Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

FILTER ELEMENT, AIR CON

Active
SPE8E9-26-T-3213Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of eight air conditioning filter elements with NSN 4130012053774, issued under solicitation SPE8E9-26-T-3213 by the Department of Defense through DLA Troop Support. The supplier must deliver the items FOB origin with no variance in quantity, and inspection and acceptance will occur at the destination. The delivery timeline requires shipment no later than January 18, 2027, with an original required delivery date of November 14, 2026, and a total contract value of $64.00 at $8.00 per unit. Packaging must comply with MIL-STD-2073-1E, including specified preservation methods and unit container codes, and all marking must follow MIL-STD-129K, with MIL-L-61002 requirements waived. Plastics are to be avoided in wrapping, cushioning, or dunnage where possible. The item is subject to strict restrictions on mercury and mercury-containing compounds, which are prohibited unless functionally necessary in specific applications like batteries or instruments, and even then must have dual containment per NAVSEA 5100-003D. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced electronically, and the contract includes controlled information provisions. All shipments must be addressed to the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation instructions are detailed in DLAD procedural notes.

General Info

Procure eight air conditioning filters, NSN 4130012053774, deliver by Jan 18, 2027, FOB origin, $8 each, per MIL-STD packaging and mercury restrictions.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC IView Agency

NAICS

333310 - Commercial and Service Industry Machinery ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE8E9-26-T-3213.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
View Agency Profile
Office AddressUS
Contacts
Matthew Kruc
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
FILTER ELEMENT,AIR CONDITIONING
FILTER ELEMENT,AIR CONDITIONING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
TRION INC
SANFORD, NC
DLA TROOP SUPPORT DOES NOT CURRENTLY HAVE AN APPROVED
TECHNICAL DATA PACKAGE AVAILABLE FOR THIS NSN.
PLEASE DO NOT SUBMIT REQUEST TO DLA TROOP SUPPORT TECHNICAL DATA SUPPORT
TEAM.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
AIR SYSTEMS COMPONENTS INC 95802 P/N 320832-002
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017586138 0001 EA 8.000
NSN/MATERIAL:4130012053774
DELIVERY (IN DAYS):0167
SPE8E9-26-T-3213
SECTION B
PR: 7017586138 PRLI: 0001 CONT’D
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:D3 OPI:O
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
WHENEVER POSSIBLE AND PERMITTED BY THE
TERMS OF THE CONTRACT, AVOID THE USE OF
PLASTICS AS WRAPPING, CUSHIONING, OR
DUNNAGE MATERIALS.
DLA TROOP SUPPORT HAS WAIVED THE REQUIREMENTS OF
MIL-L-61002 AS CITED IN MIL-STD-129L,
MILITARY STANDARD, MARKING FOR SHIPMENT
AND STORAGE. MIL-STD-129K REQUIREMENTS
SHALL BE SUBSTITUTED IN PLACE OF MIL-L-61002
REQUIREMENTS. EXCEPT FOR THE WAIVER OF
MIL-L-61002 REQUIREMENTS, ALL OTHER
MIL-STD-129L REQUIREMENTS SHALL APPLY.
END OF MARKING WAIVER.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/18/2027 Original Required Delivery Date:11/14/2026
SPE8E9-26-T-3213 NSN/Part Number: 4130-01-205-3774 Quantity: 8 EA Purchase Request: 7017586138QTY: 8 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333310
New
DIBBS
WRENCH, INLET FITTINThe contract pertains to the procurement of three wrenches for water inlet fittings, identified by NSN 4921-00-928-4081, with a delivery requirement of 20 days after award. The solicitation, issued under number SPE7M4-26-T-273E by the Defense Logistics Agency’s Fluid Handling Division, has a response deadline of August 3, 2026, and is classified as a federal procurement under NAICS code 333310. The item is subject to strict export control regulations under either ITAR or EAR, meaning any technical data associated with it cannot be disclosed to foreign persons, regardless of location, without prior authorization from the Department of State or Commerce. This restriction extends to foreign national employees and subsidiaries of U.S. companies. Access to the controlled technical data is limited exclusively to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and the DLA questionnaire, and have received formal approval from the DLA authority. The place of performance is Keyport, Washington, with Rory O’Reilly listed as the primary point of contact for inquiries.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
ADAPTER, VENT PLUGThe item specified is an ADAPTER, VENT PLUG with NSN 4921-00-435-8098, for a quantity of four units, under purchase request 7017574011, with a delivery requirement of 20 days ADO. Manufacturing may involve casting or forging processes requiring specialized tooling that the government does not possess, necessitating contractors to submit a Casting and Forging Assistance Request through the DLA portal or designated email for support with materials and tooling. The technical data associated with this item is subject to export controls under either ITAR or EAR, restricting any disclosure or transfer of data to foreign persons, including foreign nationals within the U.S. or abroad, and applies to all entities regardless of nationality or location. Compliance with DFARS 252.225-7048 is mandatory, and access to this controlled data is restricted to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed required DOD export control training, and have received explicit approval from the DLA controlling authority. The solicitation is issued under contract number SPE7M4-26-T-273F, posted on July 22, 2026, with a response deadline of August 3, 2026, under NAICS code 333310. Performance is required at KEYPORT, WA, 98345-7610, and inquiries should be directed to Rory O’Reilly at the provided contact details.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
COUPLER, DIGITAL DATAThe item being procured is a digital data coupler with NSN 7025-01-349-6128, quantity of 44 units, under solicitation SPE8EN-26-T-2645, with a response deadline of August 3, 2026, and a delivery schedule of 313 days after contract award. This is a total small business set-aside under NAICS code 333310, managed by the Department of Defense through the Construction & Equipment T & IFO EQ office. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. The item is subject to export controls under ITAR or EAR, prohibiting any disclosure of associated technical data to foreign persons without prior authorization from the Department of State or Commerce, including to foreign national employees and subsidiaries, with DFARS 252.225-7048 fully applicable. Access to this controlled data is restricted to DLA contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and approved the DLA Export-Controlled Technical Data Questionnaire. Packaging must meet DLA specifications, and inspection and acceptance occur at origin; non-accepted supplies must have all government identification removed. Delivery is to New Cumberland, Pennsylvania, 17070-5002, with primary point of contact Jennifer Esworthy via email and phone provided.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
KEYBOARD, DATA ENTRYThis contract pertains to the procurement of a single keyboard for data entry, identified by NSN 7025-01-521-7483, under purchase request 7017585451, with delivery required within 81 days after order. The solicitation, numbered SPE8EN-26-T-2675, was posted on July 22, 2026, with responses due by August 3, 2026, and falls under NAICS code 333310 for office machinery and equipment manufacturing. It is a federal procurement managed by the Department of Defense through the Construction & Equipment T & IFO EQ office, with performance designated to Tracy, California, 95304-5000. The contract incorporates all applicable technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the solicitation issue or award date depending on acquisition size. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical analysis reagents approved by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shock-proof and feature a secondary containment boundary in compliance with NAVSEA 5100-003D. Documentation requirements for source approval and handling of covered defense information apply, and government identification must be removed from non-accepted supplies. Primary point of contact for inquiries is Jennifer Esworthy, with email and phone provided for correspondence.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
STRAP, GROUNDThe contract specifies the procurement of five ground straps identified by NSN 4921-00-042-4437 under solicitation SPE7M4-26-T-273C, with a required delivery within 20 days of award and FOB origin terms. The item is classified as a critical application item and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, including configuration change management protocols and prohibition of intentional mercury or mercury-containing compounds unless specifically exempted for functional uses in batteries, fluorescent lights, sensors, weapon systems, or approved chemical reagents; mercury-containing portable devices must include shockproof construction and a secondary containment boundary as per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E with preservation method 31, class E5 unit containers, and marking in accordance with MIL-STD-129 without special codes. The straps must be shipped via traceable freight to the Naval Undersea Warfare Center Division Keyport, with no use of parcel post permitted. The contract mandates full and open competition, zero quantity variance, and inspection and acceptance at the destination. Technical documentation references two drawings from February 7, 1966, and the unit of issue is each, with a total contract value of $25.00. The original required delivery date is July 20, 2026, and responses are due by August 3, 2026, with point of contact Rory O’Reilly at DLA.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
PLATE, IDENTIFICATIOThe contract pertains to the procurement of one identification plate with NSN 2590-01-728-2447 under solicitation SPE7L1-26-T-862S, issued by the Department of Defense’s Land Supply Chain. Delivery is required within five days of award, with shipment FOB origin and no tolerance for quantity variance. The item must conform to specific technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, and any deviations require formal engineering change proposals or variance requests. Ozone-depleting chemicals are strictly prohibited, and substitute materials must be pre-approved unless explicitly authorized by the specification. Packaging must adhere to MIL-STD-2073-1E, marking to MIL-STD-129, and palletization to DLA packaging requirements. The delivery destination is a designated DLA facility in Columbus, Ohio, with shipment required via traceable freight methods—parcel post is prohibited. The product must be manufactured in accordance with referenced drawings and revisions dated up to April 2026, and the supplier must provide a Certificate of Conformance unless waived by a Quality Assurance Letter of Instruction. Full and open competition applies, and the contract is governed under FAR provisions with no set-aside restrictions. The point of contact for inquiries is Kristina Derry, with the response deadline set for August 3, 2026.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
CHAIR, TRANSFER AT SEAThe contract is for the procurement of 16 units of a chair designed for transfer at sea, identified by NSN 4220-00-369-4531, under solicitation SPE8E6-26-T-3786. The requirement is set aside exclusively for small businesses as defined by the SBA, with a NAICS code of 333310 for motor vehicle parts and accessories manufacturing. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026, and delivery must be completed within 189 days after award. Performance is to occur in Tracy, California, with John Lieb listed as the primary point of contact for inquiries. The item is subject to strict cybersecurity and export control requirements. The supplier must be certified as a CMMC Level 2 C3PAO and comply with DLA’s technical and quality standards referenced from the DLA Master List. Technical data associated with the chair is controlled under ITAR or EAR, restricting disclosure to foreign persons without prior government authorization. Only contractors approved by DLA—including those with a valid US/Canada Joint Certification Program certification, completed export control training, and approved questionnaire responses—are permitted to handle the data. Packaging must meet DLA standards, government identification must be removed from non-accepted items, and the product has no shelf life constraint. The material is classified as covered defense information under RD002.
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
FITTING, VACUUM SOCK
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
FIXTURE ASSEMBLY
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
AIR CAP, SPRAY GUNThe contract specifies the procurement of five air caps for spray guns with NSN 4940-00-236-4287 and part number AV439-58 from Illinois Tool Works Inc. The item must be delivered within 20 days to the ROKAF LC Consolidated Supply Depot in Seosan, South Korea, under FOB origin terms, with no tolerance for quantity variation. All supplies must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods, wrapping materials, and unit container requirements, and must be marked in accordance with MIL-STD-129 with no special marking codes. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. The contract is issued under solicitation SPE7M4-26-T-273V with a response deadline of August 3, 2026, and a required delivery date of July 27, 2026. The unit price is $5.00 per item for a total of $25.00, and the DoD authorized unit of issue is each. Transportation logistics follow DLA procedures, and delivery must be coordinated through designated freight forwarders as outlined in DLA Procurement Notes C19 and C20. All packaging and palletization must adhere to DLA packaging requirements, and the point of inspection and acceptance is at the origin. Special Government use codes and distribution identifiers are provided for internal processing.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
FILTER, LINT BAG
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
ADAPTER, SWITCH
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Same awarding agency

NAICS: 326113
New
DIBBS
PLASTIC SHEETThe contract is for the procurement of 13 shipping units of clear acrylic plastic sheeting measuring 60 inches long by 36 inches wide and 0.750 inches thick, identified by NSN 9330-00-483-3433. The product must meet the technical specifications of MIL-PRF-5425E Revision E dated August 22, 2019, and be sourced from a manufacturer already approved on the Qualified Products List at the time of contract award. The sheeting is classified as a critical application item and must comply with all DLA packaging and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the product, except for specific permitted uses such as batteries, fluorescent lighting, instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA; any portable lamps or instruments containing mercury must be shockproof and feature a secondary containment barrier as per NAVSEA 5100-003D. Delivery is required FOB origin within 167 days of contract award, with an original delivery date of December 3, 2026, and a needed ship date of January 18, 2027. The quantity is fixed with zero variance allowed. Packaging must adhere to MIL-STD-2073-1E and DLA’s packaging requirements, avoiding plastic as wrapping, cushioning, or dunnage whenever possible. Marking shall conform to MIL-STD-129 with no special marking code applied. All shipments must be palletized in accordance with DLA standards and sent to the designated delivery address in New Cumberland, Pennsylvania. Inspection and acceptance occur at the destination. The contract is governed under solicitation SPE8E9-26-T-3199, with a response deadline of August 3, 2026, and is issued under NAICS code 326113. Point of contact for inquiries is Matthew Kruc, DLA.
Unlaminated Plastics Film and Sheet (except Packaging) Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
CARTRIDGE, DEHYDRATORThe contract is for a dehydrator cartridge designed for use with refrigerant 134A, with a required quantity of 612 units to be delivered within 177 days from the contract award date, with delivery point at the origin and inspection and acceptance occurring at the destination. The item is classified as a critical application item with a non-extendable 24-month shelf life under Type I (Code M) requirements, and it must comply strictly with MIL-STD-2073-1E packaging standards, including specified preservation methods, materials, and packing codes. All packaging and marking must adhere to MIL-STD-129 with special marking code 24 indicating open availability for inspection or use, and palletization must follow DLA packaging requirements. Mercury or mercury-containing compounds are strictly prohibited in or on the item except for limited functional uses approved by NAVSEA, and portable devices containing mercury must have shockproof construction and secondary containment. The item is subject to comprehensive technical and quality requirements referenced from the DLA Master List, and covered defense information applies. Export control and hazardous materials shipping regulations must be followed per IP025 and DLAD procedural notes. The delivery destination is specified with a parcel post address in Tracy, California, and the required ship date is July 22, 2026, with the original delivery deadline set for May 12, 2027. The NSN is 4440013984573, and the contract identifies multiple qualified suppliers with their respective part numbers.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FILTER, AIR, ELECTROSTATThis contract specifies the procurement of an electrostatic air filter with NSN 4460013113732 and part number 441076-001, supplied by AIR SYSTEMS COMPONENTS INC, under solicitation SPE8E9-26-T-3219. Six units are required at a unit price of $6.00, with total contract value of $36.00, delivered FOB origin within 167 days from the contract date. All deliveries must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, with no special marking applicable. Packaging must adhere to DLA’s procurement guidelines and be palletized per RP001, with shipments directed to DLA Distribution Jacksonville at the specified address. The filter is designated as a critical application item and must not contain or come into direct contact with mercury or mercury-containing compounds, except for authorized exceptions such as functional mercury in batteries, fluorescent lamps, sensors, or chemical reagents specified by NAVSEA, with portable mercury-containing devices requiring shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. The solicitation is a total small business set-aside under NAICS code 333413, with responses due by August 3, 2026, and quality and technical requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in RQ and RD identifiers. Inspection and acceptance occur at the destination, with zero variance permitted in quantity, and transportation protocols follow DLAD Proc Notes C19 and C20.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334610
