Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

FENDER, VEHICULAR

Active
SPE7LX-26-U-8961Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 27 vehicular fenders, identified by NSN 2510-01-311-6860, under solicitation number SPE7LX-26-U-8961, with a response deadline of August 7, 2026, and a delivery requirement within 103 days after award. Full and open competition applies, and the item is governed by a comprehensive set of technical and quality requirements from the DLA Master List, which must be consulted for all referenced R and I numbers. The product must not contain any Class I ozone-depleting chemicals, and any substitute chemicals require prior approval unless explicitly authorized by the specification. Sampling procedures must comply with MIL-STD-1916 or ASQ H1331 Table 1, using zero-defect acceptance criteria unless otherwise stated, with attributes classified as critical, major, or minor assigned specific verification levels or AQLs. Technical data associated with the item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons, and only DLA contractors with approved JCP certification, completed export control training, and authorized access may handle such data. Cybersecurity requirements mandate CMMC Level 2 certification for any third-party assessment organization involved. The contract is issued by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek designated as the primary point of contact.

General Info

Procure 27 vehicular fenders, NSN 2510-01-311-6860, delivery in 103 days, ITAR-controlled, CMMC Level 2 required.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

336211 - Motor Vehicle Body ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE7LX-26-U-8961.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
View Agency Profile
Office AddressUS
Contacts
Theodore Misiolek
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
FENDER,VEHICULAR
FENDER, VEHICULAR.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
FULL AND OPEN COMPETITION APPLY
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control
SPE7LX-26-U-8961
SECTION B
technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 2510-01-311-6860 Quantity: 27 EA Purchase Request: 1000238151QTY: 27 Delivery: 103 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336211
New
DIBBS
BOX CONNECTOR, ELECTThe contract is for the procurement of 120 packages of BOX CONNECTOR, ELECT, with each package containing two units, as defined by the unit of issue 1 PG = 2 EA effective March 1, 2016, and identified by the NSN 5975012954166. Delivery is required within 162 days from the award date, with an original required delivery date of April 5, 2027, and a need ship date of January 3, 2027. The supplies are to be delivered FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. All packaging must comply with MIL-STD-2073-1E, including preservation method 10, cleaning/drying method 1, and the use of wrap material JA with no cushioning. Marking must adhere to MIL-STD-129, with no special marking required, and palletization must follow DLA Packaging Requirements for Procurement (RP001). The contract strictly prohibits intentional addition of mercury or mercury-containing compounds to the hardware, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, and specified NAVSEA reagents; portable mercury-containing devices must be shock-proof and include a secondary containment per NAVSEA 5100-003D. Hazardous material handling is governed by DFARS 252.223-7001, requiring compliance with OSHA’s Hazard Communication Standard and submission of Safety Data Sheets, with radioactive materials subject to specific labeling under MIL-STD-129. Invoicing and payment must be processed through WAWF, and contractors are required to submit invoices using approved document types such as Invoice and Receiving Report or Invoice 2in1. The contract includes federal acquisition regulation clauses related to equal opportunity, combating human trafficking, employment eligibility verification, hazardous materials identification, sustainable products, cybersecurity safeguarding (including NIST SP 800-171), subcontractor management, and prohibitions on covered defense telecommunications equipment. Contractors must provide unique entity identifiers and CAGE codes and certify their small business status if applicable. The solicitation was issued on July 24, 2026, with responses due by July 29, 2026, and is managed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336211
New
DIBBS
BOOT, DUST AND MOISTUREThe contract solicitation SPE7LX-26-U-8571 calls for the procurement of 409 units of a boot, dust, and moisture seal identified by NSN 5340-01-108-3680 under an indefinite delivery contract with a maximum value of $350,000 and a guaranteed minimum of 61 units. Delivery is required within 155 days after issuance of a delivery order, with FOB origin terms transferring title and risk to the government upon release from the contractor’s location. The item is subject to strict export control under ITAR or EAR, requiring contractors to hold approved US/Canada Joint Certification Program status, complete mandatory DLA training, and pass a questionnaire to gain access to controlled technical data. Packaging and marking must fully comply with MIL-STD-2073-1E for preservation using Method 33 and CLNG/DRY: 1, while labeling follows MIL-STD-129 for shipment and MIL-STD-130N for unique identification and barcoding. Hazardous materials must be identified and labeled per 29 CFR 1910.1200, and ocean shipments require U.S.-flag vessels unless a waiver is granted. Cybersecurity requirements are mandated per NIST SP 800-171, with mandatory reporting of cyber incidents and restrictions on the use of covered telecommunications equipment. The contract is set aside for women-owned small businesses, and offerors must certify their size status and socioeconomic eligibility. Payment is processed exclusively through the Wide Area WorkFlow system using the Invoice and Receiving Report or Invoice 2in1 formats, with inspections and acceptance conducted at the destination by the government. The contract incorporates numerous FAR and DFARS clauses regarding subcontracting, small business representation, alternative contract types, payment acceleration, and contractor information safeguarding, with deviations noted in certain clauses. No unit pricing is specified in the CLIN table, making the final contract value contingent on future order volumes within the established ceiling.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 336211
New
DIBBS
SCREEN, COOLERThe contract is for the procurement of 101 units of SCREEN, COOLER with NSN 2510-01-435-7979 under solicitation SPE7L4-26-T-5817, issued as a total small business set-aside under NAICS code 336211. Delivery is required within 168 days to the DLA Distribution facility at New Cumberland, Pennsylvania, with FOB origin terms and no variance allowed in quantity. The items must be packaged in full compliance with MIL-STD-2073-1E, including specific preservation methods, cushioning materials, and unit container codes, and marked according to MIL-STD-129 with no special marking required. Packaging must adhere to DLA’s reduced plastic initiative without compromising product protection. Inspection and acceptance occur at the destination, and the product must meet all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. The supplier must deliver by the original required date of April 18, 2027, with a needed ship date of January 19, 2027. The contract is managed by the Department of Defense’s Combat Vehicles and Armament office, with primary point of contact Anna-Rachelle Betts, and all transportation details are governed by DLA procedural notes C19 and C20.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 336211
New
DIBBS
STUD, CAB LIFTThe item specified is a STUD, CAB LIFT with NSN 2510-01-223-0039, for a quantity of 30 units, under purchase request 7017604036, with a delivery requirement of 168 days after date of award. Technical data associated with this item is subject to export control under either ITAR or EAR, meaning any disclosure—whether to foreign nationals within the United States or abroad—requires prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled data, and only DLA contractors with approved US/Canada Joint Certification Program certification, completion of mandatory DOD export control training, and authorized approval from DLA may access the technical information. The solicitation number is SPE7L3-26-T-127N, issued by the Department of Defense under the Land Supplier Operations Vehicle Support agency, with a response deadline of August 3, 2026, and a place of performance in Texarkana, Texas, 75507-5000. Primary point of contact is Matthew Curry, reachable via email and phone provided in the contract data.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 336211
New
DIBBS
PARTS KIT, HOOD, ENGINEThis contract calls for the delivery of three kits containing hood and engine compartment parts designed for seal replacement, specifically identified by NSN 2510-01-454-2754 and part number TLCMCV188 from Pattonair USA, Inc. Each kit must be individually packaged as a complete unit with all hardware securely contained in sealed bags or boxes to prevent damage, corrosion, or loss, and no bulk shipping is permitted. Preservation and packaging must strictly comply with MIL-STD-2073-1E Appendix D, including Preservation Method 31, to protect the most critical components within the kit. All units must be marked in accordance with MIL-STD-129 with the designation “1 KT” and include an internal parts list detailing part names, numbers, and quantities. Special marking requirements apply, and segregation and identification must follow the guidelines in MIL-STD-2073-1 Appendix D, ensuring no additional sorting or repackaging is required upon receipt. The packaging must adhere to DLA’s procurement standards and be palletized as specified. Delivery is required within 89 days FOB origin, with zero tolerance for quantity variance and inspection and acceptance occurring at the destination. The item is classified as a critical application product with a zero asbestos allowance as defined by Fed-Std-313. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The contract is issued under solicitation SPE7L1-26-U-0490, with a response deadline of August 7, 2026, and is managed by the Department of Defense’s Land Supply Chain. The unit of issue is “KT” (kit), and all documentation must align with DoD unit of issue standards. Primary point of contact is Jennifer Payne of DLA, reachable via provided email and phone.
LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 336211
New
DIBBS
WINDOW, VEHICULARThe contract solicitation SPE7LX-26-U-8608 issued by the Defense Logistics Agency under the Strategic Acquisition Program Directorate seeks the procurement of vehicular windows identified by NSN 2510012941846, with an estimated quantity of seven units under an Indefinite Delivery Contract structure having a maximum value of $350,000.00. Delivery is required within 86 days after award, with FOB Origin terms and zero tolerance for quantity variance. Inspection and acceptance both occur at the destination, with the product required to arrive in serviceable, ready-for-issue condition without additional packaging or marking. Packaging must strictly comply with MIL-STD-2073-1E, including the use of a double-walled, weather-resistant fiberboard container with flutes oriented for stacking strength and a box maker’s certificate on the bottom flap. Cushioning must prevent breakage, scratches, and damage during transit using approved flexible polyurethane foam meeting MIL-PRF-26514 specifications, with thickness calculated to account for material creep under static stress. Special protection for glass surfaces requires an adhering or plastic film (Code JA) that is easily removable before or after installation. Packing code Z mandates validation of the packaging design against ASTM D4169 Distribution Cycle 18, Assurance Level II, Acceptance Criteria 3, or equivalent military packaging documentation. Marking must follow MIL-STD-129 and ASTM D5445, including special labels reading “FRAGILE, ARROW UP, AND GLASS” and “GLASS DO NOT DROP.” The use of additive manufacturing is prohibited, and contractors must ensure full compliance with the DLA Master List of Technical and Quality Requirements referenced in RA001. The contract includes numerous Federal Acquisition Regulation clauses relating to equal opportunity, trafficking in persons, employment verification, sustainable products, hazardous materials, cybersecurity, subcontracting, inspection, and payment procedures, with electronic invoicing mandated through WAWF. All offerors must have a valid Unique Entity ID and CAGE code, provide socioeconomic status representations including HUBZone, SDVOSB, WOSB, or SDB if applicable, and confirm they do not provide covered defense telecommunications equipment from Communist Chinese military companies. Proposals must be submitted electronically via the DLA BSM DIBBS platform by July 28, 2026, and award is likely based on Lowest Price Techn
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 336211
New
DIBBS
FRAME, COOLER SCREENThe contract is for the procurement of 23 units of a FRAME, COOLER SCREEN with NSN 2510-01-434-6139 under solicitation SPE7L4-26-T-5764, issued by the Department of Defense through the LSO Combat Vehicles and Armament office. Delivery is required within 168 days from the contract date with a firm delivery deadline of January 19, 2027, and all items must be shipped FOB origin with zero tolerance for quantity variance. The item is designated as a critical application item and must comply with all DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951 packaging standards. Packaging and labeling must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization following specified guidelines. The unit of issue is each, priced at $23.00 per unit, totaling $529.00. All packaging must be marked with the correct unit of issue and quantity per unit pack as defined in the contract, and government identification must be removed from non-accepted supplies. Delivery is to be made to DLA Distribution Anniston at 7 Frankford Ave, Building 362, Anniston, AL 36201-4199, with transportation governed by DLAD Proc Note C19 and C20. The solicitation was posted on July 23, 2026, with responses due by August 3, 2026, under NAICS code 336211.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 336211
New
Federal
ACE TrailerThe ACE Trailer solicitation seeks a mobile enclosed gooseneck stage trailer designed for integrated fold-out stage functionality and self-contained utility features to support remote and field operations. The trailer must provide fully enclosed transport capacity while being road-ready and fully compliant with all Federal Motor Vehicle Safety Standards and Department of Transportation requirements, ensuring safe and reliable deployment in diverse operational environments. It is to be delivered fully assembled and capable of operating independently without the need for additional infrastructure or setup beyond standard towing and deployment procedures. This is a Total Small Business Set-Aside under NAICS code 336211, issued by the Department of Defense through the W7NV Uspfo Activity Okang 138 office located in Tulsa, Oklahoma. The solicitation was posted on July 23, 2026, with proposals due by August 6, 2026, at 7:00 p.m. EST. Primary point of contact is Amanda Lonsdale, reachable via phone at 918-833-7305 or email at 138.FW.MSC@us.af.mil. All responses must align with the technical specifications and compliance standards outlined in the attached documents, and performance will take place at the specified Tulsa location.
W7NV Uspfo Activity Okang 138

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 336211
New
Federal
25--SCREEN,COOLERThe U.S. Department of Defense through DLA Land and Maritime is soliciting quotes for 101 units of NSN 2510014357979 SCREEN,COOLER under solicitation number SPE7L426T5817, which is a total small business set-aside as defined by FAR 19.5. The required items must be delivered to W1A8 DLA DISTRIBUTION within 168 days after award, with quotes due by August 3, 2026. Only approved sources, identified as 02978 E9AR106-078 and 0L7R7 388010050-1, are eligible to respond, though all responsible small business concerns may submit a quote if timely received. The solicitation is electronic-only, with no hard copies available, and no specifications, plans, or drawings are provided. Quotations must be submitted electronically via the SAM.gov link, and all inquiries must be directed to the designated buyer email. The NAICS code is 336211 and the office is located in Columbus, Ohio.
DLA Land And Maritime

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 336211
New
Federal
25--FENDER,VEHICULARThe solicitation seeks quotes for 27 vehicular fenders identified by NSN 2510013116860 under contract number SPE7LX26U8961, with a proposed delivery deadline of 103 days after award. This RFQ may lead to an Indefinite Delivery Contract with a one-year term or until aggregate orders reach $350,000, whichever comes first; the guaranteed minimum order is four units, with an estimated annual volume of one order. Shipments will be distributed to multiple DLA depots across CONUS and OCONUS via consolidated and containerized logistics. All quotes must be submitted electronically through the SAM.gov platform, and hard copies are not accepted. Digitized technical documentation including drawings and military specifications can be accessed online. The solicitation is open to all responsible sources, with no set-aside classification, and responses are due by August 7, 2026. Technical inquiries should be directed via email to the point of contact listed in the solicitation document, accessible through the official DIBBS portal or the SAM.gov link provided.
DLA Land And Maritime

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 336211
New
Federal
25--PARTS KIT,HOOD,ENGINEThe solicitation seeks quotes for a Parts Kit, Hood, Engine, identified by NSN 2510014542754, with a requirement for three units to be delivered within 89 days of order placement. This procurement may lead to an Indefinite Delivery Contract with a one-year term or until aggregate orders reach $350,000, whichever comes first, with an estimated two orders per year and a guaranteed minimum of one unit. Items will be shipped to multiple DLA depots across CONUS and OCONUS via consolidated and containerized distribution points. The approved source for this part is 046U2 TLCMCV188, and only electronic submissions are accepted; hard copies are not available. The solicitation is an RFQ open to all responsible sources, with no specifications, plans, or drawings provided. The solicitation number is SPE7L126U0490, posted on July 23, 2026, with responses due by August 7, 2026. The NAICS code is 336211, and the contracting office is under the DLA Land and Maritime organization based in Columbus, Ohio. All inquiries must be directed via email to the designated point of contact listed in the solicitation document.
DLA Land And Maritime

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 336211
New
Federal
801 RHG OLA Water TankerThis solicitation, titled 801 RHG OLA Water Tanker and identified by solicitation number F4ATD16160AQ02, is a Total Small Business Set-Aside under FAR 19.5 targeting NAICS code 336211 with a size standard of 1,000 employees, requiring all respondents to qualify as small businesses. The requirement is for a turnkey solution involving the retrofitting of a U.S. Government-owned Caterpillar 730 6x6 articulated truck chassis with a 6,000-gallon water tanker kit, including full installation, operator training, and all associated logistics. The water tanker must be constructed of heavy-duty carbon or mild steel plate with internal longitudinal and transverse baffles, equipped with a hydraulically driven centrifugal pump delivering 1,000 to 1,250 GPM and a comprehensive spray system featuring rear, side, and front spray bars, a remote-controlled water cannon, a hose reel, and manual nozzle. Delivery must occur within 60 days of award to Nellis Air Force Base, Nevada, under FOB Destination terms, with the vendor responsible for all transportation costs whether performing on-site installation or transporting the truck chassis to and from their certified facility for integration. The contract is anticipated to be awarded on a lowest-priced, technically acceptable basis, and respondents must submit a complete, all-inclusive quote for all three CLINs—tanker kit, installation, and training—or be deemed non-responsive. Mandatory submission requirements include SAM registration with a valid Unique Entity ID, CAGE code, detailed product specifications, payment and discount terms, and a proposed delivery schedule. Proposals must be submitted electronically via email to two designated points of contact by the deadline of July 16, 2026, at 1000 PDT, with offerors responsible for confirming receipt. The contract incorporates numerous FAR and DFARS clauses governing procurement integrity, payment processing via Wide Area WorkFlow and electronic reporting, Buy American requirements, restrictions on business with the Maduro regime and Xinjiang Uyghur Autonomous Region, and compliance with U.S. government installation access protocols. Acceptance is contingent upon rigorous leak and functional testing, demonstration of full system operations, submission of all required manuals, completion of operator training for the 801st RED HORSE Training Squadron, and provision of warranty registration documentation. The contract type is Firm Fixed Price, and all contractual obligations
FA4861 99 Cons Lgc

POSTED

3 days ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

NAICS: 541620
New
DIBBS
Hazardous Materials Compliance and Documentation
Environmental Consulting Services

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 561990
New
DIBBS
MIL-STD-129 Marking, Labeling, and Barcoding
All Other Support Services

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 561910
New
DIBBS
Military-Compliant Packaging and Preservation Services
Packaging and Labeling Services

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
Manufacture of Specialized Military SEAL Component
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 541511
New
DIBBS
Electronic Invoicing and WAWF Integration ServicesThe contract seeks support for electronic invoicing through the Wide Area WorkFlow system, requiring seamless integration with EDI and FTP submission protocols to facilitate automated invoice processing. The provider must ensure full connectivity with SAM.gov for vendor verification and DIBBS for accurate delivery documentation tracking, enabling end-to-end compliance with Department of Defense invoicing standards. This subcontract is designated as a Women-Owned Small Business Set-Aside under NAICS code 541511, which aligns with information technology and software development services geared toward government systems integration. The opportunity was posted on July 24, 2026, with a firm response deadline of July 29, 2026, and is managed by the Strategic Acquisition Program Directorate under the Department of Defense. Performance of the work is not tied to a specific location, allowing for remote or distributed execution, provided all technical and compliance requirements are met. All submissions must be completed through the Defense Logistics Agency’s DIBBS platform via the official solicitation link. The contract emphasizes secure, reliable, and timely data exchange between federal systems, with a focus on eliminating manual processes and enhancing accountability across the invoicing and delivery verification lifecycle.
Custom Computer Programming Services

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 423940
New
DIBBS
Supply Chain Management for Restricted MaterialsThe contract requires the procurement and certification of materials that are free of hexavalent chromium and ozone-depleting substances, with strict adherence to environmental compliance standards and full supply chain transparency. All suppliers must verify and document the absence of these restricted substances throughout the manufacturing and delivery process, ensuring alignment with federal environmental regulations and sustainability goals. Certification must be traceable to the raw material source, and subcontractors are expected to maintain robust documentation to support audit readiness and regulatory scrutiny. This is a subcontract under a Women-Owned Small Business Set-Aside, classified under NAICS code 423940, and issued by the Strategic Acquisition Program Directorate within the Department of Defense. The solicitation was posted on July 24, 2026, with a response deadline of July 29, 2026, and performance is expected to support defense-related procurement activities without specified geographic limitations. Compliance is non-negotiable, and failure to meet material restrictions or documentation requirements will result in rejection or contract termination.
Jewelry, Watch, Precious Stone, and Precious Metal Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance for Covered Contractor SystemsThe contract requires the implementation and ongoing maintenance of cybersecurity controls aligned with NIST SP 800-171 to ensure compliance with DFARS 252.204-7012 for all systems processing, storing, or transmitting Controlled Unclassified Information. This applies specifically to covered contractor systems under the Department of Defense, and the successful bidder must demonstrate the ability to establish, monitor, and sustain a robust security posture that meets federal requirements for protecting sensitive but unclassified data. Continuous compliance verification and documentation are expected throughout the contract period. This is a subcontract opportunity set aside exclusively for Women-Owned Small Businesses, with the North American Industry Classification System code 541512 indicating it targets computer systems design services. The solicitation was posted on July 24, 2026, with a firm response deadline of July 29, 2026. Performance is expected to support the Strategic Acquisition Program Directorate, and the work must be carried out in accordance with all applicable federal cybersecurity mandates without reliance on specific location-based requirements. All activities must be conducted to ensure full audit readiness and adherence to the security standards outlined in the referenced regulations.
Computer Systems Design Services

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 561910
New
DIBBS
Military-Compliant Packaging and Labeling ServicesThe contract requires the provision of packaging and labeling services for fluid filters in strict accordance with military standards, including full compliance with Defense Logistics Agency packaging requirements and proper handling of hazardous materials. All work must adhere to the specified regulatory frameworks to ensure safety, traceability, and operational readiness of the supplied components. The solicitation is set aside exclusively for Women-Owned Small Businesses, underscoring a commitment to diverse small business participation within the Department of Defense supply chain. The North American Industry Classification System code 561910 indicates the service falls under Other Support Activities for Transportation, and the performance location is not specified, implying flexibility or that it will be determined upon award. Responses are due by July 29, 2026, with the opportunity open for qualified WOSB entities to submit proposals through the DIBBS platform.
Packaging and Labeling Services

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332999
New
DIBBS
Manufacturing of 10-Micron Fluid Filter AssembliesThe contract specifies the fabrication and delivery of 849 units of NSN 2910014770840, a military-spec fluid filter with a 10-micron filtration element, subject to zero-defect quality standards and mandatory UID marking for traceability. All units must meet stringent defense specifications, ensuring reliability and compatibility in operational environments, with no tolerance for nonconformities. The work is solicited as a subcontract under a Women-Owned Small Business Set-Aside, classified under NAICS code 332999 for other fabricated metal product manufacturing, and is issued by the Strategic Acquisition Program Directorate within the Department of Defense. The solicitation was posted on July 24, 2026, with responses due by July 29, 2026, and performance is expected to be executed without restriction to a specific geographic location.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 331492
New
DIBBS
Supplier for Raw Materials and Specialty ComponentsThe contract seeks qualified suppliers to provide raw materials and specialty subcomponents compliant with military specifications for use in clutch disk assemblies, supporting multisource supply requirements to ensure continuity and redundancy in production. The materials required include friction materials and metal stampings, critical elements that must meet stringent defense standards for performance, durability, and reliability under extreme operating conditions. This subcontract is part of a broader effort by the Strategic Acquisition Program Directorate within the Department of Defense to secure reliable sources for components essential to defense systems. Proposals must be submitted by August 25, 2026, with the solicitation issued under the NAICS code 331492, which categorizes the industry as Other Finished Metal Product Manufacturing. There is no setaside designation, meaning all eligible companies may bid regardless of size or ownership structure. The place of performance and point of contact details are not specified, indicating flexibility in logistics and supplier location, though adherence to MIL-spec compliance and timely delivery remain paramount. Interested parties can access the full solicitation through the DIBBS portal using the provided link.
Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541330
New
DIBBS
Quality Assurance and Conformance TestingThe contract requires the performance of comprehensive quality assurance activities including in-process and final inspections, First Article Testing (FAT), and the issuance of Certificates of Conformance in strict alignment with Federal Acquisition Regulation 52.246-15 and Defense Logistics Agency specifications. All testing and inspection protocols must ensure full compliance with contractual and regulatory standards to confirm that delivered items meet required technical and performance criteria. The work under this subcontract is governed by NAICS code 541330 and is administered by the Strategic Acquisition Program Directorate within the Department of Defense. The contract is open for submission until August 25, 2026, and performance is expected to support defense acquisition objectives without geographic specification. Participation is subject to adherence to all DLA and federal quality assurance mandates, with no set-aside designation specified.
Engineering Services

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 484220
New
DIBBS
Supply Chain and Logistics ManagementThe contract supports supply chain and logistics management for order fulfillment and delivery to continental United States locations under FOB Destination terms, requiring full responsibility for transportation, risk, and final delivery to the designated destination. The contractor must ensure seamless integration with the Defense Logistics Agency’s ordering systems to maintain real-time visibility, accuracy, and responsiveness across the supply network. Surge capacity is a critical component, demanding the ability to rapidly scale operations during peak demand or emergency scenarios without compromising timelines or service levels. The work falls under NAICS code 484220, classifying it as truck transportation of freight, and is structured as a subcontract within the Department of Defense’s Strategic Acquisition Program Directorate. Proposals are due by August 25, 2026, with the solicitation posted on July 24, 2026, allowing potential offerors time to prepare detailed响应. While specific performance locations and points of contact are not detailed, the scope implies nationwide coverage across CONUS, necessitating robust infrastructure, reliable carriers, and proven experience in military logistics environments. Failure to meet delivery timelines or system integration requirements could disrupt mission-critical supply chains.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details