Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Final Inspection and Compliance Verification

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for independent verification that a delivered vehicle fully complies with all specified technical requirements, including seating capacity, payload capacity, safety systems, exterior color, inclusion of a spare tire, and overall roadworthiness, prior to formal acceptance. This inspection must be conducted by a qualified third party to ensure objective confirmation that the vehicle meets the exact standards outlined by the US Embassy Kuala Lumpur, with no deviations permitted before acceptance. The opportunity is classified as a subcontract under NAICS code 541330 and is issued by the Department of State through the US Embassy in Kuala Lumpur, with performance required at the embassy’s location in Kuala Lumpur. The solicitation was posted on August 4, 2026, and responses must be submitted no later than September 12, 2026, at 4:00 AM UTC. Although no point of contact or set-aside details are provided, the emphasis on precise technical verification underscores the importance of compliance with diplomatic and operational vehicle standards.

General Info

Third-party verification required for vehicle compliance with US Embassy Kuala Lumpur technical specs by September 12, 2026.

Agency

Department Of State → US Embassy Kuala LumpurView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Kuala Lumpur, MY-14, MYS

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of State → US Embassy Kuala Lumpur
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of State → US Embassy Kuala Lumpur
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Independent verification that the delivered vehicle meets all technical specifications including seating, payload, safety systems, color, spare tire, and roadworthiness prior to acceptance.

Similar Contracts

Same NAICS industry code

NAICS: 541330
New
DIBBS
Defense Telecommunications Equipment ScreeningThe contract seeks technical review and certification services to ensure that telecommunications equipment supplied under the agreement complies with DFARS 252.204-7016 and Section 889 of the National Defense Authorization Act, which prohibit the use of equipment from foreign adversaries. The vendor must verify that all telecommunications products do not originate from or contain components sourced from entities designated as covered foreign adversaries, such as Huawei, ZTE, and other specified organizations, to safeguard national security interests. Compliance requires thorough documentation, supply chain tracing, and formal attestation confirming adherence to federal regulations governing the procurement of secure telecommunications infrastructure. The subcontract is issued by the ASC Commodities Division under the Department of Defense with a NAICS code of 541330, indicating it pertains to other scientific and technical consulting services. The opportunity was posted on August 4, 2026, and responses are due by August 19, 2026. The place of performance and specific agency location are not detailed, but the work is expected to support defense-related telecommunications systems. All proposers must demonstrate capability to conduct rigorous technical evaluations and provide legally defensible certification statements. The contract is open for bidding through the DIBBS platform and does not include any set-aside provisions for specific business categories.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 15 days
View Details
NAICS: 541330
New
SLED
Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services under an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract to support major construction projects across various phases including planning, design, construction, and closeout. These services will encompass a range of delivery methods such as Design Build, Progressive Design Build, and other alternative project delivery formats, with the primary goal of ensuring projects adhere to authorized schedules, budgets, and quality standards. The contract is intended to streamline oversight and coordination for the Port’s extensive capital improvement initiatives, requiring technical expertise in managing complex infrastructure developments. Primary point of contact for this opportunity is Hala Rabbo, who can be reached via email or phone, with additional support available from Project Manager Ann Davidson. The solicitation is classified under NAICS code 541330, which designates architectural, engineering, and related services. Although the contract is currently posted as a forecast with no official solicitation number or set-aside details, interested parties are encouraged to monitor the provided UI link for updates and future formal solicitations. The performance location will be at various Port of Seattle facilities and project sites, with no specific city or state specified in the metadata, indicating broad geographic scope across Port operations.
Construction Management

POSTED

about 9 hours ago

DEADLINE

N/A
View Details
NAICS: 541330
New
SEEKING QUALIFIED SUBCONSULTANTS IN RIVERSIDE COUNTY/SOCAL TO SUPPORT WELL REPLACEMENT PROJECT WITH WATER DISTRICT
Solicitation # seeking-qualified-subconsultants-riverside-countysocal-support-well-replacement-project-water
GHD Inc. is inviting qualified firms including Disadvantaged Business Enterprises, Small Business Enterprises, Women-Owned Business Enterprises, and Minority-Owned Business Enterprises to submit qualifications for participation in the Corydon Well Replacement Design Project in Riverside County, California, on behalf of the Elsinore Valley Municipal Water District. The scope of work encompasses a broad range of professional services such as engineering, environmental assessment, surveying, geotechnical analysis, permitting, public outreach, and utility location, with applicable NAICS codes covering architecture and engineering, construction, and related consulting activities. The solicitation is targeted toward small and disadvantaged businesses under SBA set-aside categories including Small Business, Small Disadvantaged Business, Women-Owned Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business, with additional alignment to DBE requirements under the Department of Transportation guidelines. Interested firms must contact Charlie Brown at charles.brown@ghd.com by August 7, 2026, to request solicitation materials and submit their qualifications, with all submissions due no later than 5 p.m. PST on August 14, 2026, and the final proposal deadline set for September 15, 2026.
GHD Inc.

POSTED

about 9 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541330
New
Engineering Design Services
Solicitation # TPJCC Engineering Design Services 26-17
The contract is a solicitation for engineering design services to install a Viking Norsafe E-60 Conventional Lifeboat Davit on Pier 7 at the Tongue Point Job Corps Center in Astoria, Oregon, operated by Management & Training Corporation (MTC). The work requires a Professional Engineer with a valid license to produce signed and stamped engineering drawings, structural calculations, material specifications, and a bill of materials, along with electronic PDF copies and one full-size drawing set. All deliverables must meet MTC’s specifications and be of merchantable quality, free from defects, and constructed with good workmanship. The contract is a fee-for-service subcontracting opportunity under NAICS Code 541330 for engineering services, with a size standard of $9 million in annual revenue. It is set aside for small business categories including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business, and all subcontractors must self-certify their eligibility under FAR 52.219-8 and obtain a Unique Entity Identifier and Taxpayer Identification Number. The solicitation requires submission via email to Elizabeth Williamson by 2:00 PM PST on August 6, 2024, and mandates inclusion of a completed bid sheet, W-9, Self-Certification Form, and Acceptance of Terms & Conditions. Invoices must reference the purchase order number, service dates, itemized pricing with extended unit costs and totals, and include an invoice number and date, and payment is contingent upon delivery and acceptance of services. The contractor is obligated to indemnify MTC for all liabilities arising from performance, negligence, or contract breach, and must comply with labor standards including the Federal Contractor Minimum Wage and Wage Determination SCA WD 2015-5577 Rev. 28. Contractors and subcontractors must adhere to federal data protection requirements, including encryption and one-hour reporting of any privacy breaches involving personally identifiable information, and are prohibited from retaining or disseminating data covered under the Privacy Act or FOIA exemptions. The contract is subject to FFATA reporting if the value exceeds $40,000, and first-tier subcontractors over $30,000 must disclose debarment status. Insurance is not required, but MTC retains inspection rights at all reasonable times, and the contract may be terminated with 30 days' written notice or immediately if government funding
Tongue Point Job Corps

POSTED

about 9 hours ago

DEADLINE

in about 23 hours
View Details
NAICS: 541330
New
Corydon Well Replacement (C2305)
Solicitation # C2305
Ardurra Group, Inc. is soliciting proposals from Disadvantaged Business Enterprise (DBE) firms for professional design, bidding support, and engineering services during construction for the Corydon Well Replacement Project in California, under solicitation number corydon-well-replacement-c2305-1. The project involves designing a new municipal groundwater production well to replace and decommission the existing Corydon well, with work divided into two phases: Phase 1 focuses on technical specifications, civil site design, and line-bid items for drilling and abandonment, including full-time on-site construction management oversight in compliance with Riverside County and California State Water Resources Control Board standards; Phase 2 covers detailed design of architectural, structural, mechanical, electrical, and instrumentation systems for equipping, testing, and commissioning the new well. Key deliverables include a Preliminary Design Report at 30% design completeness, review of up to 200 shop drawings and material submittals, assistance with the Domestic Water Supply Permit Amendment, and development of record drawings reflecting field changes. The design must adhere to AWWA standards for a 24-inch stainless steel Ful-Flo louvered screen, match existing vertical turbine pump applications, and tie discharge piping into the Corydon Blend station and Malaga blending location. The contract is set aside for small businesses including SB, SDB, WOSB, VOSB, SDVOSB, and DBE entities under SBA programs, and requires full compliance with Buy America and Build America Buy America Act provisions, including domestic content certifications and waiver procedures for non-compliant materials. Proposals must include detailed cost breakdowns by task, hourly rates, travel, and incidental charges, with a total estimated project cost of $2,260,788, though the final professional services fee is subject to negotiation. Evaluation is weighted with 25% each for relevant qualifications and understanding of the project, 20% for schedule and scope clarity, 10% for innovation, 10% for cost value, and 10% for overall proposal quality, with award based on demonstrated competence rather than lowest price. Required submissions include certifications for debarment, lobbying, American Iron and Steel compliance, Executive Order N-6-22, conflict of interest, insurance, public works registration, and detailed DBE subconsultant information. All proposals must be submitted via EVMWD’s PlanetBids portal by 10:00 a.m.
Ardurra Group, Inc.

POSTED

about 9 hours ago

DEADLINE

in 28 days
View Details
NAICS: 541330
New
Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction
Solicitation # WO# C2305
The Corydon Well Replacement Project involves the design and construction support for a new municipal groundwater production well to replace and permanently abandon the existing Corydon Well, located on Elsinore Valley Municipal Water District property in California. The scope encompasses comprehensive engineering services across two phases: Phase 1 includes hydrogeological evaluation, aquifer analysis, well design aligned with AWWA standards, civil and mechanical site planning, wellhead and facility design, bidding assistance, and full-time construction management with hydrogeological oversight during drilling; Phase 2 covers detailed architectural, structural, electrical, mechanical, and instrumentation and controls design for well equipping, testing, and commissioning, along with continued engineering support during construction. All work must comply with Riverside County and California State Water Resources Control Board regulations, including proper casing depth, sanitary seal placement, and abandonment protocols. The project is subject to the Buy America Act and Build America, Buy America requirements, mandating domestic sourcing of iron, steel, and manufactured products, with certification and documentation requirements enforced through subcontracts exceeding $150,000. The project is funded partially by a $400,000 Bureau of Reclamation grant, with the remainder covered by non-federal sources, necessitating full compliance with 2 CFR Part 200, including audit rights, debarment and suspension checks, and lobbying restrictions. Proposals must include detailed cost breakdowns by task, hourly rates, travel, and incidental charges, capped at a not-to-exceed amount of $1,000,000. Evaluation prioritizes demonstrated qualifications and experience in municipal groundwater projects, technical understanding of the scope, realistic scheduling, innovation, and overall proposal quality, with cost being a secondary consideration. All respondents must provide certifications for non-collusion, American Iron and Steel compliance, debarment/suspension status via SAM, DBE participation, public works registration, insurance acknowledgment, and Executive Order N-6-22 compliance, along with resumes of key personnel and proof of California professional licensure. Work is scheduled to begin in November 2026 and conclude by May 2028, with monthly invoicing and progress reporting required, subject to 45-day payment terms. Subconsultants must be certified and disclosed, and the project emphasizes outreach to small, disadvantaged, women-owned, and minority-owned businesses. Proposals must be submitted via the PlanetBids portal by September 1, 2026, and include all mandatory attachments and forms
GEI Consultants, Inc.

POSTED

about 9 hours ago

DEADLINE

in 28 days
View Details
NAICS: 541330
New
SLED
Mechanical, Electrical, and Plumbing (MEP) EngineeringThe contract seeks qualified vendors to provide mechanical, electrical, and plumbing engineering services for school facilities, with a focus on designing HVAC, electrical, plumbing, fire alarm, and data systems that prioritize energy efficiency and full compliance with applicable building and safety codes. The scope requires integrated system design that supports sustainable operations and long-term operational reliability across multiple school sites under the jurisdiction of the Baldwin County Board of Education, though the specific locations are not detailed in the available data. All work must align with industry standards and be delivered in coordination with broader capital improvement efforts for public education infrastructure. The solicitation, categorized as a subcontract under NAICS code 541330 for architectural and engineering services, was posted on August 4, 2026, with a response deadline of September 4, 2026. The contracting authority is identified as the Baldwin County Board of Education operating under the state of Georgia, though exact office or performance address details are not provided. The contract is not subject to a specific set-aside classification, and interested parties must submit proposals through the official state procurement portal linked in the posting. Proposals must demonstrate technical expertise, past experience in educational facility design, and a clear plan for ensuring code adherence and energy performance targets.
Baldwin County Board of Education

POSTED

about 10 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541330
New
SLED
26RFSQ69 Engineering Development Services
Solicitation # 26RFSQ69
Williamson County is seeking qualified engineering firms to provide specialized support for the review of third-party developer submissions and quality assurance activities related to plat and driveway permits, FEMA Flood Plain Program administration, and drainage and hydrologic/hydraulic engineering analyses. This engagement is specifically limited to evaluating designs created by external developers and does not encompass original infrastructure design work such as roadway or drainage conveyance design for county projects. The work will support multiple county divisions including Road and Bridge, Development Services & Drainage, and County Facilities, particularly in connection with projects funded through the County’s Road Bond Program. The County anticipates selecting approximately three firms but reserves the right to choose more or fewer based on evaluative criteria and operational needs. Firms interested in this opportunity must submit qualifications in response to solicitation number 26RFSQ69, with proposals due by August 18, 2026. The solicitation was posted on August 4, 2026, and all submissions must be directed to Williamson County in Georgetown, Texas. Primary points of contact for inquiries are Sandra Malcolm and Joy Simonton, with Kerstin Hancock available as a secondary contact. This contract does not involve direct construction or county-led engineering design and is strictly focused on third-party design review and compliance verification. Participation is open to firms capable of demonstrating expertise in the stated technical areas and an understanding of local regulatory frameworks and development processes in Williamson County.
WILLIAMSON COUNTY

POSTED

about 11 hours ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of State → US Embassy Kuala Lumpur

Same awarding agency

NAICS: 561710
New
Federal
Chancery and GOP Pest Management Service (2026-2027)
Solicitation # 19MY3026Q0022
The U.S. Embassy in Kuala Lumpur is soliciting quotations for an Integrated Pest Management service contract covering the Chancery Compound, Ambassador’s residences, and other designated U.S. Government properties in Kuala Lumpur from October 1, 2026, through September 30, 2027. The contract requires comprehensive pest control services including monthly treatments for rodents, cockroaches, and ants using tamper-resistant bait stations, weekly mosquito fogging or misting, and ongoing termite monitoring through in-ground bait stations inspected monthly with detailed reports submitted alongside invoices. All pesticide applications must use only Department of State-authorized chemicals such as Chlorfluazuron, Diflubenzuron, and Fipronil, with full Material Safety Data Sheets and product labeling submitted for prior approval by the Contracting Officer’s Representative. Contractors must comply with U.S. Army Corps of Engineers EM 385-1-1 safety standards, Malaysian Pesticides Board regulations, and Department of State environmental and health guidelines, and must ensure all on-site personnel are certified under local law, properly uniformed, and equipped with personal protective equipment. All submitted proposals must include a detailed Pest Control Plan, Site Safety and Health Plan, Activity Hazard Analyses, list of proposed pesticides with MSDS, and evidence of personnel qualifications and local licensing. Technicians must pass U.S. Embassy background checks and, if approved, will be issued Government-issued ID cards to be worn at all times; unapproved personnel must be escorted at all times. The contract mandates strict adherence to service schedules—no deferrals, combinations, or rescheduling of visits are permitted—and requires submission of monthly termite station inspection reports and a site layout map of monitoring stations. Quotations must be submitted electronically by September 7, 2026, to the Contracting Officer, and any offer exceeding $40,000 requires an active SAM.gov registration. The contract is firm-fixed-price, with no renewal options stated, and all materials must be delivered in original, unopened containers bearing full manufacturer labeling. While the exact contract value is not disclosed, pricing must be submitted as fixed labor rates, and no line-item breakdowns are provided in the solicitation. The evaluation process, though not formally outlined, emphasizes technical compliance, safety procedures, and adherence to prescribed protocols over price competitiveness.
Exterminating and Pest Control Services

POSTED

5 days ago

DEADLINE

in about 1 month
View Details
NAICS: 541611
New
Federal
Safety and Compliance Documentation ServicesThe contract involves the development and submission of comprehensive safety and compliance documentation for operations at the US Embassy in Kuala Lumpur, specifically requiring the preparation of a Site Safety and Health Plan and Activity Hazard Analyses to ensure adherence to occupational safety standards. This subcontract is tied to federal requirements and focuses on identifying, evaluating, and mitigating workplace hazards through structured analytical processes and documented safety protocols. The work will be performed on-site in Kuala Lumpur with a zip code of 50400, and all deliverables must align with established health and safety frameworks applicable to US government overseas operations. The solicitation, classified under NAICS code 541611 for management consulting services, opens on July 30, 2026, and closes on September 7, 2026, at 4:00 AM. It is issued by the Department of State through the US Embassy in Kuala Lumpur and does not specify any set-aside provisions for small businesses or other categories. The nature of the contract demands expertise in safety planning, regulatory compliance, and hazard assessment within a diplomatic or international operations context, requiring contractors to have a proven ability to produce high-quality, actionable documentation under federal standards. The point of contact and full technical specifications are not provided in the available data, suggesting further details may be available through the official SAM.gov link.
Administrative Management and General Management Consulting Services

POSTED

6 days ago

DEADLINE

in about 1 month
View Details
NAICS: 325320
New
Federal
Pesticide and Chemical Supply for Pest AbatementThe contract is for the supply of approved pesticides and treatment chemicals, including Chlorfluazuron, Fipronil, Imidacloprid, and Malathion 96, to support pest abatement activities under the jurisdiction of the U.S. Embassy in Kuala Lumpur. These chemicals are essential for controlling pest populations that may impact public health, infrastructure, and diplomatic operations, ensuring compliance with international health and safety standards. The work is to be performed in Kuala Lumpur, Malaysia, with a zip code of 50400, and falls under the NAICS code 325320, which classifies the manufacturing of pesticide and other agricultural chemical products. The contract is structured as a subcontract and was posted on July 30, 2026, with a response deadline of September 7, 2026, at 4:00 AM UTC. The contracting entity is the Department of State through the U.S. Embassy Kuala Lumpur, and while no specific set-aside provisions or organizational type are indicated, the procurement is intended to secure qualified suppliers who can meet the technical and regulatory requirements for handling and delivering controlled chemical products. The effort supports operational continuity and environmental health compliance at U.S. diplomatic facilities abroad, with delivery and performance expected to align with the embassy’s pest management protocols.
Pesticide and Other Agricultural Chemical Manufacturing

POSTED

6 days ago

DEADLINE

in about 1 month
View Details
NAICS: 339920
New
Federal
Bait Station and Pest Control Equipment SupplyThe contract involves the supply and delivery of in-ground termite bait stations, bait cartridges, and related pest control equipment for use at the US Embassy in Kuala Lumpur, with no installation services included. All items must meet specified technical and performance standards to ensure effective termite management, and the delivery must be completed by the response deadline of September 7, 2026. The equipment is intended for deployment in and around embassy facilities located in the 50400 postal area of Kuala Lumpur, and the contractor is responsible for ensuring compliance with all applicable product specifications and packaging requirements. The contract is classified as a subcontract under NAICS code 339920, which pertains to other miscellaneous manufacturing, and is issued by the US Department of State through the US Embassy in Kuala Lumpur. There is no set-aside designation, meaning all eligible businesses may bid, and the award will be based on factors such as price, product compliance, and ability to meet delivery timelines. While no installation or on-site support is required, the contractor must provide all necessary documentation to verify product authenticity, safety, and suitability for use in an international diplomatic setting. Delivery must be coordinated to arrive at the designated location in Kuala Lumpur without delay, and failure to meet the deadline may result in contract termination or penalties.
Sporting and Athletic Goods Manufacturing

POSTED

6 days ago

DEADLINE

in about 1 month
View Details
NAICS: 561710
New
Federal
Termite Monitoring and Bait Station MaintenanceThe contract involves the installation, inspection, and ongoing maintenance of in-ground termite bait stations at U.S. Government properties located in Kuala Lumpur, Malaysia. The work requires regular monitoring of termite activity with monthly reporting to ensure early detection and effective control, all conducted in accordance with established pest management protocols for federal facilities. The contractor is responsible for deploying bait stations at designated locations, performing routine inspections, replacing bait as needed, and submitting detailed activity reports on a monthly basis to maintain compliance and ensure the integrity of the termite management program. This is a subcontract under the North American Industry Classification System code 561710, which pertains to pest control services, and it is tied to the U.S. Department of State through the U.S. Embassy in Kuala Lumpur. The solicitation was posted on July 30, 2026, with responses due by September 7, 2026. The place of performance is specifically identified as Kuala Lumpur with a postal code of 50400, and all work must be carried out at U.S. Government-owned or -leased properties within this area. The contract demands consistent, reliable service delivery and accurate documentation to support the protection of U.S. diplomatic assets from termite damage.
Exterminating and Pest Control Services

POSTED

6 days ago

DEADLINE

in about 1 month
View Details
NAICS: 561920
Federal
HVAC Preventative Maintenance Service
Solicitation # 19MY3026Q0019
The United States Embassy in Kuala Lumpur is soliciting proposals for a comprehensive HVAC preventative maintenance service under solicitation number 19MY3026Q0019, with a submission deadline of August 22, 2026. The contract requires the contractor to perform monthly and quarterly maintenance on a range of HVAC systems including Trane chillers, air handling units, and control systems across the embassy compound, ensuring all equipment operates safely, efficiently, and in compliance with manufacturer specifications, local Malaysian regulations, and U.S. government standards. Proposals must be submitted in three distinct physical volumes containing executed forms, detailed pricing, and a bar chart performance schedule, with no electronic submissions permitted. Offerors must be actively registered in SAM.gov and provide their Unique Entity Identifier and CAGE code, and must meet strict responsibility criteria including financial stability, relevant experience, and ethical business conduct. The award will be made on a Lowest Price Technically Acceptable basis, with technical acceptability and responsibility serving as mandatory thresholds before price becomes the deciding factor. Performance will cover a base period of one year with a potential one-year option, beginning in September 2026. All work must be executed by personnel who have passed U.S. Government security screening, with the contractor required to submit workforce details within ten days of award. The on-site manager must be fluent in English, and subcontractors require prior government approval. The contractor must provide performance and payment bonds equal to 20% of the contract value, maintain comprehensive insurance naming the U.S. Department of State as additional insured, and adhere to strict environmental and inventory management requirements including monthly hazardous waste reporting and OEM-approved parts use. Refrigerants must comply with AHRI 700-2015 standards, and all work must be documented with detailed service reports and test results. Invoicing must be submitted manually with original and three copies to the Financial Management Center at the embassy, and all materials must remain unused and properly labeled until delivery. The contractor is also responsible for customs clearance, port unloading, and unpacking of imported equipment and must avoid any activities involving prohibited telecommunications equipment or Kaspersky Lab products. Failure to meet any contractual requirement may result in stop-work orders or termination.
Convention and Trade Show Organizers

POSTED

9 days ago

DEADLINE

in 17 days
View Details