This Solicitation opportunity from Department Of Defense was posted on August 11, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

FEELER, PINION AND S

Closed

SPE7M4-26-T-330MFederal

Submission Closed08/21/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # N0010426QXA48

This contract solicitation, issued under Navy Supply Systems Command Weapon Systems Support Mechanicsburg, seeks a Firm-Fixed Price procurement of the ACTUATOR,ELECTRO-ME with NSN 7104048-19, requiring strict adherence to MIL-STD-129 marking and MIL-STD-2073 packaging standards. The item must be sourced exclusively from an authorized distributor or manufacturer, with proof of authorization required via official documentation from the original equipment manufacturer. Submission must be made electronically to [email hidden] by the revised offer due date of 8 June 2026, and includes mandatory fields for unit price, total price, delivery lead time, CAGE codes for both awardee and inspection, cost breakdown with profit rate, and a minimum 90-day quote expiration. All bids must conform to technical specifications outlined in MIL-STD-973 for configuration control, and any design changes require prior written approval from the contracting officer, classified under specific code designations for part substitutions. The contract includes stringent quality assurance mandates where the contractor assumes full responsibility for inspection and compliance, regardless of whether government inspection is conducted, and must maintain inspection records for 365 days after delivery. FOB Origin terms apply to all freight, and Government Source Inspection is required. The solicitation operates under Emergency Acquisition Flexibilities and incorporates annual certifications with deviations noted, while also enforcing strict traceability protocols: unauthorized distributors will not be considered. Documentation referencing military standards can be obtained through designated DoD sources, and all technical data provided by the Navy is subject to distribution statements governing dissemination, including NOFORN restrictions for certain materials. Award will be bilateral, contingent upon the contractor’s written acceptance, and only technically acceptable offers at the lowest price will be evaluated.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Guided Missile Component Protective Cover ManufacturerThis subcontract involves the manufacture and supply of nine protective covers for missile components to support prime contractors on Defense Logistics Agency projects. The selected provider will utilize additive manufacturing equipment and materials to fabricate covers that meet the specific requirements for NSN 1420-01-614-4164. All production must strictly adhere to L31 additive manufacturing standards and Department of Defense quality assurance requirements. The project is managed by the DLA Weapons Support ASC Commodities Division under the Department of Defense, with performance taking place in New Cumberland. The contract falls under NAICS code 336415, and interested parties must have responded by the deadline of November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-27-T-5001

Solicitation SPE4A6-27-T-5001 is a fixed-price request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of three Snubber Guide Assemblies, identified by NSN 1440010919019. The manufacturing process requires metal casting and the use of specific tooling. Approved sources include Engineered Magnetics Inc and Marvin Engineering Co., Inc., though other offerors may seek source approval from the design control activity. Delivery is required within 20 days after order, with the original required delivery date set for October 6, 2026, shipping FOB Origin to Marine Corps Air Station Beaufort, South Carolina. The contract mandates strict quality and security compliance, including a CMMC Level 2 Self-Assessment and adherence to Covered Defense Information requirements. Inspection and acceptance will occur at the destination based on zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Packaging must comply with ASTM D3951 and MIL-STD-129, with DLA Master List requirements taking precedence. Additionally, the contractor must utilize the Wide Area Workflow system for invoicing and comply with various FAR and DFARS clauses regarding equal opportunity, hazardous material identification, and the prohibition of covered defense telecommunications equipment.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE7M4-27-T-1919

This solicitation, number SPE7M4-27-T-1919, is a small business set-aside for the procurement of 133 units of stave-shaped bearings (NSN 2010-01-338-3693). These components are Class 3, Size 8, 60 inches long, and manufactured from water-lubricated bonded synthetic rubber with a Shore A durometer of 85 points plus or minus 5 points. The items must adhere to specific military specifications and a length tolerance of +.000/-.060, which is an exception to drawing 803-1385664. Additionally, each stave must be marked with the cure date at the point of manufacture. The contract mandates strict quality and packaging standards, including the use of Qualified Products Lists (QPL) or Qualified Manufacturers Lists (QML). Packaging must follow MIL-STD-2073 Method 10 and MIL-DTL-2845E, requiring individual wrapping in opaque or kraft paper and overpacking in wooden boxes to prevent deformation. Metal strapping and staples are strictly prohibited. The items are designated as Type I Shelf Life with a non-extendable period of 180 months. Delivery is required within 125 days of award, with a need ship date of November 3, 2026, and a final delivery date of March 23, 2027, delivered FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. Inspection and acceptance will occur at the destination.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE4A7-27-T-2211

Solicitation SPE4A7-27-T-2211 is a request for quotations issued by the DLA Weapons Support ASC Supplier Oper AE and AF Div for the procurement of 75 units of a wiper ring, identified as a commercial off the shelf and critical application item with NSN 1430-00-921-6975. The specific part is identified as Engineered Seal Products Inc 5F263 P/N 006-041. Delivery is required within 152 days after the order, with a need ship date of April 6, 2027, and a final required delivery date of August 18, 2027. The items are to be delivered FOB Origin to the DLA Distribution Depot at Hill AFB, Utah, where both inspection and acceptance will take place. The contract incorporates stringent technical and quality requirements via the DLA Master List, including specific packaging standards such as ASTM D3951 and RP001, and marking requirements per MIL-STD-129. Compliance with the Buy American Act and the Berry Amendment is mandatory for quotes exceeding the micro-purchase threshold. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and adherence to DFARS cybersecurity and reporting standards. Quotations must be submitted via the DIBBS portal by November 4, 2026, and may be subject to the HUBZone price evaluation preference.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

COVER, UMBILICAL PLUG

Solicitation # SPE4A6-27-T-7249

Solicitation SPE4A6-27-T-7249 is a request for quotations issued by the Defense Logistics Agency (DLA) Weapons Support ASC Commodities Division for the procurement of eight umbilical plug covers (NSN 1440-00-091-7640). The contract requires delivery within 91 days after order to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the origin, and the manufacturer's inspection system must comply with SAE AS9003 or ISO 9001 standards. Payment and invoicing are to be processed electronically via the Wide Area WorkFlow (WAWF) system. The procurement includes stringent technical and security requirements, including CMMC Level 2 certification and compliance with ITAR and EAR export controls for technical data. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific requirements for bare item marking and the removal of government identification from non-accepted supplies. The solicitation provides a price evaluation preference for HUBZone Small Business Concerns and incorporates various FAR and DFARS clauses regarding sustainable products, hazardous material identification, and the prohibition of certain telecommunications equipment. Quotations are due by November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

VANE, LEFT HAND, GUID

Solicitation # SPE4A6-27-T-6999

Solicitation SPE4A6-27-T-6999 is issued by the DLA Weapons Support ASC Commodities Division for the procurement of 25 units of VANE, LEFT HAND, GUID (NSN 1420-00-505-0673). This item is designated as a critical application item and must be manufactured in accordance with Basic Drawing NR 30003 2877846, Revision J. Delivery is required by October 6, 2027, with a need ship date of April 20, 2027, to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with a specific prohibition on the use of mercury or mercury compounds. Due to the nature of the technical data, the item is subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Administrative requirements include electronic invoicing via Wide Area WorkFlow and quote submission through the DIBBS portal. Key regulatory clauses include DFARS 252.204-7012 for safeguarding covered defense information and various domestic material restrictions, including the Buy American Act and the Berry Amendment.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

COVER, PROTECTIVE, GUIDE

Solicitation # SPE4A6-27-T-7101

Solicitation SPE4A6-27-T-7101 is a Request for Quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of nine protective covers for guided missile components, identified by NSN 1420-01-614-4164. The required delivery date is April 23, 2027, with a delivery lead time of 169 days and shipping terms set as FOB Origin. Delivery and inspection are both designated at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to quality and packaging standards, requiring compliance with ASTM D3951, MIL-STD-129 for marking, and RP001 for palletization. Quality assurance will be managed through sampling methods per MIL-STD-1916 or ASQ H1331, with specific AQLs assigned for critical, major, and minor attributes. Key regulatory requirements include a CMMC Level 2 Self-Assessment, adherence to the Buy American and Balance of Payments Program, and the use of the Wide Area WorkFlow system for electronic invoicing. Quotations must be submitted by November 4, 2026, to the issuing office in Richmond, Virginia.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE7M1-27-T-1630

This fixed-price solicitation, issued by the Defense Logistics Agency Weapons Support Maritime Supply Chain, is for the procurement of one locating ring, identified as a critical application item under NSN 2010-01-082-2412. The item must be manufactured to precise specifications, including an outer diameter of 59 inches, an inner diameter of 56.5 inches, a length of 1.980 inches, and 14 tapped holes. Delivery is required within 242 days after order, with the destination located in Bremerton, Washington. The contractor is required to use a wooden crate for packaging and must adhere to MIL-STD-129 for marking and RP001 for palletization. The contract includes stringent regulatory and security requirements, including CMMC Level 2 certification and strict export controls under ITAR and EAR, requiring an approved US/Canada Joint Certification Program certification for access to technical data. Quality standards mandate that the manufacturer's inspection system comply with ISO 9001:2015, and inspection will be conducted at the origin. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act and Berry Amendment. While the solicitation is listed as a total small business set-aside in some metadata, the document text specifies it is not a small business set-aside.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE4A6-27-T-6907

Solicitation SPE4A6-27-T-6907 is a request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of one protective cap, identified by NSN 1440-01-730-0181 and Glenair part number 660-009NF24S4-09. The contract requires delivery within 20 days after order, with an original required delivery date of October 7, 2026. Shipping is established as FOB Origin, with the final destination being F.E. Warren AFB in Wyoming. Inspection and acceptance will both occur at the destination. The procurement is subject to rigorous quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with the Buy American Act and Berry Amendment. Additionally, the contractor must adhere to DFARS cybersecurity reporting standards and FAR regulations regarding equal opportunity for workers with disabilities and the prohibition of human trafficking.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Bearing Assembly (NSN 2010010761147)This subcontract opportunity is for the manufacture or procurement of a Bearing Assembly, identified by NSN 2010010761147, to support prime contractors under DLA supply contracts. The selected provider must ensure the assembly meets all technical specifications and undergoes rigorous quality control inspections. Additionally, the contractor is responsible for packaging and marking the single unit in accordance with RP001 and MIL-STD-129 standards for delivery to Fort Hood. The contract is issued by the Department of Defense through the DLA Weapons Support Aviation Supply Chain ESOC Buys and is designated as a Total Small Business Set-Aside under NAICS code 336415. To be eligible, applicants must maintain an active SAM registration and complete a CMMC Level 2 self-assessment. Responses are due by November 2, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

CONTROL HEAD, DUAL MAST

Solicitation # SPE7M4-27-T-1787

Solicitation SPE7M4-27-T-1787 is a procurement request issued by the DLA Weapons Support Fluid Handling Division for three units of a Dual Master Control Head, identified by NSN 2010015210986 and Brunswick Corp part number 8M0075245. The items are intended for use in 25-foot patrol boats. The required delivery date is February 26, 2027, with a delivery lead time of 112 days after receipt of order. Shipping is established as FOB Origin, with the final destination for inspection and acceptance being DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, while noting that the DLA Master List of Technical and Quality Requirements takes precedence. Palletization must follow RP001 requirements. Key regulatory clauses include FAR 52.246-2 for destination inspection, DFARS 252.225-7001 regarding the Buy American and Balance of Payments Program, and DFARS 252.204-7012 for safeguarding covered defense information. Additionally, the contractor is prohibited from using Class I ozone-depleting chemicals and must comply with FAR 52.204-24 and DFARS 252.204-7016 regarding prohibited telecommunications equipment. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

3 days ago

DEADLINE

in 8 days

AI Contract Overview

This contract is a solicitation issued by the Department of Defense Fluid Handling Division for the procurement of two feeler pinion and s units, identified by NSN 2010-01-101-5803. The requirement specifies parts from Kingsbury Inc, specifically part numbers 465694-REF-D1 and 465748. This is a total small business set-aside under NAICS code 336415, with delivery required within 164 days to DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict adherence to technical and quality requirements, including MIL-STD-129 for labeling and marking and MIL-STD-2073-1E for packaging. Environmental restrictions prohibit the intentional addition of mercury or the use of Class I ozone-depleting substances in the manufacturing and testing processes unless written approval is granted. All items must be marked with the contractor and manufacturer cage codes, part numbers, and available lot or serial numbers.

General Info

DoD procurement of two Kingsbury feeler pinion units for DLA San Joaquin.

Agency

Department Of Defense → FLUID HANDLING DIVISION

NAICS

336415 - Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, USA

Set-Aside

SBA

Documents

RFQ SPE7M4-26-T-330M for Fluid Handling Division

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedAug 11

Combined Synopsis

Response DeadlineAug 21

Deadline has passed

Submission Closed

08/21/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → FLUID HANDLING DIVISION

Office AddressUSA

Contacts

Rory O'Reilly

contact@example.gov

+1 (555) 000-0000

Full Description

FEELER,PINION AND S
FEELER,PINION AND S
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MARK IN ACCORDANCE WITH SEC. 5.3.1 (A THRU D) OF MIL-STD 130.
LABELING/MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
ALL ITEMS OF SUPPLY SHALL BE MARKED IAW MIL-STD-129.
IN ADDITION, EACH UNIT PACK WILL BE MARKED WITH LOT
AND SERIAL NUMBER (IF AVAILABLE), CONTRACTOR'S CAGE
CODE, ACTUAL MANUFACTURER'S CAGE CODE AND PART NUMBER.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE
(ODS) IN THE DESIGN, MANUFACTURING, TESTING,
CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM
UNDER ANY MILITARY OR FEDERAL SPECIFICATION,
STANDARD OR DRAWING REFERENCED IN THIS ITEM
DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE
WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS
OBTAINED. THIS PROHIBITION SUPERSEDES ALL
SPECIFICATION REQUIREMENTS BUT DOES NOT
ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.
THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS
DEFINED IN "FAR 11.001" OR TO PART-NUMBERED
ONLY ITEMS.
KINGSBURY INC. 75333 P/N 465694-REF-D1
KINGSBURY INC. 75333 P/N 465748
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%
SPE7M4-26-T-330M
SECTION B
PR: 7017777478 PRLI: 0001 CONT’D
2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017777478 0001 SE 2.000
NSN/MATERIAL:2010011015803
DELIVERY (IN DAYS):0164
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:20 CLNG/DRY:1 PRESV MAT:49
WRAP MAT:GB CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:F
UNIT CONT:D3 OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN RD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
25600 S CHRISMAN RD REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:02/02/2027 Original Required Delivery Date:10/18/2027
SPE7M4-26-T-330M NSN/Part Number: 2010-01-101-5803 Quantity: 2 SE Purchase Request: 7017777478QTY: 2 Delivery: 164 days ADO