Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

FDRF Camera Systems Upgrade

Active

80NSSC26941061QFederal

Response Deadline08/11/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is a sole source requirement for the FDRF Camera Systems Upgrade, issued by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. The solicitation number is 80NSSC26941061Q, with a posted date of August 7, 2026, and a response deadline of August 11, 2026. The North American Industry Classification System code is 811210, indicating services related to repair and maintenance. The contracting office is located at Stennis Space Center, Mississippi, while the work will be performed in Hampton, Virginia, with a zip code of 23681. Primary point of contact for inquiries is Shanna Patterson, reachable via email at shanna.l.patterson@nasa.gov. As a sole source procurement, this opportunity is not open to competitive bidding and is awarded directly to a single vendor based on unique qualifications or requirements.

General Info

Sole source contract for FDRF Camera Systems Upgrade, NASA, Stennis to Hampton, response deadline August 11, 2026.

Agency

National Aeronautics And Space Administration → NASA Shared Services CenterView Agency

NAICS

811210 - Electronic and Precision Equipment Repair and MaintenanceView NAICS

Place of Performance

Hampton, VA, 23681, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 7

special-notice

Response DeadlineAug 11

Submission deadline

Response Deadline

08/11/2026, 12:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

Contacts1 person available

OfficeSTENNIS SPACE CENTER, MS, 39529, USA

Organization / Agency

National Aeronautics And Space Administration → NASA Shared Services Center

View Agency Profile

Office AddressSTENNIS SPACE CENTER, MS, 39529, USA

Contacts

Shanna Patterson

contact@example.gov

Full Description

Show more

** THIS IS A SOLE SOURCE REQUIREMENT ** for FDRF Camera Systems Upgrade

Similar Contracts

Same NAICS industry code

Annual Purchase for Maintenance of Forward Looking Infrared Video Management System

Solicitation # F2027003 Addendum 1

Tarrant County is seeking bids for an annual contract to maintain the Forward Looking Infrared Video Management System, with the award going to the lowest responsive bidder meeting all technical specifications. The initial contract term is twelve months, commencing on the date of award or upon notice to proceed as determined by the Purchasing Department. Prices submitted must remain fixed for the entire duration of the contract, and the county retains the option to extend the contract for two additional twelve-month periods provided the vendor agrees and all required documentation is submitted and remains valid. Should Tarrant County elect to exercise a renewal option, the vendor must submit updated documentation no later than thirty days before the start of the renewal period; failure to do so in a complete and timely manner may result in the rescission of the renewal or a new solicitation. The solicitation, identified as F2027003 Addendum 1, was posted on August 7, 2026, with a response deadline of August 27, 2026, and all inquiries should be directed to Allan Tucker, Senior Buyer, at the provided contact information.

POSTED

about 7 hours ago

DEADLINE

Service and Maintenance Agreement for Bioraptr hig

Solicitation # 75N98026Q00974

The National Institutes of Health, Office of the Director, Office of Acquisitions, is seeking proposals under solicitation number 75N98026Q00974 for a firm-fixed-price contract to provide service and maintenance for the Bioraptr hig system. This acquisition is conducted under streamlined procedures for commercial items as outlined in FAR Subpart 12.6, with no separate written solicitation issued. The requirement is unrestricted, open to full and open competition, and is not expected to exceed the simplified acquisition threshold. The assigned NAICS code is 811210 for Electronic and Precision Equipment Repair and Maintenance, with a small business size standard of $34.0 million in annual receipts. Proposals must be submitted by August 24, 2026, and all provisions and clauses in effect as of the Federal Acquisition Circular dated August 7, 2026, apply. The contract will be awarded based on best value to the government, and the point of contact for inquiries is Johnsson, Jaddua C, reachable via email at jaddua.johnston@nih.gov. Performance is expected to occur in Bethesda, Maryland, with the agency office located at 20892, USA.

National Institutes Of Health Olao

POSTED

about 8 hours ago

DEADLINE

Notice of Intent to Single Source to AB SCIEX LLC

Solicitation # FD-2026-467-RBC

The U.S. Department of Commerce, through NOAA’s National Marine Fisheries Service, intends to enter into a sole-source contract with AB SCIEX LLC for comprehensive multi-year service and support of its AB SCIEX ExionLC AE liquid chromatographer coupled with QTRAP 5500 tandem mass spectrometer systems. This requirement includes one base year and three option years to ensure continuous, uninterrupted operation of the high-precision instrument used by the Northwest Fisheries Science Center’s Environmental Chemistry Program. The decision to pursue a sole-source procurement is grounded in the exclusive nature of the proprietary technology and servicing protocols, as only AB SCIEX LLC possesses the authorized certifications, internal schematics, diagnostic software, and factory-trained personnel required to maintain the system’s ultra-sensitive performance under demanding physical conditions. No other vendor can provide services that meet the technical standards necessary for the research environment, and alternative service providers risk causing irreversible damage to the high-value equipment through improper repairs. The contract falls under NAICS Code 811210 with a $34 million small business size standard, and no set-aside is planned. The government has determined that AB SCIEX LLC is the only viable source capable of delivering the required service quality, citing exclusive licensing rights, proprietary data, OEM-specific training, and unauthorized access restrictions as barriers to competition. This notice is not a solicitation and does not invite competitive bids, but firms may submit written documentation within 15 days of publication to challenge the sole-source determination. Responses must be in writing and submitted to Raynier Camerino at raynier.camerino@noaa.gov by August 22, 2026. The government retains full discretion over whether to proceed with a competitive acquisition based on any submissions received. The contract will be performed in Seattle, Washington, with the office of primary contact located in Kansas City, Missouri.

Department Of Commerce Noaa

POSTED

about 8 hours ago

DEADLINE

Evaluation and Calibration of the Air Data Test Set (ADTS) Calibrator (ADC-2500V3)

Solicitation # 70Z03826QE0000051

The United States Coast Guard Aviation Logistics Center is soliciting quotations for the evaluation and calibration of two Air Data Test Set Calibrators, model ADC-2500V3, with serial numbers 488 and 408, under solicitation number 70Z03826QE0000051. This Request for Quotation is issued as a sole source procurement under FAR 6.302-1(b)(2), authorizing award exclusively to TESTVONICS INC, the Original Equipment Manufacturer with CAGE Code 1A9E1, as the only known source capable of providing the required services. The acquisition is classified under NAICS code 811210 with a small business size standard of $34.0 million in average annual receipts, though no set-aside is being used. The task order will be awarded on a firm-fixed-price basis, with delivery required by September 15, 2026, for the first unit and November 30, 2026, for the second. All work must be traceable directly to the OEM, and contractors must submit a Certificate of Conformance compliant with FAR 52.246-15; non-OEM offerors must provide additional manufacturer certification and full traceability documentation. A redacted Justification and Approval for other than full and open competition is included with the solicitation. No drawings, specifications, or schematics are available from the agency. Offers must be submitted via email to Denise.J.Bulone@uscg.mil by 11:59 p.m. Eastern Time on August 14, 2026, with the solicitation number clearly noted in the subject line, and an award is anticipated by August 17, 2026.

Aviation Logistics Center (ALC)(00038)

POSTED

about 8 hours ago

DEADLINE

INTENT TO SOLICIT ONLY ONE SOURCE: The Government requires a service and maintenance agreement with Renishaw, Inc. to maintain the Renishaw machine

Solicitation # W911QX26QA195

The U.S. Government is seeking to establish a sole-source service and maintenance agreement with Renishaw, Inc. to ensure ongoing operational support for Renishaw machines located at Aberdeen Proving Ground in Maryland. This requirement is exclusively targeted to Renishaw due to the specialized nature of the equipment and the need for manufacturer-specific expertise in servicing and maintaining its functionality. The solicitation, identified as W911QX26QA195, was posted on August 7, 2026, with a response deadline of August 13, 2026, at 3:59 PM Eastern Time. No set-aside provisions are applied, and the procurement falls under NAICS code 811210, which covers machinery and equipment repair and maintenance services. The contracting activity is managed by the Department of Defense through the W6QK Acc-Apg Adelphi office, located in Adelphi, Maryland. All inquiries and communications must be directed to Laurice Bocao, the primary point of contact, via email at laurice.l.bocao.civ@army.mil. The contract performance site is confirmed to be at Aberdeen Proving Ground, Maryland, with a ZIP code of 21005.

W6QK Acc-Apg Adelphi

POSTED

about 8 hours ago

DEADLINE

16--RANPAC/DELAY LINES,, IN REPAIR/MODIFICATION OF

Solicitation # N0038326RMA93

The contract pertains to the repair or modification of 16 RANPAC delay lines under NSN 7R-1680-015827562-E7, with a quantity of six units required, delivered FOB origin. The solicitation, identified as N0038326RMA93, was posted on August 7, 2026, with a response deadline of September 22, 2026, at 4:00 AM, and is currently classified as a presolicitation, indicating it is in the pre-award phase to gather industry input before formal bidding. The work is managed by the Navsup Weapon Systems Support office under the Department of Defense, located in Philadelphia, Pennsylvania, with no specific set-aside or NAICS code designated. The point of contact for inquiries is Ethan T. Stein, reachable via email at ETHAN.T.STEIN.CIV@US.NAVY.MIL or by phone at (215) 697-2983, and the contract is accessible through the SAM.gov platform. Delivery terms place responsibility on the contractor to ship from their origin location, and no performance location beyond delivery point is specified.

Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

in about 2 months

16--PANEL,FAULT-FUNCTIO, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QFB23

The contract pertains to the repair or modification of a 16-panel fault-function unit identified by NSN 7R-1680-016946940-LU, with a quantity of 15 units required under Technical Data Package Version 001. Delivery is specified as FOB origin, meaning responsibility and risk transfer to the buyer once the items leave the supplier’s facility. The solicitation, numbered N0038326QFB23, was posted on August 7, 2026, with responses due by September 21, 2026, at 4:00 AM. It is classified as a presolicitation, indicating the government is seeking industry input prior to issuing a formal request for proposal. The procurement is managed by the Naval Supply Systems Command Weapon Systems Support under the Department of Defense, with the office located in Philadelphia, Pennsylvania. All contract-related correspondence should be directed to Kate N. Schalck, the primary point of contact, via email at KATE.N.SCHALCK.CIV@US.NAVY.MIL or by phone at (215) 697-1020. The place of performance details are unspecified, and no set-aside classification or NAICS code has been designated for this opportunity.

Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

in about 1 month

16--INPUT DEVICE ASSY (, IN REPAIR/MODIFICATION OF

Solicitation # N0038326RMB18

The U.S. Navy, through the Naval Supply Systems Command Weapon Systems Support, intends to sole-source the procurement of 11 units of an input device assembly with part number 123SCAV9452-3 and NIIN 015817928 under the authority of FAR 6.302-1, citing unique circumstances that justify non-competitive acquisition. The item is designated for repair or modification purposes and will be delivered FOB origin. This presolicitation notice, issued under solicitation number N0038326RMB18 and published on August 7, 2026, seeks potential suppliers to confirm their capability to fulfill the requirement, though responses are not guaranteed to trigger competition. Interested parties have 45 days from the publication date, until September 22, 2026, to submit proposals, quotations, or capability statements; this window is reduced to 30 days if an existing Basic Ordering Agreement applies. The government retains full discretion to decide whether to proceed with a competitive or non-competitive award based on the responses received. The contracting office is located in Philadelphia, Pennsylvania, with Tara B. Kupperstein serving as the primary point of contact for all inquiries.

Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

in about 2 months

59--ELECTRONIC MODULE,S - AND OTHER REPLACEMENT PARTS, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QPC56

This contract solicitation is for the procurement of 11 units of a flight-critical electronic module identified by NSN 7R-5963-015453394-EQ, with delivery terms FOB origin. Due to the technical complexity and safety-critical nature of the item, acquisition is restricted to previously approved sources only, as the Government has determined that adequate technical data and manufacturing knowledge are not publicly available and remain proprietary to the qualified vendors. The design control activity mandates source approval prior to award, and only those sources already vetted and approved by the cognizant Government engineering activity may be considered. Any new proposed source must submit comprehensive documentation aligned with the NAVSUP Weapon Systems Support Source Approval Information Brochures for spares or repair, depending on intent, and failure to provide complete and accurate data will result in disqualification. If a source approval request is pending review at the time of proposal submission, a copy of the cover letter affirming that submission must be included with the offer. The solicitation explicitly prohibits the use of FAR Part 12 commercial item acquisition policies, meaning the Government is not seeking commercially available off-the-shelf solutions and requires specialized, controlled-source components. The item’s technical data, design capability, and repair expertise are not economically accessible to the Government, making reliance on approved sources essential to ensure operational readiness and quality assurance. Offers must be submitted by the deadline of September 21, 2026, and awards will only be made if the offeror, product, or manufacturer meets all qualification criteria at the time of award in accordance with FAR clause 52.209-1. Additional technical specifications and standards may be accessed via ASSIST-Online or the DODSSP system, though patterns, drawings, and deviation lists are not available through these channels. The primary point of contact for qualification inquiries is Dana N. Knittel at NAVSUP Weapon Systems Support in Philadelphia, and the Government retains the right to proceed with award based on Fleet support needs even if new source approvals are delayed.

Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

in about 1 month

59--LOW BAND ARRAY, ESM, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QPC52

The contract pertains to the repair or modification of a Low Band Array for Electronic Support Measures, identified by NSN 7R-5985-016098976-P8, with a quantity of three units to be delivered FOB origin. All proposals must ensure that the offeror, product, or manufacturer meets qualification requirements at the time of award, as mandated by FAR clause 52.209-1, and the Government is not applying commercial item acquisition policies under FAR Part 12, though interested parties may propose commercial alternatives within fifteen days of the notice. Technical data, including specifications, standards, and qualification lists, are accessible via ASSIST-Online or the DoD Single Stock Point, with downloadable PDFs available through the Quicksearch portal and physical requests handled by the DODSSP in Philadelphia. Patterns, drawings, deviation lists, and purchase descriptions are not available through DODSSP and must be obtained elsewhere. The solicitation number is N0038326QPC52, posted on August 7, 2026, with a response deadline of September 22, 2026, and is issued by the Naval Supply Systems Command Weapon Systems Support under the Department of Defense. The office is located in Philadelphia, Pennsylvania, and the primary point of contact for inquiries is Shamus F. Roache, reachable via email or phone at the provided contact details. The place of performance is unspecified, and no set-aside designation is indicated. Interested contractors must review all referenced documentation thoroughly and ensure compliance with the qualification criteria outlined in the solicitation, as failure to meet these at award will result in disqualification. Information regarding qualification requirements and additional details is available through the contracted office, and all submissions must be submitted prior to the deadline.

Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

in about 2 months

J065--NEW SPS Equipment Maintenance at Green Bay CBOC.- 695

Solicitation # 36C25226Q0283

The contract is for preventative maintenance and corrective/emergency repair services for Steris SPS equipment at the Milo C. Huempfner Health Care Center in Green Bay, Wisconsin, under a Firm Fixed Price arrangement with a base period running from September 1, 2026, to August 31, 2027, and an option to renew for up to three additional years. Only Service-Disabled Veteran-Owned Small Businesses (SDVOSBs) are eligible to compete, as this is a mandatory set-aside, and all offerors must provide verifiable certification of SDVOSB status to be considered. Contractors must employ at least one fully qualified Field Service Engineer and one qualified backup, with proof of manufacturer authorization, formal training, and relevant experience required. All work must follow manufacturer specifications, using only OEM or OEM-certified parts, and must include calibration of test equipment to NIST-traceable standards. Emergency response timelines require a four-hour phone response, 48-hour on-site arrival, and 72-hour repair completion. Performance includes four to two preventative maintenance visits per year per unit, firmware updates, and submission of detailed Equipment Service Reports signed by both the contractor’s technician and the Government’s Contracting Officer’s Representative. Contractors must supply all tools, diagnostic software, service manuals, and test equipment, as the government will not provide any of these resources. All contractor personnel requiring facility access must undergo Special Agreement Check and National Agency Check with Inquiries, comply with HSPD-12, OMB M-05-24, and FIPS PUB 201 for Personal Identity Verification, and must return any government-issued identification upon contract completion or termination. Invoices must be submitted electronically to the Veterans Affairs Financial Services Center using approved methods, with payment terms governed by the Prompt Payment Act. Proposals must be submitted via SAM.gov by the deadline of May 20, 2026, and must include the SF-1449 form, UEI, manufacturer certifications, calibration records, training credentials, and full compliance with FAR clauses covering ethics, whistleblower protections, government property, socioeconomic compliance, and contractor conduct. Evaluation will be based on a trade-off process weighing technical quality and price, allowing award to the most advantageous offer, not necessarily the lowest priced. The contract strictly prohibits unauthorized scope changes and requires immediate notification to the COR if work deviates from the Statement of Work, along with a formal cost estimate for any additional effort. Final acceptance rests with

252-NETWORK Contract Office 12 (36C252)

POSTED

about 8 hours ago

DEADLINE

in about 1 hour

49--TEST PROGRAM SET, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QFB18

The U.S. Navy, through NAVSUP Weapon Systems Support in Philadelphia, intends to award a sole source repair contract for two units of Test Program Set, Part Number H641, NSN 7R-4920-016667514-SX, to Howell Instruments INC. This action is justified under 10 U.S.C. 3204(a)(1) and FAR 6.302 due to the absence of available technical data or drawings, and the fact that the government does not own or have rights to the intellectual property necessary to source the part from any other vendor. The repair service will be conducted under FAR Part 15 procedures, with delivery terms FOB origin, and is not subject to commercial item acquisition policies under FAR Part 12. While the notice is not a formal request for proposals, all capability statements or quotations received within 45 days of the synopsis posting will be evaluated to determine if competition is viable, though the agency anticipates no other source can satisfy the requirement. Any firm not previously approved to perform this repair must submit a Source Approval Request, but the timeline will not be extended to accommodate such submissions. The opportunity is not set aside for small businesses and will be handled entirely through electronic means via NECO, with no hard copies or phone inquiries accepted. Potential offerors must submit their qualifications via email to the designated point of contact, Kate N. Schalck, and responses are due by September 21, 2026.

Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

in about 1 month

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

Unison CE True Planning Software

Solicitation # 80NSSC26941027Q

This contract is a sole source requirement for the Unison CE True Planning Software, exclusively awarded under solicitation number 80NSSC26941027Q, with a posted date of August 7, 2026, and a response deadline of August 11, 2026. The procurement is managed by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, under NAICS code 513210, which pertains to computer systems design and related services. The contract is issued from the agency's office located at Stennis Space Center, Mississippi, with the performance location specified as Cleveland, Ohio, 44135. As a sole source action, no competitive bidding is permitted, indicating that Unison CE True Planning Software is deemed the only suitable solution to meet NASA’s specific operational needs. Primary point of contact for inquiries is Shanna Patterson, reachable via email at shanna.l.patterson@nasa.gov. The contract type is designated as a special notice, reflecting its unique non-competitive nature and specialized requirement.

Software Publishers

POSTED

about 8 hours ago

DEADLINE

PCB FABRICATION AND ASSEMBLY OF HPSC PROCESSOR CARD

Solicitation # 80NSSC26939777Q-R1

The contract requests proposals for the fabrication and assembly of an HPSC processor card under solicitation number 80NSSC26939777Q-R1, with a strict deadline of August 11, 2026, at 8:00 PM Eastern Time. This is a Small Business Set Aside, meaning only small businesses are eligible to respond, and the North American Industry Classification System code is 334418, which pertains to other electronic component manufacturing. All vendors must reference the Notice ID when submitting their proposals and are required to review the attached Statement of Work and Request for Quotation for detailed technical and procedural requirements. The opportunity is managed by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, with the point of contact being Cody Guidry, reachable at cody.d.guidry@nasa.gov. The award will be administered from the Stennis Space Center in Mississippi, though the specific place of performance is not defined. Proposals must be submitted through the SAM.gov portal linked in the posting.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 8 hours ago

DEADLINE

Custom 3-channel constant-temperature-anemometer (CTA) system

Solicitation # 80NSSC26939337Q

This contract is a sole source requirement for a custom 3-channel constant-temperature-anemometer (CTA) system, exclusively procured to meet specific NASA research needs. The solicitation number is 80NSSC26939337Q, posted on August 7, 2026, with a response deadline of August 11, 2026. The acquisition falls under NAICS code 541330 for scientific research and development services and is managed by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. The office is based at Stennis Space Center in Mississippi, but the system must be delivered and performed in Hampton, Virginia, where the operational requirements are centered. Shanna Patterson from NASA is the primary point of contact for all inquiries and submissions, reachable via email. The uniqueness of the requirement ensures no competitive bidding, as the CTA system must be custom-engineered to satisfy specialized experimental conditions not meet by off-the-shelf solutions.

Engineering Services

POSTED

about 8 hours ago

DEADLINE

Schneider Electric HW & Support

Solicitation # 80NSSC26937863Q

NASA/NSSC is issuing a sole-source contract to Crescent Electric Supply Company for Schneider Electric hardware and related support services under FAR 12.102(a), determining that this vendor is the sole provider of the required commercial items. The procurement is for industrial automation components including backplane extenders, power supplies, discrete I/O modules, and terminal blocks, along with eight hours of application engineering support at $200 per hour, resulting in a total estimated value of $1,600. All hardware items are specified by exact part numbers and must be factory-built to order with a delivery lead time of ten business days. Performance will occur at NASA Glenn Research Center in Cleveland, Ohio, with no fixed delivery dates other than the ARO (As Required/Ordered) schedule. The solicitation explicitly states that no price quotes will be reviewed or accepted, and the award is non-competitive based solely on the vendor’s unique status as the sole source. Offerors may submit their capabilities and qualifications by 8:00 a.m. Central Standard Time on July 27, 2026, but only to assist the government in determining whether to proceed with a competitive or sole-source approach; this submission does not constitute a bid. Communication must be in writing, reference the solicitation number 80NSSC26937863Q, and exclude oral responses. The acquisition follows commercial item procedures under FAR Part 12, with no set-aside provisions, no specified packaging or marking standards, and no detailed inspection or acceptance criteria outlined. The NASA FAR Supplement clause 1852.215-84 (Ombudsman) applies, and inquiries should be directed to Monica Wilson or Karen Artis. No pricing is provided for the hardware line items, and no accounting, payment, invoicing, or CAGE/UEI information is included in the solicitation.

Current-Carrying Wiring Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

Purchase of batteries for GoSwift power system

Solicitation # 80NSSC26937717Q

NASA is seeking small business vendors to supply 28Vdc and 115Vac Electronic Circuit Breaker Units, along with associated connectors and backshells, for use in the GoSWIFT power system at the Armstrong Flight Research Center in Edwards, California. The solicitation, numbered 80NSSC26937717Q, is a Total Small Business Set-Aside under NAICS code 336413 and will be awarded using the Lowest Price Technically Acceptable (LPTA) method, with technical acceptability evaluated before price. All vendors must demonstrate compliance with SAE AS9100 and NASA Q-1B quality standards, submit a formal Certificate of Conformance per FAR 52.246-15, and provide a written affirmation of their ability to meet these quality requirements, or their quote will be deemed non-responsive. Each response must include verifiable proof of manufacturer pricing and written authorization to resell the specified items, with delivery required no later than March 1, 2027, under F.O.B. Destination terms to the designated warehouse at Edwards, CA. The contract is firm-fixed-price, with payment terms of NET 30, and includes provisions for duty-free entry of foreign supplies over $20,000, export control compliance under ITAR and EAR, and mandatory SAM.gov registration with verified UEI and CAGE codes. Vendors must submit proposals via email to Tracy Bremer by 4:00 p.m. Central Time on July 29, 2026, and all items must be marked with “UNITED STATES GOVERNMENT” and “Duty-Free Entry” on shipping documentation. The contract includes clauses for personal identity verification, government property, accelerated payments to small business subcontractors, and sustainable procurement, but no alternates are permitted. No specific packaging, preservation, or barcoding standards are defined beyond the referenced F.O.B. clauses and quality certifications.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

m + p International Software and HW Purchase

Solicitation # 80NSSC26941060Q

This contract is a sole source requirement for the purchase of software and hardware from m + p International, issued under solicitation number 80NSSC26941060Q by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. The opportunity was posted on August 7, 2026, with a response deadline of August 11, 2026, and falls under NAICS code 541512 for computer systems design services. The contract is not subject to any set-aside provisions and is being procured directly from the sole provider without competition. The performing office is located at Stennis Space Center in Mississippi, with the primary place of performance in Hampton, Virginia, at ZIP code 23681. Shanna Patterson from NASA is the primary point of contact, reachable via email at shanna.l.patterson@nasa.gov, and further details can be accessed through the SAM.gov portal linked in the posting.

Computer Systems Design Services

POSTED

about 8 hours ago

DEADLINE

KRÜSS DSA100 Expert Drop Shape Analyzer, Software, Installation, and Training

Solicitation # 80NSSC26941077Q

Vendors must submit a bid for the KRÜSS DSA100 Expert Drop Shape Analyzer including software, installation, and training, with a strict brand-name or equivalent requirement. The solicitation number is 80NSSC26941077Q and responses are due by August 13, 2026. Bids must reference this tracking number in the email subject line, and payment will not be made via credit card. The contract is a Small Business Set Aside under NAICS code 334516, with performance located in Hampton, Virginia, and the contract is managed by the NASA Shared Services Center headquartered at Stennis Space Center, Mississippi. All proposals must include the vendor’s CAGE/UEI code, confirm FOB Destination terms, specify lead time for delivery, and provide the point of contact name and email address. The primary point of contact for inquiries is Shanna Patterson at shanna.l.patterson@nasa.gov.

Analytical Laboratory Instrument Manufacturing

POSTED

about 8 hours ago

DEADLINE

PR for Hamamatsu parts - quote #QUO-70708-M0H3W9

Solicitation # 80NSSC26941311Q

This is a sole source procurement for Hamamatsu parts under quote number QUO-70708-M0H3W9, issued by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. The solicitation, identified by number 80NSSC26941311Q, was posted on August 7, 2026, with a response deadline of August 11, 2026. The contract falls under NAICS code 334516, which pertains to the manufacturing of instruments and products for measuring, testing, and controlling various physical quantities. Performance of the work is required in Hampton, Virginia, with the contract office located at Stennis Space Center in Mississippi. Shanna Patterson is the primary point of contact for inquiries, reachable via email at shanna.l.patterson@nasa.gov. As a sole source requirement, this procurement is not open to competitive bidding and is designated for a specific supplier to fulfill the specialized needs associated with Hamamatsu components.

Analytical Laboratory Instrument Manufacturing

POSTED

about 8 hours ago

DEADLINE

Frame Assembly and Cleanroom Integration Services

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Specialty Fabric Supply with Fire-Retardant Certification

Nonwoven Fabric Mills

POSTED

DEADLINE

Cleanroom-Compatible Fabricated Flat Panel Frames

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Unable to Decompose Prime Contract

POSTED

DEADLINE