calibration of precision tools, torque wrenches, test equipment, and measuring instruments used in aviation maintenance operations. All calibration services must include traceable documentation to ensure compliance with industry standards and regulatory requirements for accuracy and reliability in critical maintenance tasks. This subcontract opportunity is open for response until August 4, 2026, with the solicitation posted on July 30, 2026, and falls under the NAICS code 541380 for scientific and technical consulting services. The work is anticipated to support aviation maintenance activities within the jurisdiction of the City of Dallas, though specific performance location details are not provided. Interested parties must submit their proposals before the deadline to be considered for award.

POSTED

DEADLINE

Magnetic Particle Testing (MT) ServicesThe contract requires the performance of magnetic particle testing on ferromagnetic materials to identify surface and near-surface discontinuities in welds and base metals at Brookhaven National Laboratory in Upton, New York, with a zip code of 11973. This work falls under NAICS code 541380, indicating it is related to other scientific and technical consulting services, and is structured as a subcontract. The solicitation was posted on July 30, 2026, and responses must be submitted by August 21, 2026, by 9:00 PM. The performing organization will be working under the oversight of the Department of Energy as the primary agency and Brookhaven National Laboratory as the DOE contractor responsible for managing the task. The place of performance is specifically located in Upton, and no point of contact details are provided in the data.

Brookhaven National Labor -Doe Contractor

POSTED

DEADLINE

Visual Weld Inspection (VT) ServicesThe contract requires the performance of visual weld inspection services at Brookhaven National Laboratory in Upton, New York, to evaluate the surface quality, alignment, and code compliance of welds both prior to and following non-destructive testing. This subcontract falls under NAICS code 541380 and is issued by the Department of Energy through its contractor at Brookhaven National Lab, with a response deadline of August 21, 2026. The work must adhere to established industry standards and regulatory requirements, and inspections will serve as a critical step in ensuring structural integrity and safety before and after more advanced testing procedures. All services are to be conducted on-site at the Upton location, with no indication of alternative performance locations or remote work options.

Brookhaven National Labor -Doe Contractor

POSTED

DEADLINE

Shear Wave Ultrasonic Testing (UT) ServicesThe contract entails performing shear wave ultrasonic testing on weld joints within piping systems at Brookhaven National Laboratory located in Upton, New York, with the objective of identifying internal flaws that could compromise structural integrity. This non-destructive evaluation method is critical for ensuring the safety and reliability of piping infrastructure, particularly in high-risk environments such as those managed by the Department of Energy. The work is classified under NAICS code 541380 and structured as a subcontract, targeting qualified service providers with specialized expertise in advanced ultrasonic inspection techniques. The solicitation was posted on July 30, 2026, with a mandatory response deadline of August 21, 2026, at 9:00 PM Eastern Time. All testing must be conducted on-site at the Upton facility, and contractors are expected to adhere to stringent quality control and safety protocols consistent with federal energy laboratory standards. Although no specific set-aside provisions or point of contact details are provided, the performance location and agency affiliation with the Department of Energy indicate the project’s alignment with national laboratory operations and regulatory compliance requirements.

Brookhaven National Labor -Doe Contractor

POSTED

DEADLINE

More opportunities from California Department of Corrections & Rehabilitation

Same awarding agency

GenAI Use Disclosure and Compliance ConsultingThe contract requires expert consultation to advise on and document the use of generative artificial intelligence in deliverables that affect system functionality, risk, or performance, ensuring full compliance with SAM 4986.2 requirements. This includes identifying where GenAI tools are applied, assessing their impacts on operational integrity and safety, and maintaining rigorous records to demonstrate adherence to regulatory standards. The work is scoped to support accountability and transparency in AI-driven outputs within critical systems under the oversight of the California Department of Corrections & Rehabilitation. The opportunity is issued as a subcontract under NAICS code 541611, with a posted date of July 27, 2026, and a response deadline of August 10, 2026. It is administered by the state of California without a specified set-aside designation or location details, indicating flexibility in performance but requiring strict alignment with state-mandated compliance protocols. Contractors must be prepared to deliver precise documentation methodologies and risk assessments tailored to the department’s operational environment, with no point of contact provided, suggesting all inquiries should be directed through the public procurement portal linked in the posting.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Small Business and DVBE Compliance and Reporting ServicesThe contract seeks services to provide administrative support ensuring compliance with subcontracting requirements for Disabled Veteran Business Enterprises, Small Businesses, and Microbusinesses within the California Department of Corrections and Rehabilitation. The work involves tracking certifications, preparing and submitting all necessary documentation, and maintaining accurate records to meet state and federal reporting obligations. This support is critical to affirming that subcontracting goals are met and that certified businesses are properly recognized and included in procurement activities. The solicitation is open for responses until August 10, 2026, and is classified under NAICS code 541611, indicating management consulting services focused on administrative support. The contract is tied to the California state agency and requires performance within the state, though specific location details are not provided. All work must align with California’s subcontracting compliance policies, emphasizing accurate documentation, timely submissions, and proactive monitoring of business certifications to ensure adherence to program mandates.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Cloud Software Licensing Administration and ComplianceThe contract encompasses the administration, deployment, and ongoing compliance management of Microsoft 365 A5 Unified Education licenses for a large educational population comprising 1,148 staff members and 45,920 students, all covered under a Campus Agreement or Enterprise Edition Subscription enrollment. This includes ensuring proper allocation, activation, and renewal of licenses across the entire user base, maintaining adherence to Microsoft’s licensing terms, and conducting regular audits to confirm compliance and avoid financial or legal exposure. The scope extends to managing user access, coordinating with internal stakeholders for onboarding and offboarding, and providing reporting capabilities to demonstrate licensure accuracy and usage patterns. The solicitation is issued as a subcontract under NAICS code 518210, with a posted date of July 27, 2026, and a response deadline of August 10, 2026. Though the agency listed is the California Department of Corrections & Rehabilitation, the nature of the requirement suggests a broader educational context, indicating the contract may be part of a statewide initiative or interagency collaboration. The place of performance and point of contact details are not provided, and the procurement is being managed through the California eProcurement portal, with all relevant information accessible via the provided UI link. The contract does not specify a set-aside classification, leaving it open to eligible subcontractors without preference based on business size or ownership.

Computing Infrastructure Providers, Data Processing, Web Hosting, and Related Services

POSTED

DEADLINE

RFQ 10841038 - 1 - MELA and Defender Education Solutions

Solicitation # 10841038-1

The California Department of Corrections and Rehabilitation is seeking a Software as a Service solution for M365 A5 Unified Education and Defender Endpoint Server Education Licenses through Campus Agreements and the Enrollment for Education Solutions program. The request, issued under solicitation number 10841038-1, requires vendors to submit a quote by the deadline of August 10, 2026, and by doing so, they agree to abide by all terms and conditions outlined in the request. The procurement is intended for educational licensing purposes and is specifically targeted at providing enterprise-grade security and productivity tools to support the agency’s educational initiatives. This solicitation is classified under the state and local government category and is managed by the California agency, with Robin Adams serving as the primary point of contact for inquiries. The contract will be implemented across California, with no specific city or zip code designated for performance, indicating broader statewide applicability. The vendor must provide the software licenses under the established education pricing frameworks and ensure seamless integration and support for the designated endpoints and services. All responses must align with the agency’s requirements for scalability, compliance, and ongoing service delivery through the approved education licensing channels.

Computing Infrastructure Providers, Data Processing, Web Hosting, and Related Services

POSTED

DEADLINE

Elevator Equipment Delivery and Installation SupportThe contract involves the transport, handling, rigging, and staging of elevator components including control panels and hoistway equipment at correctional facilities operated by the California Department of Corrections & Rehabilitation. Services require specialized logistics and on-site support to safely move and position heavy machinery within secure prison environments, ensuring compliance with institutional safety and operational protocols. Work must be performed at various state prison locations across California, with no specific city or zip code designated in the posting. This subcontract opportunity is open for bids through the Cal eProcure system, with a response deadline of August 20, 2026, and was posted on July 27, 2026. The North American Industry Classification System code 484220 applies, indicating it falls under truck transportation for specialized freight. The contract does not specify a set-aside classification or organizational eligibility restrictions, and there is no listed point of contact for inquiries, requiring potential bidders to navigate the online portal for further details.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Elevator Parts Supply and ReplacementThe contract involves the supply of new or equivalent-quality elevator components essential for maintenance and replacement, including control systems, cables, doors, and safety devices, ensuring compliance with operational and safety standards. Documentation confirming NIST-traceable calibration is required for applicable parts to guarantee precision and regulatory adherence. This subcontract is issued by the California Department of Corrections & Rehabilitation under NAICS code 423830, targeting suppliers capable of delivering certified, reliable elevator parts. The solicitation was posted on July 27, 2026, with responses due by August 20, 2026, and performance is expected within California facilities under the agency's jurisdiction.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Emergency Elevator Repair ServicesThe contract is for emergency elevator repair services to ensure 24/7 response to elevator breakdowns, entrapments, and urgent mechanical failures across facilities under the California Department of Corrections & Rehabilitation. Services include immediate diagnostics, part replacement, and full system restoration to restore elevator functionality with minimal downtime, prioritizing safety and operational continuity. The work must be performed promptly at any time, day or night, to address life-safety issues and maintain compliance with state regulations for correctional facility infrastructure. This is a subcontract opportunity posted on July 27, 2026, with a response deadline of August 20, 2026. The NAICS code 811310 classifies the services under Other Electronic and Precision Equipment Repair and Maintenance. The place of performance spans multiple locations under the California Department of Corrections & Rehabilitation, though specific sites are not detailed. The contract is not set aside for any specific small business category, and interested parties must submit proposals through the CalEProcure portal by the stated deadline to be considered for award.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Preventive Elevator Maintenance ServicesThe contract titled Preventive Elevator Maintenance Services obligates the contractor to perform scheduled monthly, quarterly, and annual inspections, lubrication, adjustments, and safety checks on elevators located at California Department of Corrections & Rehabilitation facilities. All services must be carried out in strict accordance with the detailed requirements outlined in Exhibit A-1, which mandates comprehensive service logging to ensure full traceability and compliance. The work is critical to maintaining the safe and reliable operation of elevator systems across CDCR operations, requiring adherence to established protocols and documentation standards. The contract is classified as a subcontract under NAICS code 811310 and was posted on July 27, 2026, with a response deadline of August 20, 2026. It is managed by the California Department of Corrections & Rehabilitation under the state of California, with performance required at various CDCR facilities across the state. The solicitation does not specify a set-aside type or point of contact, and all service activities must align with state operational and safety mandates without reliance on external documentation referencing files or exhibits beyond what is embedded in the contract’s requirements.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

C5613295-D, Rebid 2 - Elevator Maintenance, Inspection, and Repair Services

Solicitation # C5613295-D, Rebid 2

The Contractor is obligated to provide comprehensive elevator maintenance, inspection, and repair services for the California Department of Corrections and Rehabilitation at Salinas Valley State Prison located in Soledad, California. All services must be performed in strict accordance with the rates outlined in Exhibit B-1, the Rate Sheet, which encompasses every necessary component of the work including labor, travel expenses, per diem, materials, both consumable and nonconsumable supplies, transportation, tools, equipment, permits, licenses, and insurance. The Contractor is responsible for all costs associated with fulfilling the scope of work without additional reimbursement. The contract is part of a rebid process under solicitation number 0000039889, with responses due by August 20, 2026, and was posted on July 27, 2026. The primary point of contact for inquiries is Elizabeth Fisher, reachable via email at elizabeth.fisher@cdcr.ca.gov. The services are critical to ensuring the safe and reliable operation of elevators within the prison facility and are governed under the authority of the California state agency.

POSTED

DEADLINE

Generative AI (GenAI) Reporting and ComplianceThe contract requires comprehensive documentation and reporting on the use of Generative AI in proposal preparation and operational activities, with a specific mandate to submit OBS 1000 forms and AI factsheets to ensure transparency and compliance. All submissions must accurately detail how Generative AI tools were employed, including their scope, impact, and adherence to established guidelines, to support accountability in state-funded procurement processes. This subcontract, issued by the California Department of Corrections & Rehabilitation under NAICS code 541512, is open for response through August 15, 2026, and applies to entities engaged in providing professional, scientific, or technical services related to proposal development. The requirement is part of broader efforts to monitor and regulate AI usage in state contracting, ensuring that automated tools are used responsibly and consistently across all phases of proposal creation and operational execution.

Computer Systems Design Services

POSTED

DEADLINE

Background Check and Personnel Clearance AdministrationThe contract requires administration of background checks and institutional access clearance for contractor and subcontractor personnel who need entry into California Department of Corrections & Rehabilitation facilities. This includes verifying identities, conducting thorough screenings, and ensuring compliance with all security protocols to maintain the integrity and safety of CDCR operations. The work involves coordinating with multiple entities to process, validate, and manage clearance statuses efficiently across a statewide network of correctional facilities. The solicitation is classified as a subcontract with a NAICS code of 541611 indicating investigative and security services, and it was posted on July 27, 2026, with a response deadline of August 15, 2026. The contract is administered by the California Department of Corrections & Rehabilitation under the state’s procurement system, with performance expected across all CDCR facilities in California. No specific set-aside designations or point of contact details are provided, and interested parties must submit proposals through the specified state procurement portal.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Small Business and DVBE Subcontracting CoordinationThe contract requires the provision of certified DVBE, Small Business, or Micro Business subcontracting services to assist the prime contractor in meeting state-mandated participation targets and to qualify for a 5% price adjustment incentive. The services focus on coordinating and managing subcontracts with eligible disadvantaged and small business entities to ensure compliance with California’s procurement goals, particularly under the NAICS code 541211 for accounting, auditing, and bookkeeping services. The prime contractor must demonstrate meaningful engagement with certified firms to fulfill the requirements tied to the incentive. This subcontracting coordination effort is under the California Department of Corrections & Rehabilitation and is open for response until August 15, 2026. The solicitation does not specify a set-aside type, meaning the award is not restricted to a particular category beyond the subcontracting participation requirements. Performance location and primary contact details are not provided, but all activities must align with state compliance standards for small business andDVBE inclusion. Entities seeking to participate must be certified and capable of delivering professional services that support the prime’s contractual obligations while contributing to broader economic development goals within California.

Offices of Certified Public Accountants

POSTED

DEADLINE