Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from General Services Administration was posted on October 25, 2018. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

HAND OPERATED STRAPPING & SEALING KITS

Awarded
RFQ1277531Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333993
New
Federal
Vertrod Thermal Impulse Pneumatic Heat Sealer SupplierThis 8(a) sole source subcontract through the NASA Shared Services Center involves the procurement of two Vertrod 48 PS Thermal Impulse Pneumatic Pivot Style Heat Sealer Machines for prime contractors operating at the NASA-Stennis Space Center. The required equipment must feature 48 inch seal lengths in both 3/8 inch and 1/2 inch widths, single side heater bars, and pneumatic low pressure jaw close safety systems. To meet operational standards, all machines must be compatible with ISO7 clean room environments. The supplier is responsible for delivering two fully configured and tested units, which include a 3 year limited warranty. This procurement falls under NAICS code 333993 and was posted on October 28, 2026, with a response deadline of November 2, 2026.
NASA Shared Services Center

POSTED

about 17 hours ago

DEADLINE

in 5 days
NAICS: 333993
New
Federal
Sealing Machines for CHOP Shop
Solicitation # 80NSSC26948111Q
NASA Shared Services Center is seeking to procure two Vertrod 48 PS Thermal Impulse Pneumatic Pivot Style Heat Sealer Machines for the Critical Hardware Operational Processing shop at the Stennis Space Center. These machines will be used to create airtight and watertight seals for poly and aclar bags containing fittings, seals, o-rings, and crush washers, with one unit designated for a general clean room and the other for a newly constructed ISO7 clean room. The required equipment must be made in the USA, feature 48-inch seal lengths with one machine at 3/8 inch width and one at 1/2 inch width, and include a pneumatic low-pressure jaw close safety system, safety switch indication lights, and a three-year limited warranty. This procurement is being conducted under NAICS code 333993 as a commercial item acquisition following FAR Part 12. NASA intends to award a sole source contract to Government Affairs Institute, Inc. under the authority of FAR 12.102(a) and FAR 19.8 as an 8(a) set-aside. Interested organizations must submit capability statements to the primary point of contact, McKenzie Hanson, by 3:00 p.m. CST on November 2, 2026, to determine if the procurement will be competed. All items are to be shipped to Building 9166 at the Stennis Space Center in Mississippi.
NASA Shared Services Center

POSTED

about 17 hours ago

DEADLINE

in 5 days
NAICS: 333993
New
DIBBS
Supply of Filler Opening Cap (NSN 5340016340030)This subcontract involves the sourcing or manufacture of a Filler Opening Cap, identified by NSN 5340016340030, to support prime contractors delivering for the DLA Weapons Support Land Supply Chain under the Department of Defense. The selected provider must ensure the component complies with the DLA Master List of Technical and Quality Requirements and adheres to RP001 DLA Packaging Requirements for Procurement. The scope of work requires the delivery of one physical unit to a specified destination in Chambersburg, Pennsylvania. This opportunity falls under NAICS code 333993, with a response deadline set for November 9, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 11 days
NAICS: 333993
New
International
Downhole Deployment Valve (DDV) Supply and InstallationThis subcontract involves the supply and installation of specialized Downhole Deployment Valves for prime contractors operating on Oil & Gas Development Company Limited projects in Pakistan. The scope of work includes deploying and setting valves at precise depths to isolate the wellbore or manage fluid flow during tool deployment, as well as the subsequent actuation and retrieval of these valves according to the established drilling program. To ensure operational safety and quality, all provided equipment must strictly adhere to API standards for downhole hardware. The primary objective of the contract is the delivery of fully installed and functional Downhole Deployment Valves. Interested parties must submit their responses by November 12, 2026.
Oil & Gas Development Company Limited (OGDCL)

POSTED

3 days ago

DEADLINE

in 14 days
NAICS: 333993
New
DIBBS
Yellow Adhesive Supplier (NSN 8040-01-663-3917)This subcontract through the Defense Logistics Agency requires the supply of specialized yellow adhesive, identified by NSN 8040-01-663-3917, for prime contractors. The material must adhere to specifications for either Lockheed Martin P/N LMAML015F3/TU or 3M P/N 7000058946. Key requirements include a minimum extendable shelf life of 12 months and the provision of SDS and HCS labels in accordance with 29 CFR 1910.1200. The contract specifies the delivery of four 5.0-ounce units FOB Destination to Camp Lemonnier in Djibouti. All packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129 standards. This procurement falls under NAICS code 333993, with a response deadline set for November 2, 2026.
Defense Logistics Agency

POSTED

4 days ago

DEADLINE

in 4 days
NAICS: 333993
New
SLED
Purchase of Cardboard Baler
Solicitation # F2027043
Tarrant County is soliciting bids for the replacement of a cardboard baler at the Tarrant County Recycling Center under solicitation number F2027043. The project requires the awarded vendor to provide all labor and materials for the uninstallation and removal of the existing equipment and the installation of a new open-end automatic shear baler. Technical requirements for the new unit include an auto-tie system, a wire run-out sensor, a minimum total press weight of 25,350 pounds, a nominal hopper size of 30 by 30 inches, and a bale size of 30 inches wide by 40 inches deep with variable length. Safety features such as hinged access doors with safety interlocks for both the bale chamber and feed hopper are mandatory. Bidders must submit a vendor quote form, product specification sheets, warranty information, and oil and electrical system requirements. The contract will be awarded to the lowest bidder who meets all technical specifications and bids on all required items. All delivery costs, including labor, travel, fuel, freight, and the removal of current equipment, must be included in the installation pricing. Bidders must adhere to Tarrant County's General and Special Terms and Conditions, which include mandatory criminal background checks for personnel accessing county facilities and strict data security protocols for any IT-related solutions. The county also emphasizes its Historically Underutilized Businesses policy, targeting a 20 percent good faith goal for HUB participation. Invoices must be submitted to the Tarrant County Auditor's Office and reference a purchase order number, with payment typically issued within 30 days of receipt.
Tarrant County

POSTED

6 days ago

DEADLINE

in 26 days
NAICS: 333993
SLED
Biopharmaceutical Automated Fill Machine Isolator
Solicitation # 134-202627-001
Wilson Community College is soliciting proposals for the design, fabrication, and installation of an Automated Fill Machine Isolator unit for the Biomanufacturing Education and Skills Training (BEST) Center of Eastern North Carolina. The system will be integrated into simulated cleanrooms to provide a capstone training experience for students, focusing on manual aseptic processing and operator skill development rather than high-throughput production. The project encompasses multiple phases, including engineering and design, fabrication, Factory Acceptance Testing, onsite installation, commissioning, and final acceptance. While full GMP validation is not required, the equipment must meet OSHA standards and carry appropriate safety certifications from organizations such as ASME, UL, NEMA, or the American Gas Association. The contract is expected to be completed within one year of the effective date, with onsite installation anticipated after August 11, 2027. Payment is structured around milestone deliverables, with final payment contingent upon written acceptance by the BEST Center following successful inspection and training. Vendors must provide a comprehensive technical proposal, pricing, and certifications of financial condition, along with at least three customer references. The state also maintains an option for a maintenance agreement featuring two preventive safety inspections per year. Proposals are due by November 10, 2026, and will be evaluated based on a narrative consensus of strengths and weaknesses.
Wilson Community College

POSTED

9 days ago

DEADLINE

in 13 days
NAICS: 333993
SLED
5600 Combo L’ Sealer and Tunnel Combination Machine SupplierThis subcontract agreement involves the supply of one 5600 Combo Fully Automatic L Sealer and Tunnel Combination Machine intended for prime contractors working on State of Ohio Department of Administrative Services projects. The equipment package includes a machine with a 19 by 14 by 6 inch seal area, a precision temperature control tunnel, a 36F 3 ft Flighted Infeed Conveyor, and a Model 18-12SW Flexible Skate-wheel Conveyor. All provided machinery must exceed OSHA safety standards and be delivered as a fully functional unit accompanied by a spare parts kit. The procurement is managed by the Das105000 General Services Division Lzrs under NAICS code 333993. The solicitation was posted on October 16, 2026, with a response deadline set for November 2, 2026.
Das105000 General Services Division Lzrs

POSTED

13 days ago

DEADLINE

in 5 days
NAICS: 333993
SLED
5600 Combo, Fully Automatic L’ Sealer and Tunnel Combination Machine
Solicitation # SRC0000042083
The State of Ohio Department of Administrative Services is soliciting quotes for one 5600 Combo Fully Automatic L Sealer and Tunnel Combination Machine for use in Copy Center production. The equipment must feature a production speed of up to 30 packages per minute, a maximum seal area of 19 inches long by 14 inches wide by 6 inches high, and a variable speed drive from 0 to 95 FPM. Technical specifications include a chamber size of 18 inches wide by 7 inches high by 38 inches long and a precision temperature controller ranging from 0 to 400 degrees. The procurement also includes a 36F 3 ft flighted infeed conveyor, a Model 18-12SW 18 inch wide flexible skate-wheel conveyor, and a spare parts kit. Due to a 51 inch width entry restriction at the print shop, the machine must be delivered in separate pieces and assembled on-site. The awarded supplier must provide itemized pricing for installation and training. Safety is a critical requirement, as the machine must exceed OSHA safety standards with a fully enclosed seal area and safety interlocks on all doors, as well as built-in self-diagnostics on the control panel. Selection will be based on the lowest responsive and responsible quote. All bidders must be fully registered as suppliers with the State of Ohio through OhioBuys, OhioPays, and the Ohio Secretary of State.
Das105000 General Services Division Lzrs

POSTED

13 days ago

DEADLINE

in 5 days
NAICS: 333993
SLED
Sandbagging Machine
Solicitation # 967-0928-27
The County of Solano, through the Sheriff's Office - Office of Emergency Services, is soliciting bids under RFQ 967-0928-27 for the procurement and delivery of one fully assembled, operational sandbagging machine. This equipment is intended to enhance emergency preparedness and operational resilience during flood and storm events by enabling the rapid production of up to 1,200 sandbags per hour with a four-person crew. The machine must feature a heavy-duty welded steel frame with a minimum 10-gauge steel hopper, forklift pockets, and a digital control panel. Key technical requirements include adjustable fill weights from 1 to 5,000 pounds, compatibility with various bag materials and fill substances such as sand, gravel, and soil, and the integration of dual hopper agitators, an industrial sewing system, and a compatible generator for use in locations without utility power. The contract is governed by the laws of the State of California and requires delivery F.O.B. destination to Fairfield, California, with a target delivery date of November 15, 2026. Award will be granted to the lowest responsive and responsible bidder. Proposers must submit their bids electronically via the OpenGov portal by November 2, 2026, including a vendor application, a signed signature page, and proof of non-debarment via SAM.gov. The successful vendor must provide a minimum two-year or one-million-cycle manufacturer's warranty and maintain comprehensive general liability and workers' compensation insurance. Additionally, vendors must comply with Cal/OSHA requirements regarding hazardous materials and provide Material Safety Data Sheets if applicable.
Sheriff's Office - Office of Emergency Services

POSTED

14 days ago

DEADLINE

in 5 days
NAICS: 333993
SLED
Mail Folder/Inserter
Solicitation # 2027-RFQ-00168
The California Human Resources Department in Redwood City is soliciting quotes under solicitation number 2027-RFQ-00168 for the purchase, installation, setup, and ongoing maintenance of a high-volume folder/inserter machine. The equipment must be capable of folding, inserting, and sealing various standard mail pieces, including multi-page documents and return envelopes, to ensure secure and efficient government mail operations. Vendors are required to provide detailed equipment specifications, capacity, software licensing, and compatibility details with existing workflows. The selection process will prioritize the best overall value, weighing cost against reliability, operational efficiency, and service support. Interested parties must submit their responses by the deadline of November 10, 2026. Primary coordination for this project is handled by Financial Management Analyst Carling Luk and Mail Services Supervisor Victor Morales.
Human Resources Department

POSTED

14 days ago

DEADLINE

in 12 days
NAICS: 333993
SLED
Medical Device Logistics and DeliveryThis subcontract for Medical Device Logistics and Delivery involves the secure and timely transport of sterile medical implants for prime contractors supporting SUNY Upstate Medical University projects. The service requires the use of climate-controlled vehicles and sterile handling equipment to execute cold-chain or sterile-environment transport, ensuring just-in-time delivery to the surgical center in Syracuse, New York. To qualify for this engagement, the provider must maintain HIPAA compliance and hold all necessary DOT medical transport certifications. The contract falls under NAICS code 333993 and is managed through the State University of New York.
State University of New York (SUNY)

POSTED

about 1 month ago

DEADLINE

N/A

AI Contract Overview

Show more

This contract, identified by solicitation number RFQ1277531, was issued by the General Services Administration's FAS Region 7 Acquisition Center to procure hand operated strapping and sealing kits. The procurement aimed to establish a single-award Blanket Purchase Agreement against Multiple Award Schedule contracts, with a total not-to-exceed value of 5 million dollars. The agreement structure consists of a one-year base period followed by four optional extension years. Managed by the Southwest Supply and Acquisition Center in Fort Worth, Texas, the solicitation required vendors to provide detailed pricing, descriptive literature, and price lists. The selection process focused on evaluation criteria and past performance to ensure the quality of the supplied kits. The contract falls under NAICS code 333993 and was coordinated by Contract Specialist Hollis Mae Eskridge.

General Info

Agency

General Services Administration → Gsa/fas Region 7 Acqusition Center

Contract Value

$0

NAICS

333993 - Packaging Machinery Manufacturing

Place of Performance

TX, USA

Set-Aside

NONE

Awardee

INDEPENDENT METAL STRAP CO INC

Award Issued Date

Documents

1

RFQ 47QSWB-18-A-3540-BPA - Hand Operated Strapping and Sealing Kits

PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded
Posted

Award Notice

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGeneral Services Administration → Gsa/fas Region 7 Acqusition Center
Contacts1 person available
OfficeFORT WORTH, TX, 76102, USA
Organization / AgencyGeneral Services Administration → Gsa/fas Region 7 Acqusition Center
Office AddressFORT WORTH, TX, 76102, USA
Contacts
Hollis Mae EskridgeContract Specialist
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
After reviewing the award notice and RFQ, please take a minute to provide GSA with your thoughts on the benefits of increasing eBuy transparency, using the survey link below. https://feedback.gsa.gov/jfe/form/ SV_8BN7MMha0Agi8rr

More opportunities from General Services Administration → Gsa/fas Region 7 Acqusition Center

Same awarding agency

NAICS: 541330
Federal
Quality Assurance and Acceptance Testing CoordinationThis contract focuses on ensuring that HVAC units comply with merchantability and fitness-for-purpose standards, emphasizing quality assurance throughout the procurement process. The contractor is responsible for supporting government inspections as well as managing the resolution of any defects discovered after acceptance of the units. This helps guarantee that the delivered HVAC systems meet the required operational and quality benchmarks. The subcontract, titled "Quality Assurance and Acceptance Testing Coordination," is issued by the General Services Administration's GSA/FAS Region 7 Acquisition Center. The performance location is San Diego, specifically within the 92135 postal zone. The contract falls under NAICS code 541330, which pertains to engineering services. While specific points of contact and detailed organizational information are not provided, the contract requires a focus on coordinating acceptance testing and ensuring compliance with quality standards in support of federal procurement objectives.
Engineering Services

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 484220
Federal
Transportation and Final Mile Delivery (FOB Destination, CONUS)This contract involves the transportation and final mile delivery of air conditioning units to Naval Air Station North Island, California, under a FOB destination arrangement within the continental United States. The responsibility and risk of loss for the goods transfer to the buyer upon delivery at the specified destination. The procurement is managed by the General Services Administration's Region 7 Acquisition Center, aligning with the NAICS code 484220, which pertains to specialized freight trucking. The scope covers safe and timely delivery of the freight to the designated location in San Diego, CA, ensuring compliance with all relevant regulations and requirements. While specific solicitation details such as a number or set-aside information are not provided, the contract is positioned as a subcontract opportunity aimed at supporting government logistics needs within CONUS, emphasizing the critical role of reliable final mile delivery services for government installations.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 561499
Federal
Packaging, Marking, and Labeling Services (MIL-STD-129R Compliance)This contract involves providing packaging, marking, and labeling services for HVAC units in compliance with military standards, specifically MIL-STD-129R. The work includes preparing military-compliant packaging, applying the appropriate labeling and markings, and ensuring the inclusion of CAGE codes and UID tagging as required by the standard. The services are intended to meet stringent military specifications to ensure proper handling, identification, and traceability of the HVAC equipment. Issued as a subcontract under the NAICS code 561499, which covers specialized services related to packaging and labeling, the contract is managed by the General Services Administration (GSA) through the Region 7 Acquisition Center. The place of performance is designated to be in San Diego, California, with the postal code 92135. This contract emphasizes adherence to military logistics and identification protocols to support the secure and efficient transportation and tracking of HVAC units.
All Other Business Support Services

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 333415
Federal
Commercial Air Conditioning Unit Supply (Amana TPAC Units)The contract involves the supply of Amana-branded through-the-wall air conditioning units, specifically the TPAC models, to a military installation located in San Diego. The scope covers the complete procurement process, including testing, packaging, and providing all necessary documentation to ensure proper delivery and installation. This subcontract falls under NAICS code 333415, which pertains to air conditioning and warm air heating equipment manufacturing. Administered by the General Services Administration’s Region 7 Acquisition Center, the contract aims to fulfill the military’s operational requirements for reliable and efficient cooling solutions. The focus on thorough testing and correct packaging highlights the importance of quality assurance and readiness to meet the demands of the installation environment. The contract was posted in early May 2026, indicating a forthcoming or ongoing acquisition to maintain climate control infrastructure at the designated location.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 541611
Federal
Domestic Supply Chain Compliance & CertificationThis contract involves providing advisory and verification services to ensure that products and components comply with the Buy American Act, the Federal Acquisition Supply Chain Security Act (FASCSA), and federal restrictions related to supply chain vulnerabilities caused by foreign adversary-controlled elements. The focus is on certifying that supply chains are free from components subject to such restrictions, helping government agencies maintain compliance with federal regulations designed to protect national security interests and promote domestic sourcing. The contract is a subcontract categorized as a Total Small Business Set-Aside under FAR 19.5, specifically aligned with NAICS code 541611, which covers administrative management and general management consulting services. It is issued by the General Services Administration's Federal Acquisition Service, Region 7 Acquisition Center. The place of performance corresponds to a location with zip code 99301. This contract represents an opportunity for small businesses specializing in compliance consulting, risk assessment, and supply chain verification to assist federal clients in aligning with evolving regulatory frameworks addressing domestic sourcing and foreign adversary concerns.
Administrative Management and General Management Consulting Services

POSTED

9 months ago

DEADLINE

N/A
View Details
NAICS: 561910
Federal
Packaging, Marking, and Barcoding ServicesThis contract involves providing specialized packaging, labeling, and 2D PDF417 barcode application services for currency counting machines, ensuring compliance with MIL-STD-129R and ASTM D3951 standards. The services include applying the necessary data fields on the packaging to meet military and industry barcode specifications. It is a subcontract opportunity designated as a Total Small Business Set-Aside under FAR 19.5, targeting qualified small businesses. Administered by the General Services Administration’s Region 7 Acquisition Center, the contract falls under NAICS code 561910, which pertains to packaging and labeling services. The work is to be performed within the designated area corresponding to the ZIP code 99301. This contract opportunity aims to support federal procurement goals while ensuring standardized and traceable packaging for specialized machinery.
Packaging and Labeling Services

POSTED

9 months ago

DEADLINE

N/A
View Details
NAICS: 333318
Federal
Supply of Currency Counting Machines (NSN 7490015997186)This contract involves the supply and delivery of commercial off-the-shelf currency counting machines identified by NSN 7490015997186. The machines must comply with federal packaging, marking, and compliance standards, ensuring they meet government quality and regulatory requirements. The procurement is conducted as a subcontract under a Total Small Business Set-Aside, in accordance with FAR 19.5, encouraging participation from small businesses. The contract is managed by the General Services Administration's Region 7 Acquisition Center, operating under NAICS code 333318, which pertains to commercial and service industry machinery manufacturing. The place of performance is associated with the ZIP code 99301, and the contract was posted on February 10, 2026. This opportunity supports small business engagement while providing essential currency counting equipment to federal agencies.
Other Commercial and Service Industry Machinery Manufacturing

POSTED

9 months ago

DEADLINE

N/A
View Details
NAICS: 541611
Federal
Small Business Subcontracting Plan Development & ComplianceThis contract involves the development and implementation of a subcontracting plan that complies with the Federal Acquisition Regulation (FAR) requirements, specifically addressing small business participation goals as mandated by clause 52.219-9. The work is classified under the NAICS code 541611 and is set aside entirely for small businesses under the Total Small Business Set-Aside provision outlined in FAR 19.5. The contract is managed by the General Services Administration’s Region 7 Acquisition Center, with the place of performance located in Seal Beach, California, ZIP code 90740. The primary objective is to ensure adherence to all FAR compliance standards while promoting the inclusion of small businesses in subcontracting opportunities. This includes establishing measurable goals for small business participation and maintaining accountability throughout the contract lifecycle. The emphasis on small business involvement reflects the federal government’s commitment to supporting small enterprises through structured subcontracting plans aligned with regulatory requirements.
Administrative Management and General Management Consulting Services

POSTED

9 months ago

DEADLINE

N/A
View Details
NAICS: 484220
Federal
Transportation and Delivery to Seal Beach, CAThis contract involves the final delivery of 40 stainless steel container assemblies to Seal Beach, CA 90740. The scope includes not only the transportation of these heavy industrial cargo items but also the coordination of all logistics required to ensure their safe and timely arrival. The contract is a subcontract classified under NAICS code 484220, which pertains to specialized freight trucking, indicating that the transportation and handling of large or heavy industrial goods is a critical component of the work. The contract is a Total Small Business Set-Aside under FAR 19.5, reflecting an effort to support small businesses. It is managed by the General Services Administration’s Region 7 Acquisition Center, though specific contact details and the solicitation number are not provided. The place of performance is specifically the city of Seal Beach with the zip code 90740, confirming the delivery location. This arrangement demonstrates the government’s reliance on specialized subcontractors to handle complex logistics and transportation needs for critical industrial equipment.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

9 months ago

DEADLINE

N/A
View Details
NAICS: 811411
Federal
Labeling and Marking ServicesThis contract involves providing labeling and marking services in accordance with federal standards FED-STD-123H or MIL-STD-129R, which includes applying durable barcode labels for shipment tracking of container assemblies. The work is designated as a total small business set-aside under the SBA guidelines (FAR 19.5), ensuring opportunities for small businesses to compete. The contract falls under NAICS code 811411, related to commercial and industrial machinery and equipment (except automotive and electronic) repair and maintenance. The solicitation is managed by the General Services Administration's Region 7 Acquisition Center, with the place of performance specified as Seal Beach, California, ZIP code 90740. Although some organizational and point of contact details are not provided, the contract requires subcontracting for a service critical to logistics and inventory management, emphasizing compliance with military and federal standards for labeling and shipment tracking.
Home and Garden Equipment Repair and Maintenance

POSTED

9 months ago

DEADLINE

N/A
View Details
NAICS: 561910
Federal
Packaging and Protective CratingThe contract involves providing protective packaging for 40 stainless steel containers to ensure their safety during shipment, handling, and storage, meeting the standards set by ASTM D3951. It is designated as a subcontract under a total small business set-aside in accordance with FAR 19.5, targeting businesses within that category. The contract falls under the NAICS code 561910, which pertains to support services. This agreement is issued by the General Services Administration (GSA) through the GSA/FAS Region 7 Acquisition Center. The work is to be performed in Seal Beach, California, with the specified ZIP code 90740. The contract was posted on January 27, 2026, and focuses on packaging and protective crating services, emphasizing compliance with quality and industry standards to prevent any damage to the stainless steel containers throughout the logistics process.
Packaging and Labeling Services

POSTED

9 months ago

DEADLINE

N/A
View Details
NAICS: 332311
Federal
Stainless Steel Container ManufacturingThis contract involves the fabrication of 40 stainless steel container assemblies designed with double-door access, lockable wheels, and internal shelving, strictly adhering to the specifications outlined by the National Stock Number 8115-01-377-8817. The contract is a subcontract awarded under a Total Small Business Set-Aside in accordance with FAR 19.5, indicating that only qualified small businesses could compete for this opportunity. The associated NAICS code is 332311, which pertains to fabricated structural metal manufacturing. The contracting agency responsible is the General Services Administration (GSA) through its FAS Region 7 Acquisition Center. The place of performance is designated as Seal Beach, with the ZIP code 90740. Though specific office contact details are not provided, the contract posting date is January 27, 2026, and further contract details are available through the provided URL on the SAM.gov platform. This contract emphasizes high-quality stainless steel manufacturing compliant with government standards, tailored for logistical or storage purposes requiring mobility and secure access.
Prefabricated Metal Building and Component Manufacturing

POSTED

9 months ago

DEADLINE

N/A
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 333993
Awarded
Federal
Inserter Folding Machine
Solicitation # 030ADV18Q0455
Contracts Services

POSTED

about 8 years ago

CLOSED

about 8 years ago
View Details
NAICS: 333993
Awarded
Federal
Box Making Machine
Solicitation # FA8307-18-R-0204
FA8102 Aflcmc Hbk

POSTED

about 8 years ago

CLOSED

about 8 years ago
View Details
NAICS: 333993
Closed
Federal
Corrugated Box Maker
Solicitation # SP330018Q0124
DLA Distribution

POSTED

about 8 years ago

CLOSED

about 8 years ago
View Details
NAICS: 333993
Awarded
Federal
Cousins Low Profile Shrink Wrap Machines Brand Name or Equal
Solicitation # SP3300-18-Q-0110
DLA Distribution

POSTED

about 8 years ago

CLOSED

about 8 years ago
View Details
NAICS: 333993
Awarded
Federal
Shrink Wrap Machine
Solicitation # W912L1-18-Q-0259
W7N2 Uspfo Activity Tx Arng

POSTED

about 8 years ago

CLOSED

about 8 years ago
View Details
NAICS: 333993
Awarded
Federal
81 -- Stretch Wrap Machines and Packaging Supplies
Solicitation # N66001-18-Q-0386
Niwc Pacific

POSTED

about 8 years ago

CLOSED

about 8 years ago
View Details
NAICS: 333993
Awarded
Federal
48" HEAT SEALER
Solicitation # SPMYM218Q3715

POSTED

about 8 years ago

CLOSED

about 8 years ago
View Details
NAICS: 333993
Awarded
Federal
Cousines Low Profile Stretch Wrapper
Solicitation # SP3300-18-Q-0060
DLA Distribution

POSTED

over 8 years ago

CLOSED

over 8 years ago
View Details
NAICS: 333993
Awarded
Federal
Automatic Corrugated Box Making Machine
Solicitation # FA2823-18-Q-3017
FA2823 Aftc Pzio

POSTED

over 8 years ago

CLOSED

over 8 years ago
View Details
NAICS: 333993
Federal
66--ABQ - 501-18-4-257-0372 - HAPA Ink Rollers (VA-18-00059505)
Solicitation # 36C24E18Q0102
Rpo East (36C24E)

POSTED

over 8 years ago

DEADLINE

N/A
View Details
NAICS: 333993
Awarded
Federal
SEALING IRON,ELECTR
Solicitation # SPRDL118Q0181
DLA Land Warren

POSTED

over 8 years ago

CLOSED

over 8 years ago
View Details
NAICS: 333993
Awarded
Federal
Brand Name or Equal - Purchase and Installation of a Corrugated Box Maker at DLA Distribution Albany Georgia
Solicitation # SP3300-18-Q-0022
DLA Distribution

POSTED

over 8 years ago

CLOSED

over 8 years ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS