Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

First Article and Production Lot Testing Support

Active

Federal

Response Deadline07/21/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract supports First Article Testing and Production Lot Testing activities, requiring comprehensive coordination to ensure compliance with defense standards through sample submission, detailed documentation, and collaboration with the Defense Logistics Agency for source inspection. The scope encompasses end-to-end management of testing protocols, from initial sample preparation and delivery to final reporting and certification, ensuring all deliverables meet required technical and quality benchmarks. This subcontract is tied to the NAICS code 541380 and is issued under the Department of Defense through C and T Supply Chain, with a narrow window for response, closing just one day after the posting date on July 21, 2026. Performance is expected to align with federal defense procurement requirements, emphasizing timely execution and accurate documentation for audit and inspection purposes.

General Info

First Article and Production Lot Testing under DoD, requiring rapid response, DLA coordination, and strict compliance with defense standards.

Agency

Department Of Defense → C AND T SUPPLY CHAINView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Response DeadlineJul 21

Submission deadline

Response Deadline

07/21/2026, 05:00:00 PM UTCin about 3 hours

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → C AND T SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → C AND T SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Support for First Article Testing (FAT) and Production Lot Testing (PLT), including sample submission, documentation, and coordination with DLA for source inspection.

Similar Contracts

Same NAICS industry code

Project Inspection and Quality Control SupportThe contract entails field-based quality control services for emulsion application projects under the Texas Department of Transportation, requiring on-site monitoring to ensure compliance with TxDOT standards. Key responsibilities include conducting thickness measurements, continuous temperature surveillance, and verification of material and application adherence to specified technical requirements. All work must be performed in the field during active construction phases to guarantee real-time validation of quality parameters and regulatory alignment. The solicitation is classified as a subcontract with a NAICS code of 541380 and was posted on July 20, 2026, with a response deadline of August 12, 2026. The project is managed by the Texas agency under the TxDOT framework, and performance is expected to occur within the state, though specific locations are not defined. Interested parties must submit their proposals through the official TX SmartBuy portal prior to the deadline to be considered for award.

Texas Department of Transportation

POSTED

about 16 hours ago

DEADLINE

5-Year Elevator Safety and Performance TestingA five-year contract exists for the comprehensive testing and certification of elevator systems in alignment with ANSI/ASME A17.2 standards, requiring regular load testing, emergency brake functionality checks, travel time verification, and full compliance reporting. The scope encompasses systematic evaluations to ensure ongoing safety, operational efficiency, and regulatory adherence across all covered elevator installations. This subcontract is structured to maintain continuous compliance over the contract term, with all testing activities and documentation submitted in accordance with nationally recognized elevator safety codes. The solicitation was posted on July 20, 2026, with a response deadline of August 18, 2026, and falls under NAICS code 541380, indicating professional, scientific, and technical services related to engineering and inspection. The contract is issued by the State of Utah, with no specific performance location or point of contact identified. There is no set-aside designation or small business preference stated, and all responses must be submitted through the designated portal at the provided URL. The contract does not specify geographic limitations beyond state jurisdiction, and the testing must be performed by qualified entities capable of delivering certified results meeting federal elevator safety requirements.

POSTED

about 17 hours ago

DEADLINE

Construction Materials Testing (CMT) & ObservationThe contract seeks a qualified subcontractor to perform comprehensive field and laboratory testing services during construction, specifically for earthwork compaction, concrete, and structural backfill materials, along with associated special inspection duties. The work requires adherence to established standards and protocols to ensure material integrity and structural compliance throughout the project lifecycle, with testing conducted in real time at construction sites and in certified laboratories. The solicitation is issued by the City of Issaquah under NAICS code 541380 and is open for responses until August 14, 2026, with proposals due by 11:00 PM Pacific Time. This is a subcontract opportunity, and bidders must be prepared to meet the technical, logistical, and regulatory requirements expected by the city for construction materials verification and quality assurance.

City of Issaquah

POSTED

about 19 hours ago

DEADLINE

Geotechnical Laboratory Testing ServicesThe City of Issaquah is seeking qualified providers to perform a range of physical and mechanical testing on soil and rock samples, including moisture content analysis, Atterberg limits, triaxial shear, and consolidation tests, as part of a subcontract opportunity under NAICS code 541380. The work is intended to support geotechnical engineering efforts and must be executed with precision and adherence to industry standards to ensure accurate material characterization for infrastructure and land development projects. While specific location details for performance are not specified, the solicitation is linked to Washington state and the contract will be managed by the City of Issaquah’s relevant department. Interested parties must submit their proposals by the deadline of August 14, 2026, at 11:00 PM Pacific Time, with the opportunity posted on July 20, 2026. There is no set-aside classification indicated, meaning the contract is open to all eligible subcontractors regardless of business size or ownership type. The solicitation does not include a designated point of contact, and bidders are directed to the provided public procurement link for further details, submission guidelines, and any supporting documentation associated with the bid.

City of Issaquah

POSTED

about 19 hours ago

DEADLINE

Quality Inspection and Acceptance SupportThe contract titled Quality Inspection and Acceptance Support is a subcontract issued by Dallas Area Rapid Transit under NAICS code 541380, focusing on providing inspection, testing, and documentation services to ensure that all deliverables comply with specified quality and suitability standards. The work involves verifying conformity to contractual requirements through systematic evaluation processes, with the goal of confirming that products, systems, or components meet the necessary performance and safety benchmarks before acceptance. Services will encompass comprehensive documentation to support traceability, compliance, and audit readiness throughout the project lifecycle. The opportunity was posted on July 20, 2026, with a strict response deadline of July 23, 2026, at 7:00 PM, indicating a rapid procurement timeline. Performance location details are not specified, but the contracting entity is based in Texas. There is no set-aside designation or additional agency information provided, and the point of contact is not listed in the data. Potential bidders must be prepared to deliver high-precision inspection and testing protocols with full documentation support to satisfy DART’s quality assurance expectations. The opportunity is accessible via the provided Bonfire Hub link.

Dallas Area Rapid Transit

POSTED

about 20 hours ago

DEADLINE

Radioactive Materials Notification and LabelingThe contract requires the detection, notification, and accurate labeling of materials that contain radioactive substances exceeding established regulatory thresholds, ensuring full compliance with both Nuclear Regulatory Commission and Department of Transportation standards. This subcontract is issued by the Defense Logistics Agency under the Department of Defense, targeting entities capable of identifying and managing radioactive content in accordance with federal safety and transportation regulations. The work must be performed to meet stringent marking, documentation, and reporting protocols to prevent exposure risks and ensure safe handling throughout the supply chain. Proposals are due by July 23, 2026, with the solicitation posted on July 20, 2026, indicating a tightly windowed response period. The NAICS code 541380 applies to other scientific and technical consulting services, suggesting the effort involves specialized expertise in radiological safety and compliance rather than manufacturing or logistics operations alone. While no specific location for performance is provided, the contractor must be prepared to support activities across any Department of Defense operational or distribution networks where regulated radioactive materials may be encountered. All deliverables must align precisely with current NRC and DOT requirements to maintain regulatory integrity and operational safety.

Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

Packaging, Labeling, and Hazard Communication ComplianceThe contract requires compliance with federal and Defense Logistics Agency standards for the packaging, labeling, and hazardous materials documentation of medical devices, including the provision of Safety Data Sheets. All activities must adhere strictly to established regulatory frameworks to ensure safe handling, transportation, and use of medical products within the Department of Defense supply chain. The work is classified as a subcontract under NAICS code 541380 and is performance-based at Fort Campbell, with a requirement for all deliverables to meet precise quality and documentation thresholds. The solicitation was posted on July 20, 2026, and responses are due by July 27, 2026, indicating a short but critical window for proposal submission. The contracting office operates under the Medical Supply Chain MD Surg FSF, a unit within the Department of Defense, and the place of performance is fixed at Fort Campbell with a specific zip code. While no set-aside type is specified, the contract is intended to support critical defense medical logistics and demands expertise in regulatory compliance, hazardous material handling, and medical device packaging standards.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 21 hours ago

DEADLINE

Production Lot Testing (PLT) Sample Submission and ReportingThe contract requires the formal execution of Production Lot Testing on two sample units, with the generation of a certified report to be submitted to the Defense Logistics Agency within 470 days. Testing must adhere to specified quality verification levels VII, IV, II and associated Acceptable Quality Levels of 0.1, 1.0, and 4.0, ensuring rigorous compliance with military quality standards. The deliverable is not merely a test execution but a fully documented and certified outcome that meets the stringent verification requirements of the Department of Defense. This subcontract falls under NAICS code 541380 and is issued by the Defense Logistics Agency, targeting specialized technical services related to quality assurance and testing. The performance location and point of contact details are not provided, but the contractual obligations are bound to the DLA’s formal submission protocols. The requirement demands precision in both testing methodology and reporting integrity, with the entire process expected to conclude within the designated 470-day timeline to support supply chain verification for defense-related materiel.

Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

Technical Data Packaging and Marking ComplianceThe contract requires technical and quality assurance support to ensure all items meet military packaging and marking standards, specifically MIL-STD-129, MIL-STD-130N, and MIL-STD-2073-1E, to guarantee proper identification, handling, and logistics tracking throughout the supply chain. This subcontract is focused on compliance with Department of Defense requirements and will be executed at the place of performance in Greensboro, North Carolina, with a zip code of 27409. The work involves verifying that all materials are labeled, packaged, and documented in full accordance with the specified military standards to maintain operational readiness and supply chain integrity. The solicitation was posted on July 20, 2026, with a response deadline of July 31, 2026, indicating a narrow window for proposers to submit their qualifications. The NAICS code 541380 classifies this as a professional, scientific, and technical services contract, emphasizing technical expertise over general labor or manufacturing. The agency responsible is the Department of Defense under the Land Supply Chain organization, and the contract is specifically designated as a subcontract, meaning it supports a larger procurement effort. All work must be completed with precision and traceability to meet the stringent demands of military logistics and inventory systems.

LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

First Article Testing (FAT) and Engineering Documentation ServicesThe contract encompasses independent testing and validation of initial production samples to ensure compliance with stringent aerospace and defense standards, specifically AS9102 and MIL-STD-1916. This includes comprehensive dimensional inspections, material certification, and the generation of a full First Article Testing report, all critical to verifying that production processes consistently yield conforming components. The work is scoped under a subcontract classified under NAICS code 541380, indicating engineering services related to research and development in the physical sciences, and is managed by the Defense Logistics Agency under the Department of Defense. The contract is titled First Article Testing and Engineering Documentation Services, and while no solicitation number is provided, it is linked to an active award record through the DIBBS portal. The place of performance and point of contact details remain unspecified, and the work is expected to support defense supply chain integrity by delivering verified documentation and validated production samples prior to full-scale manufacturing. The posting date of July 20, 2026, suggests this is a forward-looking procurement initiative, likely tied to upcoming production cycles or new system integrations requiring certified first articles.

Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

Electronic Component Testing and Calibration ServicesThe contract encompasses pre-shipment testing, calibration, and functional verification of motion transducers to ensure their reliability and accuracy under operational conditions. These services are critical for maintaining the precision and integrity of defense-related electronic systems, with all work conducted to rigorous standards prior to delivery. The effort supports the Department of Defense's need for high-performance components that meet exacting military specifications. Issued as a subcontract under NAICS code 541380, the work is managed by the Defense Logistics Agency and falls under the broader umbrella of electronic component testing and calibration services. The contract was posted on July 20, 2026, and is linked to award number SPE4A525P5192, though specific performance location and point of contact details are not provided. The scope ensures that motion transducers are thoroughly validated, minimizing risk of failure in field applications and contributing to mission readiness across defense platforms.

Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

Military-Standard Marking and Bar-CodingThis contract requires the application of permanent labels and data matrix barcodes to packaging and units in strict accordance with MIL-STD-129 standards to ensure full compliance with Department of Defense logistics traceability requirements. The work involves precise labeling procedures that enable accurate identification, tracking, and inventory management of military supplies throughout the supply chain, from procurement to field deployment. All markings must meet DoD-specified durability, readability, and placement criteria to support automated scanning and data integration across defense logistics systems. The contract is designated as a subcontract under NAICS code 541380 and is issued by the Fluid Handling Division of the Department of Defense. Performance is required at Hill Air Force Base, Utah, with a zip code of 84056-5734. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026. While the specific contracting office and point of contact are not provided, the requirement is critical for maintaining end-to-end visibility of military assets and must be executed with rigorous attention to technical specifications and compliance timelines.

FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

More opportunities from Department Of Defense → C AND T SUPPLY CHAIN

Same awarding agency

Logistics and Transportation to DestinationThe contract requires the transportation of finished decoration sets from the manufacturing or packaging location to DLA Troop Support in Philadelphia, PA, with full responsibility for palletization, FOB destination shipping terms, and ensuring damage-free delivery throughout the entire logistics chain. The service must comply with strict handling requirements to protect the integrity of the goods during transit, and all responsibilities fall on the contractor from origin through final delivery at the designated government facility. This is a subcontract under NAICS code 484220 for truck transportation of freight, issued by C AND T SUPPLY CHAIN under the Department of Defense, with a solicitation window opening on July 20, 2026, and closing just one day later on July 21, 2026, indicating an expedited procurement timeline. The place of performance is clearly defined as Philadelphia, PA, and while detailed address information is not provided, the contractor must be prepared to coordinate with DLA Troop Support to meet delivery specifications. Bidders must respond within the narrow timeframe to secure the opportunity, with all logistical planning focused on precision, timeliness, and protection of the cargo from start to finish.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 21 hours ago

DEADLINE

in about 3 hours

Ribbon, Case, and Packaging AssemblyThe contract calls for the supply and assembly of ribbon mounts, paperboard boxes, intermediate shipping containers, along with barcoding, labeling, and preservation services in strict compliance with MIL-STD-2073-1E and MIL-STD-129 standards. All work must adhere to federal military packaging specifications ensuring uniformity, durability, and traceability throughout the supply chain. The scope includes full assembly and preparation of packaging components to meet defense logistics requirements, with attention to material quality, marking accuracy, and environmental preservation protocols. This is a subcontract opportunity issued by the Department of Defense through C AND T SUPPLY CHAIN, with a NAICS code of 323110 indicating it falls under printing and related support activities. The solicitation has an extremely tight turnaround, with a posted date of July 20, 2026, and a response deadline just one day later on July 21, 2026. There is no set-aside designation provided, and the place of performance details are unspecified, requiring potential offerors to confirm location requirements directly. All submissions must be made through the DIBBS system using the provided UI link.

Commercial Lithographic Printing

POSTED

about 21 hours ago

DEADLINE

in about 3 hours

Precision Metal Stamping and Medal FabricationThe contract calls for the precise manufacture of Legion of Merit medals and associated decoration components, requiring full production capabilities including die creation, metal stamping, engraving, gold plating, and polishing—all to strict military specifications. The work must meet exacting standards for quality, durability, and ceremonial accuracy, ensuring each medal conforms to institutional requirements for award presentation. All fabrication processes must be executed under controlled conditions to guarantee uniformity and adherence to Defense Department guidelines. This is a subcontract opportunity under NAICS code 339910, posted by C AND T SUPPLY CHAIN on behalf of the Department of Defense, with a very brief response window closing just one day after posting. The solicitation does not specify a set-aside designation or detailed placement of performance, and no point of contact information is provided, suggesting the process is streamlined or managed through a centralized procurement portal. Interested suppliers must respond by the deadline to be considered for inclusion in the defense supply chain for this prestigious military decoration.

Jewelry and Silverware Manufacturing

POSTED

about 21 hours ago

DEADLINE

in about 3 hours

Packaging and Marking Compliance ServicesThe contract requires full compliance with U.S. military packaging and marking standards, specifically MIL-I-11132 and MIL-STD-2073-1E for packaging processes including preservation, wrapping, cushioning, and unit pack configuration, as well as MIL-STD-129 for labeling and marking. All work must adhere strictly to these specifications to ensure proper handling, storage, and transportation of military materiel. This subcontract is set aside entirely for small businesses under the SBA’s Total Small Business Set-Aside program, with the NAICS code 541690 indicating it falls under other scientific and technical consulting services. The solicitation was posted on July 20, 2026, with responses due by July 24, 2026, and is managed by C AND T SUPPLY CHAIN under the Department of Defense, with performance location details not specified.

Other Scientific and Technical Consulting Services

POSTED

about 21 hours ago

DEADLINE

Quality Assurance and First Article Testing (FAT) ServicesThe contract entails providing independent verification and documentation of first article samples in compliance with FAR 52.209-4, requiring full-scale testing, detailed reporting, and direct support for government submission processes. The services are scoped to ensure that all first article samples meet specified quality and performance standards before production approval, with thorough documentation to validate conformance across all technical requirements. This work is critical to enabling government acceptance and must be executed with precision to support defense acquisition timelines and regulatory compliance. This is a subcontract under a Total Small Business Set-Aside classification, designated for small businesses as defined by the SBA, and is tied to the NAICS code 541330 for engineering services. The contracting entity is C AND T SUPPLY CHAIN under the Department of Defense, with a strict response deadline of July 24, 2026, and a posted date of July 20, 2026. The work is intended to support defense-related supply chain integrity, and performance is expected to align with federal quality assurance protocols, though specific location details for performance are not provided. Submission must be made through the designated DIBBS portal to be considered valid.

Engineering Services

POSTED

about 21 hours ago

DEADLINE

Supply Chain Logistics and Delivery (F.O.B. Destination Coordination)The contract mandates the coordinated logistics for the shipment of 12,000 insignia units to Phoenix, AZ under F.O.B. Destination terms, meaning the vendor assumes full responsibility for delivery, including all costs and risks until the goods are received at the destination. Compliance with specific packaging standards is required to ensure the integrity and security of the insignia units during transit. The vendor must utilize the Web–Based Applied Workflow (WAWF) system for invoicing and provide complete delivery documentation to satisfy federal procurement requirements. This is a subcontract classified as a Total Small Business Set-Aside under the SBA, exclusively available to small businesses, with the NAICS code 484220 indicating it pertains to truck transportation of freight. The solicitation was posted by the Department of Defense through C AND T SUPPLY CHAIN and closed for responses on July 24, 2026, with all activities centered on timely, compliant fulfillment to meet military logistics standards.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 21 hours ago

DEADLINE

Manufacture of Military Rank Insignia (Textile/Emblem Production)The contract requires the full manufacturing of 12,000 military rank insignia units, encompassing all aspects of production including embroidery, sourcing of approved materials, rigorous quality control procedures, secure packaging, and comprehensive traceability documentation aligned with Defense Logistics Agency standards. Every phase of the work must adhere to strict military specifications to ensure durability, consistency, and compliance with federal imaging and identification protocols for armed forces personnel. This is a small business set-aside subcontract under NAICS code 314994, exclusively open to small businesses as defined by the Small Business Administration, and is administered by the Department of Defense through C AND T SUPPLY CHAIN. The solicitation was posted on July 20, 2026, with responses due by July 24, 2026, indicating a tight four-day window for proposals. The place of performance and specific delivery location are not defined, requiring the contractor to confirm logistics details directly with the contracting office, and all documentation must support full accountability from raw material to final shipment.

Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

about 21 hours ago

DEADLINE

FLAG, NATIONALThe contract specifies the procurement of 80 national flags of Australia, classified as Type 1, Class 1, with dimensions of 5 feet hoist by 10 feet fly, manufactured in strict accordance with Drawing 6-3-17 and Specification MIL-DTL-2692. All supplies must comply with DLA’s packaging requirements, including MIL-STD-2073-1E for preservation and packaging, MIL-STD-129 for marking, and DSCP 4155.3 for lot numbering, with no special marking required. The flags must be palletized and packaged per RP001, with materials and methods aligned to MIL-F-2692. The item is delivered on a firm fixed price basis with no variance allowed in quantity, and is subject to inspection and acceptance at the destination point, which is Arizona Industries for the Blind in Phoenix, AZ. A full set of 80 units must be delivered within 150 days after the award date. Two first article samples are required for visual, dimensional, and shade evaluation, with results and production directions provided within 30 calendar days of receipt. The contract incorporates mandatory technical and quality requirements from the DLA Master List, including supply chain traceability documentation per DLAD Procurement Note C03, cybersecurity compliance through CMMC Level 2 self-assessment, and prohibition of intentional mercury exposure except under specific exemptions. Inspection follows FAR 52.246-2, with MIL-STD-105E canceled and replaced by MIL-STD-1916 or ANSI/ASQ Z1.4 as preferred alternatives. The government retains rights to covered defense information, and non-accepted supplies must have government identification removed. The contract is tied to Purchase Request 7016931903 with a required delivery date of March 26, 2027.

Office Supplies (except Paper) Manufacturing

POSTED

about 21 hours ago

DEADLINE

DECORATION SET, INDIThe contract specifies the procurement of 1,000 Decoration Sets, each comprising the Legion of Merit Officer and Legionnaire components including a service ribbon, decoration ribbon, lapel button, and presentation case, all identified by NSN 8455-00-269-5754. The items must be delivered within 211 days after contract award to the destination address for Arizona Industries for the Blind in Phoenix, Arizona, under a Firm Fixed Price term with zero variance in quantity. Each set must be individually enclosed in a Type VIII, Style 6 presentation case conforming to MIL-DTL-3943 and MIL-DTL-14633 standards, then nested within a snug-fitting paperboard protective box, with every fifty sets further packed in a commercial-grade paperboard intermediate box. Shipping containers, if used, must be structurally robust to prevent corrosion, deterioration, or damage during transit and storage. Marking must strictly follow MIL-STD-129 and MIL-HDBK-129, including NSN, contractor CAGE code, contract number, packing date, lot and shipment identifiers, and permanent delivery labels, with barcoding applied where required. Palletization is mandatory when economically feasible, utilizing 4-way winged pallets. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with compliance based on the revision in effect at the solicitation or award date. Five first article samples are required and will be tested, with Contractor notification due within thirty calendar days of receipt. The packaging and handling procedures must adhere to MIL-STD-2073-1E, including preservation methods and materials, and all items are subject to inspection and acceptance at the destination. Government identification must be removed from non-accepted supplies, and covered defense information protocols apply. The procurement is under DLA’s authorized unit of issue, with compliance confirmed through reference to approved ANSI X12 standards. This solicitation was issued under SPE1C1-26-Q-0370 with a response deadline of July 21, 2026, and a contract performance deadline set for February 26, 2027.

POSTED

about 21 hours ago

DEADLINE

in about 3 hours

DECORATION SET, INDIThe contract awards the supply of 1,000 Decoration Sets, Distinguished Public Service, U.S. Army, consisting of a regular size medal, mini medal, Type II service ribbon, and lapel button, replacing the previous NSN 8455-01-465-8713. The item is identified by NSN 8455-01-651-1923 and is procured under a firm fixed price term with no variance allowed in quantity. Delivery is required 196 days after contract award, with inspection and acceptance occurring at destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including specific preservation methods, packaging materials, and marking per MIL-STD-129 with no special markings required. Palletization must align with DLA standards. Five first article samples are mandatory, and the contractor will receive written notification of test results within thirty calendar days of receipt by the contracting officer. Covered defense information provisions may apply, and government identification must be removed from non-accepted supplies. The procurement follows DoD unit of issue guidelines and is tied to purchase request 7017412889, with a delivery target date of February 26, 2027, and delivery to Arizona Industries for the Blind in Phoenix, AZ. The contract is managed under solicitation SPE1C1-26-Q-0380, issued by the Department of Defense, with technical and quality requirements referenced from the DLA Master List.

POSTED

about 21 hours ago

DEADLINE

INSIGNIA, RANK, OFFICThe contract specifies the procurement of 12,000 miniature insignia for First Lieutenant cadet ranks under the U.S. Air Force ROTC and JROTC programs, identified by NSN 8455-00-460-4197, under a firm fixed price agreement with no variance allowed in quantity. Delivery is required within 150 days after contract award, with inspection and acceptance occurring at the destination point. The supplies must comply with DLA packaging standards MIL-STD-2073-1E and marking requirements per MIL-STD-129 with no special marking codes. Five first article samples are mandatory, subject to testing and written notification within 30 days of receipt by the contracting officer. Quality and technical requirements are governed by the DLA Master List, and MIL-STD-105E has been canceled with no reference allowed; alternatives MIL-STD-1916 or ANSI/ASQ Z1.4 may be considered with proper evaluation. Inspection follows FAR 52.246-2, and the item is classified under NAICS 33395 with a total small business set-aside. Packaging must align with MIL-I-11132 standards, and the delivery destination is Arizona Industries for the Blind in Phoenix, AZ. The solicitation, issued on July 20, 2026, with a response deadline of July 24, 2026, is managed by the Department of Defense’s C and T Supply Chain under contract number SPE1C1-26-Q-0377.

Fluid Power Cylinder and Actuator Manufacturing

POSTED

about 21 hours ago

DEADLINE

SNAP LINK, RAPPELLERThe contract is for the procurement of 40 units of SNAP LINK, RAPPELLER with NSN 8465-01-276-8198 under solicitation SPE1C1-26-T-1542, issued by the Department of Defense through C and T Supply Chain. The unit price is $40.00 per unit, totaling $1,600.00, with delivery required within 20 days FOB destination and no variance allowed in quantity. All packaging and labeling must comply with DLA’s Master List of Technical and Quality Requirements, MIL-STD-129, and ASTM D3951 for non-hazardous items, with specific attention to the hazard classification per FED-STD-313 and TQ requirement IP025 if applicable. Palletization must follow RP001 DLA Packaging Requirements, and the item must be shipped via the fastest traceable means, excluding parcel post. The delivery address is Fort Bragg, NC, with the freight and mark-for instructions identical. The required delivery date is July 22, 2026, and the contract references the DLA Technical and Quality Requirements database, which takes precedence over any commercial standards. The item is classified with a strength of 34 kN, and all shipments must include the government-only identifiers including IPD, DIC, DIST, and ADV codes.

Apparel Accessories and Other Apparel Manufacturing

POSTED

about 21 hours ago

DEADLINE