This Combined Synopsis/Solicitation opportunity from National Aeronautics And Space Administration was posted on June 23, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Gantry Proof Loading Services

Awarded

80NSSC25907192QFederal

Submission Closed06/30/2025, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

DIBBS

Specialized Testing Laboratory (First Article Test)

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

First Article Test (FAT) Laboratory ServicesThis subcontract for First Article Test Laboratory Services supports the DLA Weapons Support Nuclear Reactor Program. The selected provider will perform First Article Testing on a single unit of electrical insulation to ensure full compliance with MIL-I-24768/1(1) standards. This process involves utilizing specialized thermal resistance and dielectric testing equipment to validate the component, culminating in the delivery of one validated test unit and a certified First Article Test report. Eligible contractors must hold ISO 9001:2015 or ISO/IEC 17025 certification to qualify for the work. The performance of these services is located at Hill AFB. Interested parties should note the response deadline of November 9, 2026, for this Department of Defense requirement categorized under NAICS code 541380.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Material Testing and Certification LaboratoryThis subcontract for the DLA Weapons Support Land Supply Chain involves providing Material Testing and Certification Laboratory services to perform Production Lot Testing for prime contractors. The primary objective is to validate the quality conformance of O-rings by reviewing material certifications, process operation sheets, and inspection method sheets. Specific technical requirements include verifying asbestos-free composition and ensuring surface imperfections adhere to ISO 3601-3 standards, culminating in the delivery of a comprehensive Test Report. The project is based in Keyport, Washington, and falls under NAICS code 541380. Due to the nature of the technical data handled during the certification process, the contractor must maintain CMMC Level 2 compliance. Interested parties should note the response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

First Article Testing (FAT) ServicesThis subcontract for First Article Testing services is issued by the Department of Defense through the DDSP New Cumberland Facility. The selected contractor will perform quality conformance inspection and testing for prime contractors delivering DLA supply contracts, specifically focusing on one prototype unit. Using laboratory equipment, the contractor must verify material specifications, durability, and pressure in strict accordance with MIL-H-24580. The scope of work requires the delivery of a comprehensive test report and one validated First Article unit, with all test results provided to the Engineering Support Activity. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380. Performance will take place in New Cumberland, Pennsylvania, with responses due by November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

First Article Testing and Inspection Services

Defense Logistics Agency

POSTED

DEADLINE

Electrical Testing and Certification LaboratoryThis subcontract opportunity is for an Electrical Testing and Certification Laboratory to provide independent verification and testing of cable assemblies for prime contractors supporting DLA Weapons Support ASC projects. The scope of work involves conducting Product Verification Testing, which includes electrical continuity, voltage withstand, and physical dimension checks. All sampling and inspections must be performed using calibrated measurement tools in accordance with MIL-STD-1916 or ASQ H1331 standards, culminating in the delivery of formal test reports and certifications of compliance. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, this requirement is designated as a Total Small Business Set-Aside under NAICS code 541380. The solicitation was posted on October 28, 2026, with a response deadline of November 12, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Production Lot Testing and Quality ReportingThis subcontract for Production Lot Testing and Quality Reporting supports the DLA Weapons Support Fluid Handling Division. The selected provider will perform specialized production lot testing and inspections for prime contractors, utilizing pressure testing and leak detection systems. All work must adhere to zero-based sampling plans, specifically MIL-STD-1916, and culminate in the delivery of certified test results and detailed Production Lot Test reports. The project is based in San Diego, California, and falls under NAICS code 541380. Due to the nature of the sensitive data involved, the contractor is required to maintain CMMC Level 2 certification. Interested parties must submit their responses by November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

First Article Testing (FAT) and Thread Gaging Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

HazMat Identification and SDS DocumentationThis subcontract opportunity with the Department of Defense at the DDSP New Cumberland Facility involves providing hazardous material identification and documentation services for prime contractors on DLA Troop Support projects. The selected provider will be responsible for identifying hazardous materials in accordance with Federal Standard No. 313 and preparing Safety Data Sheets that comply with 29 CFR 1910.1200(g). Additionally, the contractor must provide hazard warning labels as required by DFARS 252.223-7001 and deliver all completed SDS and HazMat identification lists. The project falls under NAICS code 541380 and will be performed in New Cumberland, Pennsylvania. Interested parties should note that the solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Production Lot Test (PLT) and Quality CertificationThis subcontract for the Department of Defense, specifically DLA DIST San Joaquin, involves providing specialized testing and quality assurance validation for prime contractors on DLA supply contracts. The scope of work focuses on executing Production Lot Test requirements in accordance with MIL-STD-1916 or ASQ H1331, Table 1, which includes assigning verification levels for critical, major, and minor attributes. The selected provider must possess JCP Certification to access technical data and maintain the necessary laboratory equipment for gas filter validation. Key deliverables for this engagement include the submission of PLT reports, material certifications, and detailed inspection sheets. The performance of these services will take place in Tracy, California. Interested parties should note the response deadline of November 9, 2026, for this opportunity categorized under NAICS code 541380.

POSTED

DEADLINE

Specialized Testing and Certification ServicesThis subcontract for Specialized Testing and Certification Services involves performing First Article Testing for prime contractors on DLA Troop Support projects. The primary objective is to validate hoisting beam specifications by executing tests under CLIN 0002, utilizing calibrated measurement equipment and load testing rigs to ensure dimensional accuracy, load capacity, and overall structural integrity. The selected provider is responsible for delivering an approved First Article along with a comprehensive FAT Certification Report and certification of compliance. This project is managed under the Department of Defense for Construction and Equipment Manufacturing and is to be performed in Tracy, California.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Non-Destructive Testing (NDT) and Inspection

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days

AI Contract Overview

This contract involves the procurement of Gantry Proof Loading Lifting Winch and related facility hardware for the Landing and Impact Research facility at NASA Langley Research Center. The project is specifically designated as a small business set-aside under the NAICS code 541380, emphasizing the opportunity for small enterprises to participate. The solicitation, titled "Gantry Proof Loading Services," was posted on June 23, 2025, with a response deadline of June 30, 2025. All communications regarding the solicitation should reference Notice ID 80NSSC25907192Q and be directed to the designated point of contact, Laura Quave, via email or phone. The contract is managed by the NASA Shared Services Center located at Stennis Space Center in Mississippi. The procurement aims to fulfill specific technical and hardware requirements for the Gantry Proof Loading system, essential for testing and research activities related to landing and impact assessments. Interested vendors are encouraged to review the detailed RFQ and Statement of Work attached to the solicitation for comprehensive specifications and submission instructions.

General Info

NASA seeks small business for gantry lifting winch hardware by June 30, 2025, US only.

Agency

National Aeronautics And Space Administration → NASA Shared Services Center

Contract Value

$19,507

NAICS

541380 - Testing Laboratories and Services

Place of Performance

MS, USA

Set-Aside

SBA

Awardee

SCOFIELD GROUP, LLC

Award Issued Date

07/10/2025, 12:00:00 AM UTC

Documents

RFQ 80NSSC25907192Q - Gantry Proof Loading Services

33 pages · rfq

High

SOW for Proof Loading Lifting Winch and Facility Hardware - NASA LaRC

sow

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded

PostedJun 23

Combined Synopsis

AwardedJul 10

Contract was awarded

Submission Closed

06/30/2025, 07:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

Contacts1 person available

OfficeSTENNIS SPACE CENTER, MS, 39529, USA

Organization / AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

Office AddressSTENNIS SPACE CENTER, MS, 39529, USA

Contacts

laura quave

contact@example.gov

+1 (555) 000-0000

Full Description

See attachements for complete details for the RFQ and Statement of Work. This requirement is for Gantry Proof Loading Lifting Winch and Facility Hardware at the NASA Langley Research Center Landing and Impact Research. This procurement is set aside for small business. All correspondence should reference Notice ID 80NSSC25907192Q in the subject line.

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

Gantry Proof Loading Services

Contract Overview

Active Opportunities Like This One

AI Contract Overview

General Info

Documents

AI Contract Breakdown

Contract not broken down yet

Timeline

Find active opportunities like this

Organization & Contact Information

Full Description

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Earlier notices in this NAICS code

Get AI-powered intelligence on the opportunities still open