Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Elevator Modernization and Installation

Open

State & Local

Response Deadline12/18/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Elevator Modernization and Installation involves the replacement of elevator cylinders and doors at the Dimond Library for the University System of New Hampshire. The selected contractor will be responsible for removing existing components, installing new units, and completing all necessary testing and commissioning to ensure the system is fully operational and certified. All work must be performed in strict accordance with project specifications and ASME A17.1 standards. To qualify for this project, contractors must possess the required New Hampshire state elevator licensing and provide their own rigging equipment. The solicitation was posted on November 9, 2026, with a response deadline of December 18, 2026. This opportunity falls under NAICS code 238290 and is managed through the University System of New Hampshire procurement system.

General Info

Agency

University System of New Hampshire

NAICS

238290 - Other Building Equipment Contractors

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of 2120271007.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

UNH Dimond Library Elevator Upgrades

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 9

subcontract

Response DeadlineDec 18

Submission deadline

Response Deadline

12/18/2026, 05:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyUniversity System of New Hampshire

ContactsNo contacts available

OfficeN/A

Organization / AgencyUniversity System of New Hampshire

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs elevator cylinder and door replacement for prime contractors on University System of New Hampshire facility projects at the Dimond Library. Removes existing cylinders and doors, installs new units, and performs testing and commissioning per ASME A17.1 and project specifications. Requires NH state elevator licensing and rigging equipment. Delivers a fully operational, certified elevator system.

Similar Contracts

Same NAICS industry code

ACT-1033-01 NAS Perimeter Door Replacement Bldg. 300 at the William J. Hughes Technical Center, Atlantic City, NJ

Solicitation # act-1033-01-nas-perimeter-door-replacement-bldg-300-william-j-hughes-technical-center-atlantic-city

This contract, solicitation number act-1033-01-nas-perimeter-door-replacement-bldg-300-william-j-hughes-technical-center-atlantic-city, involves the provision and installation of two sets of interior commercial door assemblies at the NAS laboratory facility, Building 300, located within the WJ Hughes Technical Center at Atlantic City International Airport in New Jersey. The scope of work encompasses the replacement of existing doors as well as necessary modifications, reframing, and finishing of the existing metal stud gypsum wall board door openings. The estimated magnitude of construction for this project is between 250,000 and 500,000 dollars. Managed by PTSI Managed Services Inc., the opportunity is set aside for various small business categories, including Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. The response deadline for this solicitation is November 18, 2026.

PTSI Managed Services Inc.

POSTED

about 3 hours ago

DEADLINE

Centennial JCC Panic Hardware Services (Electrical Room Egress Doors)

Solicitation # Panic Hardware (Electrical Room Egress Doors)

Management & Training Corporation is soliciting bids for the installation of panic hardware on electrical room egress doors at the Centennial Job Corps Center in Nampa, Idaho. This fee-for-service subcontracting opportunity requires the procurement and installation of Grade I heavy-duty commercial panic bars, exterior trim, rim cylinders, strikes, and door closers. The scope of work includes conducting a site survey to verify door dimensions and fire ratings, ensuring doors swing outward and unlatch under simple pressure from the inside, and performing at least ten consecutive cycle tests to verify fail-safe operation. All work must strictly adhere to NEC 2023 Article 110.26(C)(3), NFPA 101 Life Safety Code, and the Americans with Disabilities Act. The solicitation is open to various small business classifications, including SBA certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested bidders must submit a completed bid sheet, a supplier packet containing a W-9 and self-certification form, and three references for projects of similar scope by December 1, 2026. Awardees must provide proof of insurance and comply with federal regulations, including FAR 52.204-10 regarding executive compensation reporting and FAR 52.222-4 regarding work hours and safety standards. Additionally, the project is subject to Davis-Bacon Act prevailing wage rates for Canyon and Gem Counties, Idaho, and requires compliance with federal paid sick leave mandates.

Management & Training Corporation/Centennial Job Corps Center

POSTED

about 3 hours ago

DEADLINE

IFB No. 132779 Bldg 6028 & 801 Kitchen Hood Fire Suppression Systems Preventative Maintenance, Camp Roberts

Solicitation # 132779

The California Military Department is soliciting bids for IFB No. 132779 to provide comprehensive preventative maintenance for Kitchen Hood Fire Suppression Systems at Camp Roberts, specifically for Building 6028 and Building 801. The contractor is responsible for providing all labor, materials, bonds, insurance, and permits necessary to perform the work over a period of 1095 calendar days. Key performance requirements include a start-up meeting within five days of the notice to proceed and the execution of the first quarterly service within 15 days of contract execution. Maintenance for Building 6028 involves three units and for Building 801 involves one unit, with semi-annual visits scheduled for November and May. The prime contractor must possess a C-16 Fire Protection Contractor license. The contract will be awarded to the lowest responsive and responsible bidder, with a tie-breaking mechanism of a coin toss. Bidders must submit their proposals by December 10, 2026, at 2:00 PM, with a public bid opening following at 2:15 PM. Required documentation includes a rate sheet, bidder certifications, and various state and federal compliance forms, including DVBE declarations and non-collusion affidavits. Bonding requirements include a bid bond, a performance bond of 100% for contracts exceeding $9,999.99, and a payment bond for public works expenditures exceeding $24,999.99. All work must adhere to State General Prevailing Wage Rates, the Buy American Act, and the Americans with Disabilities Act.

California Military Department

POSTED

about 4 hours ago

DEADLINE

IFB No. 132845 Fire Suppression Systems Maintenance at Multiple Locations, Multiple Locations - Southern California

Solicitation # 132845

The California Military Department is soliciting bids under IFB No. 132845 for a three-year public works contract to provide comprehensive maintenance for commercial kitchen fire suppression systems and Class K portable fire extinguishers at six facilities, including the Barstow, Escondido, National City, Ontario, El Cajon, and Moreno Valley/March ARB armories. The scope of work includes semiannual services for suppression systems, annual services for extinguishers, and authorized corrective repairs and replacements. All work must adhere to NFPA 17A, NFPA 96, NFPA 10, California Title 19 regulations, and manufacturer requirements. The period of performance is estimated from April 1, 2027, to March 31, 2030. The prime contractor must possess a type C-16 Fire Protection Contractor license and be licensed to do business in California. Bids will be awarded to the lowest responsive and responsible bidder, with a 5% Disabled Veteran Business Enterprise (DVBE) participation goal and a $100,000 incentive cap for evaluation purposes. Required bid documentation includes a bid bond, a non-collusion affidavit, and various certifications regarding civil rights and the Darfur and Iran Contracting Acts. Performance and payment bonds are required if the contract exceeds specific monetary thresholds. Bids must be submitted by December 9, 2026, at 2:00 PM, with a public bid opening following shortly after.

California Military Department

POSTED

about 4 hours ago

DEADLINE

PEM Board Installation, Programming, and TestingThis subcontract involves the installation, programming, and testing of PEM boards for escalator projects managed by the Birmingham Airport Authority. The scope of work requires the removal of existing boards and the electrical connection of seven upgraded boards, specifically utilizing specialized programming interfaces for Schindler 9300 systems. The contractor is responsible for executing all necessary software updates to ensure the escalators are fully operational and providing the required verification documentation upon completion. To perform these services, personnel must undergo a background check and obtain a BAA security badge. The project falls under NAICS code 238290, with a response deadline set for December 4, 2026.