New
DIBBS
CARTRIDGE, TONERThis contract is for the procurement of toner cartridges identified by NSN 7045-01-643-9438 and part number 70C0HCG, supplied by Lexmark Intl Inc Federal Sales Division, under solicitation SPE8E9-26-T-3236. A total of 93 units are required at a unit price of $93.00, for a total contract value of $8,649.00, with delivery due 31 days after award, no later than December 20, 2026. All items must be delivered FOB origin, with zero variance allowed in quantity, and are subject to inspection and acceptance at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, container codes, and marking per MIL-STD-129 with no special marking required. The delivery destination is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, and transportation protocols are governed by DLAD Proc Notes C19 and C20. The contract incorporates DLA's Master List of Technical and Quality Requirements, with all referenced technical standards being applicable unless otherwise modified by solicitation amendments. Mercury or mercury-containing compounds are strictly prohibited in the toner cartridges or their components, except for functional uses in batteries, fluorescent lamps, sensors, or specialized instruments as defined by NAVSEA, with portable devices containing mercury required to have shockproof construction and a secondary containment barrier. The contract also notes that no approved technical data package is currently available from DLA Troop Support for this NSN, and suppliers are instructed not to request one. Unit of issue is EA, consistent with DoD standards, and the item falls under NAICS code 334610. The contract is subject to Covered Defense Information requirements, and all submissions must adhere to federal procurement protocols through the DLA eProcurement system.
Manufacturing and Reproducing Magnetic and Optical Media

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
DEHYDRATOR UNIT, NONThe item is a nonreactivating dehydrator unit, also known as a desiccator assembly, measuring 3.630 inches in length, comprised of a cover, screw cap, and connecting tube. The desiccant used must be blue, Type IV, Grade H, conforming to MIL-D-3716 specifications. The procurement is governed by the Defense Logistics Agency’s packaging requirements and is subject to Cybersecurity Maturity Model Certification Level 2 compliance, requiring the vendor to be a certified third-party assessment organization. Technical data associated with this item is controlled under export regulations, either ITAR or EAR, and its disclosure to foreign persons, regardless of location, is strictly prohibited without prior authorization from the U.S. Department of State or Department of Commerce. DFARS 252.225-7048 applies, and access to this data is restricted solely to DLA contractors with approved U.S./Canada Joint Certification Program status, who have completed mandatory training and the DLA export-controlled data questionnaire. The item’s NSN is 4440-00-858-6010, with a quantity of nine units included in Purchase Request 7017585208. Delivery is due within 167 days after award. The solicitation number is SPE8E9-26-T-3207, with a response deadline of August 3, 2026, and the procurement falls under NAICS code 333415. The contracting office is the Department of Defense’s Construction & Equipment MRO Service I, with performance located at Tinker Air Force Base, 73145-8000. Primary point of contact is Matthew Kruc, reachable via email and phone.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326113
New
DIBBS
PLASTIC SHEETThe contract calls for the procurement of plastic sheets made of cellulose acetate, compliant with specification L-P-504, Type 1, characterized by a clear, high polish finish, with nominal dimensions of 20.000 inches in width, 0.060 inches in thickness, and 50.000 inches in length. Each sheet must be packaged in containers marked with the instruction “STORE FLAT KEEP COOL AND DRY” on at least one side and wherever practicable on two opposite sides. The material is identified by NSN 9330-00-202-3642 and is being procured under solicitation SPE8E9-26-T-3198 for a total quantity of 111 sheets, with a purchase request number of 7017585375 and a delivery deadline of 84 days after order. Packaging and labeling requirements adhere strictly to government standards, including the mandatory removal of any government identification from non-accepted supplies. All sampling and quality verification must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan unless otherwise directed. Critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, or with AQLs of 0.1, 1.0, and 4.0; unspecified attributes are treated as major. The manufacturer may elect either attribute or variable inspection under MIL-STD-1916 unless the contract specifies otherwise. MIL-STD-105/ASQ Z1.4 may determine sample size but acceptance requires zero non-conformances. The product must also comply with MIL-STD-130N for identification marking of U.S. military property. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026, under NAICS code 326113, issued by the Department of Defense under the Construction & Equipment MRO SVC I office, with performance location at Robins AFB, Georgia, and primary point of contact Matthew Kruc.
Unlaminated Plastics Film and Sheet (except Packaging) Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339950
New
DIBBS
PLATE, IDENTIFICATIOHamilton Sundstrand Corporation, identified by CAGE code 99167, is contracted to supply identification plates with part number 745184-7 under solicitation SPE8E9-26-T-3235, with a total quantity of 64 units at a unit price of $64.00, resulting in a total contract value of $4,096.00. The item is designated by NSN 9905-01-672-4912 and must be delivered FOB origin within 167 days of contract award, with the original required delivery date set for March 22, 2027, and a needed ship date of January 18, 2027. Inspection and acceptance both occur at the destination, and no quantity variance is permitted. The supplier must comply with all DLA Master List of Technical and Quality Requirements, which override any conflicting standards, including ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow RP001 DLA Packaging Requirements. All packaging must also meet the Unit of Issue and Quantity per Unit Pack as specified in the contract. Delivery is directed to DLA Distribution Depot Hill at Hill AFB, Utah, via the freight shipping address provided, with transportation governed by DLAD Proc Notes C19 and C20. The contract references multiple technical and quality control codes, including RD003 regarding Covered Defense Information, and requires documentation for source approval per RC001. The supplier must also remove government identification from non-accepted supplies per RQ011. All applicable requirements are controlled by the version of the DLA Master List in effect on the solicitation issue date.
Sign Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
BINDER, LOADThis contract issued by the Defense Logistics Agency under solicitation SPE8E9-26-T-3214 requires the procurement of 508 units of a binder, load item identified by NSN 3990-01-479-0538 and part number 12421708, with a unit price of $508.00 and a total contract value of $258,064.00. Delivery must be completed within 221 days of award, with FOB origin terms, inspection and acceptance occurring at destination, and no quantity variance allowed. The item must be packaged per ASTM D3951, with all labeling and marking strictly following MIL-STD-129, and palletization in compliance with DLA packaging requirements. Technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements take precedence over any general packaging standards. The procurement is set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 333998, with the primary point of contact being Matthew Kruc at DLA. The item is designated as a critical application and potentially involves covered defense information. The forging process is specified for manufacturing, and specific approved sources include BAE Systems, W.H. Smith Hardware, AMZ Alabama, Buffers USA, and The Crosby Group. Ship date is March 13, 2027, with original delivery required by April 22, 2027. All shipments must be directed to the DLA Distribution facility in New Cumberland, Pennsylvania, following DLA transportation protocol C19 for freight and C20 for first destination.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331491
New
DIBBS
SHEET, METALThis contract specifies the procurement of aluminum alloy sheet metal with precise technical and quality requirements, including a thickness of 0.063 inches, width of 48 inches, length of 96 inches, and a weight of approximately 28.16 pounds per sheet. The material must conform to alloy 5052 in temper H32 and meet specifications SAE AMS-QQ-A-250/24C, ASTM B666/B666M-20, and ASTM B660-23, with full compliance to the referenced Technical Data Package revisions. All sheets must be supplied in whole-foot lengths only, with no test coupons permitted, and must bear continuous identification markings including the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and exact dimensions. A Certificate of Quality Compliance with mill materials certification is mandatory for every shipment and must be submitted to both the customer and the DLA Troop Support Contracting Officer. Markings must be applied via stamping or stenciling, using waterproof, non-contaminating fluids, and must remain legible under normal handling; adhesive labels are required for small bars, tubes, and shapes under 0.250 inches in nominal OD. Compliance with MIL-STD-129 and MIL-STD-2073-1E packaging standards is required, including Level A preservation per ASTM B660 and special marking instructions where applicable. The Qualified Suppliers List for Distributors (QSLD) is strictly enforced, and only suppliers listed on the QSLD are eligible to respond; any deviation must be explicitly noted and may result in rejection or criminal penalties for unauthorized substitution. Delivery is FOB origin, with no quantity variance allowed, inspection and acceptance occurring at destination, within 17 days of order placement, to the designated DLA distribution facility in New Cumberland, PA. The original required delivery date is December 7, 2026, with a need ship date of August 21, 2026.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
RUBBER SHEET, SOLIDThe contract specifies the procurement of a solid rubber sheet measuring 36 inches square and 0.063 inch thick, with a Shore Durometer range of 45.0 minimum to 55.0 maximum, smooth on both sides, and manufactured from synthetic rubber. The item is classified as a Type I shelf-life item with a 12-month lifespan, requiring at least 85% of that shelf life to remain at time of delivery, and all cure and expiration dates must be clearly marked per MIL-STD-129 in calendar quarter and year format. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced via R or I numbers, and sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances allowed unless otherwise stated in the contract. Attributes are classified with verification levels or AQLs, and unspecified attributes are deemed major. Mercury and mercury-containing compounds are prohibited unless exceptions apply for specific functional uses outlined in NAVSEA 5100-003D, and any portable devices containing mercury must have shockproof construction with a secondary containment barrier. The rubber sheet must be free of asbestos as defined in FED-STD-313. Markings are required every three feet with the specification number, revision letter, type, and class, along with the quarter and year of cure or manufacture, following MIL-STD-190 for performance, legibility, color, and environmental resistance. The contractor must certify understanding of bare item markings prior to award. The item, identified by NSN 9320-00-641-3051, is procured competitively under a military specification with a single unit quantity, a 20-day delivery window from award, and is managed by the Department of Defense under contract SPE8E9-26-T-3238.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FAN, TUBEAXIALThe contract specifies the procurement of a tube axial fan with NSN 4140011636009 and part number 033037000 from ROTRON INCORPORATED, for a quantity of nine units, under solicitation SPE8E9-26-T-3215. Delivery is required within 215 days from the contract award, FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special codes, and palletization as specified. The item is subject to critical application standards and covered defense information protocols. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses like batteries, fluorescent lamps, or specialized instruments, and where allowed, must include a secondary containment barrier in accordance with NAVSEA 5100-003D. Bare items must be marked with the contract number, NAWC CAGE, and part number unless overridden by technical drawings. Traceability to NAVAIR aircraft launch and recovery equipment standards applies, and all materials must conform to the DLA Master List of Technical and Quality Requirements referenced in the contract. The unit of issue is each, priced per unit, with total value derived from the fixed quantity.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
SOUND MAT, FANThe contract is for the procurement of 26 units of a SOUND MAT, FAN with NSN 4140-01-165-8860 and part number FF12983, supplied by FM AF, LLC under purchase request 7017586198. The item is designated as a critical application component for the Super Quiet Joy Model AVR 190-150D2423, and delivery is required FOB origin within 167 days of contract award, with a firm delivery date of February 4, 2027 and an original ship date of January 18, 2027. The unit of issue is each (EA) at a fixed price of $26.00 per unit, with no variance allowed in quantity. All deliveries must comply with MIL-STD-2073-1E packaging standards, with specific packaging methods defined, and marking must conform to MIL-STD-129K, replacing MIL-L-61002 requirements as waived by DLA Troop Support. Plastic materials for wrapping, cushioning, or dunnage are to be avoided whenever contractually feasible. The delivery address is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, PA, and transportation requirements are governed by DLAD Proc Notes C19 and C20. Technical and quality requirements are referenced from the DLA Master List, and all documentation must satisfy the SAR and procurement standards outlined in RC001, RP001, and RA001. The solicitation number is SPE8E9-26-T-3217, issued under NAICS code 333413 by the Department of Defense, with point of contact Matthew Kruc.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details