Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

First Article Testing (FAT) for Aircraft Access Cover

Active

Federal

Response Deadline09/25/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves performing First Article Testing and validation for an aircraft access cover supporting prime contractors on DLA Aviation projects for the Department of Defense. The selected provider will utilize aerospace-grade measurement equipment to conduct government-mandated testing on the initial production unit to ensure all material integrity and tolerances are met. The contractor must possess government-approved testing certifications to qualify for this work. The final deliverables for the project include a validated First Article Unit and the corresponding comprehensive test reports. This opportunity was posted by the ASC Supplier Oper AE and AF Div with a response deadline of September 25, 2026.

General Info

Subcontract for aircraft access cover First Article Testing and validation for DoD projects.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

611512 - Flight TrainingView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-26-T-762Y.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

GOVERNMENT FIRST ARTIC

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 17

subcontract

Response DeadlineSep 25

Submission deadline

Response Deadline

09/25/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs First Article Testing (FAT) and validation for an aircraft access cover for prime contractors on DLA Aviation projects. Conducts government-required testing on the first unit produced using aerospace-grade measurement equipment to validate tolerances and material integrity. Requires government-approved testing certifications. Delivers a validated First Article Unit and associated test reports.

Similar Contracts

Same NAICS industry code

Gulfstream G280 Full Flight Simulator (FFS) ProvisionThis subcontract through the Department of Transportation involves the provision of Full Flight Simulator facilities for prime contractors supporting FAA pilot training projects. The scope of work focuses on delivering access to a certified Level D Gulfstream G280 simulator specifically for recurrent qualification and PIC proficiency checks, including the delivery of simulator hours and facility access for flight training modules. The performance of this contract will take place in Oklahoma City and requires strict adherence to National Electrical Code and National Fire Code safety standards. The opportunity was posted on September 17, 2026, with a response deadline of September 24, 2026, under NAICS code 611512.

6973GH Franchise Acquisition Svcs

POSTED

DEADLINE

Gulfstream G280 Pilot Qualification and Recurrent TrainingThe Gulfstream G280 Pilot Qualification and Recurrent Training subcontract involves providing initial and recurrent flight training for prime contractors on FAA inspector and pilot projects. The scope includes conducting ground school for Initial Pilot Qualification and Recurrent Pilot Qualification Training to ensure students are prepared for Pilot-in-Command proficiency checks using Gulfstream G280 aircraft. This project, managed under the Department of Transportation, requires instructors who are U.S. citizens and hold G280 certifications to deliver certified FAA inspectors and pilots. The performance of these services will take place in Oklahoma City, with a response deadline of September 24, 2026.

6973GH Franchise Acquisition Svcs

POSTED

DEADLINE

Gulfstream G280 Initial and Recurrent Pilot Qualification Training

Solicitation # 6973GH-27-R-GulfstreamG280

The Federal Aviation Administration is seeking qualified vendors to provide initial and recurrent ground school and flight training for FAA inspectors and pilots on the Gulfstream G280 aircraft. The primary objective is to ensure that these personnel achieve and maintain mandatory certifications and annual requirements for safety oversight, specifically adhering to Airline Transport Pilot standards and 14 CFR Part 61 regulations. The intended contract structure is a Firm Fixed Price Indefinite Delivery, Requirements Contract (ID/R), governed by the Acquisition Management System rather than the FAR. Training requirements include ground school and full flight simulator instruction designed to enable pilots to pass pilot-in-command proficiency checks and unrestricted type rating practical tests. All instruction must follow the crew concept and be delivered via an FAA-approved training program by qualified U.S. citizen personnel. Deliverables include the provision of current student materials and the issuance of Certificates of Training upon completion. Interested vendors must submit an expression of interest by September 24, 2026, detailing their capabilities, past performance with aircraft-specific training, and resources available to meet FAA safety and quality standards.

6973GH Franchise Acquisition Svcs

POSTED

DEADLINE

Test Pilot School Curriculum Development and Analysis Support

Solicitation # 260903154159318824604

The United States Air Force Test Pilot School requires a non-personnel service contract for Curriculum Development and Analysis Support at Edwards Air Force Base, California. This Firm-Fixed Price contract, categorized under NAICS 611512 for Flight Training, involves a base period from October 1, 2026, to September 30, 2027, with one option year extending to September 30, 2028. The total anticipated contract value will not exceed $349,999.99. The scope of work includes providing expert instructional support for the flight sciences phase, developing and revising curricula, integrating simulators, supporting Test Management Projects, and providing advisory services to the Commandant, Technical Director, and Chief Pilot. To be eligible, the contractor must be a world-recognized expert in flight sciences with at least 25 years of professional military aircraft flight test experience and a Master's degree in Aerospace Engineering or a related field from an accredited U.S. university. Additional requirements include experience in flight envelope expansion, variable-stability instruction, and AI controller integration. Award will be based on a Best Value approach, where technical capability and flying qualifications are prioritized over price. Personnel must maintain a Secret security clearance and comply with all installation access and security protocols. Quotes are submitted via email and evaluated based on the ability to provide the requested products and adherence to the strict professional qualifications.

FA9304 Aftc Pzz

POSTED

DEADLINE

Solicitation for Joint Base Andrews (JBA) Aircrew Transition Training

Solicitation # FA286026Q4034

The Department of the Air Force, through the 316th Contracting Squadron, has issued a Request for Quotation (solicitation FA286026Q4034) for a turnkey training solution at Joint Base Andrews, Maryland. The primary objective is to provide foundational training for UH-1N aircrew to achieve Basic Aircraft Qualification on the HH-60W platform. This comprehensive requirement includes academic instruction, simulator training, and flight training, as well as courseware management, program management, and syllabus development in accordance with AFMAN 11-2HH-60W. The contract is planned for a twelve-month period of performance with an option for a six-month extension. The contractor is expected to utilize an 11-FTE staffing model, including instructor pilots, special mission aviators, and administrative support, while maintaining a 1-to-2 instructor-to-student ratio. The government will award the contract to the most advantageous offeror, with technical approach and past performance being significantly more important than price. Evaluation factors include the proposed instructional methodology, simulator solutions, the credibility of the staffing and quality control plans, and the effectiveness of the contract transition plan. Offerors must submit a technical proposal, a management approach including key personnel resumes, and a price proposal. Note that funds are not presently available, and no award will be made until funding is secured. The place of performance is Joint Base Andrews, though secondary locations may be approved for simulator or flight training. All invoicing must be processed through the Wide Area WorkFlow system.

FA2860 316 Cons Pk

POSTED

DEADLINE

Flight Training

Solicitation # RBAA 2027-095

The Colorado Department of Public Safety, on behalf of the Colorado State Patrol Aircraft Unit, is soliciting quotes under RBAA 2027-095 for a multi-year flight training agreement running through December 31, 2028. The contract requires a provider to deliver initial and recurrent full-motion simulator training for Pilatus PC-12 NG aircraft equipped with Honeywell Primus Apex avionics and King Air 200 aircraft equipped with Garmin G-1000 avionics. Specific capacity requirements include at least four pilot training slots for the PC-12 in October of 2026, 2027, and 2028, and four slots for the King Air in March of 2027 and 2028. The training facility must be located within 600 driving miles of Denver, Colorado, with a stated preference for in-state providers. Bids must be submitted via email to cdps_edo_bids@state.co.us by 2:00 PM MT on Wednesday, September 23, 2026. The award will be granted to the responsible respondent offering the most advantageous quote, with price and cost serving as the primary evaluation factor. Required submission documents include a formal proposal, a completed pricing sheet, and a W-9 form. Verified Service-Disabled Veteran-Owned Small Businesses will receive a 3% price preference. The resulting purchase order will be subject to standard state terms and conditions, including FAR clauses for termination for convenience and requirements for proof of good standing with the Colorado Secretary of State.

CDPS - Colorado State Patrol

POSTED

DEADLINE

Specialized Aviation Repair & Maintenance ServicesThe Specialized Aviation Repair and Maintenance Services subcontract, issued by the Department of Defense under the ASC Supplier Oper AE and AF Div, focuses on the repair of first article units for prime contractors on DLA Aviation projects. The scope of work involves troubleshooting failures during the First Article Test process, performing corrective maintenance, and modifying articles based on test results to ensure the delivery of a fully functional unit. This effort requires the use of certified aviation technicians and specialized repair tooling. The solicitation was posted on September 15, 2026, with a response deadline of October 21, 2026. The contract is categorized under NAICS code 611512.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

in about 1 month

Avionics Systems Supply (Garmin G1000)This subcontract, managed by the Department of Justice Headquarters, involves the supply of Garmin G1000 integrated flight deck hardware and software suites. These components and licenses are intended for installation into FTD cockpit replicas for prime contractors working on DEA Aviation Division projects. A critical requirement for this engagement is that all aviation electronics must maintain FAA certification. The opportunity is designated as a total Small Business Set Aside under NAICS code 611512. Performance for this contract will take place in Fort Worth, Texas. Interested parties must adhere to the response deadline of September 22, 2026.

POSTED

DEADLINE

Range Training Officer (IDIQ)

Solicitation # FA500426R0026

This Indefinite Delivery/Indefinite Quantity (IDIQ) solicitation, issued by the Department of Defense at Eielson Air Force Base, Alaska, seeks specialized contractor support for Range Training Officers to facilitate Large Force Exercises. The primary scope of work includes providing subject matter experts for tactical control, threat emulation, intelligence integration, and software-based air-to-surface weapons validation. These services are focused on Red Flag-Alaska and Northern Edge exercises within the Joint Pacific Alaska Range Complex, with additional contingency support provided on an as-needed basis for Red Flag-Nellis at Nellis Air Force Base. The contract is a total Small Business set-aside, specifically targeting Women-Owned Small Businesses, and carries a maximum contract ceiling of $25,000,000 over a five-year period with a six-month option. The selection process follows a Highest Technically Rated with a Fair and Reasonable Price model. Evaluation is based on four primary factors: Technical Approach and Methodology, Staffing and Personnel, Past Performance, and Price. Technical evaluation for Factor 1 is substantiated through a self-scoring matrix and includes a pass/fail software capability demonstration, while Factor 2 focuses on the ability to recruit and retain highly qualified personnel, such as those with experience equivalent to USAF Instructor or Weapons Officers. Proposals must be submitted in three distinct volumes via the Procurement Integrated Enterprise Environment (PIEE). Key deliverables include mission truth data, range characterization reports, and software performance logs, all of which must adhere to strict security protocols and accuracy standards, including a 99% accuracy requirement for air-to-surface munitions validation.

FA5004 354 Cons Pk

POSTED

DEADLINE

*EXTENDED* USAF TPS Qualitative Evaluation Flight Training Multiple Award BPA 3 for T-2 Buckeye, A-4 Skyhawk, Daher Kodiak, Cirrus Vision Jet, Noorduyn Norseman, Systems Platform Aircraft, Lighter-Than-Air, and Jet Glider Services

Solicitation # A068521

This Request for Quote is for the acquisition of multiple Blanket Purchase Agreements to provide qualitative evaluation flight training for the AFTC Test Pilot School at Edwards Air Force Base. The requirement is divided into eight separate solicitations covering T-2 Buckeye, A-4 Skyhawk, Daher Kodiak, Cirrus Vision Jet, Noorduyn Norseman, Systems Platform Aircraft, Lighter-Than-Air (airship or balloon), and Jet Glider services. These services are 100% set aside for total small businesses under NAICS code 611512. The government intends to award multiple BPAs based on a best value continuum, where technical acceptability—specifically the ability to provide services within the required timeframe—is prioritized over price. The ordering periods for these agreements vary between three and five years, with an option to extend services by six months. Each individual BPA is not anticipated to exceed $349,999.99 for its total specified period. Offerors must provide a one-year price list including aircraft ferry hourly rates, aircraft hourly rates, and instructor pilot rates. Performance may take place at Edwards AFB, the contractor's operating location, or within 250 miles of Edwards AFB. Quotes are due by October 1, 2026, at 3:30 PM PDT and must be submitted via email with a maximum file size of 10MB.

FA9304 Aftc Pzz

POSTED

DEADLINE

Sources Sought for an Experimental Aircraft Examiner (EAE)

Solicitation # 6973GH-26-R-EAE

The Federal Aviation Administration is conducting a market survey to identify capable sources for a turnkey, one-time flight training and qualification event to certify one Aviation Safety Inspector as an Experimental Aircraft Examiner. The requirement specifically centers on the Embraer EMB-314 Super Tucano and includes the provision of a fully airworthy aircraft with an active Experimental-Exhibition airworthiness certificate. The contractor must provide a minimum of 12 hours of ground instruction and 8 hours of advanced dual flight instruction, as well as all necessary operational logistics, including fuel, maintenance personnel, and a managed facility within the United States. All training and evaluations must adhere to 14 CFR Parts 61, 91, and 183, as well as FAA Orders 8000.95 and 8900.1. The performance period is a single, consolidated event not exceeding seven consecutive calendar days, which must be completed by September 30, 2026. This effort falls under NAICS code 611512 for Flight Training. Interested vendors must submit a capability statement detailing their training experience, SAM UEI number, years in business, geographic area of operation, and their proposed strategy for accomplishing the work. The FAA is using this survey to determine if there is sufficient competition to set aside the procurement for small businesses, service-disabled veteran-owned small businesses, or 8(a) certified firms. Responses are due by 5:00 p.m. CT on September 30, 2026.

6973GH Franchise Acquisition Svcs

POSTED

DEADLINE

99 AS G550 GFS Flight Simulator

Solicitation # FA286026Q4016

Solicitation FA286026Q4016 is a firm-fixed price request for quotation issued by the Department of the Air Force, 316th Contracting Squadron, for the procurement of one FlightSafety Gulfstream G550 Standard GFS simulator. The equipment will support the 99th Airlift Squadron at Joint Base Andrews, Maryland, providing training for pilots and flight engineers in systems integration, crew resource management, avionics, and normal, abnormal, and emergency procedures. The simulator must feature a graphically simulated cockpit measuring 10 feet wide by 10 feet long with an 8-foot ceiling, utilizing touchscreen monitors that resemble a C-37B cockpit. Technical requirements include FlightSafety MATRIX software, Honeywell EPIC 34.0.0 Cert H Avionics, and FMS Version NZ 7.1.2. The package also requires a standard G550 GFS spares package, one day of on-site training, and a two-year limited warranty. The contract will be awarded using the Lowest Price Technically Acceptable (LPTA) method, with a 10 percent price evaluation preference applied to HUBZone small business concerns. Offerors must submit their quotes via email by September 21, 2026, and provide a statement of technical capability and product specifications to ensure compliance with the salient characteristics. Delivery, installation, inspection, and acceptance will take place at Joint Base Andrews. Payment will be processed electronically through the Wide Area WorkFlow system. The procurement is subject to various federal regulations, including Buy American preferences and strict cybersecurity requirements for safeguarding covered defense information.

FA2860 316 Cons Pk

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Manufacture and Supply of Aircraft Stiffener Rib (P/N 2-7753-1)This subcontract involves the manufacture and supply of aircraft stiffener ribs, specifically part number 2-7753-1, for Department of Defense aerospace projects. The contractor is responsible for fabricating the ribs using precision CNC milling and turning in strict accordance with Engineering Drawing DWG EI-016479728 to ensure all aerospace tolerances are met. The opportunity is a total small business set-aside under NAICS code 336413 and is managed by the ASC Supplier Oper AE and AF Div. Eligible providers must possess a valid CAGE Code registration and demonstrate the capability to pass all required source inspection and acceptance protocols. The response deadline for this requirement is October 19, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Specialized Hardware Supplier - FF-S-107DThis subcontract opportunity, titled Specialized Hardware Supplier - FF-S-107D, involves the supply of hardware components for prime contractors supporting DLA supply contracts. The selected provider must manufacture or source parts that strictly adhere to the material and dimensional requirements of Federal Specification FF-S-107D Revision NR D, dated January 14, 2022. The scope of work requires manufacturing capabilities aligned with these federal specifications to ensure the delivery of compliant physical hardware. The contract is issued by the Department of Defense under the ASC Supplier Oper AE and AF Div and is designated as a Total Small Business Set-Aside per FAR 19.5. It falls under NAICS code 332722. The solicitation was posted on September 18, 2026, with a response deadline of October 2, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Precision Hardware Supplier - NASM51871This subcontract under the Department of Defense, specifically the ASC Supplier OE and AF Division, involves the supply of precision hardware components for prime contractors on DLA supply contracts. The supplier is responsible for manufacturing or sourcing part number MS51871-3 in accordance with National Aerospace Standard NASM51871 Revision NR 2. All components must be produced using precision machining or forming equipment to ensure strict adherence to aerospace tolerances, with each delivery requiring accompanying receiving reports and invoices. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332722. It was posted on September 18, 2026, with a response deadline of October 2, 2026. The contract focuses on the delivery of physical hardware components to support defense supply chain requirements.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

First Article Testing (FAT) and EvaluationThis subcontract opportunity, posted by the Department of Defense ASC Supplier Oper AE and AF Div, requires a provider to perform First Article Testing (FAT) for prime contractors on DLA Aviation projects. The primary objective is to validate structural plates by conducting testing in accordance with Section E08 and Drawing NR 98897. The selected provider must utilize specialized equipment to verify dimensional accuracy and structural integrity, and they must maintain certified testing laboratory status or possess approved in-house manufacturer capabilities. The final deliverables for this contract include the FAT Evaluation Report and certified test results. This is a Total Small Business Set-Aside under NAICS code 541380. Interested parties must submit their responses by the deadline of October 19, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

Aircraft Structural Plate Manufacturing/SupplyThis subcontract involves the manufacture and supply of aircraft structural plates for prime contractors supporting DLA Aviation projects. The specific requirement is for NSN 1560-01-281-6328, which must be produced according to TDP Rev C Gen 9 and Drawing NR 98897. All items must be packaged in accordance with ASTM D3951 or TQ requirement IP025 and delivered FOB Destination. The contract is a total small business set-aside under NAICS code 336413 for the Department of Defense. Successful providers must maintain approved source authorization and provide full supply chain traceability documentation. The response deadline for this opportunity is October 19, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Supply of Hexagon Cap Screws (NSN 5305-00-725-0154)This subcontract opportunity is for the manufacture or procurement of hexagon cap screws meeting NSN 5305-00-725-0154 specifications to support prime contractors delivering DLA supply contracts. The Department of Defense requires the physical supply of these items to be delivered within 144 days after the receipt of the order. All products must be packaged according to ASTM D3951 and labeled in compliance with MIL-STD-129. Eligible bidders must possess a valid CAGE code and SAM.gov certification. This is a total small business set-aside under FAR 19.5, categorized under NAICS code 334418. The response deadline for this solicitation is October 2, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Aircraft Skin Material SupplyThis subcontract, issued by the Department of Defense under the ASC Supplier Oper AE and AF Div, focuses on the supply of aerospace-grade aircraft skin materials for prime contractors on DLA aviation contracts. The selected provider must be an approved source or authorized distributor capable of delivering materials that meet specific part numbers and CAGE codes. All non-hazardous materials must be packaged according to ASTM D3951 standards, and the supplier is required to maintain comprehensive supply chain traceability documentation in accordance with clause C03. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 423840. Deliveries include both the physical aircraft skin materials and full provenance documentation sent to designated ship-to addresses. The response deadline for this solicitation is October 19, 2026.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

Supply of Duct Assembly, Start (NSN 1560-01-290-5140)This subcontract involves the manufacture and supply of 369,000 duct assemblies for prime contractors supporting Department of Defense DLA supply contracts. The production must strictly adhere to technical specifications for NSN 1560-01-290-5140, utilizing specialized tooling to ensure high-volume hardware quality. Compliance with RQ001 Higher Level Contract Quality Requirements is mandatory, with specific packaging and marking standards defined by RP001 and RQ017. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332999 and is managed by the ASC Supplier OE and AF Division. Interested parties must submit responses by October 4, 2026, for this requirement posted on September 18, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on DLA Aviation hardware contracts. The service provider is responsible for packaging fasteners according to ASTM D3951 and marking all shipments per MIL-STD-129 using compliant equipment and materials. The primary objective is to ensure all packaging meets Department of Defense transport and storage standards to facilitate agency acceptance. The opportunity is a total small business set-aside under NAICS code 339999 for the Department of Defense, specifically the ASC Supplier Oper AE and AF Div. The solicitation was posted on September 18, 2026, with a response deadline of October 2, 2026.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Supply of Close Tolerance Screws (PN: 5305-01-212-4553)This subcontract opportunity with the Department of Defense, specifically the ASC Supplier OE and AF Division, involves the supply of precision engineered close tolerance screws under part number 5305-01-212-4553. The contractor is responsible for manufacturing or sourcing these components using precision machining and turning equipment to meet strict aviation grade quality standards. Requirements include the verification of CAGE codes and manufacturer part numbers, with delivery quantities ranging from 350 to 2,100 units. The contract is designated as a total small business set aside under NAICS code 332722. Interested parties must submit their responses by October 2, 2026. This procurement supports prime contractors on DLA Aviation supply contracts to ensure the availability of critical hardware for aerospace applications.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Supply of Ring Spacers (NSN 5365-01-063-6859)This subcontract with the Department of Defense, specifically the ASC Supplier Oper AE and AF Div, involves the procurement of ring spacers under NSN 5365-01-063-6859. The selected provider is responsible for fabricating or sourcing these parts in strict accordance with the DLA Master List of Technical and Quality Requirements RA001 and must ensure all products are mercury-free per IP056. Additionally, the manufacturing facility must be registered with a valid CAGE code and deliver the items in compliant packaging. The opportunity was posted on September 18, 2026, with a response deadline of September 24, 2026. It falls under NAICS code 332999 and is managed through the DIBBS system.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Military-Grade Packaging and ShippingThis subcontract for Military-Grade Packaging and Shipping involves the specialized packaging and labeling of 1,000 hardware units for prime contractors under DLA supply contracts. The contractor is required to utilize ASTM D3951 materials and MIL-STD-129 compliant labeling systems to ensure all shipments are properly marked and delivered via F.O.B. Destination. The opportunity is issued by the Department of Defense through the ASC Supplier Oper AE and AF Div and is designated as a Total Small Business Set-Aside under NAICS code 493110. The response deadline for this requirement is October 19, 2026.

General Warehousing and Storage

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS