Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

General Building Construction Support

Active

State & Local

Response Deadline12/03/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for General Building Construction Support involves performing general construction and structural repairs for prime contractors at Massachusetts Department of Correction facilities located in Bridgewater. The scope of work focuses on general carpentry, structural reinforcement of roof decking, and the installation of perimeter support utilizing structural steel and framing lumber to ensure the stability of new roofing elements. All personnel assigned to the project must complete a 10-hour OSHA-approved construction safety course to comply with site requirements. Interested parties should note that the response deadline for this opportunity is December 3, 2026.

General Info

General construction and structural repairs for Massachusetts Department of Correction facilities by December 2026.

Agency

Massachusetts → Department of Correction

NAICS

236220 - Commercial and Institutional Building Construction

Place of Performance

Administration Road Bridgewater, MA, 02324, USA

Set-Aside

NONE

Documents

This scope was carved out of BD-27-1025-DOCFS-9832-134842.

The full solicitation package (10 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

DRM 2026-20 Housing Units A, B and C Roof Replacement at BSH

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 26

subcontract

Response DeadlineDec 3

Submission deadline

Response Deadline

12/03/2026, 07:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyMassachusetts → Department of Correction

ContactsNo contacts available

OfficeN/A

Organization / AgencyMassachusetts → Department of Correction

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs general construction and structural repairs for prime contractors on Massachusetts Department of Correction facility projects. Executes general carpentry, structural reinforcement of roof decking, and perimeter support using framing lumber and structural steel. Requires 10-hour OSHA-approved construction safety course for all personnel. Delivers repaired or reinforced structural elements supporting the new roof.

Similar Contracts

Same NAICS industry code

You are hereby invited to submit a sealed bid for MGCCC - Athletic Performance Addition located at the Perkinston Campus of Mississippi Gulf Coast Community College, Perkinston, Mississippi. Bids will be received from contractors at the Maintenance, T

Solicitation # 3170036832

Solicitation number 3170036832 is an invitation for sealed bids to complete the Athletic Performance Addition at the Perkinston Campus of Mississippi Gulf Coast Community College in Perkinston, Mississippi. The project is managed by the MS Development Authority for the Board of Trustees of the college. Contractors must submit single stipulated sum bids for all work required by the contract documents, including drawings and specifications. Bids are due by 2:30 P.M. on Thursday, October 29, 2026, and can be submitted physically at the Maintenance, Transportation and Technology Services Center or electronically via the designated portal. The award process emphasizes responsiveness and responsibility, requiring bidders to provide security in the specified amount and form. Successful bidders must provide performance and payment bonds. Compliance with Mississippi state laws is mandatory, specifically regarding the Certificate of Responsibility. Resident contractors are granted preference over non-residents, and non-resident bidders must provide a copy of their own state's laws regarding the treatment of non-resident contractors. Bids remain valid for sixty days following the opening date, and inquiries should be directed to Heather Wantland.

POSTED

DEADLINE

in about 24 hours

Construction of the Recharge Master Plan Update Basin Improvements Project Montclair Basin Improvements

Solicitation # construction-recharge-master-plan-update-basin-improvements-project-montclair-basin-improvements-2

The Construction of the Recharge Master Plan Update Basin Improvements Project Montclair Basin Improvements is a solicitation issued by RT Contractor Corp for the Inland Empire Utilities Agency. This project, located in California with a specific focus on Riverside and Los Angeles as the project areas, is designated as a set-aside for Disadvantaged Business Enterprises (DBE) under the Department of Transportation. The solicitation was posted on October 28, 2026, with a response deadline of November 4, 2026. To ensure project financing and bid responsiveness, contractors must strictly adhere to Disadvantaged Business Enterprise Good Faith Effort (GFE) requirements. Mandatory submissions with the bid package include proof of online solicitation postings for 30 consecutive calendar days, a one-day print newspaper advertisement, and evidence of utilizing the Small Business Administration and the Minority Business Development Agency. While outreach documentation such as call logs and emails may be submitted up to three business days after the closing date, failure to provide the primary GFE proofs by the opening date will result in the bid being deemed non-responsive.

RT CONTRACTOR CORP

POSTED

about 2 hours ago

DEADLINE

Cape Cod Space Force Microgrid Power Station - Bourne, MA

Solicitation # cape-cod-space-force-microgrid-power-station-bourne-ma

J&J Contractors, Inc. is soliciting bids for the Cape Cod Space Force Microgrid Power Station project located in Bourne, Massachusetts. This comprehensive construction effort encompasses a wide range of trades, including sitework, masonry, structural steel, miscellaneous metals, metal paneling and siding, roofing, drywall, flooring, painting, fire protection, plumbing, mechanical, and electrical work. The project is designated as an SBA set-aside, making it available to various small business categories, including SDB, WOSB, HUBZone, and VOSB certifications. Interested parties must adhere to Davis Bacon Wage Rates, and the project is exempt from sales tax. The response deadline is October 30, 2026. To receive a formal bid invitation through Building Connected, applicants should contact Rahul Maheshwari directly via email.

J&J CONTRACTORS, INC.

POSTED

about 2 hours ago

DEADLINE

Weapons Magazine

Solicitation # weapons-magazine

The Weapons Magazine solicitation, issued by Sauer Construction, focuses on comprehensive site development and foundational infrastructure in Virginia. The scope of work encompasses critical electrical and structural elements, including primary and secondary electrical systems, grounding, and lighting protection. Additionally, the project requires extensive site work involving rigid inclusions, piling foundations, and the construction of access roads. This opportunity is designated as a small business set-aside, welcoming applications from various certified entities including Small Disadvantaged, Women-Owned, HUBZone, and Veteran-Owned Small Businesses. Interested parties must submit their responses by November 15, 2026. The project falls under NAICS code 236220, and primary coordination is managed through David Phillips.

Sauer Construction

POSTED

about 2 hours ago

DEADLINE

AMC-0194 GPT ATCT Public Announcement

Solicitation # amc-0194-gpt-atct-public-announcement

This solicitation, issued by PTSI Managed Services Inc. (Parsons) for work in Mississippi, involves a comprehensive facility renovation project with an estimated construction value between 500,000 and 1,000,000 dollars. The scope of work is multidisciplinary, encompassing electrical corrections for grounding and lighting, mechanical repairs to copper piping and chilled water systems, and civil reinforcements including gate and foundation repairs. Additionally, the project requires structural maintenance such as epoxy injection and painting, as well as architectural upgrades involving flooring, window sealing, and gutter installation. The opportunity is designated as a small business set-aside, open to various certified categories including SDB, WOSB, HUBZone, and VOSB entities. Interested parties must submit their responses by November 18, 2026. The project falls under NAICS code 236220 and is managed by primary point of contact Kurtis Kinard.

PTSI Managed Services Inc. (Parsons)

POSTED

about 2 hours ago

DEADLINE

P084 NEXT GENERATION TORPEDO INTEGRATION LAB & P1016 Consolidated RDT&E Systems Facility – Newport, RI

Solicitation # p084-next-generation-torpedo-integration-lab-p1016-consolidated-rdte-systems-facility-newport-ri

J&J Contractors, Inc. is soliciting bids for the construction of the Next Generation Torpedo Integration Lab and the P1016 Consolidated RDT&E Systems Facility in Newport, Rhode Island. The primary project involves a 12,920 square foot multi-story steel frame laboratory and office facility featuring a shallow foundation, metal standing seam roof, and masonry and metal panel exterior walls. This scope encompasses comprehensive site preparations, including landscaping, parking, exterior lighting, telecommunications, and the installation of underground stormwater retention and utility systems. An additional option for the P1016 facility includes a 17,978 square foot laboratory with similar structural specifications and the demolition of Building 1272T, a 548 square meter engineering facility. The solicitation is open to various small business designations, including SDB, WOSB, HUBZone, and VOSB. Pricing is requested across a wide array of trades, including demolition, abatement, structural steel, mechanical, electrical, plumbing, and fire protection, among others. All work must adhere to Davis Bacon Wage Rates and is exempt from sales tax. Interested parties must contact the primary point of contact to receive bid documents via Building Connected before the response deadline of November 30, 2026.

J&J CONTRACTORS, INC.

POSTED

about 2 hours ago

DEADLINE

in about 1 month

ILLINOIS STATE UNIVERSITY SOUTH CAMPUS HOUSING & DINING

Solicitation # illinois-state-university-south-campus-housing-dining

This solicitation is for the Illinois State University South Campus Housing and Dining project, managed by River City Construction, LLC. The project is categorized under NAICS code 236220 and will be performed in the state of Illinois. Interested parties must submit their responses by the deadline of October 29, 2026. The opportunity is designated as an SBA set-aside, making it available to various small business categories, including Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone Small Businesses. For further inquiries or submission details, the primary point of contact is Justin Beaty, who can be reached via email at [email hidden] or by phone at [phone hidden].

River City Construction, LLC

POSTED

about 2 hours ago

DEADLINE

in about 6 hours

CAPITAL DEVELOPMENT BOARD - CONSTRUCT NEW REST AREA, FORT MASSAC REST AREA

Solicitation # capital-development-board-construct-new-rest-area-fort-massac-rest-area

The Capital Development Board is seeking proposals for the construction of the new Fort Massac Rest Area located in Illinois. This solicitation is specifically set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. The project falls under NAICS code 236220, focusing on commercial and institutional building construction. Interested parties must submit their responses by the deadline of November 18, 2026, at 11:00 AM. The primary point of contact for this opportunity is Brock Bursott at River City Construction, LLC. Detailed information and submission guidelines can be accessed through the provided SBA portal link.

River City Construction, LLC

POSTED

about 2 hours ago

DEADLINE

Water Damage Restoration

Solicitation # G26-005

Solicitation G26-005 is a request for a single lump sum contract to perform multi-floor water damage restoration in Building 17 at the Grafton Job Corps Center in North Grafton, Massachusetts. The project follows a fire sprinkler discharge that impacted the first, second, and third floors, including dormitory rooms, offices, and medical areas. The scope of work involves architectural repairs such as drywall replacement, painting, ceiling tile and flooring installation, rubber wall base installation, and electrical and plumbing repairs to restore the facility to its original condition. The total period of performance is 105 days, with substantial completion required within 90 days and final completion within an additional 15 days. This is an SBA set-aside opportunity open to small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. Award will be based on best value, with evaluation weights assigned to price (60), quality (20), past performance (10), and schedule (10). Prospective bidders must attend a mandatory site visit on November 3, 2026, and submit proposals by November 17, 2026. Required documentation includes a detailed cost breakdown, a timeline for completion, a 90-day bid guarantee, a valid Massachusetts Contractor's License, and wage rate certifications. The contract is subject to the Davis-Bacon Act, requiring a minimum wage of 13.65 per hour and specific paid sick leave provisions. Contractors must comply with NFPA-101 Life Safety Code, OSHA, EPA, and ADA regulations, and provide proof of automobile liability insurance naming Adams and Associates, Inc. as an additional insured. Deliverables include a sequenced construction schedule due within 14 days of the Notice to Proceed. The project includes a one-year guarantee of workmanship and a specific 20-year product warranty for LVP flooring. Payment terms are Net 30.

Grafton Job Corps

POSTED

about 2 hours ago

DEADLINE

Solicitation # sof-armory

Sauer Construction is seeking bids for the SOF Armory project located in North Carolina. This solicitation is open to all construction trades under NAICS code 236220. Interested parties must submit their responses by the deadline of November 30, 2026. This opportunity is designated as an SBA set-aside, making it available to various small business categories, including Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone Small Businesses. Primary inquiries and coordination should be directed to Adam Houck via the provided contact email.

SAUER CONSTRUCTION

POSTED

about 2 hours ago

DEADLINE

in about 1 month

Springdale JCC –Dormitory Interior Renovation & Repairs

Solicitation # springdale-jcc-dormitory-interior-renovation-repairs

Career Systems Development Corporation, operating for the U.S. Department of Labor, is soliciting proposals for the interior renovation and repair of the North Wing dormitory at the Springdale Job Corps Center in Troutdale, Oregon. The project focuses on restoring water-damaged interior spaces to return them to safe residential use, specifically targeting sixteen residential rooms and bathrooms, common areas, and mechanical rooms. The scope of work includes the installation of drywall, joint finishing, and painting for approximately 300 square feet of floor area, as well as the temporary disconnection and re-installation of HVAC equipment, water heaters, and furnaces. This solicitation is set aside for small businesses, including certified Veteran, Service-Disabled Veteran, Women-Owned, and HUBZone small businesses. Proposing contractors must provide a detailed proposal including relevant experience, a safe work method description covering project phasing and occupied-building protection, and itemized pricing by room and trade. The project is subject to the Davis Bacon Act under wage determination OR20260100, requiring the submission of weekly certified payrolls. Awardees must provide payment and performance bonding for the full project value, along with general liability and worker's compensation insurance, within ten days of award. Key deliverables include a project schedule, safety plan, and a minimum one-year workmanship warranty upon final acceptance. Construction is scheduled to take place between February 1, 2024, and March 31, 2024.

Career Systems Development Corporation

POSTED

about 2 hours ago

DEADLINE

P1102 Weapons Magazine and Ordnance Operations Facility, Naval Submarine Base New London, Groton, Connecticut

Solicitation # p1102-weapons-magazine-ordnance-operations-facility-naval-submarine-base-new-london-groton

The P1102 Weapons Magazine and Ordnance Operations Facility project at the Naval Submarine Base New London in Groton, Connecticut, is a comprehensive construction effort managed by J & J Contractors, Inc. The project spans 1828 calendar days and involves the construction of six Containerized Long Weapons Storage units, two Box G magazines, and one Box H earth-covered high-explosive magazine. Key structural elements include reinforced concrete floors, grounding and lightning protection, intrusion detection systems, and specialized foundations utilizing rigid inclusions and load transfer mats. Additionally, the scope includes the construction of a new Ordnance Operations building, a Truck Inspection facility, and a Sentry building, alongside the demolition of 18 existing magazines and two other buildings. The comprehensive scope of work requires pricing for a wide array of trades, including demolition, abatement, structural steel, mechanical, electrical, plumbing, and fire protection. Site preparation is extensive, involving clearing, rock excavation, grading, and mitigation for impacts on existing wetlands. Infrastructure improvements consist of new access roads, paved loading areas, landscaping, and a full electrical utility system featuring primary and secondary distribution, transformers, and telecommunications. This solicitation is set aside for various small business categories, including SDB, WOSB, HUBZone, and VOSB certifications.

J & J Contractors, Inc

POSTED

about 2 hours ago

DEADLINE

More opportunities from Massachusetts → Department of Correction

Same awarding agency

Exterior Siding InstallationThis subcontract for Exterior Siding Installation involves the removal of old siding and the installation of new panels, trim, and weather-resistive barriers for Housing Units A, B, and C at a Massachusetts Department of Correction facility in Bridgewater. The primary objective is to improve the building envelope, and the selected contractor will perform these services for prime contractors. All personnel assigned to the project must have completed a 10-hour OSHA-approved construction safety course. The solicitation was posted on October 26, 2026, with a response deadline of December 3, 2026. The work falls under NAICS code 238170.

Siding Contractors

POSTED

DEADLINE

in about 1 month

Sheet Metal & Flashing ServicesThis subcontract for Sheet Metal and Flashing Services involves the fabrication and installation of custom sheet metal components for prime contractors working on Massachusetts Department of Correction facility projects in Bridgewater. The scope of work focuses on ensuring watertight integrity through the delivery and installation of flashing, edge metal, coping, and comprehensive drainage systems, including gutters and downspouts. All personnel assigned to the project must complete a 10-hour OSHA-approved construction safety course to comply with site requirements. The solicitation was posted on October 26, 2026, with a response deadline set for December 3, 2026.

Sheet Metal Work Manufacturing

POSTED

DEADLINE

in about 1 month

Commercial Roofing InstallationThis commercial roofing installation subcontract involves the full replacement of roofing systems at the Massachusetts Department of Correction facility located at Bridgewater State Hospital. The scope of work includes the removal of existing materials and the installation of new roofing systems utilizing commercial membranes, insulation, and adhesives in strict accordance with DCAMM standards. The final deliverable is a fully installed and warranted roofing system. To qualify for this project, all personnel must hold DCAMM roofing certification and have completed a 10-hour OSHA-approved construction safety course. The solicitation was posted on October 26, 2026, with a response deadline of December 3, 2026. This project falls under NAICS code 238160 and is managed through the Massachusetts Department of Correction.

Roofing Contractors

POSTED

DEADLINE

in about 1 month

DRM 2026-20 Housing Units A, B and C Roof Replacement at BSH

Solicitation # BD-27-1025-DOCFS-9832-134842

The Massachusetts Department of Correction is soliciting bids for the roof replacement of Housing Units A, B, and C at Bridgewater State Hospital, located at 20 Administration Road, Bridgewater, MA. This project, estimated at $1,179,895.00, encompasses roofing, siding, and sheet metal services as well as general building construction. To be eligible, contractors must be DCAMM certified in roofing. The contract will be awarded to the lowest responsible and eligible bidder based on the sum of the base bid and accepted alternates. Key deadlines include the availability of plans and specs on October 22, 2026, bid intent forms due by November 10, 2026, and a final question deadline of November 19, 2026. General bids must be submitted by December 3, 2026, at 2:00 PM to the Department of Correction in Milford, MA. Bidders must provide a bid deposit, certificates of insurance, and a DCAMM Certificate of Eligibility. The project mandates a combined MBE/WBE participation goal of 13% and a SDVOBE benchmark of 3%. Additionally, all employees must have completed a 10-hour OSHA-approved construction safety course, and the project is subject to annual prevailing wage updates. Work must commence within 10 days of the Notice to Proceed, with a progress schedule submitted shortly thereafter.

POSTED

DEADLINE

in about 1 month

ISS Genuine Parts and Component SupplierThe ISS Genuine Parts and Component Supplier subcontract supports prime contractors on projects for the Massachusetts Department of Correction within the Executive Office of Public Safety and Security. The scope of work involves the procurement and delivery of genuine, lawfully sourced, and traceable replacement components, including CCTV hardware, door controllers, intercoms, and alarm sensors that are compatible with existing manufacturers. Additionally, the supplier is responsible for managing the custody and replenishment of critical spares, providing necessary material cost documentation, and ensuring all hardware is backed by appropriate warranties. This opportunity is categorized under NAICS code 423430 and is centered in Milford, Massachusetts. Interested parties must adhere to the timeline established by the posting date of October 22, 2026, with a final response deadline of January 8, 2027. The contract emphasizes strict traceability and documentation for all delivered hardware to ensure security and compliance standards are met for the Department of Correction.

Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

DEADLINE

Integrated Security System (ISS) Maintenance and Engineering ServicesThe Integrated Security System (ISS) Maintenance and Engineering Services subcontract involves providing technical maintenance, troubleshooting, and engineering support for prime contractors on projects for the Massachusetts Department of Correction. The scope of work includes managing system access, PLC programming, and source code for critical infrastructure such as CCTV, door-control logic, and alarm systems. The contractor is responsible for executing work orders for material changes and delivering detailed service reports to ensure consistent system functionality. Due to the nature of the work, the contractor must be capable of handling security-sensitive ISS information. The project is based in Milford, Massachusetts, and falls under NAICS code 541330. Interested parties should note the response deadline of January 8, 2027.

Engineering Services

POSTED

DEADLINE

27-DOC-1000-ISS

Solicitation # BD-27-1025-DOCCF-1043-134584

The Massachusetts Department of Correction is seeking a contractor to provide authorized maintenance, diagnosis, corrective repair, preventive maintenance, and technical support for the existing Integrated Security System (ISS) and its interfaces at the Souza Baranowski Correctional Center in Milford. The scope of work covers a wide array of technology, including DELL ESXI Servers, GE and Emerson PLC, DeTekion Security Systems, Senstar personnel alarms, BOSCH CCTV, Dukane Intercoms, Juniper network switches, and TRIPP LITE UPS systems. This is a rate-based fee-for-service blanket contract with an estimated annual value of 75,000 dollars and a maximum duration of six years, consisting of an initial two-year term and four optional one-year renewals. The contract specifically excludes the design, procurement, installation, or commissioning of any replacement ISS or facility-wide modernization. The solicitation is designated as a Small Business Purchasing Program (SBPP) set-aside, giving preference to Massachusetts-based businesses with 50 or fewer employees and gross revenues of 15 million dollars or less. Award decisions are based on a best-value evaluation, requiring a minimum threshold of 100 out of 160 base points. Key deliverables include a baseline condition report due within 15 calendar days of the effective date and a preventive maintenance and recovery plan due within 30 calendar days. Contractors must adhere to a one-hour arrival requirement for dispatch and ensure all personnel pass rigorous security and background clearances. Payment is processed via the Commonwealth Electronic Funds Transfer (EFT) program, and bidders are encouraged to implement sustainable packaging practices to earn additional evaluation points.

POSTED

DEADLINE

Woodworking Supplies & ConsumablesThis subcontract focuses on the provision of general woodworking consumables for prime contractors operating on Massachusetts Department of Correction projects, specifically located in Milford. The scope of work includes the supply of commercial grade adhesives, fasteners, sandpaper, and various related shop supplies. To ensure compliance and safety, the contractor is required to provide Safety Data Sheets for all chemical products as mandated by law. Procurement for these materials is handled through a quote-based system. The solicitation was posted on October 9, 2026, with a response deadline set for December 7, 2026. This opportunity falls under NAICS code 423840 and is managed by the Massachusetts Department of Correction.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

in about 1 month

Wood Finishing & Restoration ServicesThis subcontract for Wood Finishing and Restoration Services involves providing specialized finishing and restoration work for prime contractors on Massachusetts Department of Correction projects, specifically located in Milford. The scope of work includes applying commercial wood finishes and stains, restoring existing woodwork, and delivering technical training for equipment use along with the necessary certifications. The contractor must adhere to strict environmental specifications and provide all required Safety Data Sheets. Interested parties should note the response deadline of December 7, 2026, for this project categorized under NAICS code 238390.

Other Building Finishing Contractors

POSTED

DEADLINE

in about 1 month

Woodshop Maintenance & Technical ServicesThe Woodshop Maintenance and Technical Services subcontract involves providing specialized maintenance for woodworking equipment on behalf of prime contractors for the Massachusetts Department of Correction. The scope of work focuses on the upkeep of industrial dust collection and ventilation systems, the execution of tool maintenance contracts, and the procurement of necessary replacement parts. To ensure quality and safety, all services must be performed by manufacturer-authorized service providers, with final deliverables including detailed maintenance logs and fully operational ventilation systems. This opportunity is categorized under NAICS code 811310 and is centered in Milford, Massachusetts. Interested parties must submit their responses by the deadline of December 7, 2026. The contract is managed through the Massachusetts Department of Correction and requires strict adherence to technical specifications to maintain the functionality of the facility's industrial woodshop equipment.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

in about 1 month

Woodworking Equipment & Tool SupplyThis subcontract focuses on the supply and installation of industrial woodworking machinery and tools for prime contractors working on Massachusetts Department of Correction projects, specifically located in Milford. The scope of work includes providing a wide range of equipment for cutting, shaping, joining, and edge banding, with a specific emphasis on automated machinery, CNC systems, and integrated CAD/CAM software. To ensure operational quality, the contract requires that all equipment be backed by manufacturer authorizations and installed by qualified technicians. The response deadline for this opportunity is December 7, 2026, and it falls under NAICS code 423830.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

in about 1 month

Raw Wood & Engineered Lumber SupplyThis subcontract agreement focuses on the supply of high-grade commercial raw wood and engineered lumber for prime contractors working on Massachusetts Department of Correction projects, specifically located in Milford. The scope of work includes the provision of hardwoods such as Oak, Maple, Walnut, and Cherry, as well as softwoods and engineered products including Plywood, MDF, and Particleboard. The supplier is responsible for verifying wood moisture content, adhering to specific grading rules for various species, and providing all necessary compliance documentation upon delivery. The opportunity was posted on October 9, 2026, with a response deadline of December 7, 2026. Operating under NAICS code 423310, the contract ensures that all raw lumber and engineered wood panels meet the rigorous standards required for state correctional facility infrastructure.

Lumber, Plywood, Millwork, and Wood Panel Merchant Wholesalers

POSTED

DEADLINE

in about 1 month

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS