Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Defense was posted on September 11, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Aviation Instructional Design and SME Services

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 611512
New
Federal
Sources Sought for Douglas DC-3 Initial and Recurrent Pilot Training
Solicitation # 6973GH-27-R-DC3
The Federal Aviation Administration is conducting a market survey under solicitation 6973GH-27-R-DC3 to identify capable sources for commercial off the shelf initial and recurrent pilot qualification training for Douglas DC-3 aircraft. This training is intended for Flight Standards Service and Aircraft Certification Pilots and must be conducted using an FAA approved training program. The scope includes ground school and flight training via aircraft or full flight simulators to enable students to obtain unrestricted type ratings or pass pilot in command proficiency checks to Airline Transport Pilot standards. All training must comply with 14 CFR Parts 61, 121, 135, 141, and 142, as well as FAA Order 4040.9 and relevant Airman Certification Standards. Interested vendors must provide a capability statement including their SAM UEI number, years in business, past performance, the geographic area where training is provided, and their proposed strategy for the work. The primary NAICS code for this effort is 611512 for Flight Training. The contractor is responsible for providing all necessary aircraft, simulators, and materials, including the Pilot Operating Handbook, and must cover all operational costs such as fuel and landing fees. Performance will take place at the contractor facility, and payment is contingent upon the delivery of a Certificate of Completion to the Contracting Officer Representative. Responses to this survey are due by 5:00 p.m. CT on November 13, 2026.
6973GH Franchise Acquisition Svcs

POSTED

about 17 hours ago

DEADLINE

in about 1 year
NAICS: 611512
New
Federal
Spin and Spin Recovery Training
Solicitation # 6973GH-26-R-00243
The Federal Aviation Administration, through the Mike Monroney Aeronautical Center in Oklahoma City, is soliciting proposals for Spin and Spin Recovery Training (Course 21800090) for Aircraft Certification Flight Test Pilots and Flight Test Engineers. This is an Indefinite Delivery/Requirements contract featuring a one-year base period from December 27, 2026, to December 26, 2027, with four subsequent one-year option periods, for a total maximum duration of 66 months. Training must be conducted within the United States and consists of classes of four pilots, each receiving a minimum of four hours of ground school and two hours of aircraft flight training, with flight simulators provided if applicable. Award will be made to the Lowest-Priced Technically Acceptable (LPTA) offeror. To be deemed technically acceptable, offerors must provide a detailed training syllabus that complies with the Performance Work Statement and clearly identify specific turbine or piston-powered aircraft, as alternate aircraft will not be evaluated. Offerors must also provide proof of aircraft ownership or lease agreements. Technical and cost proposals are due electronically to Gilbert Park by 5:00 p.m. CST on November 27, 2026. Invoicing is managed through the Delphi eInvoicing web-portal and requires a Certificate of Training for each student to justify payment.
6973GH Franchise Acquisition Svcs

POSTED

about 17 hours ago

DEADLINE

in 29 days
NAICS: 611512
New
SLED
Pilot Certification and Training Services
Solicitation # IFB-060-3152603-CF
The County of Orange, through the Sheriff-Coroner agency, is soliciting competitive electronic bids for Pilot Certification and Training Services under solicitation number IFB-060-3152603-CF. The selected contractor must be an FAA-certified Part 61 and/or Part 141 flight school with at least ten years of business experience. The scope of work includes providing all classroom, airtime, ground, and simulator instruction, as well as all necessary course materials and examiner fees. Instructors must be CFIs and CFIIs with three to five years of experience. The contract is intended to run for three calendar years from the date of execution, with services performed at 4011 W. Commonwealth Ave. in Fullerton, California. Award will be granted to the lowest responsive and responsible bidder based on price, capability, past performance, and acceptance of the County's terms. Bidders must provide a valid UEI number, D-U-N-S number, and a SAM.gov confirmation dated within seven days of the bid deadline. Required documentation includes a certification regarding debarment, a W-9 form, and an active certificate from the California Secretary of State. The contract mandates compliance with various federal and state regulations, including the Clean Air Act for agreements exceeding 150,000 dollars, the Davis-Bacon Act, and the Americans with Disabilities Act. Payment will be made in arrears on a net thirty-day basis following written acceptance of services by the County.
Sheriff-Coroner

POSTED

1 day ago

DEADLINE

in about 1 month

AI Contract Overview

Show more

This subcontract for Aviation Instructional Design and SME Services involves the design and development of aviation-specific training curricula for C-40B and C-32A pilot transitions on Air Force projects. The scope of work includes creating storyboards, question banks, lesson plans, and scripts for nine distinct training lessons, while coordinating with the FAA and Boeing regarding command publications. Deliverables consist of comprehensive lesson plans and assessment banks to be performed at Andrews Air Force Base. Qualified personnel must hold valid FAA CFI certificates with B737 and B757 type ratings and possess a minimum of 1,000 flight instructor hours. This opportunity is categorized under NAICS code 611512 and is managed by the Department of Defense. Interested parties must respond by September 21, 2026.

General Info

Aviation instructional design for C-40B and C-32A pilot training at Andrews Air Force Base.

NAICS

611512 - Flight Training

Place of Performance

Andrews Air Force Base, MD, 20762, USA

Set-Aside

NONE

Documents

This scope was carved out of FA286026Q0029.

The full solicitation package (9 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

1 AS Special Air Mision Pilot Indoctrination Training

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA2860 316 Cons Pk
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Performs the design and development of aviation-specific training curricula for prime contractors on Air Force projects, specifically for C-40B and C-32A pilot transition. Develops storyboards, question banks, lesson plans, and scripts for nine training lessons. Coordinates with Boeing and FAA for command publications. Requires valid FAA CFI certificates with B737 and B757 type ratings and 1,000+ flight instructor hours. Delivers lesson plans and assessment banks.

More opportunities from Department Of Defense → FA2860 316 Cons Pk

Same awarding agency

NAICS: 811310
Federal
Overhead Hoist Maintenance Joint Base Andrews
Solicitation # SSNFA2860
The Department of Defense, through the 316 Cons Pk office, is issuing a sources sought notice for a small business set-aside contract to provide comprehensive maintenance, testing, and certification for overhead hoists and associated equipment at Joint Base Andrews and Davidsonville, Maryland. The scope of work requires the contractor to furnish all labor, transportation, equipment, and supervision for annual certified inspections and both routine and emergency service call repairs. All work must be performed by qualified technicians with formal training and must adhere to OSHA, ASME, ANSI, and DAFMAN 91-203 standards, as well as original equipment manufacturer specifications. Key deliverables include the submission of a Quality Control Plan within 15 calendar days of award and the provision of certification inspection certificates to the Contracting Officer's Representative within five business days of completion. For payment, the contractor must provide service tickets annotated by the COR and follow specific reimbursement protocols for parts, requiring a single invoice for items under 3,000 dollars and three competitive quotes for items exceeding that amount. Access to Joint Base Andrews requires the submission of detailed personnel and vehicle information, and strict adherence to installation security policies regarding prohibited weapons and controlled substances is mandatory.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

16 days ago

DEADLINE

in about 16 hours
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS