Top

Environmental Compliance and GHG Reporting

Active

International

Response Deadline08/25/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Government of Canada → National Research Council of CanadaView Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

Canada, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 16

subcontract

Response DeadlineAug 25

Submission deadline

Response Deadline

08/25/2026, 07:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyGovernment of Canada → National Research Council of Canada

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → National Research Council of Canada

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Monitor and report greenhouse gas emissions from construction activities, ensuring compliance with federal GHG reduction targets.

Similar Contracts

Same NAICS industry code

NAICS: 541620

New

SLED

CT 12356 - Noise Insulation Program Consulting ServicesThe contract titled CT 12356 - Noise Insulation Program Consulting Services is a solicitation issued by the California Procurement Services agency under the SLED organization type, aimed at securing consulting services to support a noise insulation program. The solicitation was posted on July 17, 2026, with a response deadline of August 13, 2026, and is managed from the agency’s office in San Francisco, California. The primary point of contact is Anna Severt, Project Manager, reachable via email and phone, with Rochelle Laxamana, Principal Administrative Analyst, serving as the secondary contact for additional inquiries. The place of performance is within the state of California, though the specific city is not designated. This solicitation seeks expert consulting services related to noise insulation, likely involving assessment, planning, and implementation support for mitigating noise impacts, though the full scope of work is not detailed in the provided data. There is no indicated set-aside classification or NAICS code, suggesting the contract is open to general competitive bidding. The procurement is administered through the California government’s open procurement portal, and interested vendors must submit responses by the stated deadline to be considered. All communications and submissions are expected to be directed to the provided contact information, with the understanding that services will be performed throughout the state of California.

POSTED

DEADLINE

Multimodal Integration & Accessibility DesignThe contract titled Multimodal Integration & Accessibility Design requires comprehensive planning and design services to ensure seamless connectivity between pedestrian, bicycle, and paratransit systems, with strict adherence to all Americans with Disabilities Act standards across every facility and access point. The work must guarantee universal accessibility, equitable mobility, and inclusive infrastructure that supports users of all abilities, integrating physical design, signage, wayfinding, and operational protocols to meet federal compliance requirements without exception. This subcontract is classified under NAICS code 541620 for engineering services and is managed by the Tennessee Engineering agency, with a response deadline of August 25, 2026. The project scope demands technical expertise in accessible transportation design, coordination with local transit authorities, and implementation of best practices for multimodal networks. While specific location details are not provided, performance will occur within Tennessee, and all deliverables must reflect a commitment to safety, accessibility, and system-wide interoperability for non-motorized and specialized transit users.

POSTED

DEADLINE

Food Manufacturing Systems Implementation & Regulatory ComplianceThe contract requires the implementation of comprehensive food safety and regulatory compliance systems including HACCP, GMP, and SSOP, alongside full OSHA adherence, to support the activation of an assembly line within the PDC. The goal is to establish a fully compliant manufacturing environment that ensures product safety, worker protection, and alignment with federal standards, with all systems designed for seamless integration and operational readiness. The work must be completed under a subcontract arrangement, with strict deadlines requiring proposal submission by August 10, 2026, and the primary oversight is managed by Alcorn State University in Mississippi, under NAICS code 541620 for management consulting services.

ALCORN STATE UNIVERSITY

POSTED

DEADLINE

Technical Reporting & Data ManagementThe contract under the title Technical Reporting & Data Management involves the provision of formal test reports, comprehensive data analysis, and quality assurance reviews aligned with military or ASTM standards, ensuring all deliverables meet stringent governmental technical requirements. All results must be securely transmitted to government authorities using authorized systems such as WAWF, guaranteeing compliance with defense data handling protocols and confidentiality standards. The work is performed under a subcontract and falls under NAICS code 541620, classifying it within scientific and technical consulting services, with the Defense Logistics Agency acting as the contracting entity under the Department of Defense. The performance location and specific office details are not specified, but the deliverables are intended for federal defense use and must adhere to official military documentation formats.

Defense Logistics Agency

POSTED

DEADLINE

Sustainable Product Compliance & Certification SupportThe contract entails providing specialized consulting services to ensure full alignment with federal sustainable procurement initiatives, focusing on compliance with key programs managed by the EPA, ENERGY STAR®, USDA BioPreferred®, and SNAP. The work supports adherence to environmental and sustainability standards across federal supply chains, requiring expertise in product certification, regulatory interpretation, and documentation processes to meet mandated requirements. Services will involve evaluating products, verifying claims, and assisting stakeholders in navigating complex certification pathways to maintain eligibility under these federal green procurement guidelines. This subcontract is issued under the Defense Logistics Agency, part of the Department of Defense, with the NAICS code 541620 indicating management, scientific, and technical consulting services as the primary classification. The contract was posted on July 17, 2026, and is intended to facilitate federal compliance through expert guidance rather than direct product supply. While the exact location of performance is unspecified, the engagement is tied to nationwide DLA operations and requires adherence to federal sustainability mandates. The contractual obligations center on delivering accurate, timely, and auditable support to ensure products and procurement activities consistently meet evolving environmental standards.

Defense Logistics Agency

POSTED

DEADLINE

Radioactive Materials Handling & Notification ServicesThe contract requires the assessment of components for radioactive content, with strict protocols to identify and report any instances where regulatory thresholds are exceeded directly to the Contracting Officer. All materials must be evaluated against defined safety and compliance standards to ensure no radiological hazards are inadvertently distributed. The contractor is obligated to maintain rigorous documentation and verification processes throughout the assessment phase to guarantee accuracy and accountability. Additionally, the contract mandates that all components be marked in full compliance with MIL-STD-129 standards for military labeling and shipment documentation. This includes proper identification, formatting, and placement of barcodes and other required markings to support traceability and handling across the defense logistics chain. The work falls under NAICS code 541620 and is administered by the Defense Logistics Agency under the Department of Defense, with performance expected to align with federal defense supply chain requirements without formal set-aside designation.

Defense Logistics Agency

POSTED

DEADLINE

Hazardous Materials Compliance & SDS ManagementThe contract requires the identification of hazardous components within materials and systems, ensuring full compliance with OSHA’s Hazard Communication Standard 29 CFR 1910.1200 and Federal Standard No. 313. Primary responsibilities include the accurate preparation, maintenance, and distribution of Safety Data Sheets that meet federal regulatory requirements for chemical safety and hazard communication. All labeling associated with hazardous materials must be reviewed and updated to reflect current standards, ensuring clarity, completeness, and compliance across all stages of handling and distribution. This work supports the Defense Logistics Agency’s broader mission to maintain safety and regulatory integrity within Department of Defense supply chains. The subcontract is classified under NAICS code 541620, indicating it involves scientific and technical consulting services focused on environmental and safety compliance.

Defense Logistics Agency

POSTED

DEADLINE

Hazardous Materials Labeling and ComplianceThe contract pertains to the application of hazard warning labels and the preparation of safety data sheets for hazardous components, ensuring full compliance with federal and Department of Defense regulations. This subcontract is specifically focused on the accurate labeling and documentation of hazardous materials to meet stringent safety and regulatory standards required for military and defense applications. The work is to be performed at Tracy, California with a zip code of 95304-5000, and the NAICS code 541620 indicates it falls under scientific and technical consulting services, suggesting a technical and compliance-driven scope. The solicitation was posted on July 17, 2026, with responses due by July 22, 2026, indicating a narrow timeframe for submission. The contracting organization is the Department of Defense under the Construction & Equipment T & IFO EQ office, and all activities must adhere to federal and DoD mandates governing hazardous material handling, transportation, and communication of associated risks.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

Sustainable & Regulated Product Sourcing ConsultantThe contract engages a consultant to provide advisory support for ensuring a water testing kit aligns with key federal sustainability mandates, including the EPA’s Safer Choice program under SNAP, the USDA BioPreferred Program, and the Federal Acquisition Regulation clause FAR 52.223-23 concerning environmentally preferable procurement. The work focuses on guiding product development and sourcing to meet federal environmental standards, ensuring compliance with requirements for biobased content, reduced environmental impact, and sustainable materials selection. The consultant will serve as a subject matter expert to navigate regulatory frameworks and support the contractor in adhering to mandatory green procurement policies. This subcontract is issued under the Department of Defense through the Defense Logistics Agency, categorized under the NAICS code 541620 for Management Consulting Services. The contract was posted on July 17, 2026, and is positioned as a subcontract within the broader defense acquisition structure, with no specified set-aside status. The place of performance and official contact details are not provided, but the work is expected to be conducted remotely or as needed to coordinate with the contracting team, leveraging expertise in federal sustainability compliance to validate the product’s alignment with environmental and procurement regulations.

Defense Logistics Agency

POSTED

DEADLINE

Hazardous Materials Compliance and LabelingThe contract requires full compliance with OSHA HazCom standards and DFARS 252.223-7001 for all hazardous materials managed under the agreement, with a focus on producing accurate safety data sheets, applying compliant labeling, and maintaining rigorous regulatory tracking systems. The contractor must ensure that all hazardous substances are properly documented, labeled, and reported in accordance with federal occupational safety and defense procurement regulations, supporting safe handling and transportation across Department of Defense supply chains. This is a subcontract under the Defense Logistics Agency’s procurement, classified under NAICS code 541620 for environmental consulting services, and was posted on July 17, 2026. Performance is expected to support Defense Department operations without specified geographic limitations, and the contract is tracked under award number SPE7M326P1314. Success requires continuous monitoring of regulatory updates and implementation of standardized processes to meet both safety and contractual obligations for hazardous material management.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Hazardous Waste Management Plans (HWMP) and DocumentationThe contract entails the development and submission of site-specific Hazardous Waste Management Plans and Waste Management Plans in strict alignment with environmental regulations and military standards. The work requires careful assessment of facility operations, proper identification and classification of hazardous materials, and formulation of protocols for safe handling, storage, transportation, and disposal of waste. All documentation must meet the rigorous compliance requirements of federal and Department of Defense environmental policies, ensuring that each plan is tailored to the unique operational and geographic conditions of the assigned sites. This subcontract, issued under NAICS code 541620 by the Defense Logistics Agency within the Department of Defense, supports critical environmental management functions across military installations. The contractual obligations involve not only the creation of comprehensive, actionable plans but also the accuracy and timeliness of all related submissions, with an emphasis on audit readiness and regulatory adherence. The performance location and specific site details are not specified in the available data, but deliverables are expected to be coordinated with military personnel and environmental oversight entities to guarantee full operational and regulatory compliance. The award is accessible through the DIBBS platform, reflecting its formal standing within DoD procurement systems.

Defense Logistics Agency

POSTED

DEADLINE

Regulatory Compliance and Documentation ServicesThe contract entails the preparation and management of regulatory documentation critical to environmental and transportation compliance, specifically focusing on EPA manifests, HIN codes, PG/LINE codes, and DLA Form 2505 invoicing. These activities are essential to maintaining adherence to RCRA, DOT, and Department of Defense regulations, ensuring proper handling, tracking, and reporting of hazardous materials and waste throughout the supply chain. The work requires specialized knowledge of federal compliance frameworks and meticulous attention to detail to avoid regulatory violations and support operational continuity for defense logistics. This is a subcontract under the Defense Logistics Agency, part of the Department of Defense, with a NAICS code of 541620 indicating it falls under environmental consulting and related services. The contract was posted on July 17, 2026, and its place of performance and specific office details are not provided, suggesting the scope may be flexible or nationwide. The UI link directs to a DIBBS portal record, indicating the award is managed through DoD’s defense procurement system, and the responsibilities are tied directly to supporting defense logistics operations through accurate and timely regulatory documentation.

Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

N/A

View Details

More opportunities from Government of Canada → National Research Council of Canada

Same awarding agency

NAICS: 238190

New

International

M-10 Partial Exterior Envelope ReplacementThe contract pertains to the exterior envelope and main entrance renewal of Building M-10 at the National Research Council Canada’s campus located at 1200 Montreal Road, Ottawa, Ontario, K1A 0R6. This procurement, identified by solicitation number 26-58015 under NAICS Code 238190, is exclusively open to Canadian suppliers due to the Policy on Reciprocal Procurement, and submissions from non-trading partners will be rejected. Bidders are required to attend one of two mandatory site visits on June 16 or 17, 2026, at the main entrance of Building M-10. Proposals must be submitted by July 22, 2026, and all work must be completed by March 31, 2027, with a performance period of 36 weeks from notification of award. The scope includes demolition, concrete restoration, metal fabrications, thermal and moisture protection systems, aluminum doors and glazing, gypsum board assemblies, and granular backfill, all executed in accordance with specified construction sections and technical requirements. Contractors must retain a qualified geotechnical engineer for investigations and testing, and all materials must be delivered in original factory packaging, labeled with manufacturer details, and stored off the ground in dry, clean, well-ventilated areas per manufacturer instructions. Packaging waste must be removed and returned as per the Construction Waste Management Plan. The contractor is obligated to comply with stringent security protocols, including valid Security Clearance for all personnel as outlined in SC01, and must maintain site security during alterations. Performance and payment bonds in prescribed government formats, issued by federally, provincially, or territorially licensed sureties, are mandatory. Insurance coverage must be obtained from insurers licensed to operate in Canada, and compliance with both Ontario and federal occupational health and safety regulations is required. All quality control testing must be conducted by independent agencies paid for by the contractor, with reports submitted digitally and including project identification, agency details, and dates. Final aesthetic standards demand defect-free surfaces, with walls and ceilings inspected under specified viewing conditions and lighting, and all products must be new, undamaged, and of the highest quality. The contractor must maintain complete and accurate financial records in machine-readable formats such as Excel, available for audit at Canada’s request during normal business hours. Cost breakdowns must be submitted within 72 hours of award and serve as the basis for all claims. A master Gantt

Other Foundation, Structure, and Building Exterior Contractors

POSTED

DEADLINE

Indigenous Participation Plan (IPP) Implementation

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Watermain Pipes and Fittings Supply

Plumbing and Heating Equipment and Supplies (Hydronics) Merchant Wholesalers

POSTED

DEADLINE

Surveying and As-Built Documentation

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE

Watermain Installation and Excavation

Water and Sewer Line and Related Structures Construction

POSTED

DEADLINE

FurnitureThis procurement solicitation under reference number 25-58244 B is issued by the National Research Council of Canada for the purchase, delivery, and installation of office furniture at Building M-38, 1200 Montreal Road, Ottawa, Ontario, with a required delivery and installation date of October 2, 2026. The requirement falls under the PWGSC Furniture for Workspaces Supply Arrangement E60PQ-140003/D and targets Product Categories 2 (Work Surface Products), 3 (Filing and Storage Products), 5 (Ancillary Products), and 6 (Collaborative Products), specifying precise quantities for items such as fixed height work surfaces, hutches, personal storage towers, monitor arms, power modules, cable troughs, and various meeting and collaborative tables. All proposed products must comply with the ANSI/BIFMA e3 Furniture Sustainability Standard at Level® 2 and adhere to Government of Canada Workplace Fit-up Standards, with technical specifications outlined in Annex A being verified by NRC against mandatory criteria. Only suppliers holding a pre-qualified Supply Arrangement under the designated SA series are eligible to respond, though non-SA holders may submit bids if they simultaneously apply for an arrangement with the Supply Arrangement Authority. The evaluation process is based on lowest evaluated price, with two mandatory pass/fail gates: submission of detailed drawings and specifications for NRC verification, and a firm confirmation of the October 2, 2026 delivery commitment; failure to meet either results in non-responsiveness. Offers must be submitted electronically in two separate, labeled attachments—Technical Offer and Financial Offer—with no financial data permitted in the technical submission, and all submissions limited to 10MB without zip files or external links. Additional requirements include compliance with the Security Requirements Checklist, adherence to site health and safety protocols, and certification of continued compliance with all qualifications under the SA series, including employment equity, integrity provisions, and price certifications. Invoicing must be conducted via email to the designated NRC remittance address, and payment may be processed by credit card if the supplier’s SA permits it, while all communications must be routed exclusively through the designated contracting authority. The solicitation is governed by multiple international trade agreements including the WTO-AGP, CETA, CPTPP, and several bilateral free trade agreements, and all bids must be received by the closing deadline of July 22, 2026, at 2:00 PM

POSTED

DEADLINE

POSTED

DEADLINE

Raman SpectrometerThe National Research Council Canada is seeking a single compact Raman spectrometer compatible with self-driving laboratories at Clean Energy Innovation’s Mississauga location, to be used for acquiring Raman spectra on films and powders, with future applications in in-operando studies of energy storage devices. The instrument must be lightweight, embeddable into devices, and include a 532 or 785 nm laser with a resolution under 25 cm⁻¹ and a spectral range of at least 200 to 2500 cm⁻¹. It must operate on 100–240 V AC, 50/60 Hz, without battery storage, and be supplied with a fiber optic cable, probe, and objective lens. A software development kit or application programming interface must be included to enable automated control and spectral acquisition via external scripts such as Python or C#. The spectrometer must be new, current, and delivered as a complete unit with all necessary accessories, and the contractor must provide evidence of electrical certification from a Standards Council of Canada-accredited body. The contract is a fixed-price, delivered-at-place arrangement in Canadian dollars, covering all delivery charges, excluding customs duties and applicable taxes. Responses are due by July 24, 2026, at 14:00 Eastern Time, submitted electronically via email as two separate attachments labeled "Technical Offer" and "Financial Offer"; financial information must not appear in the technical submission, or the offer will be disqualified. All submissions must adhere to strict formatting rules: no hard copies, fax transmissions, zip files, or external links, and the email size must not exceed 10 MB. Offers must include the completed front page of the solicitation, Annex A (Offer Submission Form), Annex B (Offeror Declaration Form), and a List of Names for integrity verification under the Ineligibility and Suspension Policy. The offeror must confirm compliance with international sanctions, anti-forced labor requirements, and reciprocal procurement rules, and ensure all personnel have the required security clearances as outlined in Annex E. Packaging must be environmentally preferable—reusable, returnable, or recyclable—with only packaging tape excluded. Delivery must occur within 30 calendar days of contract award, and acceptance by Canada is mandatory before payment. Invoices must be sent via email to the designated address, include detailed expenditure breakdowns, applicable taxes with registration numbers, and reference the CRN and PBN; payment will be made within 30 days of receiving a

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Large Slurry MixerThe National Research Council of Canada is soliciting a single large slurry mixer for use in its Clean Energy Innovation Research Center to support the preparation of viscous battery slurries for prototyping. The mixer must meet strict technical specifications including a maximum footprint of 3000 mm depth, 2000 mm width, and 3000 mm height, weigh less than 2000 kg, and be a stand-alone, floor-mounted unit operable by a single person. It must include an automatic temperature control system with a minimum capacity of 5000 kCal/h (6 kW) at 10°C, equipped with a control panel that displays slurry or tank surface temperature. The contract requires delivery of the mixer along with final design and drawings approved by NRC, successful completion of a Factory Acceptance Test, installation at 75 de Mortgage Boulevard, Boucherville, QC, followed by a Site Acceptance Test and comprehensive operator training. All deliverables must be completed within 11 months of contract award, with milestones set at two months for design approval, five months after design for FAT approval, and eight months for delivery of the mixer. Installation must begin within 30 days of delivery and be completed within another 30 days, accompanied by a service report and documentation in both English and French, in hard and digital PDF formats on a USB key. The offer must be submitted electronically in three separate sections—technical, financial, and administrative—with strict prohibition against including financial data in the technical offer and no use of zip files, links, hard copies, or fax. Proposals must be sent to a designated email address no later than August 7, 2026, and are subject to a 10MB file size limit. Only Canadian suppliers and suppliers from applicable trading partners are eligible; offers from non-trading partners will be rejected. The contract is a fixed price with customs duties excluded and applicable taxes extra. Payment follows a milestone-based structure of 15% for design, 15% for FAT, 45% for delivery, 10% for installation, 10% for SAT, and 5% for training, with invoices submitted by email to a specified address only after full completion of each deliverable and subject to 30-day payment terms. Canada reserves the right to inspect and accept all work, and failure to meet mandatory technical criteria defined in Annex G results in non-compliance and disqualification. The contractor is

All Other Industrial Machinery Manufacturing

POSTED

DEADLINE

South Campus Watermain Replacement

Water and Sewer Line and Related Structures Construction

POSTED

DEADLINE

Final Report Contribution and Strategic RecommendationsThe contract seeks contributions to a final report for the Department of National Defence, focusing on strategic recommendations in three core areas: terminology management, integration of machine translation systems, and long-term maintenance frameworks. The work is intended to support the modernization and standardization of language services within federal defense operations, ensuring consistency, accuracy, and scalability in multilingual communication. The deliverable must provide actionable insights grounded in best practices, with an emphasis on sustainable implementation and alignment with government-wide linguistic standards. The opportunity is classified as a subcontract under NAICS code 541610, indicating it relates to management consulting services, and is issued by the National Research Council of Canada on behalf of the Government of Canada. Proposals are due by July 30, 2026, with the work expected to be performed within the National Capital Region. Although no specific solicitation number or point of contact is provided, interested parties can access further details through the Canada Buys portal. The effort is part of a broader initiative to enhance language technology capacity across federal agencies, particularly where operational efficiency and linguistic precision are critical.

POSTED

DEADLINE

Terminology Extraction and Demonstration for F-35 ManualsThe contract seeks to extract technical terminology from F-35 maintenance and operational manuals or surrogate data sources to develop a validated, demonstrable terminology set specifically for use in machine translation testing. The work requires precise identification and curation of domain-specific language used in aerospace defense systems, ensuring the terminology reflects real-world usage and technical accuracy. The resulting set must be structured and formatted to support evaluation of machine translation systems under controlled conditions, with an emphasis on reliability, consistency, and applicability to complex technical documentation. This subcontract is issued by the National Research Council of Canada under the Government of Canada and is located within the National Capital Region. The solicitation was posted on July 15, 2026, with a response deadline of July 30, 2026. It falls under NAICS code 541990 for other scientific and technical consulting services and does not specify a set-aside classification. The goal is to enable advance testing of translation technologies by providing a grounded, authoritative terminology corpus derived directly from F-35 operational content, with performance expected to meet rigorous standards for precision and technical fidelity.

All Other Professional, Scientific, and Technical Services

POSTED

3 days ago

DEADLINE

in 12 days

View Details