Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Flight Refueling Pod – Teardown, Test, and Evaluation

Active

Federal

Response Deadline08/18/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires comprehensive teardown, inspection, testing, and evaluation of flight refueling pods to assess their current condition and determine whether they are repairable or require replacement. This work involves detailed disassembly of the pods followed by rigorous diagnostic procedures to identify wear, damage, or component failure, ensuring all findings are thoroughly documented and analyzed to support maintenance and logistics decisions. The evaluation must be conducted to established technical standards to ensure airworthiness and operational readiness. Performance is to be completed at the designated location in Coffeyville, Kansas, with a response deadline of August 18, 2026. The contract is classified as a subcontract under the NAICS code 811212, which pertains to machinery and equipment repair and maintenance. It is managed by the Department of Defense through the FA8119 Afsc Pzabc office, indicating the work supports military aviation infrastructure. All activities must align with defense requirements, and contractors are expected to deliver precise results that enable informed decisions regarding fleet sustainment and resource allocation.

General Info

Teardown, inspect, test flight refueling pods in Coffeyville, Kansas by August 18, 2026 for repair or replace decisions.

Agency

Department Of Defense → FA8119 Afsc PzabcView Agency

NAICS

811212 - Computer and Office Machine Repair and MaintenanceView NAICS

Place of Performance

S Coffeyville, OK, 73145, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJun 18

subcontract

Response DeadlineAug 18

Submission deadline

Response Deadline

08/18/2026, 08:00:00 PM UTCin 23 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA8119 Afsc Pzabc

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA8119 Afsc Pzabc

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Conduct teardown, inspection, testing, and evaluation of flight refueling pods to assess condition and determine repairability.

Similar Contracts

Same NAICS industry code

On-Site Installation and ConfigurationThe contract requires on-site delivery, installation, configuration, and calibration of a microwave ablation system at the Washington DC VA Medical Center, ensuring the equipment is fully operational and seamlessly integrated with the SyngoVia software platform. All activities must be performed in person at the facility located in Washington, DC, with a zip code of 20422, to guarantee proper setup, functionality, and compatibility with existing medical systems. The work must result in complete operational readiness, including precise calibration and software synchronization, to support clinical use without disruption. This subcontract, identified under NAICS code 811212, was posted on July 25, 2026, with responses due by 5:00 PM ET on July 30, 2026. It is managed by the Department of Veterans Affairs through the 245-NETWORK Contract Office 5 (36C245). The contract does not specify a solicitation number or set-aside classification and lacks details on the point of contact or office address, but the place of performance is clearly defined as the medical center in Washington, DC. All deliverables are contingent upon successful on-site execution and certification of system integration.

245-NETWORK Contract Office 5 (36C245)

POSTED

DEADLINE

Alignment and Vibration Analysis ServicesPetrojam Limited has issued a subcontract for post-repair precision shaft alignment and vibration diagnostics services aimed at ensuring optimal pump performance, reliability, and longevity. The work requires highly specialized expertise to accurately align rotating shafts after maintenance and to conduct detailed vibration analysis that identifies imbalances, misalignments, and other mechanical issues affecting pump operation. These services are critical to minimizing downtime, extending equipment life, and maintaining operational efficiency in industrial pump systems. The contract is classified under NAICS code 811212, indicating it pertains to industrial and commercial machinery and equipment repair and maintenance. It was posted on July 25, 2026, under the Government of Jamaica’s procurement framework, with the place of performance and specific location details not provided. The solicitation is not subject to any set-aside designation and is accessible through the Jamaica Electronic Public Procurement System. All work must meet stringent technical standards to guarantee the integrity and performance of repaired pump systems in demanding operational environments.

Petrojam Limited

POSTED

DEADLINE

Subcontractor for DVBE/WBE/SB ParticipationThe contract requires the bidder to serve as a certified Disadvantaged Business Enterprise, Women’s Business Enterprise, or Small Business subcontractor to support the prime contractor in meeting state-mandated participation goals set by the California Office of Emergency Services. This subcontracting opportunity is tied to incentive targets under Cal OES contracting requirements, meaning the prime contractor’s ability to fulfill diversity and small business outreach obligations depends significantly on the subcontractor’s certified status and active involvement. The NAICS code 811212 indicates the nature of the work relates to personal and household goods repair and maintenance, suggesting the services provided will align with facility, equipment, or operational support functions under Cal OES programs. All proposals must be submitted by the deadline of August 18, 2026, and the opportunity is posted under the California eProcurement system with no solicitation number assigned. There is no specified set-aside designation or additional agency details provided beyond the overarching involvement of the California Office of Emergency Services. The place of performance and point of contact information are not defined in the posting, meaning the work location and communication channels may vary based on the prime contractor’s active projects. Participation requires valid and current certification as a DVBE, WBE, or Small Business, and the subcontractor must be prepared to demonstrate compliance with state certification standards and reporting requirements throughout the term of the subcontract.

Office of Emergency Services

POSTED

DEADLINE

DC Capacitor and Component Replacement ServicesThe contract involves providing replacement services for aging or failed DC capacitors and internal electronic components within uninterruptible power supply (UPS) units, to be performed during scheduled maintenance windows or in response to emergency failures. The work is critical to maintaining the reliability and operational integrity of UPS systems that support essential infrastructure under the jurisdiction of the California Office of Emergency Services. Services must be delivered promptly and in accordance with industry standards to ensure minimal downtime and continued power stability for mission-critical systems. The contract is classified as a subcontract under NAICS code 811212, indicating focus on electronic and precision equipment repair and maintenance. It was posted on July 24, 2026, with a response deadline of August 18, 2026, at 6:00 p.m. The scope covers both preventive and corrective maintenance activities across various locations under California's emergency services operations, though specific performance locations are not detailed. Bidders must possess the technical expertise and resources to handle high-voltage electronic components safely and efficiently, ensuring system longevity and compliance with operational safety requirements.

Office of Emergency Services

POSTED

DEADLINE

Emergency UPS Repair and 4-Hour Response SupportThe contract requires the provision of 24/7 emergency repair services specifically for Mitsubishi UPS systems to ensure continuous operation of mission-critical server infrastructure. A guaranteed four-hour on-site response time is mandated for all critical failures, emphasizing urgency and reliability in maintaining system uptime. This subcontract is issued under the Office of Emergency Services in California and is categorized under NAICS code 811212, which pertains to electronic and precision equipment repair and maintenance. The solicitation was posted on July 24, 2026, with responses due by August 18, 2026, and performance is expected to support essential operations without interruption across the state.

Office of Emergency Services

POSTED

DEADLINE

Mitsubishi-Certified UPS Preventative Maintenance ServicesThe contract entails the provision of Mitsubishi-certified preventative maintenance services for 2033C Series UPS units and associated battery cabinets, requiring scheduled quarterly, semi-annual, and annual service visits to ensure optimal operational performance. Tasks include comprehensive visual inspections, thermal imaging to detect heat anomalies, and detailed system diagnostics to identify potential failures before they impact critical infrastructure. All work must be performed by certified technicians with demonstrated expertise in Mitsubishi UPS systems to maintain equipment integrity and reliability. The services are required under a subcontract arrangement issued by the California Office of Emergency Services, with a response deadline of August 18, 2026, and a posted date of July 24, 2026. The North American Industry Classification System code 811212 applies, indicating the scope aligns with commercial and industrial machinery and equipment repair and maintenance. Performance location details are not specified, but the work is intended to support state emergency operations, and all maintenance activities must adhere to manufacturer standards and safety protocols to safeguard uptime and system availability across critical facilities.

Office of Emergency Services

POSTED

DEADLINE

AppleCare+ for Enterprise Support ServicesThe contract secures a three-year AppleCare+ support agreement for enterprise-grade MacBooks deployed across district sites, ensuring comprehensive technical assistance, hardware repairs, and streamlined warranty administration. Coverage includes on-site and remote support, replacement devices when necessary, and proactive maintenance services designed to minimize downtime and maintain operational continuity for critical users. The service scope is tailored to meet the needs of a large-scale organizational environment, with standardized procedures for issue escalation, device tracking, and service reporting. This subcontract, issued under the Mississippi Public Technology Acquisition Program, is classified under NAICS code 811212 for computer and office machine repair. The solicitation was posted on July 24, 2026, with responses due by August 13, 2026, and performance will be delivered across the state’s district locations without specified geographic limitations. While no set-aside preferences are indicated, the agreement is structured to ensure consistent, high-quality support across all enterprise devices under AppleCare+ terms, managed directly by the contractor on behalf of the agency.

POSTED

DEADLINE

On-Site Technical Support and CommissioningThe contract is for on-site technical support and commissioning to ensure the proper post-installation functioning of a system, with emphasis on validating wireless connectivity, pump operation, and seamless integration with Rockwell software. This work requires hands-on troubleshooting and performance verification to confirm that all components operate as intended in their deployed environment, with a focus on reliability, accuracy, and system interoperability. The technical team must be capable of diagnosing and resolving issues in real time to meet required performance benchmarks without delaying project timelines. This is a subcontract opportunity under NAICS code 811212, posted by Mississippi State University with a deadline for responses on August 7, 2026. The contract does not specify a physical location for performance, nor does it detail set-aside status or point of contact information. Potential bidders must be prepared to travel to the installation site and provide all necessary expertise, tools, and documentation to complete commissioning and validation tasks successfully, ensuring the system meets operational requirements upon handover.

MISSISSIPPI STATE UNIVERSITY

POSTED

DEADLINE

Hazardous Material Labeling and MarkingThis contract requires the application of standardized hazardous material labels and markings in full compliance with MIL-STD-129, encompassing detailed requirements for barcodes, unique identifier (UID) tags, Data Matrix symbols, and GHS-style hazard communication labels. All labeling must align with OSHA’s 29 CFR 1910.1200 regulations and accompanying Safety Data Sheet (SDS) guidelines to ensure proper identification, handling, and safety communication for hazardous substances. The work is to be performed under a subcontract arrangement for the Department of Defense, specifically through the Maritime Supply Chain office, with performance location set at FPO, 96667. The solicitation was posted on July 24, 2026, and responses are due by July 29, 2026, with the NAICS code 811212 indicating services related to industrial and commercial cleaning and maintenance operations, suggesting the labeling work supports logistics and storage infrastructure within defense supply chains.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Radar/Lidar Repair and Maintenance ServicesThe contract covers the diagnosis, repair, and routine maintenance of radar and lidar units exclusively using parts manufactured by LTI, ensuring compatibility, performance, and adherence to original equipment specifications. All work must be performed in strict compliance with state regulations and the manufacturer’s established standards, with complete documentation required for every service event to maintain accountability and traceability. The scope emphasizes technical precision and regulatory compliance, making thorough recordkeeping a critical component of service delivery. This subcontract is managed under the Massachusetts Traffic Programs agency, with performance centered at the location on Worcester Road in Framingham, ZIP code 01702. The solicitation remains open for responses until February 28, 2034, allowing for extended participation, and falls under the NAICS code 811212 for electronic equipment repair and maintenance. The contract does not specify a set-aside designation, and no point of contact information is provided, suggesting all communications should be directed through the official bidding platform linked in the data.

POLTRAF - Traffic Programs

POSTED

DEADLINE

in over 7 years

Onsite Installation, Training, and Acceptance TestingThe contract involves the physical installation of a CR system at NASA Armstrong, located in Edwards, California, with a zip code of 93523. The work includes full hardware setup, software calibration, and comprehensive training for government personnel on the proper operation and routine maintenance of the system. All tasks must be performed on-site to ensure seamless integration and functionality within NASA’s existing infrastructure. The installation and training components are critical to enabling the government team to independently manage the system post-acceptance. The contract is classified as a subcontract under NAICS code 811212, with a posted date of July 24, 2026, and a response deadline of July 29, 2026. The contracting organization is the NASA Shared Services Center, acting on behalf of the National Aeronautics and Space Administration. No set-aside information is specified, and the place of performance is strictly limited to the Edwards location. The recipient is expected to deliver a fully operational system supported by trained personnel who can sustain its performance without external assistance.

NASA Shared Services Center

POSTED

DEADLINE

On-Site Installation and Commissioning ServicesThe contract entails the delivery, installation, and operational verification of a CO₂ insufflator system at the Lebanon VA Medical Center, with required coordination with clinical staff to ensure seamless integration into existing medical workflows. The work must be performed on-site, and full operational verification is necessary to confirm that the system meets all technical and safety specifications for clinical use. The effort is classified as a subcontract under NAICS code 811212 and is managed by the Department of Veterans Affairs through the 244-NETWORK Contract Office 4. Performance is specifically required at the Lebanon, Pennsylvania location with ZIP code 17042. The solicitation was posted on July 24, 2026, and responses are due by July 31, 2026, at 3:00 PM Eastern Time. There is no specified set-aside type, and no point of contact details are provided. The contract is open for bidding under the federal contracting system, with all relevant details accessible via the provided SAM.gov link. All activities must be completed in accordance with federal healthcare equipment standards and facility protocols, and the successful vendor is expected to handle logistics, staffing, and post-installation validation without disruption to ongoing patient care operations.

244-NETWORK Contract Office 4 (36C244)

POSTED

DEADLINE

More opportunities from Department Of Defense → FA8119 Afsc Pzabc

Same awarding agency

Continuity of Operations (COOP) and Mission Essential Services Planning

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Surge Production and Capacity Planning Support

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Supply Chain Risk Management and Cybersecurity Compliance Support

Computer Systems Design Services

POSTED

DEADLINE

KC-135 Surge Suppressor Repair and Overhaul

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

The attached Sources Sought Synopsis is to support the repair of the KC_135_Surge_SuppressorThe U.S. Air Force, under the Department of Defense and managed by the FA8119 Afsc Pzabc office located at Tinker AFB, Oklahoma, is seeking sources to support the repair of the KC-135 Surge Suppressor. This procurement is identified by solicitation number KC_135_Surge_Suppressor_2 and falls under NAICS code 336413, which corresponds to aircraft manufacturing. The opportunity is posted as a sources sought synopsis with no set-aside designated, indicating it is open to all eligible businesses. Interested parties must submit responses by the deadline of July 30, 2026, at 5:00 PM Eastern Time. The primary point of contact is Mya Szymanski, with secondary support provided by Paula Perry, both reachable via U.S. Air Force email addresses. The work is expected to be performed at S Coffeyville, Oklahoma, with the same ZIP code as the office address, suggesting localized operations or logistical alignment. The official platform for viewing and responding to this solicitation is linked through SAM.gov.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Repair of B-2 Transponder Set NSN: 5895-01-383-4052 FW P/N: 159000-7The United States Air Force, through the Air Force Sustainment Center at Tinker Air Force Base, is issuing a firm-fixed-price indefinite-delivery, requirements contract for the repair of the B-2 Transponder Set, National Stock Number 5895-01-383-4052FW, part number 159000-7, manufactured by Northrop Grumman. The contract will have a three-year basic period with a one-time two-year option and a six-month extension option, with performance beginning on the date of award and concluding upon government acceptance of services. The procurement is restricted to a single source, Associated Aircraft Manufacturing and Sales, Inc. (CAGE 56540), under FAR 6.302-1 due to the unique expertise, proprietary test equipment, firmware, software, and certified personnel required to perform the repair, which no other contractor possesses. All work must be performed at the contractor’s facility, and delivery of repaired units is required FOB origin to the designated DoDAAC SW3211 at Tinker AFB, Oklahoma. The contract includes multiple line items: Line Item 0001 covers the repair of the transponder set with a best estimated quantity of six units during the basic period and four during option one, with two in the extension; Line Items 0002 through 0006 are non-recurring support functions including over and above work, data and reports, surge capacity, material lay-in, and repair management, each with a base quantity of one per period. The contract incorporates a comprehensive performance work statement detailing disassembly, cleaning, inspection, reassembly, ATP troubleshooting, and finishing actions, along with mandatory component replacement at the contractor’s expense for parts failing due to catastrophic, fatigue, or normal deterioration. Quality standards require compliance with ISO 9001-2015 and AS9100, and the contractor must adhere to MIL-STD-2073-1E for packaging and MIL-STD-130N for Unique Identification (IUID) marking, which is required only on the end item unless otherwise specified by engineering documentation. Technical data will not be provided by the government due to ownership restrictions. Payment will be processed electronically through WAWF using Secure File Transfer Protocol, Electronic Data Interchange, or web input, and the contractor must maintain a capable property management system per DFARS clauses 252.245

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

KC-135 Multipoint Refueling System RepairThis contract is a sole source, firm fixed price indefinite delivery/requirements contract for the repair of the KC-135 Multipoint Refueling System, issued by the Department of Defense’s FA8119 Afsc Pzabc office located at Tinker AFB, Oklahoma. The solicitation, numbered FA8119-26-R-0015, was posted on June 18, 2026, with a response deadline of August 18, 2026, and is categorized under NAICS code 336413 with no set-aside restrictions. The contract has a five-year performance period consisting of a one-year base period and four priced one-year options, with work to be performed primarily at the A SW3211 DLA Distribution Depot in Coffeyville, Oklahoma. The scope includes overhaul and repair of critical components such as control valves, winding handle assemblies, and material lay-in, along with labor services provided by a contract field team and remote engineering support. Deliverables must meet higher-level contract quality requirements using materials like aluminum alloy and steel, and all work is subject to inspection and acceptance at origin. Payment requests must be submitted electronically through Wide Area WorkFlow using specified formats, with payment processed under DoDAAC HQ339, and shipping terms are F.O.B. Origin. The contractor is required to comply with a comprehensive set of Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses covering termination for convenience, default, government property, purchasing system administration, sustainable products, prohibition of fluorinated fire-fighting agents, and cybersecurity standards including NIST SP 800-171. Offerors must maintain current representations and certifications in SAM, including business size status, Buy American compliance, foreign ownership disclosures, and anti-trafficking policies, and must provide certified and uncategorized cost data with formulas and forward pricing rates. All pricing must be in U.S. dollars with uniform profit percentages applied only to allowable and allocable costs, and several line items remain to be negotiated. Access to sensitive unclassified information is expected, and the contractor must adhere to all applicable ethical, trade, and security requirements outlined in the contract.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 month ago

DEADLINE

Fuel Access Door Assembly – RepairThe contract pertains to the repair of fuel access door assemblies identified by NSN 1560-99-087-4720 FL, encompassing a full range of maintenance activities including structural inspection, replacement of damaged or worn components, resealing to ensure integrity, and comprehensive functional testing to verify performance. The work must adhere to strict technical standards to ensure operational safety and reliability, with all repairs conducted in accordance with applicable military and aviation specifications. The repair effort is critical to maintaining aircraft readiness and supporting mission-critical operations within the Department of Defense. The procurement is structured as a subcontract under the NAICS code 811310, which classifies it under aircraft repair and maintenance services. It was posted on June 18, 2026, with a firm deadline for responses set for August 18, 2026, at 8:00 PM. The place of performance is specified as Coffeyville, Kansas, with a ZIP code of 73145, indicating the physical location where the repairs must be executed. The contracting activity is managed by FA8119 Afsc Pzabc under the Department of Defense, and while no specific point of contact or set-aside provisions are detailed, the requirement is open to qualified subcontractors capable of meeting technical, logistical, and compliance obligations.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 1 month ago

DEADLINE

Control Valve Overhaul and TestingThe contract pertains to the overhaul and testing of control valves with the national stock number 4810-99-754-3435, encompassing full disassembly, detailed inspection, necessary repairs, reassembly, and comprehensive functionality testing to ensure operational readiness. All work must adhere to strict technical standards and performance criteria to guarantee the valves meet required specifications after overhaul. The task is classified as a subcontract under NAICS code 332912 and is being managed by the Department of Defense through the agency FA8119 Afsc Pzabc, with performance required at a designated location in Coffeyville, Oklahoma, zip code 73145. Interested parties must submit their responses no later than August 18, 2026, at 8:00 PM Eastern Time, with the opportunity posted on June 18, 2026, and accessible via the SAM.gov portal for further details and submission.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 1 month ago

DEADLINE

Contract Field Team – Remote Engineering SupportThe contract titled Contract Field Team – Remote Engineering Support is a subcontract under the Department of Defense, managed by FA8119 Afsc Pzabc, aimed at providing remote engineering services including troubleshooting, technical analysis, and advisory support for systems governed by the agreement. Work is to be performed remotely with the official place of performance listed as S Coffeyville, 73145, though the nature of the services allows for execution from any location. Services are categorized under NAICS code 541330, which corresponds to engineering services, indicating a focus on specialized technical expertise rather than physical on-site presence. The solicitation was posted on June 18, 2026, with a response deadline set for August 18, 2026, at 8:00 PM Eastern Time, giving interested parties approximately two months to submit proposals. No set-aside type is designated, meaning the contract is open to all eligible contractors without preference for small businesses or other categories. There is no designated point of contact provided in the details, and the full terms and conditions must be reviewed via the official SAM.gov link for additional submission requirements and performance expectations.

Engineering Services

POSTED

about 1 month ago

DEADLINE

Winding Handle Component Replacement and Re-Greasing ServiceThe contract mandates the replacement of components within winding handle assemblies, the application of re-grease to all relevant mechanical parts, and the execution of thorough functionality testing to verify operational integrity. All work must ensure that the assembled units meet required performance standards after service, with attention to precision, reliability, and longevity of the repaired mechanisms. The task is scoped to address maintenance needs for specialized equipment, requiring skilled personnel familiar with mechanical systems and assembly protocols. This subcontract is issued under the NAICS code 332999 for other fabricated metal product manufacturing and will be performed at a designated location in Coffeyville, Oklahoma, with a zip code of 73145. The opportunity was posted on June 18, 2026, and all responses must be submitted by August 18, 2026, at 8:00 PM. It is managed by the Department of Defense through the office FA8119 Afsc Pzabc, and while no set-aside type is specified, interested parties must fulfill all technical and procedural requirements outlined in the solicitation to be considered for award.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 1 month ago

DEADLINE

KC-135 Multipoint Refueling System RepairThe United States Air Force, through the Air Force Sustainment Center at Tinker AFB, is seeking to contract for the repair, overhaul, and technical evaluation of components of the KC-135 Multipoint Refueling System under a firm fixed price requirements-type contract. The work encompasses a wide range of parts including fuel door assemblies, hose drum assemblies, aircraft pylons, torque drum units, gull-wing door assemblies, fairing assemblies, vane pump assemblies, drive units, control units, valves, flowmeters, motors, generators, and the flight refueling pod itself, with specific actions designated as test and technical evaluation, repair, in-storage maintenance, overhaul, or no fault found evaluations. All components are tied to specific NSNs and part numbers, and the work must be performed in accordance with engineering source approval standards maintained by the design control activity, with acquisition restricted to approved sources due to unique design and manufacturing capabilities. The contract will be performed at S Coffeyville, Oklahoma, with shipping instructions to be provided by the Production Management Specialist prior to any shipment of serviceable assets. The contract period spans a basic year with four one-year options, and the Government intends to issue the solicitation on or about June 10, 2026, with responses due by August 10, 2026, and an estimated award date of August 3, 2027. This is a sole source requirement directed to Cobham Mission Systems, identified by CAGE code U1918, although all responsible sources may submit capability statements for consideration under the sole source authority specified in RFO 5.101(c)(vi). Offerors must comply with data reporting requirements under Commercial Asset Visibility Air Force (CAV AF) and Contract Data Requirements List (CDRLs) DD FORM 1423, and must state their business size category, socioeconomic status, and ownership as U.S. or foreign-owned. Engineering source approval is mandatory and cannot be delayed pending qualification of other sources. The procurement will follow FAR Part 15 contracting by negotiation procedures, and electronic submission is required. An Ombudsman is available to address concerns during proposal development, and all inquiries must be submitted in writing via email. Contractor field teams, travel, engineering support, repair management, and over-and-above activities are included as separate line items alongside direct part repair and overhaul tasks.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE