This Government Contract opportunity from Iowa was posted on June 19, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Elevator Equipment Supply and Replacement

Closed

State & Local

Submission Closed07/09/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333922

New

Federal

HDPE Piping and Geothermal Components SupplierThis subcontract opportunity is for the procurement and delivery of high-density polyethylene piping, geothermal-grade fittings, and specialized loop components for Department of Veterans Affairs facility projects. The selected supplier will provide materials that meet all federal and VA specifications, delivering them directly to the project site located in Carrollton, Georgia. Managed by the 247-NETWORK Contract Office 7, this requirement is designated as a sole source set-aside for Service-Disabled Veteran-Owned Small Businesses under FAR 19.14. The solicitation was posted on October 1, 2026, with a response deadline of October 16, 2026.

247-NETWORK Contract Office 7 (36C247)

POSTED

DEADLINE

Asphalt Windrow Elevator Manufacturer/SupplierThis subcontract agreement involves the design, fabrication, and delivery of a complete Asphalt Windrow Elevator system intended for prime contractors working on Texas Department of Transportation equipment procurements. The scope of work encompasses the entire manufacturing process, including the production of mechanical assemblies, conveyor components, and structural frames. To ensure durability and compliance, all equipment must be constructed using industrial-grade steel and asphalt-resistant coatings while adhering strictly to TxDOT procurement standards and industrial safety specifications. The project is categorized under NAICS code 333922 and is managed through the Texas Department of Transportation. Interested parties must note that the response deadline for this opportunity is October 30, 2026. The ultimate objective of the contract is the delivery of a fully functional elevator system that meets all specified technical and regulatory requirements.

Texas Department of Transportation

POSTED

DEADLINE

Asphalt Windrow Elevator

Solicitation # 601440000053907

The Texas Department of Transportation is seeking responses for solicitation number 601440000053907 regarding an Asphalt Windrow Elevator. This SLED organization procurement falls under NAICS code 333922 and will be performed within the state of Texas. The solicitation was posted on September 30, 2026, with a response deadline of October 30, 2026, at 9:00 PM. Interested vendors must register and submit their responses through the Euna Procurement portal, formerly known as Bonfire. All submittals must be received by the specified opening date and time to be considered. Brian Jordan serves as the primary procurement contact for this action. Vendors are advised to monitor the procurement website for any addendums, additional documents, or changes to the solicitation.

Texas Department of Transportation

POSTED

DEADLINE

Stainless Steel Salt Conveyor Fabrication and AssemblyThis subcontract involves the manufacture and assembly of two towable, radial stacking salt conveyors designed for prime contractors working on Pennsylvania Department of Transportation procurement projects. The technical specifications require the fabrication of 24-inch by 70-foot frames using 304 stainless steel, the integration of radial stacking mechanisms capable of reaching heights of 35 to 40 feet, and the installation of PVC 200# crescent top belts secured with stainless steel lace. Additionally, the contractor must construct towable undercarriages utilizing 3 by 6 by 3/16 inch stainless steel tube arms. The project falls under NAICS code 333922 and requires the delivery of two fully operational units. Interested parties must adhere to the timeline established by the posting date of September 30, 2026, with a response deadline set for October 14, 2026.

Department of Transportation

POSTED

DEADLINE

2 Salt Conveyors, Towable, Radial Stacker, Self Co

Solicitation # 003775

The Pennsylvania Department of Transportation is soliciting the procurement of two new, current production model stainless steel portable salt conveyors, specifically referencing the Kimco 2470SS. Each unit must be a 24-inch by 70-foot radial stacking conveyor featuring a self-contained non-DEF diesel engine with a minimum of 74 horsepower and a hydraulic drive. Designed to fill various salt stockpile structures, the units must be compatible with a 3 cubic yard front end loader and constructed using 304 stainless steel. Key technical requirements include a 12-volt LED lighting system complying with ICC and Pennsylvania motor vehicle laws, as well as strict adherence to NHTSA rules for conspicuity tape and reflective materials. The successful bidder must deliver one unit each to PENNDOT District 10-0 in Indiana, PA, and District 12-0 in Uniontown, PA, within 90 days of the purchase order receipt under FOB Destination terms. All manuals must be provided in PDF format on a thumb drive, and required training must be completed within 60 days of delivery. Contractors are required to submit the Worker Protection and Investment Certification Form (BOP-2201) to certify compliance with Pennsylvania state labor and workforce safety laws. Failure to provide truthful certifications may result in contract termination and a three-year debarment from bidding on future contracts.

Department of Transportation

POSTED

DEADLINE

Bulk Material Handling Conveyor and Hoist SupplyThis subcontract for Bulk Material Handling Conveyor and Hoist Supply involves the supply and installation of cross conveyors, trailing trolleys, and maintenance hoists for prime contractors on industrial projects located in Sulphur, Louisiana. The scope of work includes the installation of luffing sheaves, oil-filled gearboxes with drain valves, and electric powered winches for outdoor jibs to ensure the delivery of fully operational conveyor and hoisting systems. Managed by the Port of Lake Charles in Louisiana, the project requires strict compliance with CEMA and CMAA standards. The solicitation was posted on September 29, 2026, with a response deadline set for November 6, 2026. The contract falls under NAICS code 333922.

POSTED

DEADLINE

Solicitation # CP25013

The Lake Charles Harbor and Terminal District is soliciting proposals for the procurement of one new portal mounted traveling import hopper to be installed at Bulk Terminal No. 1 in Sulphur, Louisiana. The contract includes an option for the owner to purchase an additional unit within 12 months. Proposals are due by 4:00 PM CDT on November 6, 2026, and must be submitted both electronically in PDF and Excel formats and as two bound hard copies. The selection process is based on a 125-point evaluation system, though the highest score does not guarantee a contract award. The selected contractor must provide the physical hopper, related parts, and a spare parts allocation equal to at least 5 percent of the purchase price. Key requirements include the use of in-house engineers, English language proficiency, and the ability to provide local sales support in the Southeast United States. Rigorous packaging standards are mandated to protect equipment from sea spray and ultraviolet exposure during transit, and all safety signage must comply with NFPA 70E. Financial and legal protections include a 5 percent bid deposit, a 100 percent performance bond, and a warranty bond required for the final 15 percent payment. Payment is contingent upon the submission of applications for payment, partial lien waivers, and a final certificate confirming the equipment is free of all encumbrances. The project involves a phased acceptance process, including pre-shipment certification and final verification of commercial operations by an engineer, with the owner reserving the right to use a third-party inspection agency.

POSTED

DEADLINE

39--ACTUATOR,ELECTRO-MECHA

Solicitation # SPE8EF-26-T-1847

Solicitation SPE8EF-26-T-1847 is a Request for Quotation issued by DLA Troop Support Construction and Equipment Manufacturing and Construction for the procurement of eight electro-mechanical actuators, NSN 3910017247721. The primary deliverable is part number DG-012203-04, manufactured by DRS Naval Power Systems Inc. Quotes must be submitted electronically via the DLA Internet Bid Board System by October 13, 2026. The government has specified a need ship date of March 15, 2027, with an original required delivery date of June 11, 2027, for delivery to DLA Distribution San Joaquin in Tracy, California. The contract is governed by FOB Origin terms, with inspection and acceptance occurring at the destination per FAR 52.246-1. Packaging must adhere to ASTM D3951 and RP001, while marking and labeling must comply with MIL-STD-129. Key regulatory requirements include compliance with the Berry Amendment, the Buy American Act, and DFARS 252.204-7012 for safeguarding covered defense information. Payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system. Offerors are cautioned that additive manufacturing is prohibited unless authorized and are encouraged to provide quantity ranges in their quotes.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Horizontal Shafted Screw Conveyor

Solicitation # 354-RFB-27-10

The Town of Cary is soliciting bids for the furnishing, delivery, and off-loading of a Horizontal Shafted Screw Conveyor for the South Cary Water Reclamation Facility Biosolids Dryer Building in Apex, North Carolina. The required unit must feature a 16-inch diameter, a length of approximately 46 feet 5 inches, and be constructed from 304 stainless steel for both the screw and trough. Technical specifications include a 10 HP Nord Clincher gearmotor operating at 29 RPM, an RS-2D emergency stop station with a pull cable, and flanged, hinged covers with limit switches. The contract will be awarded to the lowest responsive and responsible bidder, with a primary focus on the total price for the main product, while optional on-site startup and training pricing will be evaluated separately. Bids must be submitted electronically via the North Carolina electronic Vendor Portal by 2:00 PM ET on October 14, 2026, with all questions due by October 6, 2026. The successful supplier must deliver the equipment FOB destination between 7:00 AM and 3:00 PM ET on weekdays. Payment terms are Net 30 days upon receipt of a correct PDF invoice. The contractor is required to maintain specific insurance coverages, including Workers Compensation and Umbrella/Excess Liability of at least 1 million dollars. Additionally, the supplier must comply with all EPA, OSHA, and NCDOT regulations, as well as federal provisions regarding labor, environment, and telecommunications if federal funding is utilized.

POSTED

DEADLINE

Sources Sought Replacement of Elevating Transfer Vehicles - Ramstein Air Base, Germany

Solicitation # ETVRAMSTEIN

The United States Air Force, AFLCMC/PZIEB, is conducting a Sources Sought notice to identify qualified contractors for the design, fabrication, installation, orientation, and testing of two replacement Elevating Transfer Vehicles (ETVs) at Ramstein Air Base, Germany. The scope of work includes the removal and disposal of existing ETVs, crane rails, power feed rails, and controls, as well as the installation of new systems capable of handling 463L pallet loads. Each ETV must feature a right-angle transfer deck and turntable to interface with various powered and non-powered conveyors. The anticipated contract will be a Firm Fixed Price award with a performance period of 480 days after receipt of order. To be considered relevant, interested sources must demonstrate experience within the past five years in the design and operation of an ETV system with a minimum capacity of 10,000 pounds per unit load and a horizontal transfer speed of at least 400 feet per minute. The system must also feature automatic alignment with bin locations. Responses are due by November 9, 2026, and must include company identification, CAGE code or DUNS number, and a capabilities summary limited to 5-7 pages. The applicable NAICS code for this effort is 333923, with a business size standard of 1,250 employees.

POSTED

DEADLINE

Please be advised that sealed bids will be received by the Marshall County Board of Supervisors of Marshall County, Mississippi, in the office of the County Administrator, 1 1 1 S. Market St, Post Office Box 219, Holly Springs, Mississippi 38635, (662) 25

Solicitation # 3170036618

The Marshall County Board of Supervisors of Marshall County, Mississippi, is soliciting sealed bids for the purchase of one new 2026 Spreader - Cross Conveyor equipped with a pump and oil tank assembly. This procurement, identified by solicitation number 3170036618, requires equipment with a minimum capacity of 200 T.P.H. and specific dimensions of 103 inches in width, 43 inches in length, and 27 inches in height. Key technical requirements include a pin mount system with four pins for quick disconnect, an 18-inch belt over chain D667X capable of withstanding heat up to 350 degrees Fahrenheit, and a reversible discharge system. The unit must also feature a rotating or flip-up beam chute, a feed gate of at least 16-1/4 by 13 inches, and integrated LED lighting with a 4-wire pig tail. The required pump and oil tank assembly consists of a 35-gallon side mount tank to be installed on a tandem truck bed, complete with all necessary hoses, pumps, and brackets. Bidders must ensure the inclusion of hydraulic control valves, hoses, fittings, and quick couplers on the spreader side. Sealed bids are due by 10:00 A.M. CST on Monday, October 5, 2026. Submissions can be delivered physically to the office of the County Administrator at 111 S. Market St, Holly Springs, Mississippi, or submitted electronically via centralbidding.com. For inquiries, the point of contact is Donna Cooper.

POSTED

DEADLINE

Mohawk Medbuy Corporation - Notice of Planned Procurement - CW30580 – MMNCL CONVEYOR AND RACKING SUPPLY, INSTALLATION, AND PREVENTATIVE MAINTENANCE RFP 2026 – MMC

Solicitation # AB-2026-06411

Mohawk Medbuy Corporation has issued a Negotiated Request for Proposal, solicitation number AB-2026-06411, seeking a turnkey solution for the supply, installation, and preventative maintenance of conveyors and racking. The selected proponent will enter into a contract term spanning ten years and must demonstrate the necessary product breadth and service capabilities to meet all commitment levels required for the award. Proposals must be submitted through the Euna Procurement portal by the closing deadline of October 6, 2026, at 2:00 PM ET. The procurement process includes a Bidders Conference and requires the submission of technical responses and pricing entirely within the Euna system. This opportunity is managed by the Director of Strategic Sourcing, Marsha Van Groningen, with performance taking place in Alberta.

Mohawk Medbuy Corporation

POSTED

14 days ago

DEADLINE

in 1 day

AI Contract Overview

The contract pertains to the supply, removal, and installation of new freight and passenger elevators, encompassing all essential components such as hoistways, cabs, control systems, and machine room equipment. All work must strictly adhere to ASME A17.1 safety and performance standards, with comprehensive on-site testing required to verify compliance and operational integrity. The project involves complete replacement of existing systems, necessitating careful coordination for removal of old units and seamless integration of new ones without disrupting facility operations. This is a subcontract opportunity issued by the State of Iowa under NAICS code 333922, targeting contractors with expertise in elevator manufacturing and installation. The solicitation was posted on June 19, 2026, with responses due by July 9, 2026. All work is expected to be performed on-site, though specific location details are not provided. The contract does not include set-aside provisions, and participation is open to qualified entities responding through the designated portal.

General Info

Supply, install, and remove freight and passenger elevators per ASME A17.1 standards, on-site, Iowa subcontract.

Agency

Iowa

NAICS

333922 - Conveyor and Conveying Equipment Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of RFB944001-01.

The full solicitation package (6 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

DAS CC Historical Building Elevator Replacements PH1

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJun 19

subcontract

Response DeadlineJul 9

Deadline has passed

Submission Closed

07/09/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyIowa

ContactsNo contacts available

OfficeN/A

Organization / AgencyIowa

Office AddressN/A

ContactsNo contact information available

Full Description

Supply, removal, and installation of new freight and passenger elevators, including hoistway components, cabs, controls, and machine room equipment, with compliance to ASME A17.1 and on-site testing.