Birmingham Airport Authority

POSTED

about 9 hours ago

DEADLINE

Contract for the Execution of Fire Safety Works

Solicitation # CCS/26/235

The City and County of Swansea is seeking a contractor to execute fire safety works across various properties in Swansea, including fireproofing and fire-prevention installation. The project covers multiple locations such as Clyne Court, Griffith John Street, Matthew Street, Rheidol Court, Jeffreys Court, Gloucester House, Conway Court, Maes Y Efail, Cartersford Place, Heol Y Wern, Llanllienwen Close, Plas Melyn, and Waverley Close. The estimated contract value is 1,400,000 GBP excluding VAT, or 1,680,000 GBP including VAT, with a projected performance period from February 1, 2027, to September 30, 2027. The solicitation, numbered CCS/26/235, requires all works to comply with CDM Regulations 2015. Award decisions will be based on a weighted evaluation consisting of price (60%) and several quality factors, including technical capability (10%), project specifics (8%), CDM Regulations (8%), supply chain management (6%), stakeholder engagement (4%), and a Beyond Bricks and Mortar metric (4%). Interested parties must submit their proposals via the eTenderWales portal by the deadline of November 27, 2026, at 12:00pm, using ITT - 127749 for the search.

City & County of Swansea

POSTED

about 9 hours ago

DEADLINE

Calcium Aluminate Coating SpecialistThis subcontract for a Calcium Aluminate Coating Specialist involves applying specialized coatings to the interior of 48-inch and 60-inch sanitary sewer manholes for prime contractors on City of Pueblo Wastewater projects. The selected provider must utilize specific calcium aluminate materials and application equipment to ensure all work meets strict bond, flexural, and compressive strength requirements. The scope of work concludes with the delivery of fully coated and sealed manhole interiors, backed by a two-year warranty on workmanship. Interested parties must respond by December 2, 2026, for this project categorized under NAICS code 238290.

POSTED

about 11 hours ago

DEADLINE

Albany UltraFast Door Controller Installation and ProgrammingThis small business set-aside subcontract involves the removal, installation, and programming of a primary internal logic controller for Albany UltraFast high-speed roll-up door systems at Fairchild Air Force Base. The selected contractor will be responsible for programming the controller for specific door operations, adjusting safety devices and controls, and conducting comprehensive system testing to ensure full operational functionality. The project requires the contractor to maintain U.S. citizenship and coordinate directly with 92 CES regarding electrical power requirements. This effort is managed under the Department of Defense for the 92 Cons Lgc agency, with a response deadline set for November 20, 2026.

FA4620 92 Cons Lgc

POSTED

about 14 hours ago

DEADLINE

Microbulk Oxygen Tank Provider and InstallerThis subcontract opportunity through the Department of Defense involves the supply and installation of a vacuum-insulated stationary microbulk stainless steel oxygen vessel for prime contractors at the Corpus Christi Army Depot. The project requires the delivery of a fully operational high-pressure and high-flow vessel with an approximate gross capacity of 3,000L. All work must be performed in strict accordance with industry safety and engineering standards, including ASME BPVC Section VIII, ASME B31.3, OSHA 29 CFR 1910.104, and NFPA 55. The performance location is situated in Corpus Christi, Texas, under NAICS code 238290, with a response deadline set for November 18, 2026.

W6QK Ccad Contr Office

POSTED

about 14 hours ago

DEADLINE

Dike B Generator Installation, Mansfield Hollow Dam, Mansfield Center, CT

Solicitation # W912WJ27QA001

The U.S. Army Corps of Engineers New England District is soliciting quotes for the construction and commissioning of a new power system for the Dike B Operator unit at Mansfield Hollow Dam in Mansfield Center, Connecticut. This total small business set-aside project, under NAICS code 238290, has an estimated value between $25,000 and $100,000. The scope of work includes comprehensive site preparation, the construction of a reinforced concrete generator pad, and the installation of secure perimeter fencing. The contractor is responsible for procuring and installing a standalone 15kW propane-powered generator and two 120-gallon propane fuel storage tanks, followed by final electrical integration into the existing control panel and sluice gate operator unit. The period of performance is 300 days from the Notice to Proceed, with work restricted to Monday through Friday, 7:00 AM to 3:30 PM. Technical requirements specify the use of 3/4 inch ASTM D2513 approved High-Density Polyethylene gas piping and compliance with NFPA 58 underground installation standards and IEEE C2 grounding standards. All work must adhere to the EM 385-1-1 Safety and Health Requirements Manual and applicable OSHA regulations. Award will be granted to the responsible vendor whose quotation is most advantageous to the government, based on technical capability, past performance from the last three years, and price. To be considered responsive, vendors must maintain an active SAM.gov registration, complete a mandatory solicitation survey including professional certifications, and submit signed copies of all material amendments. Payments will be processed electronically through the Wide Area WorkFlow system. The final deadline for response is November 18, 2026.

W2SD Endist New England

POSTED

about 14 hours ago

DEADLINE

Construction Services for replacing the wire ropes and designated associated sheave blocks, Franklin, New Hampshire.

Solicitation # W912WJ27X1CX1

The U.S. Army Corps of Engineers, New England District, is seeking capabilities statements for a construction project to replace the wire ropes and associated sheave blocks for the number 1 service gate at the Franklin Falls Dam in Franklin, New Hampshire. The scope of work involves installing 1,085 linear feet of 1-inch stainless steel wire rope meeting US Steel Manufacture Requirements with a minimum breaking strength of 100 tons, as well as replacing five lower sheave block assemblies including pins, bushings, and various plates. All work must adhere to ASME B30 standards and industry standards for Load Handling Equipment, specifically following specification sections 35 01 70.13 and 35 20 16.53. The project is estimated to cost between $350,000 and $500,000, with solicitation planned for Spring 2027 and construction beginning in the Spring or Summer of 2027. This Sources Sought Announcement is intended to determine the availability and capability of small businesses, including 8(a), HUBZone, Service-Disabled Veteran-Owned, and Women-Owned concerns, under NAICS code 237990. Interested firms must submit a capabilities package by November 25, 2026, including business classification, proof of bonding capability, and two examples of similar work performed within the last seven years.

W2SD Endist New England

POSTED

about 14 hours ago

DEADLINE

Elevator Removal and InstallationThis subcontract opportunity involves the removal of an existing four-stop elevator and the installation of a complete new system at a State University of New York Cobleskill facility. The scope of work includes the removal of old components and the installation of new rails, cabs, motors, and control systems, concluding with full testing and commissioning to deliver a fully operational system. Eligible bidders must hold a New York State Licensed Elevator Contractor certification. The solicitation was posted on November 10, 2026, with a response deadline of December 8, 2026. This project falls under NAICS code 238290 and is intended for prime contractors managing facility projects for the agency.

State University of New York (SUNY)

POSTED

about 21 hours ago

DEADLINE

More opportunities from University System of New Hampshire

Same awarding agency

Vehicle Hauling and Delivery ServicesThis subcontract for Vehicle Hauling and Delivery Services involves the transport and delivery of four passenger vans for prime contractors working on University System of New Hampshire procurement projects. The selected provider will be responsible for loading, hauling, and unloading the vehicles using either flatbed transport trailers or multi-car carriers, ensuring all deliveries reach the designated USNH locations by December 2026. To comply with Department of Transportation regulations, the service provider must hold a valid Commercial Driver's License. This opportunity falls under NAICS code 484220 and was posted on November 10, 2026, with a response deadline of November 16, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 21 hours ago

DEADLINE

Passenger Van SupplierThis subcontract agreement establishes a partnership with a supplier to provide four completed passenger vans for prime contractors working on University System of New Hampshire procurement projects. Each vehicle must meet specific capacity requirements, featuring a minimum of 10 seats and a maximum of 15 passengers. The supplier is responsible for coordinating the final delivery of all vehicles to the University of New Hampshire by December 2026. This procurement falls under NAICS code 441110 and is managed through the University System of New Hampshire.

New Car Dealers

POSTED

about 21 hours ago

DEADLINE

Passenger Vans for UNH

Solicitation # 212026881

The University System of New Hampshire is soliciting bids under solicitation number 212026881 for the purchase of four passenger vans. Each vehicle must be capable of seating a minimum of 10 and a maximum of 15 passengers. The procurement is being managed by the University of New Hampshire, with Brenda Bowers serving as the primary point of contact. The solicitation was posted on November 10, 2026, and formal proposals must be submitted by November 16, 2026, at 12:00 p.m. All delivered vehicles must be provided by the first week of December 2026.

New Car Dealers

POSTED

about 21 hours ago

DEADLINE

West Elevator Car Enclosure InstallationThe West Elevator Car Enclosure Installation is a subcontract opportunity with the University System of New Hampshire for the demolition and replacement of the existing West elevator car interior. The selected contractor will be responsible for removing the old interior and installing new car enclosure panels and interior finishes to deliver a fully completed enclosure. Interested parties must submit their responses by December 11, 2026. The project requires strict adherence to UNH insurance requirements and the provision of both performance and payment bonds to ensure successful completion of the work.

All Other Specialty Trade Contractors

POSTED

DEADLINE

in about 1 month

East Elevator Car Enclosure InstallationThe East Elevator Car Enclosure Installation is a subcontract opportunity with the University System of New Hampshire for the demolition and replacement of the East elevator car interior. The selected contractor will be responsible for removing the existing interior and installing new car enclosure panels and interior finishes to deliver a completed enclosure. Interested parties must submit their responses by December 11, 2026. The project requires strict adherence to UNH insurance requirements and the provision of both performance and payment bonds to ensure successful completion of the installation.

All Other Specialty Trade Contractors

POSTED

DEADLINE

in about 1 month

Elevator Controller Installation and CommissioningThis subcontract for Elevator Controller Installation and Commissioning involves the replacement of elevator controllers for prime contractors at the University of New Hampshire. The scope of work includes the removal of existing controllers, the installation of new units according to the Memorial Union Building Hydraulic Improvement Spec, integration with current hydraulic systems, and final testing and commissioning to ensure a fully operational system. The project is managed under the University System of New Hampshire, with a response deadline of December 11, 2026. To be eligible, contractors must provide performance and payment bonds and maintain full compliance with the university's insurance requirements. The work falls under NAICS code 238290.

Other Building Equipment Contractors

POSTED

DEADLINE

in about 1 month

Elevator Components SupplyThis subcontract for Elevator Components Supply involves the provision of elevator cylinders and door assemblies for prime contractors working on University System of New Hampshire facility projects at the Dimond Library. The selected provider is responsible for manufacturing or sourcing cylinders, matching door frames, and hardware that adhere to project-specific technical requirements. Additionally, the contractor must provide necessary manufacturer certifications regarding load-bearing capacity and safety, ensuring all specified components are delivered directly to the project site. The opportunity was posted on November 9, 2026, with a response deadline of December 18, 2026. Classified under NAICS code 333998, the contract is managed by the University System of New Hampshire. Interested parties can find further details and submission guidelines through the official SciQuest procurement portal.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

in about 1 month

UNH Memorial Union Building Elevator Controller Replacements

Solicitation # 2120271006

The University System of New Hampshire, representing University of New Hampshire Facilities Project Management, is soliciting bids for the Memorial Union Building Elevator Controller Replacements under solicitation number 2120271006. The project is located at the Memorial Union Building at 83 Main Street, Durham, NH. The scope of work consists of a base bid for controller replacements, with two optional alternates for the East and West elevator car enclosures. Technical requirements are governed by specific hydraulic improvement specifications, elevator construction documents, and USNH standard design documents. Bids must be submitted by December 11, 2026, at 12:00 p.m. EST. Required submission materials include a bid form, sub-bid list, alternate bids, a statement of qualifications, a project data form, and a subcontractor employee master list. The contract requires the provision of bid, performance, and payment bonds, as well as adherence to USNH insurance requirements for construction contracts. Karen Sayers serves as the primary point of contact for this solicitation.

Other Building Equipment Contractors

POSTED

DEADLINE

in about 1 month

UNH Dimond Library Elevator Upgrades

Solicitation # 2120271007

The University System of New Hampshire, representing the University of New Hampshire Facilities Project Management, is soliciting bids for the Dimond Library Elevator Cylinder and Door Replacements. This project, identified by solicitation number 2120271007, is located at the Dimond Library front entrance at 18 Library Way in Durham, New Hampshire. The scope of work focuses on specific elevator upgrades, with detailed technical requirements and performance specifications provided in the project's dedicated specification and design documents. Interested bidders must submit formal proposals by December 18, 2026, at 12:00 p.m. The submission process requires several key documents, including a Bid Form, Statement of Qualifications, Project Data Form, and a Sub Bid List. To be eligible, firms must disclose their vendor debarment status, acknowledge the US NH terms and conditions, and confirm their willingness to provide financial statements upon request. Additionally, contractors must comply with specific insurance requirements for construction contracts and provide bid, performance, and payment bonds.

Other Building Equipment Contractors

POSTED

DEADLINE

in about 1 month

Structural Engineering ServicesThis subcontract for Structural Engineering Services involves providing specialized structural analysis and design for prime contractors working on University System of New Hampshire facility projects. The scope of work focuses on designing foundations for new growth chambers and conducting load-bearing capacity analyses for greenhouse glazing systems and various equipment. The selected provider will be responsible for delivering all necessary structural calculations along with detailed foundation and framing drawings. The opportunity is categorized under NAICS code 541330 and was posted on November 3, 2026, with a response deadline of November 13, 2026. Interested parties can find further details through the University System of New Hampshire procurement portal.

Engineering Services

POSTED

DEADLINE

Plumbing and Irrigation EngineeringThis subcontract for Plumbing and Irrigation Engineering involves providing specialized design services for the University System of New Hampshire. The scope of work focuses on the development of water supply, drainage, and irrigation systems, specifically including water lines for automated irrigation, nutrient delivery piping, and floor drainage systems for greenhouse runoff. The selected provider will be responsible for delivering comprehensive plumbing and irrigation schematics and specifications to prime contractors. The opportunity is categorized under NAICS code 541330. Interested parties should note that the posting date is November 3, 2026, with a response deadline set for November 13, 2026. Further details and submission processes are managed through the University System of New Hampshire's procurement portal.

Engineering Services

POSTED

DEADLINE

Electrical Engineering ServicesThis subcontract for Electrical Engineering Services involves the design of electrical distribution and lighting systems for prime contractors working on University System of New Hampshire facility projects. The scope of work specifically includes designing power distribution for growth chamber equipment and specifying specialized LED and HPS growth lighting tailored for humid greenhouse environments. Key deliverables for the project consist of comprehensive electrical plans, detailed lighting layouts, and precise load calculations. The opportunity is categorized under NAICS code 541330 and was posted on November 3, 2026, with a response deadline of November 13, 2026. Interested parties can find further details through the University System of New Hampshire procurement portal.

Engineering Services

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Elevator and Vertical Transportation Service

NYS Office of General Services

POSTED

DEADLINE

RFB 2026-38 Cazenovia Elevator Modernization- REBID

Solicitation # 2140668

POSTED

DEADLINE

HVAC Controls System Integrator

Bulloch Board of Education

POSTED

DEADLINE

in about 1 month

DDC Controls and Sequence of Operations

DAS Procurement

POSTED

DEADLINE

Window Repair and Glazing Services

POSTED

DEADLINE

in about 1 month

Window Installation and Replacement Services

POSTED

DEADLINE

in about 1 month

Elevator Systems Installation

Manchester Community Schools

POSTED

DEADLINE

HVAC Controls and Automation Integration

Charlotte/mecklenburg Schools

POSTED

DEADLINE

Tioga County 103 Corporate Drive - Overhead Door Construction

Solicitation # 2140630

POSTED

DEADLINE

Elevator, Chair Lift, and Dumbwaiter Maintenance and Repair Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS