Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Exterior Siding Installation

Active

State & Local

Response Deadline12/03/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Exterior Siding Installation involves the removal of old siding and the installation of new panels, trim, and weather-resistive barriers for Housing Units A, B, and C at a Massachusetts Department of Correction facility in Bridgewater. The primary objective is to improve the building envelope, and the selected contractor will perform these services for prime contractors. All personnel assigned to the project must have completed a 10-hour OSHA-approved construction safety course. The solicitation was posted on October 26, 2026, with a response deadline of December 3, 2026. The work falls under NAICS code 238170.

General Info

Exterior siding installation for Massachusetts Department of Correction housing units in Bridgewater.

Agency

Massachusetts → Department of Correction

NAICS

238170 - Siding Contractors

Place of Performance

Administration Road Bridgewater, MA, 02324, USA

Set-Aside

NONE

Documents

This scope was carved out of BD-27-1025-DOCFS-9832-134842.

The full solicitation package (10 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

DRM 2026-20 Housing Units A, B and C Roof Replacement at BSH

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 26

subcontract

Response DeadlineDec 3

Submission deadline

Response Deadline

12/03/2026, 07:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyMassachusetts → Department of Correction

ContactsNo contacts available

OfficeN/A

Organization / AgencyMassachusetts → Department of Correction

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs installation and replacement of exterior siding for prime contractors on Massachusetts Department of Correction facility projects. Removes old siding and installs new siding panels, trim, and weather-resistive barriers to improve the building envelope of Housing Units A, B, and C. Requires 10-hour OSHA-approved construction safety course for all personnel. Delivers installed exterior siding.

Similar Contracts

Same NAICS industry code

Cashier Window Installation and GlazingThis subcontract for Cashier Window Installation and Glazing involves providing security and service window installations for prime contractors at Southeastern Technical College facility projects in Vidalia, Georgia. The scope of work includes the removal of existing window units, the installation of new security glass and frames, and the completion of all necessary sealing and caulking to deliver a fully operational cashier window system. The project falls under NAICS code 238170 and requires strict compliance with O.C.G.A. 13-10-91 regarding worker authorization. Interested parties must submit their responses by the deadline of December 2, 2026.

Southeastern Technical College

POSTED

about 15 hours ago

DEADLINE

in about 1 month

Metal Wall Panels and Weather BarriersThis subcontract agreement involves the supply and installation of metal wall panels and thermal protection for facility projects located in Orange County, Florida. The scope of work requires the contractor to install Metal Composite Material panels, cementitious wall panels, and weather barriers in strict accordance with Division 07 specifications to ensure a fully weather-tight exterior wall envelope. Managed by the Florida Administrative Services Procurement Division under NAICS code 238170, the opportunity was posted on October 27, 2026. Interested parties must submit their responses by the deadline of December 1, 2026.

Administrative Svcs., Procurement Division

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Window and Door InstallationThis subcontract for window and door installation involves working with prime contractors on Mississippi Department of Finance and Administration facility projects located at Broom Hall, Delta State University. The scope of work includes the removal of existing units and the installation of new window and door systems, which must be fully installed, sealed, and completed according to specifications provided by Burris/Wagnon Architects. Interested parties must be prequalified by the MS Bureau of Building, Grounds and Real Property Management to be eligible. The solicitation was posted on October 27, 2026, with a response deadline set for December 3, 2026. The project falls under NAICS code 238170.

MS DEPT FINANCE and ADMINISTRATION

POSTED

about 19 hours ago

DEADLINE

in about 1 month

Doors and Windows Replacement and InstallationThis subcontract agreement involves the supply and installation of doors, windows, and related components for residential property projects managed by the Ipswich Borough Council. The selected provider will work under prime contractors to deliver fully installed and sealed window frames, glazing, door sets, and hardware, adhering strictly to CPV 45421130 and 45421100 standards. All work must comply with current building safety regulations and energy efficiency requirements. The solicitation was posted on October 27, 2026, with a response deadline of November 25, 2026, at 11:00 AM. Classified under NAICS code 238170, the contract focuses on specialized installation services to enhance the residential housing stock within the council's jurisdiction.

Ipswich Borough Council

POSTED

about 21 hours ago

DEADLINE

ID-KOOSKIA NATIONAL FISH- GUTTER RPLCMNT

Solicitation # 140FF027Q0040

The US Fish and Wildlife Service is soliciting a firm-fixed-price construction contract for rain gutter replacement at the Kooskia National Fish Hatchery in Kooskia, Idaho. The project involves replacing gutters at four specific locations: the Fish Production Building, Mechanical Shop, Equipment and Vehicle Shop Building, and the Water Treatment Facility Building. This is a small business set-aside under NAICS code 238170, with a construction magnitude estimated between 15,000 and 20,000 dollars. The government intends to award the contract to the responsible respondent offering the lowest evaluated price that is determined to be fair and reasonable. Work is scheduled to begin upon award and must be completed by December 17, 2026. The contractor is required to provide new, high-grade materials and perform all work in a skillful and workmanlike manner, adhering to all federal, state, and municipal laws. Payment requests must be processed electronically via the Invoice Processing Platform, with final payments requiring a Contractor's Release of Claims. Administrative requirements include maintaining active registration in the System for Award Management and adhering to Davis-Bacon Act wage determinations for applicable personnel.

Fws Contracting Activity

POSTED

DEADLINE

Z--TX-CADDO LAKE NWR-VC SIDING REPAIR

Solicitation # 140FF027Q0012

Solicitation 140FF027Q0012 is a Firm Fixed Price construction project issued by the U.S. Fish and Wildlife Service for siding repairs at the Caddo Lake National Wildlife Refuge in Karnack, Texas. The scope of work involves the removal of damaged siding from the back of the visitor center trailer and the end of an auxiliary trailer, covering approximately 600 square feet. The contractor is required to install new color-matched siding, J-channel, underpinning, and trim for four outside corners, followed by a full site cleanup and magnetic sweep for debris. Because no formal drawings are provided, site visits are required for contractors to determine exact measurements and specifications. This is a 100% Total Small Business Set-Aside under NAICS code 238170, with an estimated contract value of less than 25,000 dollars. Award will be made to the responsible quoter offering the lowest price. Performance must commence within 10 calendar days of the Notice to Proceed and be completed within 60 calendar days, with an estimated performance window from November 30, 2026, to January 29, 2027. The contract is subject to the Davis-Bacon Act, requiring adherence to prevailing wage rates for Harrison County, Texas. Prospective bidders must have an active SAM registration and submit their price proposals via email to the contract specialist by November 6, 2026, at 5:00 PM EST. The government will evaluate submissions based on SAM registration, compliance with solicitation requirements, and price reasonableness. Once awarded, the contractor must provide material submittals to the Contracting Officer Representative and submit certified payrolls with invoices to the USFWS Denver Operation Office for payment via electronic funds transfer.

Fws Contracting Activity

POSTED

DEADLINE

Metal PanelsThis subcontract opportunity is for the supply and installation of architectural or structural metal wall and roof panels for facility projects benefiting Atherton Community Schools in Burton, Michigan. The selected contractor will be responsible for delivering and installing metal cladding and panels while working under a prime contractor. The solicitation was posted on October 27, 2026, with a response deadline of November 17, 2026. This project falls under NAICS code 238170 and is managed through the state of Michigan's procurement system.

Atherton Community Schools

POSTED

DEADLINE

Window Installation and Removal ContractorThis subcontract opportunity is for a window installation and removal contractor to support prime contractors on USDA Forest Service facility projects located in Eddyville, Illinois. The scope of work involves the structural removal of 19 existing windows and the subsequent fitting, insulation, and sealing of new units to ensure a weather-tight finish. The contractor is also responsible for the offsite disposal of all project debris. The project is designated as a total Small Business Set Aside under NAICS code 238170. All work must be performed in compliance with Service Contract Labor Standards and FAR 52.246-21. The final deliverable for this contract is the successful installation and sealing of 19 windows.

Csa East 6 Usda-Fs

POSTED

DEADLINE

Glass and GlazingThis subcontract opportunity is for the installation of windows, storefronts, and glass partitions for community center projects managed by the City of Boston Public Facilities Department. The selected contractor will work under prime contractors to perform the fitting and installation of glass panels, frames, and glazing systems. To be eligible for this work, contractors must possess a DCAMM Certificate of Eligibility specifically for Glass and Glazing. The project is categorized under NAICS code 238170 and will be performed in Boston, Massachusetts. Interested parties must submit their responses by the deadline of November 17, 2026. This contract focuses on the delivery and professional installation of complete glazing systems within public facility environments.

PFD01 - Public Facilities Department

POSTED

DEADLINE

Window InstallationThis subcontract agreement involves the supply and installation of residential windows for prime contractors working on facility projects for the Choctaw Nation Housing Authority. The scope of work requires the contractor to replace windows as specified in the project bid form and ensure the final delivery of fully installed units. The project is located in Poteau, Oklahoma, and falls under NAICS code 238170. Interested parties must submit their responses by the deadline of November 2, 2026, following the posting date of October 26, 2026.

Choctaw Nation Housing Authority

POSTED

DEADLINE

Roof Hatches, Skylights, and WindowsThis subcontract opportunity with the Columbia School District involves the supply and installation of roof hatches, unit skylights, and roof windows. The selected contractor will work under prime contractors to deliver fully installed and flashed roof openings, which includes the installation of frames, integral curbs, and counter flashing utilizing metal-framed systems. The project is categorized under NAICS code 238170. Interested parties must submit their responses by the deadline of November 17, 2026. Further details and submission guidelines can be accessed through the Michigan SIGMA portal.

Columbia School District

POSTED

DEADLINE

Sheet Metal Flashing, Gutters, and DownspoutsThis subcontract agreement involves the supply and installation of sheet metal flashing, gutters, and drainage trim for prime contractors working on Columbia School District projects in Michigan. The scope of work includes the installation of base flashings, metal cap flashing, expansion joints, counter flashing gravel stops, fascia, scuppers, gutters, and downspouts. All work must be performed in accordance with the SMACNA Architectural Sheet Metal Manual, culminating in the delivery of a completed flashing and gutter system. The opportunity is categorized under NAICS code 238170 and was posted on October 26, 2026. Interested parties must submit their responses by the deadline of November 17, 2026.

Columbia School District

POSTED

DEADLINE

More opportunities from Massachusetts → Department of Correction

Same awarding agency

General Building Construction SupportThis subcontract for General Building Construction Support involves performing general construction and structural repairs for prime contractors at Massachusetts Department of Correction facilities located in Bridgewater. The scope of work focuses on general carpentry, structural reinforcement of roof decking, and the installation of perimeter support utilizing structural steel and framing lumber to ensure the stability of new roofing elements. All personnel assigned to the project must complete a 10-hour OSHA-approved construction safety course to comply with site requirements. Interested parties should note that the response deadline for this opportunity is December 3, 2026.

Commercial and Institutional Building Construction

POSTED

DEADLINE

in about 1 month

Sheet Metal & Flashing ServicesThis subcontract for Sheet Metal and Flashing Services involves the fabrication and installation of custom sheet metal components for prime contractors working on Massachusetts Department of Correction facility projects in Bridgewater. The scope of work focuses on ensuring watertight integrity through the delivery and installation of flashing, edge metal, coping, and comprehensive drainage systems, including gutters and downspouts. All personnel assigned to the project must complete a 10-hour OSHA-approved construction safety course to comply with site requirements. The solicitation was posted on October 26, 2026, with a response deadline set for December 3, 2026.

Sheet Metal Work Manufacturing

POSTED

DEADLINE

in about 1 month

Commercial Roofing InstallationThis commercial roofing installation subcontract involves the full replacement of roofing systems at the Massachusetts Department of Correction facility located at Bridgewater State Hospital. The scope of work includes the removal of existing materials and the installation of new roofing systems utilizing commercial membranes, insulation, and adhesives in strict accordance with DCAMM standards. The final deliverable is a fully installed and warranted roofing system. To qualify for this project, all personnel must hold DCAMM roofing certification and have completed a 10-hour OSHA-approved construction safety course. The solicitation was posted on October 26, 2026, with a response deadline of December 3, 2026. This project falls under NAICS code 238160 and is managed through the Massachusetts Department of Correction.

Roofing Contractors

POSTED

DEADLINE

in about 1 month

DRM 2026-20 Housing Units A, B and C Roof Replacement at BSH

Solicitation # BD-27-1025-DOCFS-9832-134842

The Massachusetts Department of Correction is soliciting bids for the roof replacement of Housing Units A, B, and C at Bridgewater State Hospital, located at 20 Administration Road, Bridgewater, MA. This project, estimated at $1,179,895.00, encompasses roofing, siding, and sheet metal services as well as general building construction. To be eligible, contractors must be DCAMM certified in roofing. The contract will be awarded to the lowest responsible and eligible bidder based on the sum of the base bid and accepted alternates. Key deadlines include the availability of plans and specs on October 22, 2026, bid intent forms due by November 10, 2026, and a final question deadline of November 19, 2026. General bids must be submitted by December 3, 2026, at 2:00 PM to the Department of Correction in Milford, MA. Bidders must provide a bid deposit, certificates of insurance, and a DCAMM Certificate of Eligibility. The project mandates a combined MBE/WBE participation goal of 13% and a SDVOBE benchmark of 3%. Additionally, all employees must have completed a 10-hour OSHA-approved construction safety course, and the project is subject to annual prevailing wage updates. Work must commence within 10 days of the Notice to Proceed, with a progress schedule submitted shortly thereafter.

POSTED

DEADLINE

in about 1 month

ISS Genuine Parts and Component SupplierThe ISS Genuine Parts and Component Supplier subcontract supports prime contractors on projects for the Massachusetts Department of Correction within the Executive Office of Public Safety and Security. The scope of work involves the procurement and delivery of genuine, lawfully sourced, and traceable replacement components, including CCTV hardware, door controllers, intercoms, and alarm sensors that are compatible with existing manufacturers. Additionally, the supplier is responsible for managing the custody and replenishment of critical spares, providing necessary material cost documentation, and ensuring all hardware is backed by appropriate warranties. This opportunity is categorized under NAICS code 423430 and is centered in Milford, Massachusetts. Interested parties must adhere to the timeline established by the posting date of October 22, 2026, with a final response deadline of January 8, 2027. The contract emphasizes strict traceability and documentation for all delivered hardware to ensure security and compliance standards are met for the Department of Correction.

Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

DEADLINE

Integrated Security System (ISS) Maintenance and Engineering ServicesThe Integrated Security System (ISS) Maintenance and Engineering Services subcontract involves providing technical maintenance, troubleshooting, and engineering support for prime contractors on projects for the Massachusetts Department of Correction. The scope of work includes managing system access, PLC programming, and source code for critical infrastructure such as CCTV, door-control logic, and alarm systems. The contractor is responsible for executing work orders for material changes and delivering detailed service reports to ensure consistent system functionality. Due to the nature of the work, the contractor must be capable of handling security-sensitive ISS information. The project is based in Milford, Massachusetts, and falls under NAICS code 541330. Interested parties should note the response deadline of January 8, 2027.

Engineering Services

POSTED

DEADLINE

27-DOC-1000-ISS

Solicitation # BD-27-1025-DOCCF-1043-134584

The Massachusetts Department of Correction is seeking a contractor to provide authorized maintenance, diagnosis, corrective repair, preventive maintenance, and technical support for the existing Integrated Security System (ISS) and its interfaces at the Souza Baranowski Correctional Center in Milford. The scope of work covers a wide array of technology, including DELL ESXI Servers, GE and Emerson PLC, DeTekion Security Systems, Senstar personnel alarms, BOSCH CCTV, Dukane Intercoms, Juniper network switches, and TRIPP LITE UPS systems. This is a rate-based fee-for-service blanket contract with an estimated annual value of 75,000 dollars and a maximum duration of six years, consisting of an initial two-year term and four optional one-year renewals. The contract specifically excludes the design, procurement, installation, or commissioning of any replacement ISS or facility-wide modernization. The solicitation is designated as a Small Business Purchasing Program (SBPP) set-aside, giving preference to Massachusetts-based businesses with 50 or fewer employees and gross revenues of 15 million dollars or less. Award decisions are based on a best-value evaluation, requiring a minimum threshold of 100 out of 160 base points. Key deliverables include a baseline condition report due within 15 calendar days of the effective date and a preventive maintenance and recovery plan due within 30 calendar days. Contractors must adhere to a one-hour arrival requirement for dispatch and ensure all personnel pass rigorous security and background clearances. Payment is processed via the Commonwealth Electronic Funds Transfer (EFT) program, and bidders are encouraged to implement sustainable packaging practices to earn additional evaluation points.

POSTED

DEADLINE

Woodworking Supplies & ConsumablesThis subcontract focuses on the provision of general woodworking consumables for prime contractors operating on Massachusetts Department of Correction projects, specifically located in Milford. The scope of work includes the supply of commercial grade adhesives, fasteners, sandpaper, and various related shop supplies. To ensure compliance and safety, the contractor is required to provide Safety Data Sheets for all chemical products as mandated by law. Procurement for these materials is handled through a quote-based system. The solicitation was posted on October 9, 2026, with a response deadline set for December 7, 2026. This opportunity falls under NAICS code 423840 and is managed by the Massachusetts Department of Correction.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

in about 1 month

Wood Finishing & Restoration ServicesThis subcontract for Wood Finishing and Restoration Services involves providing specialized finishing and restoration work for prime contractors on Massachusetts Department of Correction projects, specifically located in Milford. The scope of work includes applying commercial wood finishes and stains, restoring existing woodwork, and delivering technical training for equipment use along with the necessary certifications. The contractor must adhere to strict environmental specifications and provide all required Safety Data Sheets. Interested parties should note the response deadline of December 7, 2026, for this project categorized under NAICS code 238390.

Other Building Finishing Contractors

POSTED

DEADLINE

in about 1 month

Woodshop Maintenance & Technical ServicesThe Woodshop Maintenance and Technical Services subcontract involves providing specialized maintenance for woodworking equipment on behalf of prime contractors for the Massachusetts Department of Correction. The scope of work focuses on the upkeep of industrial dust collection and ventilation systems, the execution of tool maintenance contracts, and the procurement of necessary replacement parts. To ensure quality and safety, all services must be performed by manufacturer-authorized service providers, with final deliverables including detailed maintenance logs and fully operational ventilation systems. This opportunity is categorized under NAICS code 811310 and is centered in Milford, Massachusetts. Interested parties must submit their responses by the deadline of December 7, 2026. The contract is managed through the Massachusetts Department of Correction and requires strict adherence to technical specifications to maintain the functionality of the facility's industrial woodshop equipment.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

in about 1 month

Woodworking Equipment & Tool SupplyThis subcontract focuses on the supply and installation of industrial woodworking machinery and tools for prime contractors working on Massachusetts Department of Correction projects, specifically located in Milford. The scope of work includes providing a wide range of equipment for cutting, shaping, joining, and edge banding, with a specific emphasis on automated machinery, CNC systems, and integrated CAD/CAM software. To ensure operational quality, the contract requires that all equipment be backed by manufacturer authorizations and installed by qualified technicians. The response deadline for this opportunity is December 7, 2026, and it falls under NAICS code 423830.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

in about 1 month

Raw Wood & Engineered Lumber SupplyThis subcontract agreement focuses on the supply of high-grade commercial raw wood and engineered lumber for prime contractors working on Massachusetts Department of Correction projects, specifically located in Milford. The scope of work includes the provision of hardwoods such as Oak, Maple, Walnut, and Cherry, as well as softwoods and engineered products including Plywood, MDF, and Particleboard. The supplier is responsible for verifying wood moisture content, adhering to specific grading rules for various species, and providing all necessary compliance documentation upon delivery. The opportunity was posted on October 9, 2026, with a response deadline of December 7, 2026. Operating under NAICS code 423310, the contract ensures that all raw lumber and engineered wood panels meet the rigorous standards required for state correctional facility infrastructure.

Lumber, Plywood, Millwork, and Wood Panel Merchant Wholesalers

POSTED

DEADLINE

in about 1 month

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS