This Government Contract opportunity from Government of Canada was posted on May 5, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Furniture Installation Services

Closed

International

Submission Closed05/12/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238990

New

Ruby Creek Park & Ride Construction

Solicitation # ruby-creek-park-ride-construction

The Ruby Creek Park and Ride Construction project, managed by James W. Fowler Co. for Kitsap Transit, involves the development of a 273-stall park and ride facility located near the intersection of SW Sedgwick Road and Sidney Road SW in Port Orchard, Washington. The scope of work encompasses the construction of a fully operational facility featuring bus shelters, a ticketing kiosk, restrooms, passenger vehicle chargers, inductive bus chargers, stormwater piping, CCTV, lighting, utilities, and landscaping. This solicitation is designated as a Small Business set-aside under NAICS code 238990. The project emphasizes inclusivity by encouraging the participation of minority, women, and disadvantaged business enterprises, with the prime contractor offering assistance in obtaining equipment, materials, bonding, and insurance to maximize M/W/DBE involvement. Additionally, the utilization of apprentices is encouraged. The solicitation was posted on September 19, 2026, with a response deadline of September 30, 2026.

POSTED

DEADLINE

52000QR260028802- CGC Oliver Henry Crane Services

Solicitation # 52000QR260028802

The United States Coast Guard Surface Force Logistics Center is requesting quotations for land-based crane services to support an engine swap aboard the CGC Oliver Henry at USCG Base Guam. This requirement is designated as an unusual and compelling urgency due to an emergent, unscheduled dry dock availability. The contractor must provide a certified hydraulic mobile crane, qualified operators, and rigging equipment to remove and install the NR1 Main Diesel Engine, attached awning, and soft patch. The engine weighs approximately 26,900 lbs and requires a reach of 28 to 30 feet from the pier. The period of performance is scheduled from September 28, 2026, to October 19, 2026. This procurement is a total small business set-aside under NAICS 238990 and will be awarded as a firm-fixed-price contract using simplified acquisition procedures. Award will be based on the best value to the government, considering price, specifications, quality, and past performance. The government reserves the right to award on an all-or-none basis. Qualified vendors must be registered in SAM.gov and submit a detailed cost breakdown, product data sheets, and warranty information by September 24, 2026, at 10 A.M. EST. Technical requirements include the submission of a crane lift plan and ground bearing pressure calculations. All personnel must hold an OSHA 10 certification or higher and adhere to ASME and OSHA safety standards. The contractor is responsible for providing proof of comprehensive insurance, including general liability and pollution liability. Final acceptance of the work is contingent upon the successful completion of all lifting operations, the restoration of the work area, and verification by the Contracting Officer’s Representative.

Sflc Procurement Branch 1(00080)

POSTED

DEADLINE

Sports Court Equipment Supplier and InstallerThis subcontract for the County of Hawaii Parks and Recreation department involves the supply and installation of tennis and pickleball court equipment for prime contractors on public works projects. The scope of work includes setting concrete anchors and installing posts, nets, and center tie-down straps, ensuring all equipment and dimensions strictly conform to United States Tennis Association and USA Pickleball regulations. The opportunity was posted on September 19, 2026, with a response deadline of October 16, 2026. Classified under NAICS code 238990, the contract requires the delivery of fully installed and anchored sports equipment to meet the specific standards of the governing sports bodies.

POSTED

DEADLINE

Synthetic Sports Court System InstallerThis subcontract for the Hawaii Department of Parks and Recreation involves the installation of multi-layer, water-based, polyurethane synthetic sports courts for public works projects. The scope of work includes sub-base preparation, the application of a resilient base mat, polyurethane sealer, structure layer, and a textured topcoat, concluding with professional striping for tennis and pickleball courts. All installations must adhere to ASTM F 2772 and EN 2813 standards to ensure quality and safety. The project requires the delivery of two completed courts, which must be backed by a 25-year manufacturer warranty. Interested parties must respond by October 16, 2026, under NAICS code 238990.

POSTED

DEADLINE

Herbert Shipman Park Tennis Court Resurfacing, FEMA-4366 DR-HI, DAMAGE #145122, PW54

Solicitation # PR-4700

The County of Hawai'i, through its Department of Parks and Recreation, is soliciting bids for the Herbert Shipman Park Tennis Court Resurfacing project (Job No. PR-4700), funded under FEMA-4366 DR-HI. The scope of work includes patching and repairing existing court surfaces, installing new net posts and anchors set in concrete, and applying new play court surfaces with striping for both tennis and pickleball. The project also involves repairing practice walls and replacing sports court equipment, including nets and tie-down straps, in accordance with USTA and USAP standards. Bidders must hold a valid State of Hawai‘i Specialty Contractor Classification C-3b or General Engineering Contractor A license. Electronic sealed bids are due by 2:00 p.m. HST on October 15, 2026, via the OpenGov Procurement Portal. Prospective bidders must submit a Notice of Intention to Bid ten calendar days prior to the opening and provide a Standard Qualification Questionnaire for Offerors if one has not been approved within the last twelve months. The contract is a lump sum award, with an additive alternate available for the installation of a multi-layer, water-based, polyurethane synthetic sports court system. Requirements include compliance with ADAAG, Davis-Bacon Act prevailing wages, and the provision of performance and payment bonds equal to 100% of the contract price, unless the bid falls below the small purchase threshold. Final project acceptance is contingent upon a joint inspection and the completion of a department-issued punch list.

POSTED

DEADLINE

Industrial Door Installation and Integration ServicesThis subcontract for Industrial Door Installation and Integration Services involves the removal and installation of 25 commercial industrial-grade doors for Caltrans maintenance station projects located in San Bernardino County. The scope of work includes the installation of rolling steel doors along with all necessary tracks, brackets, rollers, bearings, cables, and spring assemblies. To ensure durability, the project requires the use of heavy-duty structural steel guides and torsion springs rated for 100,000 cycles. The contractor must comply with the California Public Contract Code to deliver 25 fully operational industrial doors. This opportunity is associated with NAICS code 238999 and is managed under the California Department of Transportation. The response deadline for this project is October 2, 2026.

California Department of Transportation

POSTED

DEADLINE

Commercial Garage Door Installation & ReplacementThis subcontract for Commercial Garage Door Installation and Replacement supports prime contractors on Caltrans maintenance station projects located in San Bernardino County. The scope of work involves the removal and legal disposal of existing doors and the installation of operational commercial industrial doors, including sectional garage and rolling steel doors with dimensions ranging from 10x10 to 18x12. Additional requirements include the installation of full-view window sections, slide locks, and bumpers with steel brackets, with a mandate to verify all dimensions before fabrication. The opportunity is associated with NAICS code 238990 and is managed under the California Department of Transportation. Interested parties must submit their responses by October 2, 2026, at 8:00 PM.

California Department of Transportation

POSTED

DEADLINE

IFPQ Commercial Industrial Door Removal and Replacement Services, San Bernardino County

Solicitation # 08A4045

The California Department of Transportation (Caltrans) is soliciting bids under IFPQ 08A4045 for the removal and replacement of 25 commercial industrial-grade doors and operators at three maintenance stations in San Bernardino County: Blythe, Burnt Mill, and Cajon. This opportunity is set aside for certified Small Businesses (SB) or Disabled Veteran Business Enterprises (DVBE), and the awarded contractor must maintain this status throughout the agreement. The scope of work includes providing all labor, materials, equipment, and legal disposal necessary for a weathertight installation. Technical specifications require doors to be engineered for wind loads of at least 120 MPH, a minimum thermal value of R-17 for insulated sectional doors, and durability for at least 100,000 operating cycles. The estimated period of performance is from November 1, 2026, through October 31, 2027. The contract will be awarded to the responsible bidder providing the lowest price quote that meets all specifications, provided the total bid does not exceed the price ceiling of $484,000.00. Bidders must hold C-61 and D-28 licenses and be registered with the DIR. Key requirements include a minimum one-year warranty on materials and workmanship, adherence to California Building Code, and compliance with prevailing wage laws for bids exceeding $15,000. A payment bond is required for bids over $25,000. Payment is processed monthly in arrears, contingent upon the Caltrans Contract Manager's approval of the work and the cleanliness of the site. Required submission documents include the Price Quote Proposal, Bidder Certification Sheet, Non-Collusion Declaration, and various state certifications.

California Department of Transportation

POSTED

DEADLINE

IFPQ Commercial Industrial Door Removal and Replacement Services, San Bernardino County

Solicitation # 08A4046

The California Department of Transportation (Caltrans) is soliciting bids through Invitation for Price Quote 08A4046 for commercial industrial door removal and replacement services at two locations in San Bernardino County: the Fawnskin Maintenance Station and the Magana Ortega Maintenance Station. The contractor is responsible for providing all labor, materials, equipment, and permits to install securely fastened and weathertight sectional garage doors and operators. Technical specifications require that doors be engineered for 120 MPH wind load resistance and designed for heavy-duty industrial service with at least 100,000 operating cycles. All electrical work must comply with the California Electrical Code, and the contractor must provide a minimum one-year warranty on all materials and workmanship. This opportunity is set aside for certified Small Businesses, Microbusinesses, or Disabled Veteran Business Enterprises, and bidders must hold C-61 and D-28 licenses as well as DIR registration. The contract will be awarded to the responsible bidder offering the lowest price quote, provided the total bid does not exceed the price ceiling of 484,000.00 dollars. The estimated period of performance is from November 1, 2026, through October 31, 2027. Key administrative requirements include the submission of invoices in triplicate, the provision of certified payroll records for payment, and a payment bond if the bid exceeds 25,000.00 dollars. The deadline for quote submission is October 2, 2026, at 12:00 p.m. Pacific Time.

California Department of Transportation

POSTED

DEADLINE

Demolition Patching and Surface FinishingThis subcontract for Demolition Patching and Surface Finishing supports prime contractors on FEMA-4395-DR-HI projects under the Hawaii Parks and Recreation agency. The scope of work involves filling cavities and openings created by the demolition of wood and concrete components to ensure all patched surfaces match existing conditions. All work must provide seamless transitions between new and old materials in accordance with Section 01910. The project is categorized under NAICS code 238990. Interested parties must submit their responses by the deadline of October 16, 2026. Further details and application processes are managed through the Hawaii County procurement portal.

POSTED

DEADLINE

Roadside Signage and Object MarkersThis subcontract for the City of American Canyon Public Works department involves the supply and installation of permanent roadside signs and safety markers for prime contractors. The scope of work includes furnishing 120 square feet of 0.063 inch unframed single sheet aluminum signs, the installation of 14 signs on single posts, and the placement of 4 object markers according to established signage standards. The project is categorized under NAICS code 238990 and was posted on September 18, 2026. Interested parties must submit their responses by the deadline of October 8, 2026.

POSTED

DEADLINE

Fence ReconstructionThis subcontract for the City of American Canyon Public Works department involves the removal and reconstruction of project fencing for prime contractors on local road projects. The scope of work requires the reconstruction of 270 linear feet of fence lines, ensuring that all work matches existing fence types and adheres strictly to project design standards. The project is categorized under NAICS code 238990 and was posted on September 18, 2026, with a response deadline of October 8, 2026. The primary deliverable is the successful installation of 270 linear feet of reconstructed fencing.

Public Works

POSTED

1 day ago

DEADLINE

in 19 days

AI Contract Overview

The contract entails the on-site installation of furniture and storage systems at Royal Canadian Mounted Police facilities in Edmonton, including workstations, panel systems, work surfaces, and storage units, all to be executed in strict compliance with technical specifications and a defined master schedule. The work is classified as a subcontract under NAICS code 238990 and is part of the Government of Canada’s procurement efforts, with a response deadline of May 12, 2026, and a posting date of May 5, 2026. All installations must be performed at the designated RCMP locations in Edmonton, adhering to operational and safety standards required by the federal institution.

General Info

Furniture installation at RCMP Edmonton facilities, adhering to technical specs and master schedule deadlines.

Agency

Government of Canada → Royal Canadian Mounted PoliceView Agency

NAICS

238990 - All Other Specialty Trade ContractorsView NAICS

Place of Performance

Edmonton, CAN

Set-Aside

NONE

Documents

This scope was carved out of M5000-26-05389/A.

The full solicitation package (9 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

OFFICE FURNITURE - Edmonton

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedMay 5

subcontract

Response DeadlineMay 12

Deadline has passed

Submission Closed

05/12/2026, 09:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Royal Canadian Mounted Police

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → Royal Canadian Mounted Police

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

On-site installation of work stations, panel systems, work surfaces, and storage units at RCMP facilities in accordance with technical specs and master schedule.