Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Fast-Traceable Shipping and FOB Origin Logistics

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the arrangement of an FOB origin shipment for a connector to FPO 96667, consigned to the USS HALSEY DDG 97, using the fastest traceable shipping method available, with parcel post explicitly prohibited to ensure accountability and timely delivery. All logistics must adhere strictly to FOB origin terms, meaning the supplier assumes responsibility for the item until it is loaded onto the carrier at the point of origin, after which risk and control transfer to the consignee. The shipment must be tracked end to end, with no acceptable substitutes for traceability, ensuring full visibility and security throughout transit to a military destination. This is a subcontract under the North American Industry Classification System code 492110, issued by the Department of Defense’s Active Devices Division, with a response deadline of August 6, 2026, and a posted date of July 30, 2026. The place of performance is identified as FPO 96667, a military postal address typically serving U.S. Navy vessels, underscoring the operational urgency and security sensitivity of the delivery. No set-aside provisions are specified, and the contract does not list a point of contact, implying instructions and coordination are to be handled through the designated DIBBS portal link provided, which must be consulted for further procedural details and submission requirements.

General Info

FOB origin shipment of connector to USS HALSEY via traceable method, no parcel post, by August 6, 2026.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

492110 - Couriers and Express Delivery ServicesView NAICS

Place of Performance

FPO, AP, 96667, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Arrange FOB origin shipment of the connector to FPO 96667, consigned to USS HALSEY DDG 97, using fastest traceable method; parcel post prohibited.

Similar Contracts

Same NAICS industry code

NAICS: 492110
New
Federal
R602--Laboratory Courier Services for the Louisville, KY VAMC
Solicitation # 36C24926Q0264_1
This solicitation, numbered 36C24926Q0264_1, is a Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside for laboratory courier services at the Robley Rex Veterans Medical Center in Louisville, Kentucky, with performance extending to multiple VA outpatient clinics and facilities across the region. The contract is structured as a firm-fixed-price, indefinite-delivery/indefinite-quantity (IDIQ) agreement with a base period of one year from October 1, 2026, through September 30, 2027, and two optional one-year extensions through September 30, 2029, subject to funding and performance. Offerors must submit a single email containing two attachments: a completed SF1449 form and a technical proposal detailing business capabilities, staffing, quality control, contingency planning, and past performance—all limited to 25MB total size. The evaluation will be based on a best-value trade-off approach, weighing technical merit—including business approach, quality assurance, and past performance—alongside price, without assigning formal weights or favoring the lowest bid. The government will inspect and accept all services upon delivery at designated destinations, enforcing strict performance standards such as no more than two late pickups or deliveries every two weeks, 100% accuracy in chain-of-custody documentation, and full adherence to communication protocols. Compliance with FAR and VAAR clauses is mandatory, including prohibitions on subcontracting more than 50% of contract value to non-SDVOSBs, mandatory audit rights, and strict certification of SDVOSB status under the VA Veterans First Contracting Program, which supersedes SBA rules. Contractors must submit electronic invoices via the VA Financial Services Center portal, use electronic funds transfer for payments, and comply with federal requirements including whistleblower protections, business ethics, and reporting of executive compensation. All responses are due by August 5, 2026, and must be submitted via email to the Contracting Officer, Carmen Hanczyk, at the Network Contracting Office 9 in Murfreesboro, Tennessee, with no oral submissions or physical deliveries permitted.
249-NETWORK Contract Office 9 (36C249)

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 492110
New
Federal
Medical Courier Services // 355th Medical Group
Solicitation # HT941026Q2039
This contract is a 100% small business set-aside for medical courier services under the NAICS code 492110, issuing a Request for Quote (RFQ) under FAR Part 12 as a combined synopsis-solicitation with the number HT941026Q2039. The requirement is for a firm-fixed-price contract to transport frozen, refrigerated, and ambient medical specimens between the 355th Medical Group at Davis-Monthan Air Force Base, AZ, and the Veterans Administration Southern Arizona Health Care Facility in Tucson, AZ, with approximately 7 to 8 specimens delivered daily. The base period of performance runs from October 18, 2026, to October 17, 2027, with four optional one-year extension periods through October 17, 2031, making the total contract duration up to five years as permitted under FAR 52.217-9. CLIN 0001 covers monthly scheduled services for 12 months, while CLIN 0002 provides pricing for up to 26 unscheduled on-demand pickups during the base period, with matching option CLINs for each subsequent year. All pricing must be submitted via Exhibit A – Price Worksheet in Excel, including unit and total costs for labor, vehicles, fuel, insurance, supplies, and all other necessary expenses, with evaluations considering the total cost across base and all option years. The quote must demonstrate technical acceptability through a compliant work plan that confirms in-house resources, equipment, and staffing for the PWS, corporate experience with three recent and relevant projects within the last five years using the required Corporate Experience Form, and a realistic transition plan to assume operations by October 18, 2026. Past performance will be assessed by the government using internal sources only, with no submission required from offerors. Compliance with the System for Award Management (SAM), UEI, and electronic invoicing via Wide Area WorkFlow is mandatory, along with adherence to WAWF routing data including DoDAACs HQ0490, HT9410, and HT1165. Contractors must hold a valid DBIDS badge for access to Davis-Monthan AFB and comply with all security provisions including Personal Identity Verification, Cybersecurity Maturity Model Certification Level Requirements, and safeguarding of contractor information systems. The contract incorporates numerous FAR and DFARS clauses addressing labor standards
Defense Health Agency Hcd West

POSTED

2 days ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 334417
New
DIBBS
SLEEVE, LOCKING, ELEC
Solicitation # SPE7M5-26-Q-0819
The contract pertains to the procurement of six locking sleeves for electrical connectors, identified by the NSN 5935-01-666-8618, under solicitation number SPE7M5-26-Q-0819. The supply is priced on a firm fixed price basis with no tolerance for quantity variance, and delivery is required within 125 days after award. Inspection and acceptance occur at the destination, with the point of origin as the FOB location. Packaging must comply strictly with DLA’s Master List of Technical and Quality Requirements, which supersede all other standards; non-hazardous materials must be packaged in accordance with ASTM D3951, while hazardous materials require adherence to TQ requirement IP025 as defined by FED-STD-313. All packaging and labeling must follow MIL-STD-129 specifications, and palletization must meet DLA Packaging Requirements for Procurement (RP001). The item is to be delivered to a U.S. military address in Prince Sultan Air Base, Saudi Arabia, with transportation governed by DLAD Procurement Notes C19 and C20. The shipment is identified with RDD 777 and tied to project 9AL TP 2. The unit of issue is each, and the contract mandates compliance with all applicable DLA standards, including correct marking, labelling, and documentation. The point of contact for the acquisition is Karen Collins of the Department of Defense’s Active Devices Division, with a response deadline of August 15, 2026, and a posted date of July 31, 2026. The material need date is July 23, 2026, and the NSN is linked to a specific purchase request with internal government tracking identifiers.
Electronic Connector Manufacturing

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLE, E
Solicitation # SPE7M5-26-Q-0808
The contract specifies the procurement of two electrical receptacle connectors under NSN 5935-01-494-0348, with a firm fixed price and zero variance in quantity. The item must comply with military specification MIL-DTL-38999N Revision N dated 09/14/2023 and MIL-DTL-38999/24J Revision J dated 08/11/2022, and is subject to qualification requirements under the Qualified Products List for Federal Stock Class 5935. The use of Class I ozone-depleting substances in any phase of manufacturing or testing is strictly prohibited unless approved in writing by the contracting officer, though this restriction does not apply to commercial items as defined in FAR 11.001. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with marking in accordance with MIL-STD-129 and no special marking codes. The item must be shipped via the fastest traceable means, excluding parcel post, to the designated government facility at Picatinny Arsenal, New Jersey, with delivery due 125 days after contract award. Inspection and acceptance occur at destination, and the contractor is required to comply with configuration change management procedures and any engineering change proposals. The procurement is part of a federal solicitation issued by the Department of Defense, with a response deadline of August 8, 2026, and a required delivery date of June 23, 2026.
Electronic Connector Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332996
New
DIBBS
CLAMP, HOSE
Solicitation # SPE7M5-26-T-337C
The contract solicitation SPE7M5-26-T-337C calls for the procurement of 73 units of a critical application hose clamp made from aluminum alloy band material with a t-bolt steel alloy and self-locking nut, featuring an 8.25-inch nominal inside diameter and 0.62-inch nominal width. The item is identified by NSN 4730-00-439-2933 and is supplied under two vendor part numbers: Eaton Aeroquip LLC P/N 321-62-825S and V I J Corp P/N U11-62-825S. Delivery is required within 81 days of award, with FOB origin terms and inspection and acceptance occurring at the destination, specifically DLA Distribution Warner Robins in Georgia. The unit price is set at $73.00 per unit, totaling $5,329.00 for the full quantity, with zero variance allowed in quantity. Packaging must comply with ASTM D3951, but all requirements from the DLA Master List of Technical and Quality Requirements take precedence, including palletization under RP001 and labeling per MIL-STD-129, which mandates proper marking with unit of issue and quantity per unit pack, along with barcoding for traceability. Hazardous material labeling must align with 29 CFR 1910.1200, and all supplies must be free of government identification if non-accepted. The contract incorporates multiple FAR and DFARS clauses including those related to small business representation, employment equity, trafficking in persons, hazardous materials identification, sustainable products, and transportation by sea, with specific adherence to NIST SP 800-171 DOD assessment requirements. Proposals must be submitted electronically via the DLA Internet Bid Board System (DIBBS) by the deadline of August 5, 2026, and must include required representations regarding unique entity ID and CAGE codes, small business status, and compliance with defense telecommunications equipment disclosures. Payment will be processed through WAWF, and the contracting officer retains full authority to determine contract type and insert specific details not currently completed in the solicitation.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 334416
New
DIBBS
FILTER, RADIO FREQUE
Solicitation # SPE7M5-26-T-336P
The contract pertains to the procurement of a Radio Frequency Interference Filter identified by NSN 5915-00-726-7326 and part number 46438-1, with a quantity of 16 units to be delivered to Tinker AFB, Oklahoma. Delivery is required within 50 days after the need ship date of September 20, 2026, with an original required delivery date of September 12, 2027, under FOB Origin terms. All items must be packed in compliance with DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951; hazardous materials must follow TQ IP025 per FED-STD-313, while non-hazardous items require commercial packaging per ASTM D3951. Packaging and labeling must adhere strictly to MIL-STD-129, including proper Unit of Issue and Quantity per Unit Pack specifications, and palletization must conform to RP001. The contract mandates CMMC Level 2 Cybersecurity Maturity Model Certification self-assessment and compliance with FAR clauses including 52.227-1 Alt I and II for government authorization, 52.223-3 for hazardous material identification, and 52.240-93 for safeguarding covered contractor information systems, all under deviation 2026-00038. Invoicing must be submitted via WAWF only, with payment administered through a designated DoDAAC referenced in the award document. Inspection and acceptance occur at the destination point, and the government retains full authority over acceptance criteria, which are governed by referenced military and industry standards. The solicitation requires offerors to provide their UEI and CAGE code if they represent as providing covered defense telecommunications equipment or services, and must self-certify their small business status or socioeconomic classifications including 8(a), HUBZone, SDVOSB, WOSB, or EDWOSB. While no formal evaluation factors or award basis are stated, the procurement is managed through the DIBBS portal under DLA’s automated simplified acquisition framework, with proposals due by August 5, 2026. The contract does not specify total value due to incomplete pricing data in Section B, though historical procurement references indicate prior unit prices in similar transactions.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE7M5-26-Q-0814
The contract specifies the procurement of 50 electrical plug connectors with NSN 5935-00-823-0367 under solicitation SPE7M5-26-Q-0814, requiring strict adherence to technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. The item is qualified and must conform to the Qualified Products List for Federal Stock Class 5935, with configuration changes subject to Engineering Change Proposal and variance request processes. The connector must comply with SAE AS50151 Revision E dated June 1, 2020, and is designated as a critical application item, necessitating full conformance to performance and safety criteria. The use of ozone-depleting substances is strictly prohibited without written approval from the Contracting Officer, and mercury or mercury-containing compounds are banned unless explicitly exempted for functional uses in batteries, lighting, sensors, or weapon systems, with additional containment requirements for portable devices. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with specific packaging codes and procedures outlined, and no special marking is required. Sampling and inspection methods must align with MIL-STD-1916 or ASQ H1331, applying zero non-conformances unless otherwise specified, and unspecified attributes are treated as major. Delivery is FOB origin with a firm fixed price and zero variance tolerance, and the item must be delivered within 90 days after award to the designated DLA distribution center in Tracy, California. The contract prohibits substitution of approved sources without documented manufacturer authorization and pre-award approval, and all materials must comply with hazardous materials shipping guidelines per DLAD Procurement Notes. Pricing is fixed, and the item is intended for federal government use with a required ship date of December 23, 2026.
Electronic Connector Manufacturing

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
BACKSHELL, ELECTRICAL C
Solicitation # SPE7M5-26-Q-0816
The contract specifies the procurement of 197 units of a backsheel for an electrical connector with NSN 5935-01-225-5386, classified as a qualified item requiring compliance with the Qualified Products List for Federal Stock Class 5935 connector assemblies and contacts. The item must conform to SAE AS85049F Revision F dated April 1, 2021, and the technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards. The use of Class I ozone-depleting substances in any phase of design, manufacturing, or testing is strictly prohibited unless explicit written approval is obtained from the Contracting Officer, and this prohibition applies regardless of referenced military or federal specifications. The item is designated as a critical application item and must be packaged in accordance with DLA Packaging Requirements, marking and labeling in compliance with MIL-STD-129, and palletization as specified under RP001. If deemed hazardous per FED-STD-313, packaging must meet TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 applies, though DLA requirements take precedence. The contract is firm fixed price with zero variance in quantity, and delivery is due within 100 days after date of award, with inspection and acceptance occurring at destination. The item is to be shipped to DLA Distribution Jacksonville, and transportation logistics are governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE7M5-26-Q-0816, with a response deadline of August 15, 2026, and the material is needed by January 26, 2027.
Electronic Connector Manufacturing

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR BODY, PLUG
Solicitation # SPE7M5-26-U-0051
The contract is for the procurement of a CONNECTOR BODY, PLUG with NSN 5935014449281 under an Indefinite Delivery Contract (IDC) issued by the Defense Logistics Agency’s Active Devices Division. The solicitation, numbered SPE7M5-26-U-0051, was posted on July 16, 2026, with a response deadline of July 31, 2026, and is set aside exclusively for Women-Owned Small Businesses under NAICS code 334417. The estimated quantity is five units at a unit price of $5.00, with no guaranteed minimum order but a contract ceiling of $350,000.00, and delivery is required within 104 days of award, FOB Origin. Inspection and acceptance occur at the destination, with compliance standards including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, and all packaging must adhere to DLA’s RP001 requirements. Mercury or mercury-containing compounds are prohibited unless specifically exempted for functional uses such as batteries, sensors, or medical instruments, and portable devices containing mercury must have a secondary containment barrier compliant with NAVSEA 5100-003D. All contractors must comply with a comprehensive set of Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses covering employment equity, human trafficking prevention, employment eligibility verification, sustainable products, hazardous materials handling, export controls, electronic invoicing via WAWF, cybersecurity safeguards including NIST SP 800-171, and prohibitions on hexavalent chromium and certain Chinese military companies. Offerors must provide their Unique Entity Identifier and CAGE code, certify their small business status, and disclose any participation in joint ventures or provision of covered telecommunications equipment as required by 252.204-7016 and 252.204-7017. Special requirements include hazard communication labeling per OSHA standards, restrictions on foreign-flagged vessels for ocean transport, and mandatory notification of potential safety issues. Proposals must be submitted electronically through the DLA-BSM Internet Bid Board System by the stated deadline, with no physical submissions permitted, and failure to meet any technical, packaging, or regulatory requirement will result in rejection. Long-term contract performance requires recertification
Electronic Connector Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLE, E
Solicitation # SPE7M5-26-Q-0815
The contract specifies the procurement of an electrical receptacle connector with NSN 5935-01-412-1961 and part number MS17346R36N52P, meeting technical requirements defined by MIL-DTL-22992H(4) Supplement 1 and referenced specification MS17346F. The item is classified as a qualified product requiring compliance with the Qualified Products List for Federal Stock Class 5935, and manufacturing by Amphenol, Matrix, or Pyle National with lot date codes between July 2006 and June 2016 is strictly prohibited. Traceability documentation may be required to verify manufacturing origin and dates. The product must be free of intentional mercury or mercury-containing compounds except in specified exempted applications such as certain batteries, instruments, or weapon systems, and any portable devices containing mercury must meet shock-proof and secondary containment standards per NAVSEA 5100-003D. Use of Class I ozone-depleting substances in any phase of manufacturing or processing is prohibited without written contracting officer approval. The connector is designated a critical application item, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking standards. Palletization follows DLA packaging requirements, with no special marking required. Delivery is due in two shipments of 13 and 11 units respectively, 167 days after award, with firm fixed pricing, zero quantity variance, and destination-based inspection and acceptance. FOB is origin, and all shipments are directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The solicitation number is SPE7M5-26-Q-0815, with responses due by August 15, 2026, and deliveries scheduled for April and November 2026.
Electronic Connector Manufacturing

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 334419
New
DIBBS
PLATE, ELECTRICAL SHIEL
Solicitation # SPE7M5-26-Q-0813
The contract pertains to the procurement of 11 units of a Plate, Electrical Shield identified by NSN 5999-01-347-4699 under solicitation SPE7M5-26-Q-0813, with a firm fixed price and zero variance allowed in quantity. Delivery is required within 100 days after award, with inspection and acceptance occurring at the destination. The item must comply with referenced technical drawings and specifications, including revisions dated 2021, 2022, and 2023, and must meet all requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede other standards. The supplier must adhere to stringent packaging directives per RP001 and MIL-STD-129, with hazardous materials following FED-STD-313 and IP025, while non-hazardous items must comply with ASTM D3951 unless overridden by DLA requirements. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero defects expected unless otherwise stated, and critical attributes require verification levels VII, IV, and II. The product must be marked as specified under RQ017 and managed under configuration control via engineering change procedures. Compliance with CMMC Level 2 cybersecurity self-assessment is mandatory, and the use of ozone-depleting substances is prohibited without written approval from the contracting officer. All packaging and labeling must be properly marked and palletized as directed, with delivery addressed to DLA Distribution at the New Cumberland, PA facility. The item is not eligible for commercial item exemptions and is subject to full government oversight throughout the supply chain.
Other Electronic Component Manufacturing

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
SHELL, ELECTRICAL CO
Solicitation # SPE7M5-26-T-337E
The contract under SPE7M5-26-T-337E involves the procurement of shell, electrical components identified by NSN 5935011318012, with a total quantity of 196 TE units, where each TE unit consists of 10 individual items packaged together. Delivery is required within 38 days after the date of order, with a firm delivery target of September 8, 2026, and shipment must be made FOB origin, meaning the contractor bears all costs and responsibilities up to the point of shipment from their facility. The government will inspect and accept the items at the destination, specifically at DLA Distribution Warner Robins, Building 376, Robins AFB, GA. Packaging must strictly conform to MIL-STD-2073-1E, including preservation methods that require items to be clean and dry without additional preservation, wrapping, or cushioning materials; marking must adhere to MIL-STD-129 with no special marking codes applied. The unit of issue is TE, and the contract specifies that the Government’s authorized unit of issue must be used, with a corresponding ANSI X12 unit of issue to be referenced for system alignment. The contract imposes stringent material restrictions, notably prohibiting the intentional inclusion of mercury or mercury-containing compounds in supplied hardware or materials, with limited exceptions for functional uses in batteries, fluorescent lamps, necessary instruments, sensors, controls, weapon systems, and chemical reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier in accordance with NAVSEA 5100-003D. Multiple FAR and DFARS clauses govern compliance, including requirements for hazardous materials handling, cyber incident reporting under 252.204-7012, safeguarding covered defense information, prohibition of hexavalent chromium, trafficking in persons, employment eligibility verification, and electronic invoicing exclusively through WAWF. Contractors must maintain active SAM registration, provide a UEI and CAGE code, and may be required to affirm socioeconomic status such as small business, SDVOSB, or HUBZone. The contract is fixed-price, with no price variance allowed and no options identified; while pricing details are listed, the unit price field is inconsistent with expected values and no extended total is provided, rendering the exact contract value indeterminate. Technical and quality requirements are incorporated by reference from the DLA Master List, accessible via
Electronic Connector Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 334419
New
DIBBS
MOUNTING PAD, ELECTR
Solicitation # SPE7M5-26-Q-0807
The contract specifies the procurement of nine mounting pads for electrical-electronic components, identified by NSN 5999-01-647-8284, under solicitation SPE7M5-26-Q-0807, with a response deadline of August 15, 2026, and a required delivery date within 90 days of award. The item is subject to stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with compliance governed by the revision in effect on the solicitation issue date. Cybersecurity requirements mandate that the vendor be certified as a CMMC Level 2 C3PAO, and the technical data associated with the product is controlled under either ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior authorization from the Department of State or Commerce. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DOD export control training, and formal approval from DLA. Physical identification of the item must comply with marking requirements, and any non-accepted supplies must have government identification removed. The place of performance is designated as Silverdale, WA, with primary point of contact Barbara Hoffmann, and the procurement is managed by the Department of Defense's Active Devices Division under NAICS code 334419.
Other Electronic Component Manufacturing

POSTED

1 day ago

DEADLINE

in 14 days
View Details