This Government Contract opportunity from Department Of Energy was posted on August 3, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Gas Delivery and Environmental Control Subsystem

Closed

Federal

Submission Closed08/14/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE8E5-27-T-0229

Solicitation SPE8E5-27-T-0229 is a fixed-price request for quotations issued by DLA Troop Support Construction and Equipment for the procurement of 47 units of tungsten welding electrodes. The required items must have a 0.094 inch diameter, a length of 7 inches, and a clean finish. Technical compliance is mandated according to AWS A5.12M/A5.12-09 and quality assurance standard QAP 13873 QAP-127. The unit of issue is defined as a case of 10 each. Delivery is required FOB Origin to DLA Distribution San Joaquin in Tracy, California, with an original required delivery date of March 12, 2027, and a need ship date of April 12, 2027. Inspection and acceptance will occur at the destination. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA requirement RP001. The contract incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information, Buy American Act compliance, and the use of the Wide Area WorkFlow system for electronic invoicing and payment.

POSTED

DEADLINE

ELECTRODE, CUTTING, SOLI

Solicitation # SPE8E5-27-T-0194

Solicitation SPE8E5-27-T-0194 is a request for quotations issued by DLA Troop Support, Construction and Equipment for the procurement of 22 boxes of solid cutting electrodes, identified by NSN 3439014118393 and Broco Inc part number PC/1418-100. Each box contains 137 units. The procurement is categorized under NAICS 333992 and requires delivery to DLA Distribution Red River in Texarkana, Texas. The required delivery date is April 21, 2027, with a need ship date of April 12, 2027, and a delivery window of 167 days. Shipping terms are FOB Origin, and both inspection and acceptance will occur at the destination. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and RP001. Non-hazardous materials must follow ASTM D3951, while hazardous materials require packaging per TQ requirement IP025 and labeling according to the Hazard Communication Standard. Technical and quality requirements are governed by the DLA Master List. Administratively, the contractor must use the Wide Area Workflow system for electronic invoicing and payment requests. Compliance with the Buy American Act, Berry Amendment, and NIST SP 800-171 cybersecurity standards is required. All quotes must be submitted via the DIBBS portal.

RED RIVER RECEIVING BLDG

POSTED

DEADLINE

BRAZING ALLOY, NICKEL

Solicitation # SPE8E6-27-T-0281

Solicitation SPE8E6-27-T-0281 is a fixed-price request for quotations issued by DLA Troop Support Construction and Equipment for the procurement of nickel brazing alloy in powder form. The requirement consists of 11 units, with each unit defined as 5 lbs, under NSN 3439002568239. The material must strictly adhere to technical standard SAE AMS477K Revision K dated October 1, 2023. Delivery is required within 167 days after order, with a need ship date of April 12, 2027, and a final required delivery date of June 14, 2027. The shipment is FOB Origin and will be delivered to DLA Distribution San Joaquin in Tracy, California. The contract mandates rigorous compliance with DLA packaging and marking standards, specifically MIL-STD-129 and RP001. Non-hazardous materials must follow ASTM D3951, while hazardous materials must comply with FED-STD-313 and TQ requirement IP025. Key administrative and security requirements include a CMMC Level 2 Self-Assessment, safeguarding of covered defense information, and adherence to the Buy American Act and Berry Amendment. Inspection and acceptance will occur at the destination. All quotes must be submitted via the DIBBS portal, and payment will be processed electronically through the Wide Area WorkFlow system.

POSTED

DEADLINE

Draft Solicitation - Aberdeen Test Center Welding, Machining, Painting, and Fabrication Services

Solicitation # W91CRB-27-R-A002

Solicitation W91CRB-27-R-A002 is an indefinite-quantity request for non-personal welding, machining, painting, and fabrication support services for the U.S. Army Aberdeen Test Center at Aberdeen Proving Ground, Maryland. The scope of work includes fabrication and finishing, powder coating, painting of buildings and equipment, and the production of signage and insignia to support various cores such as Automotive, Live Fire, and Warfighter. The contract is a total small business set-aside under NAICS 333992, with an estimated total value of 5,000,000 dollars. The period of performance consists of a 45-day phase-in, a 57-month ordering period running from approximately December 2026 through December 2031, and a 45-day phase-out. Award will be based on the Lowest Price Technically Acceptable (LPTA) process, requiring an acceptable rating in both technical and past performance factors. The pricing structure utilizes a mix of Time and Materials (T&M) and Firm Fixed Price (FFP) task orders. Contractor performance will be monitored via a Quality Assurance Surveillance Plan, and all invoicing must be processed through the Wide Area WorkFlow system. Key requirements include the management of Government Furnished Property, adherence to strict labor qualifications and certifications, and the submission of a comprehensive proposal consisting of four volumes, including technical approach, past performance, price, and required certifications.

POSTED

DEADLINE

MIL-DTL-19933F, Electrodes and Rods - Welding, Bare, Chromium and Chromium-Nickel Steels

Solicitation # N0002426SN-70

POSTED

DEADLINE

Welders and Guns for Hammond Bids must be for exact items. NO SUBSTITUTIONS

Solicitation # 40023-S27005

Solicitation 40023-S27005 is an invitation for bids issued by Northshore Technical Community College for the procurement of specific welding machinery and accessories for the Hammond Campus. This is a proprietary, brand-name-only bid that strictly prohibits substitutions. The required items include three 12 FT to 7 FT M Connector Cables (K2910-2), ten Magnum Pro 250L Welding Guns (K4874-2), three Magnum Pro 15 FT push/pull guns (K4797-1), and two Power Wave 300C Advanced Education One Paks (K4934-1). Bids must be submitted by November 16, 2026, at 11:00 AM via post or email to Richard Butler. The contract is governed by Louisiana state laws and purchasing regulations, including L.R.S. 39:1551–1736, and allows for preferences for products manufactured or assembled in Louisiana. Awardees must provide complete pricing, including prepaid transportation to the destination, with prices remaining firm for at least 30 days. Delivery cannot occur before July 1, 2026. Payment will be made within 30 days of delivery or invoice receipt via electronic funds transfer, LaCARTE card, or check. The agreement may be extended for two additional 12-month periods, not to exceed a total term of 36 months, and the college reserves the right to cancel the contract with 30 days' written notice.

- Comm/Tech College - Northshore Technical Community College

POSTED

DEADLINE

Welders and Guns for Livingston Bids must be for exact items. NO SUBSTITUTIONS

Solicitation # 40023-S27006

Solicitation 40023-S27006 is an invitation for bids issued by Northshore Technical Community College for the procurement of specific welding machinery and equipment to be delivered to the Walker Campus. This is a proprietary, brand-name-only solicitation where no substitutions are accepted. The required items include a Keen K-200 Rod Oven, Wilton Mechanics Pro Vices, Lincoln Power Mig and Power Wave units, connector cables, Magnum Pro push-pull guns, and a Victor cutting machine. Bids must be submitted by November 16, 2026, at 11:00 AM via post or email to the Lacombe STEM Campus. The contract is governed by Louisiana state laws, including L.R.S. 39:1551–1736, and allows for preferences for products manufactured or assembled in Louisiana. Award may be made on an all-or-none, grouped, or separate item basis. Bid prices must include prepaid transportation to the destination and remain firm for at least 30 days. Delivery cannot occur before July 1, 2026. Payment will be processed within 30 days of delivery or invoice via EFT, LaCARTE card, or check, using FY 27 funds. The agreement may be extended for two additional 12-month periods, not to exceed a total term of 36 months, and the college retains the right to cancel the contract with 30 days' written notice.

- Comm/Tech College - Northshore Technical Community College

POSTED

DEADLINE

Solicitation # SPE7M1-27-T-0537

Solicitation SPE7M1-27-T-0537 is a fixed-price request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of 22 power transformers. The required items are identified as critical application items, specifically Gas Equipment Engineering 96101 part number 42-1338, under NSN 5950-00-613-4285. The original required delivery date is May 9, 2028, with a need ship date of April 6, 2027. Delivery is set for FOB Origin, with inspection and acceptance occurring at the destination, the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with a specific requirement for delicate instrument labeling. Compliance with NAVSEA 5100-003D is required to ensure no mercury or mercury-containing compounds are intentionally added to the hardware. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Offerors must submit quotes via the DIBBS portal and comply with various federal regulations, including the Buy American Act, DFARS cybersecurity standards for safeguarding covered defense information, and prohibitions on acquiring certain services from Russia.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M1-27-T-1330

Solicitation SPE7M1-27-T-1330 is a request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of 4,262 feet of wire braid, identified as NSN 6145001705274 and part number C2-0083. This is a critical application item classified as Commercial Off The Shelf (COTS). The material must be provided in continuous lengths of 100 feet per spool. Delivery is required within 168 days after receipt of order, with a need ship date of April 20, 2027, and a final required delivery date of May 7, 2027. Shipping is FOB Origin to DLA Distribution Warner Robins in Georgia. The contract mandates strict adherence to technical and quality requirements, including MIL-DTL-12000 for cable and wire preservation and MIL-STD-129 for marking. Packaging must comply with MIL-STD-2073-1E and RP001 DLA packaging requirements. A critical restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware or packaging. Inspection and acceptance will occur at the destination. Offerors must submit quotes via the DIBBS portal and comply with the Buy American Act and Berry Amendment. Payment will be processed electronically through the Wide Area WorkFlow (WAWF) system.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M1-27-T-1368

Solicitation SPE7M1-27-T-1368 is a fixed-price procurement issued by the DLA Weapons Support Maritime Supply Chain for six power transformers, specifically Abbott Technologies, Inc part number 80P433CT. This critical application item must be delivered in accordance with TDP Rev A Gen 1. The contract requires delivery to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with a required delivery date of March 31, 2027, and a need ship date of April 20, 2027. Shipping is based on FOB Origin, and the delivery timeframe is specified as 168 days after receipt of order. Quality assurance is stringent, requiring destination inspection and acceptance. Sampling must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan, with acceptance based on zero non-conformances. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific prohibitions against the intentional addition of mercury except in approved functional cases. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, including the Buy American Act, cybersecurity reporting under DFARS 252.204-7012, and NIST SP 800-171 assessment requirements.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE8E5-27-T-0284

Solicitation SPE8E5-27-T-0284 is a Request for Quotations issued by the Defense Logistics Agency Troop Support Construction and Equipment for the procurement of one welding nozzle, identified by NSN 3431-01-425-0919. The requirement is not a small business set-aside and falls under NAICS code 333992. The item is to be delivered FOB Origin to Camp Humphreys in Pyeongtaek, South Korea, with a required delivery timeline of 20 days after award. Both inspection and acceptance will occur at the destination, governed by FAR 52.246-1. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129, and requires compliance with RP001 for palletization. Technical and quality requirements are governed by the DLA Master List, and the contractor must ensure that mercury is not intentionally added to the hardware. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system. Key regulatory compliance includes the Buy American and Balance of Payments Program, the Berry Amendment, and specific representations regarding covered telecommunications equipment under FAR 52.204-24 and DFARS 252.204-7016.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE8E6-27-T-0319

Solicitation SPE8E6-27-T-0319 is a request for quotations for the procurement of welding rods made of nickel alloy, specifically part number AMS5798-1-16. The material specifications require a diameter of 0.062 inches and a length of 36 inches, adhering to SAE AMS5798J Revision J. The requirement consists of 13 units of issue, where one unit is defined as 10 pounds. The delivery is scheduled for 110 days after order, with a need ship date of February 21, 2027, and a required delivery date of February 24, 2027. Shipping is FOB Origin, with the final destination being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and RP001. Hazardous materials must be packaged per TQ requirement IP025 and FED-STD-313, while non-hazardous materials follow ASTM D3951. Inspection and acceptance will occur at the destination. This is not a small business set-aside, though HUBZone preferences apply. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and DFARS cybersecurity requirements for safeguarding covered defense information. Invoicing and receiving reports must be processed through the Wide Area WorkFlow system.

DDSP NEW CUMBERLAND FACILITY

POSTED

7 days ago

DEADLINE

in 5 days

AI Contract Overview

The contract calls for the design and supply of a gas mixing, delivery, and exhaust system engineered to maintain precise atmospheric conditions within a sample chamber, ensuring controlled environmental parameters critical to experimental reliability. This subsystem must integrate seamless gas blending capabilities, accurate flow control, and safe exhaust management to support high-precision research operations, likely related to materials science or advanced analytical processes conducted at Argonne National Laboratory. The system must meet stringent technical specifications for purity, stability, and responsiveness to dynamic experimental demands. The contract is a subcontract issued under the Department of Energy through its contractor, Argonne National Laboratory, with performance required at Lemont, Illinois, zip code 60439. Classified under NAICS code 333992 for other commercial and industrial machinery and equipment manufacturing, the solicitation was posted on August 3, 2026, and responses are due by August 14, 2026, at 5:00 p.m. The scope focuses exclusively on the engineering, fabrication, and delivery of the environmental control subsystem, excluding broader contract responsibilities such as installation or long-term maintenance unless otherwise implied by technical requirements. Proposals must demonstrate technical competence in gas system design and compliance with laboratory-grade standards for contamination control and operational safety.

General Info

Design and supply gas mixing and exhaust system for precise environmental control at Argonne National Laboratory, Lemont, IL.

Agency

Department Of Energy → Argonne National Labor - DOE Contractor

NAICS

333992 - Welding and Soldering Equipment Manufacturing

Place of Performance

Lemont, IL, 60439, USA

Set-Aside

NONE

Documents

This scope was carved out of 6-S176-Q-00381-00.

The full solicitation package (7 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Custom-Engineered In-Situ Liquid/Electrochemistry and Heating/Biasing/Gas Sample-Environment Systems

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedAug 3

subcontract

Response DeadlineAug 14

Deadline has passed

Submission Closed

08/14/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Energy → Argonne National Labor - DOE Contractor

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Energy → Argonne National Labor - DOE Contractor

Office AddressN/A

ContactsNo contact information available

Full Description

Design and supply of a gas mixing, delivery, and exhaust system to maintain precise atmospheric conditions within the sample chamber.

More opportunities from Department Of Energy → Argonne National Labor - DOE Contractor

Same awarding agency

NAICS: 444180

Federal

Construction Material SupplierThis subcontract opportunity is for a construction material supplier to provide essential resources, including lumber, steel, piping, and electrical components, to prime contractors working on facility projects at Argonne National Laboratory in Lemont, Illinois. The selected supplier is responsible for delivering certified compliant materials directly to the project site. A critical requirement of this contract is strict adherence to the Buy American Requirement for construction materials as specified in FAR 52.225. Interested parties must submit their responses by the deadline of November 11, 2026, for this Department of Energy related project.

Other Building Material Dealers

POSTED

14 days ago

DEADLINE

Gas Delivery and Environmental Control Subsystem

Contract Overview

Active Opportunities Like This One

AI Contract Overview

General Info

Documents

AI Contract Breakdown

No documents to break down

Timeline

Find active opportunities like this

Organization & Contact Information

Full Description

More opportunities from Department Of Energy → Argonne National Labor - DOE Contractor

Earlier notices in this NAICS code

Get AI-powered intelligence on the opportunities still open