This Government Contract opportunity from Department Of Commerce was posted on July 23, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Environmental Testing and Laboratory Analysis

Closed

Federal

Submission Closed08/04/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

DIBBS

Product Verification Testing and Source Inspection for Critical LightingThis subcontract involves providing product verification testing and source inspection services for critical lighting items under the DLA Weapons Support Nuclear Reactor Program. The selected contractor will be responsible for conducting inspections and tests using sampling methods per MIL-STD-1916 or ASQ H1331, while ensuring that identification markings comply with MIL-STD-130N. Specialized equipment capable of verifying MIL-DTL-16377/8C and MIL-DTL-16377K SUP 1 is required to complete these tasks, with the final deliverables consisting of detailed inspection reports and test results. The project is categorized under NAICS code 541380 and will be performed in New Cumberland, Pennsylvania. Interested parties must respond by November 9, 2026, to support the Department of Defense in maintaining the quality and compliance of critical components for nuclear reactor program projects.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Production Lot Testing (PLT) and Validation Services

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Production Lot Test (PLT) Services

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Non-Destructive Testing (NDT) & Specialized Inspection

POSTED

DEADLINE

Independent Testing & CommissioningThis subcontract for Independent Testing and Commissioning supports prime contractors on Department of the Air Force 36 CONS projects. The scope of work involves performing third-party quality assurance, independent testing, and final system commissioning to ensure all installed systems meet required standards. These activities are governed by a formal quality management plan and include conducting milestone inspections and providing final commissioning sign-off. The contractor is responsible for delivering comprehensive testing reports and inspection certifications to the Department of Defense. Classified under NAICS code 541380, the project focuses on rigorous verification and validation processes to ensure operational readiness and system integrity for the agency.

POSTED

DEADLINE

Fuel System Integrity Testing & CalibrationThis subcontract, titled Fuel System Integrity Testing and Calibration, involves providing specialized technical services for US Coast Guard fuel system projects at Station Sand Key in Clearwater Beach. The scope of work includes performing line leak detection, conducting integrity tests on transition sumps and Under Dispenser Containment, and calibrating clock gauges with 90 percent high-level warning alarms. The selected provider is responsible for delivering all calibrated gauges and certified test reports to the prime contractors. Managed under the Department of Homeland Security for Base Miami Beach, this opportunity is designated as a total Small Business Set Aside under NAICS code 541380. The solicitation was posted on October 29, 2026, with a response deadline of November 13, 2026.

POSTED

DEADLINE

ENVIRONMENTAL QUALIFICATION TESTING (EQT)

Solicitation # N0016427SNC12

The US Navy, through NSWC Crane, is issuing a Request for Information (RFI) under announcement N00164-27-S-NC12 to identify qualified contractors capable of performing Environmental Qualification Testing (EQT) and electromagnetic compatibility (EMI) testing. The objective is to verify that the Combined All-Domain Command and Control System Afloat (CAC2S Afloat) Data Processing Assembly and Workstation Mount meet naval shipboard survival and operational requirements following a hardware technology refresh. Testing must adhere to several military standards, including MIL-DTL-901E for shipboard shock, MIL-STD-167-1A for vibration, MIL-STD-461G for electromagnetic interference, MIL-STD-810H for environmental engineering, and MIL-STD-1399 for shipboard power interfaces. Interested parties must be registered in the System for Award Management (SAM) and the Joint Certification Program (JCP) to access the full Statement of Work. The government is seeking capabilities and budgetary estimates from commercial firms, non-profits, and academic institutions, with a strong encouragement for small and disadvantaged businesses to respond. Submissions, which may include a white paper of up to five pages and company literature, are due by November 18, 2026. While this RFI is used for market research to determine if the effort should be pursued via sole source or competitive procurement, the government explicitly states that no funding is currently available and this notice does not constitute a formal solicitation or commitment to award a contract.

POSTED

DEADLINE

OGDC-SCM-SER-CB-DO-342367717-2026 HIRING OF TUBULAR INSPECTION SERVICES

Solicitation # OGDC-SCM-SER-CB-DO-342367717-2026

The Oil & Gas Development Company Limited (OGDCL) has issued solicitation number OGDC-SCM-SER-CB-DO-342367717-2026 for the hiring of tubular inspection services to be performed in Pakistan. This procurement opportunity was posted on October 29, 2026, and requires interested parties to submit their e-bids through the SAP Ariba Discovery portal. The deadline for bid submissions is November 16, 2026, at 14:30 hours, with bid openings scheduled to occur 30 minutes after the closing time. Administrative inquiries and coordination are managed by the General Manager of Supply Chain Management at the OGDC Headquarters in Islamabad. While the specific contract value and detailed performance schedules are not provided in the initial solicitation notice, the primary objective is the procurement of specialized tubular inspection services.

Oil & Gas Development Company Limited (OGDCL)

POSTED

DEADLINE

Construction Testing and Inspection Services

POSTED

DEADLINE

Independent Performance Verification and TestingThis subcontract, titled Independent Performance Verification and Testing, is issued by the National Research Foundation of Korea for work to be performed in South Korea. The project focuses on providing third-party testing and certification for prime contractors involved in International Joint Research Rapid Support Project optical interconnect initiatives. The selected provider will act as an independent evaluation agency to verify that performance meets all required technical specifications. The scope of work involves measuring response characteristics and modulation bandwidth utilizing specialized equipment, including optical power meters, spectrum analyzers, and high-speed oscilloscopes. The primary deliverable for this engagement is the production of official certified test reports. Interested parties should note the response deadline of November 11, 2026.

National Research Foundation of Korea

POSTED

DEADLINE

Hazardous Materials Sampling and Laboratory AnalysisThis subcontract opportunity is for the provision of hazardous materials sampling and laboratory analysis services at California State University, Chico. The selected vendor will be responsible for performing chemical and physical analyses on material and air samples, specifically testing for the presence of asbestos, lead, and PCBs. All work must be conducted through an appropriately licensed and accredited laboratory facility to ensure the delivery of certified test reports and accurate analysis data for prime contractors. The project is located in Chico, California, and falls under NAICS code 541380. Interested parties must submit their responses by the deadline of November 12, 2026. This contract focuses on maintaining safety and compliance through rigorous baseline and air sample analysis for various hazardous materials projects across the university campus.

California State University, Chico

POSTED

DEADLINE

Specialized Testing and Materials Lab ServicesThis subcontract for Specialized Testing and Materials Lab Services supports prime contractors on facility projects at California State University, Chico. The selected provider will perform a variety of critical construction material evaluations, including concrete slump tests, cylinder breaks, soil compaction, Proctor tests, asphalt density testing, and non-destructive steel and weld testing. To ensure quality and compliance, the contractor must utilize accredited laboratory facilities and maintain AASHTO or ASTM accreditation. The scope of work requires the delivery of certified laboratory test reports and detailed field testing logs. This opportunity is categorized under NAICS code 541380 and is based in Chico, California. Interested parties must submit their responses by the deadline of November 12, 2026.

California State University, Chico

POSTED

about 9 hours ago

DEADLINE

in 14 days

AI Contract Overview

The contract involves the collection and laboratory analysis of soil, air, and building material samples to detect hazardous substances including asbestos, lead, and PCBs using approved analytical methods such as PLM, GMR, and TEM, all in strict compliance with New York State and Federal Aviation Administration standards. Work is to be performed at specified locations in Glens Falls, New York, with all testing procedures required to meet regulatory benchmarks for accuracy and chain-of-custody documentation. The opportunity is classified as a subcontract under NAICS code 541380, and it is issued by the Volpe National Transportation Systems Center within the Department of Commerce. Proposals must be submitted by August 4, 2026, at 5:00 PM, with the solicitation posted on July 23, 2026. No set-aside designation is specified, and all responders must ensure full adherence to the technical specifications, sample handling protocols, and reporting requirements as dictated by the referenced regulatory frameworks.

General Info

Collect and analyze soil, air, and building samples for asbestos, lead, PCBs in Glens Falls per NY and FAA standards.

Agency

Department Of Commerce → 6913G6 Volpe National Transportation System Cntr

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Glens Falls, NY, 12801, USA

Set-Aside

NONE

Documents

This scope was carved out of 6913G626Q300044.

The full solicitation package (6 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Demolition, Removal, and Remediation

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJul 23

subcontract

Response DeadlineAug 4

Deadline has passed

Submission Closed

08/04/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Commerce → 6913G6 Volpe National Transportation System Cntr

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Commerce → 6913G6 Volpe National Transportation System Cntr

Office AddressN/A

ContactsNo contact information available

Full Description

Collection and analysis of soil, air, and building material samples for asbestos, lead, PCBs using PLM, GMR, and TEM methods per NYS and FAA standards.