This Solicitation opportunity from Government of Canada was posted on October 14, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

F1782-26C150 - CCGS M Charles Alongside Refit

Closed

WS5836579661International

Submission Closed10/21/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336611

New

SLED

F&W, 2018 Munson Packman Boat Repower project

Solicitation # 2018 Munson Packman Boat Repower

The Confederated Tribes of the Colville Reservation Fish and Wildlife Department is soliciting proposals for a comprehensive propulsion repower and helm system integration for a 30-foot 2018 Munson Packman landing craft. The project requires a factory-certified Honda Marine Authorized Dealer to decommission two existing Honda BF250A outboard engines and install two new Honda BF250D Drive-by-Wire outboards. The scope of work is divided into six phases, encompassing the removal of legacy rigging, a structural transom assessment, the installation of new iST electronic control heads at dual helm stations, integration with the existing SeaStar Power Assist steering and NMEA 2000 network, and a complete fuel system overhaul using USCG Type A1-15 lines. Final acceptance is contingent upon successful pre-flight diagnostics and a minimum two-hour sea trial to validate speed, RPM, and dual-station control handoffs. The selected contractor must provide a secure facility for vessel storage and maintain significant insurance coverages, including 1 million dollars per occurrence for Commercial General Liability and Business Automobile Liability. Contracts exceeding 100,000 dollars require a performance bond; otherwise, a 25 percent retainage applies. All work is subject to Colville Tribal law and the jurisdiction of the Colville Tribal Court, with a strong emphasis on Indian preference in accordance with TERO regulations. Proposals must be submitted in PDF format by November 13, 2026, and will be evaluated based on a 100-point scale considering technical expertise, experience, and cost, though the lowest bid is not guaranteed the award.

Confederated Tribes of the Colville Reservation

POSTED

DEADLINE

Solicitation # SPE7M4-27-T-2573

This contract, solicitation SPE7M4-27-T-2573, is for the procurement of 45 units of a Pilot Valve Cartridge (NSN 4820010935564) by the DLA Weapons Support Fluid Handling Division. The item is classified as a restricted source item and a critical application item, requiring engineering source approval by the Government Design Control Activity. The cartridges are supplied separately from the parent valve assembly and must be tested for conformance to proof pressure, friction, and leakage requirements per the associated Acceptance Test Procedure, though acoustic testing is excluded as it requires the full assembly. Delivery is required within 168 days after order, with a need ship date of May 4, 2027, and an original required delivery date of October 16, 2028. The contract mandates strict adherence to quality and safety standards, including the prohibition of intentionally added mercury and compliance with the DLA Master List of Technical and Quality Requirements. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with palletization governed by RP001. Inspection and acceptance are set at the destination. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment. Compliance mandates include CMMC Level 2 Self-Assessment, the Buy American and Balance of Payments Program, and various FAR/DFARS clauses regarding hazardous materials, export controls, and equal opportunity.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

DOOR, METAL, MARINE STRU

Solicitation # SPE7M4-27-T-2415

Solicitation SPE7M4-27-T-2415, issued by the DLA Weapons Support Fluid Handling Division, is a request for the procurement of five metal marine structural doors. These doors must adhere to drawing 1648659-3211, featuring dimensions of 30W x 66H, right-hand configuration, a latch set, and a fixed light. The delivery is required 168 days after order, with a need ship date of May 4, 2027, and a final delivery date of July 8, 2027, to DLA Distribution San Diego. The contract is designated as FOB Destination Other, and payment must be processed electronically through the Wide Area WorkFlow system. The procurement is subject to strict regulatory and security requirements. Technical data is controlled under ITAR or EAR, requiring contractors to have approved US/Canada Joint Certification Program certification and specific DLA export-control authorizations. Cybersecurity compliance is mandatory, specifically CMMC Level 2 certification via a Third-Party Assessment Organization. Quality standards require the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, respectively. Additionally, the contract incorporates the Buy American Act and Berry Amendment restrictions, and requires adherence to DFARS 252.204-7012 for safeguarding covered defense information.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M4-27-T-2365

Solicitation SPE7M4-27-T-2365 is a fixed-price procurement issued by the DLA Weapons Support Fluid Handling Division for one unit of a Control System, CPR, identified by NSN 2010012637030 and part number SV117 from The Oilgear Company. The requirement is designated as a critical application item. The need ship date is May 4, 2027, with an original required delivery date of October 21, 2027. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to DLA packaging requirements (RP001), MIL-STD-2073-1E for packaging data, and MIL-STD-129 for marking. It includes significant regulatory requirements, including CMMC Level 2 self-assessment, safeguarding of covered defense information, and compliance with the Buy American Act and Berry Amendment. Additionally, the contractor must ensure that mercury or mercury-containing compounds are not intentionally added to the hardware, except where functionally required. Invoicing must be processed electronically through the Wide Area WorkFlow system. While the solicitation is listed as a Service-Disabled Veteran-Owned Small Business set-aside in some metadata, the contract text explicitly states it is not a small business set-aside.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7L4-27-T-0875

This solicitation, issued by the DLA Weapons Support LSO Combat Vehicles and Armament, is a Small Business Set-Aside for the procurement of 12 roller chains (NSN 3020-01-455-5635). The contract is a fixed-price request for quotations with a required delivery date of August 9, 2027, and a need ship date of July 9, 2027. Delivery is FOB Origin, with both inspection and acceptance occurring at the origin. The items must be produced according to reference drawing 19200 12524407 Revision A and must adhere to strict packaging and marking standards, including MIL-STD-2073-1E, MIL-STD-129, and Special Packaging Instruction AM12524407. The contract mandates rigorous quality control, requiring the manufacturer to comply with ISO 9001:2015 and utilize specific sampling methods such as MIL-STD-1916. Government Source Inspection is required, and first article approval authority is delegated to the DCMA, with a first article test report due within 60 days of the contract date. Security and compliance requirements are significant, including adherence to CMMC Level 2, NIST SP 800-171, and strict export controls under ITAR and EAR. Additionally, the contractor must comply with the Berry Amendment and Buy American Act, and utilize the Wide Area WorkFlow system for electronic invoicing and payment.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Angler Surveying Vessel SupplyThis subcontract involves the manufacture and delivery of one angler surveying vessel to support prime contractors working on Ministry of Natural Resources projects within the Lake Ontario Management Unit. The vessel must feature a marine-grade hull and a deck configuration specifically designed for offshore surveying activities, ensuring full compliance with Occupational Health and Safety Act standards for equipment safety. Managed by the Government of Ontario, the project falls under NAICS code 336611 and will be performed in Canada. Interested parties must submit their responses by November 24, 2026, to fulfill the requirement for the delivery of the completed surveying vessel.

POSTED

DEADLINE

Port STL Interlock Evaluation and RepairThis subcontract involves the evaluation and corrective maintenance of the Port STL Interlock system for prime contractors supporting Navsup Fleet Logistics Center Yokosuka projects. The scope of work requires assessing the current state of the system and performing necessary repairs to restore it to full operational standards. All work must be executed using propulsion machinery tools and components specifically designed for the T-AO 206 class and must strictly adhere to MSC Corrective Maintenance Engineering standards. The primary objective of the contract is the delivery of a fully operational Port STL Interlock. This opportunity is categorized under NAICS code 336611 and is managed by the Department of Defense. Interested parties should note the response deadline of November 12, 2026.

Navsup Flt Logistics Ctr Yokosuka

POSTED

DEADLINE

Supply of Brand-Name Marine Seat Bottoms (P/N SW-01309)This subcontract, issued by the Department of Homeland Security agency CG-SEA-C23, requires the procurement of forty brand-name seat bottom components, part number SW-01309, for US Coast Guard 26-foot TANB asset projects. The selected provider must supply the specific brand-name product designated under FAR 13.106-1(b) and ensure all items are delivered to Curtis Bay, Maryland, in compliance with FAR 52.211-8 and 52.211-9 delivery schedules. The opportunity is designated as a total Small Business Set Aside under NAICS code 336611. Interested parties must submit their responses by November 18, 2026, to fulfill the requirement for these specialized marine components.

POSTED

DEADLINE

Marine Structural Welding and FabricationThis subcontract for Marine Structural Welding and Fabrication involves performing specialized steel repairs for prime contractors on Puget Sound Naval Shipyard IMF projects. The scope of work includes the removal of trip hazard stanchions and the installation of CRES 316 drain and vent plugs. Additionally, the contractor is responsible for executing structural repairs to the hull and superstructure in strict accordance with MIL-STD-1310 REV H and AWS D1.1 standards. To ensure quality and safety, the contractor must perform a 100 percent visual inspection of all completed welds and deliver certified structural repairs. This Department of Defense project falls under NAICS code 336611, with a response deadline set for November 18, 2026.

Puget Sound Naval Shipyard IMF

POSTED

DEADLINE

Marine Towing and Docking ServicesThis subcontract for Marine Towing and Docking Services supports prime contractors on Puget Sound Naval Shipyard IMF projects under the Department of Defense. The scope of work involves the transport of the YON-325 vessel from the Manchester Fuel Depot to a repair facility and its subsequent return. The contractor is responsible for the safe docking and undocking of the vessel, which includes the development of comprehensive docking procedures and blocking plans in accordance with drawing 7642547. A critical requirement of the contract is the provision of a certified Dock Master who must be accepted by the Government Docking Observer to ensure operational safety and compliance. The project falls under NAICS code 336611, with a response deadline set for November 18, 2026.

Puget Sound Naval Shipyard IMF

POSTED

DEADLINE

5-year, Long Term, Multiple Award, Indefinite-Delivery, Indefinite-Quantity Procurement Contract

Solicitation # N0010427RY051

NAVSUP Weapon Systems Support is preparing to solicit a five-year, long-term, multiple-award, indefinite-delivery, indefinite-quantity procurement contract. The contract structure consists of one base year and four option years, requiring offerors to provide firm-fixed prices for each year and each contract line item. The scope of work involves the provision of specific parts and materials identified by National Item Identification Numbers, including items such as 24x36 DURA X Tiles. While the government has provided best estimated quantities for evaluation purposes, these do not constitute a guaranteed purchase quantity. Competition is strictly limited to pre-qualified approved sources who possess the necessary engineering skills, manufacturing knowledge, and data rights essential to maintaining part quality. Award eligibility is contingent upon meeting qualification requirements at the time of award in accordance with FAR clause 52.209-1. This procurement does not utilize FAR Part 12 policies for commercial items, although interested parties may notify the contracting officer of available commercial alternatives. This notice serves as a presolicitation and does not constitute a formal request for proposal or a commitment by the government to award a contract.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

USNS EARL WARREN (T-AO 207) ROH/UWILD AMENDMENT 0001

Solicitation # N6264927RL005

NAVSUP Fleet Logistics Center Yokosuka, Site Singapore, is soliciting a fixed-price contract for the repair and maintenance of the USNS EARL WARREN (T-AO 207), specifically for Restricted Overhaul and Underwater Inspection in Lieu of Drydocking (ROH/UWILD) services. The work must be performed in accordance with the Military Sealift Command specification SSUN 27-010 and ABS standards. The period of performance is scheduled from May to July 2027, with the place of performance located within the U.S. 7th Fleet Area of Responsibility, excluding India. This is a total small business set-aside procurement, and interested offerors must maintain an active registration in the System for Award Management (SAM). Proposals are due by December 2, 2026, at 1:00 PM Singapore Standard Time and must be submitted electronically via DoD SAFE. The award will be granted to the responsible offeror providing the lowest evaluated price, provided their technical approach and past performance are rated as acceptable. Evaluation of past performance focuses on similar work performed on Navy or government military vessels within the last five years. Required submission volumes include a price proposal using Attachment J-3, a technical volume, a past performance volume, and a cover page with administrative requirements. Payment will be processed through Wide Area WorkFlow (WAWF) and managed by the designated Project Planning and Execution (PPE) personnel.

Navsup Flt Logistics Ctr Yokosuka

POSTED

about 23 hours ago

DEADLINE

in 26 days

AI Contract Overview

The Department of Public Works and Government Services is seeking a supplier for the alongside refit of the Canadian Coast Guard Ship CCGS M Charles. The project is scheduled to take place from November 25, 2026, to January 18, 2027, with performance located in Sidney, British Columbia. Interested parties may attend an optional bidders conference and site visit to better understand the requirements. This solicitation is restricted to suppliers located within the vessel's area of origin in Western Canada. The response deadline for this opportunity is October 21, 2026. All inquiries and submissions should be directed to the contracting authority, Patrick Wass, under solicitation number WS5836579661.

General Info

Refit of CCGS M Charles in Sidney, BC, from November 2026 to January 2027.

Agency

Government of Canada → Department of Public Works and Government Services

NAICS

336611 - Ship Building and Repairing

Place of Performance

British Columbia, Sidney, CAN

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

1 update

PhaseClosed

PostedSep 14

Solicitation

Deadline changedOct 14

Response deadline changed from Oct 14, 2026 to Oct 21, 2026.

Response DeadlineOct 21

Deadline has passed

Submission Closed

10/21/2026, 07:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of Public Works and Government Services

Contacts1 person available

OfficeN/A

Organization / AgencyGovernment of Canada → Department of Public Works and Government Services

Office AddressN/A

Contacts

Wass Patrick (SPAC/PSPCContracting Authority

contact@example.gov

Full Description

The Canadian Coast Guard has a requirement for a refit of the Canadian Coast Guard Ship CCGS M Charles. The work period for the refit of the CCGS M Charles is November 25, 2026 to January 18, 2027. There is an optional bidders’ conference and site visit associated with this requirement. The sourcing strategy related to this procurement will be limited to suppliers in the Area of Origin of the vessel (Western Canada)