Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

ETCH, BONDING AGENT, DEN

Active
SPE2DH-26-T-5669Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of Ultra-Etch 4PK Kit, a viscous 35% phosphoric acid gel dental bonding agent, with each package containing four 1.2 mL syringes and twenty blue micro tips, totaling six packages as ordered. The product must have a minimum shelf life of 48 months, with no more than seven months elapsed between the date of manufacture and delivery to the government. All packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and must include clear labeling with the date of manufacture, expiration or retest date, and the contract or lot number, following the latest revision of MMS1A. Units must be sealed in protective containers and packed in commercial shipping containers suitable for safe transport via common carrier at the lowest rate to the specified delivery point in Suffolk, VA. The material must be marked per DLA’s Medical Marking Standard, and bidders are required to provide the source and part number. The acquisition is governed by DLA’s Master List of Technical and Quality Requirements, with applicable provisions including packaging standards and the potential handling of covered defense information. Delivery is required within five days after award, and the solicitation number is SPE2DH-26-T-5669, with a response deadline of August 6, 2026.

General Info

Procure six Ultra-Etch 4PK kits with 48-month shelf life, compliant labeling, delivered to Suffolk, VA within five days.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

339114 - Dental Equipment and Supplies ManufacturingView NAICS

Place of Performance

6701 COLLEGE DRIVE, DOORWAY 71, SUFFOLK, VA, 23435-5000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUS
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ETCH,BONDING AGENT,DENTAL
ETCH,BONDING AGENT,DENTAL
ULTRA-ETCH 4PK KIT;VISCOUS,35PCT PHOSPHORIC
ACID GEL. KIT INCLUDES;
(4) 1.2 ML (1.58 G) SYRINGES;AND
(20) BLUE MICRO TIPS.
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
UNIT OF ISSUE: PACKAGE (4 EA PER PG)
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SPE2DH-26-T-5669
SECTION B
..
..
1 PG = 4 EA
..
SHALL HAVE A SHELF LIFE OF 48 MONTHS.
NOT MORE THAN 7 MONTHS SHALL HAVE ELAPSED FROM
DATE OF MANUFACTURE TO DATE OF DELIVERY TO THE
GOVERNMENT.
.
SHELF LIFE MARKINGS SHALL BE IN ACCORDANCE WITH
THE LATEST REVISION OF MMS1A.
. ALL LABELS SHALL INCLUDE:
DATE OF MANUFACTURE, EXPIRATION, OR RETEST DATE
CONTRACT NUMBER/LOT NUMBER.
..
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6520-01-530-5578 Quantity: 6 PG Purchase Request: 7017680926QTY: 6 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339114
New
DIBBS
STOOL, DENTAL OPERATING
Solicitation # SPE2DH-26-T-5650
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
Federal
6520--Intraoral Scanner
Solicitation # 36C25726Q0683
The Department of Veterans Affairs, through its Network Contracting Office 17 in San Antonio, Texas, has issued a sources-sought notice for the acquisition of intraoral scanning systems and associated equipment to support the VA North Texas Health Care System in Dallas. This action is not a formal solicitation but a market research effort to gather industry input on the availability of CEREC PRIMESCAN AC TP STEEL(DI) units, software licenses, peripheral hardware including Primemill US systems, Speedfire Ovens, suction units, cleaning hoses, PrimePrint solutions, Nitrogen generators, InLab PCs, monitors, and one-time on-site training. The requirement is classified under NAICS code 339114 for Dental Equipment and Supplies Manufacturing, with a Product/Service Code of 6520, and all items are intended for delivery by October 15, 2026, to the Dallas VA Hospital at 4500 South Lancaster Road, with delivery terms specified as FOB Destination. The response deadline was set for August 17, 2026, at 11:00 AM Central Time, and all responses must be submitted via email to the Contract Specialist and Contracting Officer, with no formal proposals required beyond basic business information and socioeconomic representation. The notice does not include pricing, contract value estimates, or award terms, as it is solely for planning and market analysis purposes. No delivery schedule, payment terms, or detailed technical specifications are binding at this stage. However, if a formal contract follows, the procurement will incorporate standard FAR provisions including 52.212-4 and 52.212-5, with deviations such as 52.222-90 addressing DEI discrimination, 52.223-23 for sustainable products, 52.240-91 for security prohibitions, and VA-specific clauses related to delivery location, packing, and electronic invoicing through Tungsten Network, which is mandatory. Contractors must certify their small business status if asserting any socioeconomic preference, including HUBZone, 8(a), WOSB, EDWOSB, or service-disabled veteran-owned designations, and must maintain active SAM registration with a valid UEI. Deliveries must be coordinated with VA Logistics prior to arrival, during normal business hours, and must comply with labeling, waste removal, and safety protocols. Any work on-site requires adherence to construction site rules and
257-NETWORK Contract Office 17 (36C257)

POSTED

about 20 hours ago

DEADLINE

in 17 days
View Details
NAICS: 339114
New
Federal
6515--Electric Dental Handpieces (VA-26-00078050)
Solicitation # 36C24526Q0732
The Department of Veterans Affairs is soliciting quotes for the purchase of electric dental handpieces under a set-aside reserved exclusively for Service-Disabled Veteran-Owned Small Businesses (SDVOSB), with the solicitation number 36C24526Q0732 and NAICS code 339114, which has a small business size standard of 750 employees. The requirement is for eight ECTROmatic Premium Dual Electric Handpiece Systems with two KL 703 LED motors and sixty EXPERTmatic E20 L Low Speed Optic 1:1 Electric Attachments, all of which must be Kavo brand and fully compatible with existing dental delivery units. The equipment must meet strict technical specifications including variable speed ranges up to 200,000 RPM, adjustable torque control, LED or fiber optic illumination, internal water spray cooling, autoclavable components, low vibration, and low noise operation to ensure veteran comfort during procedures. The Statement of Work emphasizes use in restorative, prosthodontic, endodontic, and hygiene applications at the Huntington VAMC, with delivery required within 20 days of award and no later than 60 days after award. Responses must be submitted via email to Contract Specialist Tara Davis by 9:00 a.m. Eastern Time on August 14, 2026, and must include complete pricing schedules, technical literature proving product equivalence to the specified Kavo models, full company details including DUNS or SAM UEI, CAGE code, business size, manufacturer or distributor status, country of origin, and an authorized distributor letter certified by the OEM if applicable. All quotes must confirm acceptance of the solicitation’s terms and conditions without modification or clearly state any exceptions with rationale. Offerors are required to be registered in SAM.gov at the time of submission and must comply with Buy American requirements, FAR and VAAR clauses, and security and diversity compliance provisions. Award will be made using Simplified Acquisition Procedures under FAR 12, evaluating technical compliance, delivery capability, and price reasonableness. The contract will be firm fixed price and the performance location is the Huntington VAMC at 1540 Spring Valley Drive, Huntington, WV 25704.
245-NETWORK Contract Office 5 (36C245)

POSTED

about 20 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339114
New
Federal
6520--NOMAD Pro 2 Handheld X-ray System
Solicitation # 36C25626Q1154
The U.S. Department of Veterans Affairs, through Network Contracting Office 16, is conducting market research to assess industry interest and capability in providing the Nomad Pro 2 Handheld X-Ray System for use at the Michael E. DeBakey VA Medical Center in Houston, Texas. This initiative is a Sources Sought notice, not a solicitation, and is intended solely to gather information on contractor qualifications, compliance with federal regulations including the Buy American Act and Trade Agreements, Small Business status, and pricing estimates to inform future procurement decisions. Respondents must demonstrate their ability to meet all technical, logistical, and regulatory requirements outlined in the associated Draft Statement of Work, including delivery within 30 days of award, performance at the designated location, and provision of the system as a complete solution without requiring subcontracting unless clearly justified. All interested parties must respond by August 6, 2026, with comprehensive answers to nine specific questions covering capability, business size, Small Business certifications, OEM authorization, compliance with federal contracting vehicles such as GSA Schedules or VA NAC, and provision of contact details along with a Unique Entity ID. Responses must be submitted via email with a specified subject line and cannot be accepted by phone. The government explicitly states it is under no obligation to award a contract based on this RFI, will not compensate respondents for their submissions, and will use all information strictly for market research purposes. No solicitation currently exists, and any future procurement will be announced separately through official channels such as SAM.gov or GSA e-buy.
256-NETWORK Contract Office 16 (36C256)

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
BRUSH, BRISTLE, DENTAL H
Solicitation # SPE2DS-26-T-284M
The contract is for the procurement of one package of 12 dental handpiece bristle brushes designed for polishing around the necks of teeth and embrasures between teeth of plastic dentures, with specifications detailing a disk diameter of .719 to .781 inches and a stiff mandrel mount. The unit of issue is a package containing 12 brushes, and the total contract value is $11.30. Delivery is required within 20 calendar days of award, with FOB destination terms meaning the contractor bears all risk and responsibility until the goods reach the delivery point at FPO ZIP 09578. The solicitation number is SPE2DS-26-T-284M, issued on July 29, 2026, with proposals due by August 4, 2026, and submissions must be made electronically through the DIBBS portal. The procurement falls under NAICS code 339114, and the contracting office is the Department of Defense’s Medical Supply Chain MD SURG FSF. Compliance with stringent technical and quality requirements is mandated through incorporation of the DLA Master List of Technical and Quality Requirements, with revisions effective on the award date controlling. Packaging and labeling must adhere to RP001 DLA packaging standards and MIL-STD-129, including 2D Data Matrix barcodes, and must also meet ASTM D3951 commercial packaging standards where not superseded by DLA requirements. Hazardous material handling must comply with FED-STD-313 and the Hazard Communication Standard under 29 CFR 1910.1200, with specific labeling and documentation requirements. The contract includes clauses on employment eligibility verification, combating trafficking in persons, equal opportunity for workers with disabilities, sustainable product acquisition, and prohibition of hexavalent chromium and toxic material storage. Cybersecurity requirements under DFARS 252.204-7012 mandate protection of covered defense information and reporting of cyber incidents. Payment must be submitted electronically via WAWF, and all contractors must have a valid UEI and CAGE code registered in SAM. The government performs all inspection and acceptance at the delivery point, and small business status representations are required under FAR 52.219-28, with Alternate I applied. The procurement is conducted under simplified acquisition procedures and is likely awarded on a lowest price technically acceptable basis.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 339114
New
DIBBS
GUTTA PERCHA POINTS, EN
Solicitation # SPE2DH-26-T-5643
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 339114
New
DIBBS
BUR, DENTAL SURGERY
Solicitation # SPE2DH-26-T-5626
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 339114
New
DIBBS
POINT, ENDODONTIC
Solicitation # SPE2DH-26-T-5614
Absorbent paper points for endodontic use, fine grade, are supplied in a cell package containing 40 cells of 5 points each, with a total of 200 points per package, designated as the unit of issue. This item is subject to strict technical and quality requirements as outlined in the DLA Master List of Technical and Quality Requirements, and must comply with DLA packaging standards. The item carries a non-extendable shelf life of 48 months, with no more than seven months permitted to have elapsed from the date of manufacture to the date of delivery to the government. All packaging must clearly label the date of manufacture, expiration or retest date, and the contract or lot number in accordance with the latest revision of MMS1A. Government identification must be removed from any non-accepted supplies. Bidders must clearly specify the source and part number being offered. The item is identified by NSN 6520-00-904-1978 and is being procured under solicitation SPE2DH-26-T-5614 with a response deadline of August 5, 2026. Delivery is required within 20 days after award, and the place of performance is APO, with the procurement managed by the Department of Defense's Medical Supply Chain FSH.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
Supply of Filler, Dent, Metal S (NSN 8030009262133)The contract entails the supply and delivery of 4,000 kilotons of specialized metal filler material designated as Filler Dent Metal S with the NSN 8030009262133, intended for repair or fabrication purposes within defense-related operations. The material must comply with federal logistics standards to ensure operational readiness and compatibility with existing military systems. Issued as a subcontract under the Department of Defense, this procurement is managed by the Defense Logistics Agency and falls under the NAICS code 339114, indicating it pertains to other miscellaneous plastic product manufacturing, though the nature of the material suggests metallurgical specifications outside standard plastic categories. The solicitation was posted on July 28, 2026, and performance is expected to meet stringent defense supply chain requirements, though specific delivery locations and point of contact information are not provided. The contract can be referenced through the DIBBS system using the provided UI link to access award details and tracking.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

N/A
View Details
NAICS: 339114
New
DIBBS
Gutta Percha Points Supply – Endodontic ConsumablesThe contract seeks the supply and delivery of sterile, conform-fit gutta percha points specifically designed for endodontic procedures, encompassing full lifecycle responsibilities from manufacturing through packaging, labeling, and shipping. All items must comply with stringent federal and defense logistics standards to ensure consistent quality, traceability, and readiness for military medical use. The contractor is expected to meet exacting specifications for sterility, dimensional precision, and material integrity to support clinical effectiveness in field and base medical facilities. The solicitation is classified as a subcontract under NAICS code 339114, with a response deadline of August 4, 2026, and a posted date of July 28, 2026. The place of performance is identified as Suffolk, Virginia, with a zip code of 23435-5000, indicating logistics and distribution coordination centered within the Department of Defense’s medical supply chain infrastructure. Although no set-aside designation is specified, the procurement is managed by the Medical Supply Chain FSH under the Department of Defense, emphasizing its critical role in sustaining dental readiness for service members. All deliverables must align with defense procurement protocols to ensure seamless integration into military healthcare supply systems.
MEDICAL SUPPLY CHAIIN FSH

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 339114
New
DIBBS
Medical Supply Manufacturing & PackagingThe contract requires the manufacture, packaging, and preparation of medical supplies in sealed, protective containers compliant with both FDA regulations and military standards, ensuring the highest levels of sterility, safety, and durability for operational use. All work must be performed to meet exacting specifications for packaging integrity, labeling, and documentation to support deployment in austere environments, with the primary place of performance identified as APO 09094-3219. The solicitation is classified as a subcontract under NAICS code 339114, and is managed by the Department of Defense through the Medical Supply Chain FSH. Responses must be submitted by August 4, 2026, with the opportunity posted on July 28, 2026, and no set-aside provisions are specified, indicating open competition among qualified subcontractors.
MEDICAL SUPPLY CHAIIN FSH

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 339114
New
DIBBS
CALCIUM HYDROXIDE PAST
Solicitation # SPE2DH-26-T-5584
Calcium Hydroxide Paste, Dental, supplied in 1.2 mL syringes as part of the Ultracal XS Kit, is a radiopaque, high-pH (12.5) antibacterial agent used for endodontic treatment dressings. Each kit contains four syringes and twenty assorted 29-gauge Navitip tips, five of each length, and must be stored at room temperature due to the corrosive nature of the material. The item is identified by NSN 6520-01-686-3975 and is procured in a quantity of six kits under solicitation SPE2DH-26-T-5584, with delivery required within five days of award to the destination: PCU JOHN F KENNEDY CVN-79, Suffolk, VA 23435-5000. The item has a non-extendable shelf life of 24 months as defined by RS016, and its packaging must comply with hazardous materials regulations including 49 CFR, ICAO Technical Instructions, and MIL-STD-147 for palletization, along with specific preservation and marking standards per Medical Marking Standard No. 1 and MIL-STD-2073-1E. Each shipment must include an up-to-date Safety Data Sheet submitted to DLA.MSDS@DLA.MIL and physically attached to the package, with all containers labeled per hazard communication standards and bearing proper hazardous material warnings. The contract mandates full compliance with DLA packaging requirements, NIST SP 800-171 cybersecurity controls, and the use of U.S.-flag vessels for ocean transport, with detailed reporting obligations including vessel name, freight cost, and shipment documentation submitted within 30 days. Invoicing is exclusively through WAWF using DD Form 1155, and all personnel must undergo employment eligibility verification while adhering to anti-trafficking policies. Inspection and acceptance occur at the destination under FAR 52.246-2, and the contractor is required to notify the contracting officer immediately of any potential safety issues. The solicitation requires electronic submission via DIBBS by August 4, 2026, with the contracting officer reserving the right to adjust terms under applicable FAR and DFARS clauses including those related to contract type, changes, subcontracting, and payment.
MEDICAL SUPPLY CHAIIN FSH

POSTED

3 days ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 339113
New
DIBBS
CONTAINER, THERMAL, BLOO
Solicitation # SPE2DH-26-T-5662
Surgical Appliance and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
HYPOTHERMIA, CASUALT
Solicitation # SPE2DH-26-T-5678
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 325998
New
DIBBS
WATER SAMPLING TEST
Solicitation # SPE2DH-26-T-5651
All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 314910
New
DIBBS
PANEL, MODULAR, MEDIC
Solicitation # SPE2DH-26-T-5649
Textile Bag and Canvas Mills

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333248
New
DIBBS
SCOOP, LABORATORY
Solicitation # SPE2DH-26-T-5667
All Other Industrial Machinery Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
BAG, SPECIMEN
Solicitation # SPE2DH-26-T-5671
Surgical Appliance and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
DETERGENT, GLASSWARE AN
Solicitation # SPE2DH-26-T-5675
Surgical Appliance and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 326199
New
DIBBS
POUCH, LIQUID ABSORBENT
Solicitation # SPE2DH-26-T-5676
The contract is for the procurement of pouches designed to absorb liquid spills including urine, blood, and other biohazardous fluids. Each package contains 1,000 units, and the total quantity requested is two packages. The item is identified by NSN 6530-01-307-7434 and is part of purchase request 7017682449 with a delivery requirement of 20 days after order award. The solicitation number is SPE2DH-26-T-5676, with a response deadline of August 6, 2026, and a posted date of July 30, 2026. Suppliers must specify the source and part number being offered, and the product must meet all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. The procuring agency is the Medical Supply Chain FSH under the Department of Defense, with performance location in San Diego, California, and the primary point of contact is Tina Vu, reachable via email and phone provided.
All Other Plastics Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
BRUSH-SPONGE, SURGIC
Solicitation # SPE2DH-26-T-5646
The product is a disposable surgical scrub brush-sponge designed for preoperative skin preparation, featuring non-irrigating bristles mounted on a foam sponge backing impregnated with 4% chlorhexidine gluconate solution for antimicrobial efficacy. It includes an integrated disposable plastic nail cleaner and is packaged in quantities of 25 per unit, with the order requiring two packages. This item is designated for military use only and is not procurable through standard commercial channels; users must instead procure the alternate NSN 6530-01-211-4810. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specifications controlled by the revision in effect on the solicitation or award date depending on the acquisition scale. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. Covered defense information provisions apply, and performance is required at Fort Hood, Texas, with delivery expected within five days after award. The solicitation number is SPE2DH-26-T-5646, posted on July 30, 2026, with responses due by August 6, 2026, and is managed by the Department of Defense’s Medical Supply Chain FSH through point of contact Tina Vu.
Surgical Appliance and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
PAD, HEATING, CHEMICAL
Solicitation # SPE2DH-26-T-5654
Surgical Appliance and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
GEL, TRANSMISSION, ULTRA
Solicitation # SPE2DH-26-T-5644
Surgical Appliance and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
BAND, EXERCISE, PHYSICAL
Solicitation # SPE2DH-26-T-5647
Surgical Appliance and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details