Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Hatch Hardware and Sensor Integration

Active

Federal

Response Deadline10/29/2026, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Hatch Hardware and Sensor Integration subcontract, issued by the Department of Homeland Security under agency CG-SEA-C22, involves the installation and adjustment of operational hardware, security components, and monitoring systems for ship repair projects at USCG Base Alameda. The scope of work includes the installation of locks, the integration and testing of hatch sensors, and the precision adjustment of locking mechanisms to ensure all security hardware is fully operational and integrated into new hatches. Contractors are required to utilize specialized electrical testing equipment specifically for marine sensors. This opportunity is designated as a Total Small Business Set Aside under NAICS code 238210. The project is located in Alameda, California, with a response deadline of October 29, 2026. The selected subcontractor will support prime contractors in delivering fully functional security and monitoring systems essential for vessel integrity and safety.

General Info

DHS subcontract for hatch hardware and sensor installation at USCG Base Alameda, California.

Agency

Department Of Homeland Security → CG-SEA-C22

NAICS

238210 - Electrical Contractors and Other Wiring Installation Contractors

Place of Performance

Alameda, CA, 94501, USA

Set-Aside

SBA

Documents

This scope was carved out of 70ZU0227Q0000200.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

USCGC STRATTON HATCH RENEW

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 23

subcontract

Response DeadlineOct 29

Submission deadline

Response Deadline

10/29/2026, 03:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Homeland Security → CG-SEA-C22

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Homeland Security → CG-SEA-C22

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installs and adjusts operational hardware, security components, and monitoring systems for prime contractors on USCG Base Alameda ship repair projects. Performs installation of locks, integration and testing of hatch sensors, and precision adjustment of locking mechanisms. Requires electrical testing equipment for marine sensors. Delivers fully operational locks, sensors, and security hardware integrated into the new hatch.

Similar Contracts

Same NAICS industry code

Jim Walters and Port O'Call South Lift Station Improvements - Runaway Bay, TX (Electrical, Fencing, Site Grading)

Solicitation # jim-walters-port-ocall-south-lift-station-improvements-runaway-bay-tx-electrical-fencing-site

Puris Services, LLC is soliciting quotes for the Jim Walters and Port O'Call South Lift Station Improvements project located in Runaway Bay, Texas. This opportunity is specifically set aside for small, minority, women-owned, and labor surplus certified firms. The required scopes of work include electrical services, fencing, and site grading and materials, falling under NAICS codes 238210, 238990, and 238910. Interested parties must submit their quotes by October 30, 2026, with the final bid due date set for November 3, 2026. Ashden Middlebrooks serves as the primary point of contact for all inquiries, plans, and specifications, and can be reached via email at ashden.middlebrooks@puriscorp.com or by phone at 470-503-5624.

Puris Services, LLC

POSTED

about 13 hours ago

DEADLINE

Transformer Oil Testing Services

Solicitation # RFP-VC-26-010

The Inland Empire Utilities Agency is soliciting proposals under RFP-VC-26-010 for professional transformer oil testing services to enhance the reliability, safety, and maintainability of its transformers. The scope of work is divided into three primary areas: conducting visual and infrared thermographic inspections to identify thermal anomalies, installing standardized external oil sampling devices to improve safety and access, and performing comprehensive oil testing analysis. Additionally, the selected contractor will evaluate nitrogen blanket systems to ensure positive pressure is maintained, provide on-site training for agency staff, and develop standard operating procedures. All work must adhere to strict industry standards, including ASNT Level 1 certification for thermography, NETA MTS, IEEE, NFPA 70E, and ASTM D923 and D924. The agency intends to make a single award to the most capable offeror based on their project experience with utilities or industrial facilities, proposed staffing and methodology, personnel availability, and cost-effectiveness. Proposals must be submitted electronically via PlanetBids by December 23, 2026, and must include a detailed company profile, project approach, and required certifications such as a Non-Collusion Statement and Workers Compensation Certificate. The contract will feature fixed pricing for an initial term with potential one-year extensions. Awardees must comply with California Labor Code prevailing wage requirements and provide evidence of cybersecurity commitments through SOC 2 or CAIQ documentation.

Inland Empire Utilities Agency

POSTED

about 13 hours ago

DEADLINE

in about 2 months

Purified Water Replenishment San Jacinto Valley Advanced Water Purification Facility

Solicitation # purified-water-replenishment-san-jacinto-valley-advanced-water-purification-facility-2

Axia Electric LLC is soliciting bids from SBE/DBE certified firms for the Purified Water Replenishment San Jacinto Valley Advanced Water Purification Facility Project for the Eastern Municipal Water District in California. The scope of work is divided between the San Jacinto Valley Advanced Water Purification Facility and Brine Ponds, specifically requesting subcontractors for low voltage systems, fiber optics, and electrical materials and supplies. Bids must be submitted by 2:00 PM on November 18th, with a final deadline of November 19th, 2026. Quotes should be sent to Ryan Falk, and any requests for plans or specifications should be directed to Amy Roller. Qualified bidders must be registered to perform public work pursuant to Section 1725.5 of the Labor Code and must meet strict insurance requirements, including 5 million dollars in excess liability and 1 million dollars each for auto liability, workers compensation, and per-occurrence general liability. Submission of a bid constitutes acceptance of Axia’s Standard Long Form Subcontract or Purchase Order, the AGC Master Labor Agreements, and all prime contract terms and conditions. While the solicitation targets SBE/DBE firms, non-certified bidders are encouraged to provide lower-tier SBE/DBE participation details for evaluation.

POSTED

about 13 hours ago

DEADLINE

2026-Nalo-Back-Up Generator Replacement

Solicitation # 2026-nalo-back-generator-replacement

Management and Training Corporation is seeking bids from qualified electrical contractors for a subcontracting opportunity to replace the back-up generator at the Hawaii Job Corps Center in Waimanalo. This project falls under NAICS code 238210 and is specifically designated for small businesses, including certified veteran-owned, service-disabled veteran-owned, women-owned, and HUBZone small businesses. Interested parties must submit their responses by November 3, 2026. The primary point of contact for this solicitation is Karllene Allen, who can be reached via email or phone for further coordination regarding the performance of work in Hawaii.

2026-Nalo-Back-Up Generator Replacement

POSTED

about 13 hours ago

DEADLINE

Centennial JCC Emergency Lighting Replacement, Upgrade, Testing & Maintenance Services

Solicitation # centennial-jcc-emergency-lighting-replacement-upgrade-testing-maintenance-services

Management and Training Corporation is soliciting bids for a fixed-price, single lump sum contract to provide emergency lighting replacement, upgrade, testing, and maintenance services at the Centennial Job Corps Center in Nampa, Idaho. The project involves inspecting, testing, repairing, and certifying emergency lighting systems to ensure compliance with NFPA 101 (2024 Edition), NFPA 70, and OSHA standards. Key tasks include inventorying all fixtures, performing functional power-cut testing, replacing failed ballasts with LED-compatible versions in specific areas such as the cafeteria, dorms, and education buildings, and applying durable tracking labels to all tested fixtures. The estimated contract value ranges between $25,000 and $100,000. Bids are due by December 1, 2026, and will be awarded based on overall best value. Mandatory requirements for submission include a physical site visit, a detailed cost breakout, and a bid bond guarantee of 20% for bids equal to or exceeding $25,000. Awarded contractors must provide performance and payment bonds from a surety with at least an A- rating. This opportunity is set aside for various small business categories, including VOSB, SDVOSB, WOSB, and HUBZone. Compliance with Federal Contractor Minimum Wage requirements, Davis-Bacon Act wage determinations for Idaho, and FAR regulations regarding small business utilization and whistleblower rights is required. Final acceptance is contingent upon a joint substantial completion inspection and the resolution of all punch list items.

Management & Training Corporation/Centennial Job Corps Center

POSTED

about 13 hours ago

DEADLINE

in about 1 month

ASO-1489-00 Installation of Distance Measuring Equipment (DME) on runway 15 at the Charleston International Airport in Charlston, SC

Solicitation # aso-1489-00-installation-distance-measuring-equipment-dme-runway-15-charleston-international-airport

This solicitation, identified as ASO-1489-00, involves the construction and installation of Distance Measuring Equipment (DME) to be collocated with the Runway 15 Localizer at Charleston International Airport in South Carolina. Managed by Parsons, the project falls under NAICS code 238210 and is specifically designated as a set-aside for various small business types, including Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone Small Businesses. Interested parties must submit their responses by the deadline of November 27, 2026. The primary point of contact for this opportunity is Quentin Wack. This procurement aims to enhance airport navigation infrastructure through the strategic installation of DME technology on the specified runway.

POSTED

about 13 hours ago

DEADLINE

in about 1 month

AMC-0235 TBD VOR Public Announcement

Solicitation # amc-0235-tbd-vor-public-announcement

This solicitation, issued by PTSI Managed Services Inc. (Parsons), involves a comprehensive construction project located in Louisiana. The scope of work encompasses a variety of facility improvements, including electrical work, grounding system repairs, roofing installation, plumbing replacements, grading, painting, and door repairs. The estimated magnitude of construction for these services is valued between 500,000 and 1,000,000 dollars. The opportunity is designated as an SBA set-aside, specifically open to Small Businesses, including Small Disadvantaged, Women-Owned, HUBZone, and Veteran-Owned Small Businesses. Interested parties must submit their responses by November 16, 2026. The project falls under NAICS code 238210, and primary inquiries should be directed to Kurtis Kinard.

PTSI Managed Services Inc. (Parsons)

POSTED

about 13 hours ago

DEADLINE

ASO-0728-00 DME Shelter Installation in Shelby, NC

Solicitation # aso-0728-00-dme-shelter-installation-shelby-nc

Parsons Corporation is soliciting bids for the installation of a DME shelter in Shelby, North Carolina. The scope of work includes the installation of a shelter furnished by others, along with a DME antenna, associated foundations, junction box, meter rack, underground conduit, grounding, and conductors. This project falls under NAICS code 238210. The solicitation is open to various small business classifications, including SBA certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone Small Businesses. Interested parties must submit their responses by the deadline of December 30, 2026. Primary coordination for this effort is managed by Quentin Wack.

Parsons Corporation

POSTED

about 13 hours ago

DEADLINE

Electrical Systems & Lighting MaintenanceThis subcontract for Electrical Systems and Lighting Maintenance involves providing essential maintenance and repair services for electrical plants and lighting systems on Transbay Joint Powers Authority facility projects. The scope of work includes maintaining electrical distribution, replacing lamps, cleaning light fixtures, and repairing electrical systems specifically for trash and recycling compactors to ensure all systems remain fully functional. Qualified bidders must provide a Licensed Electrician and adhere strictly to DIR Prevailing Wage compliance. The solicitation was posted on October 23, 2026, with a response deadline of December 4, 2026. This opportunity falls under NAICS code 238210 and is managed through the California Procurement agency.

POSTED

DEADLINE

in about 1 month

Kitchen Electrical SubcontractorThis subcontract for Muscogee County Schools involves providing specialized electrical installation services for school nutrition projects. The selected subcontractor will be responsible for installing electrical power supplies and connections for prime contractors, specifically delivering energized lines within four feet of equipment. The scope of work includes providing wiring for both 208-volt and 480-volt options. To qualify for this project, the contractor must be a Licensed Master Electrician and ensure all work complies with NEMA standards. The solicitation was posted on October 23, 2026, with a response deadline of November 17, 2026. This opportunity falls under NAICS code 238210 for electrical contracting.

Muscogee County Schools

POSTED

DEADLINE

Electrical Installation ContractorThis subcontract opportunity is for an Electrical Installation Contractor to support prime contractors on Connecticut Department of Energy and Environmental Protection projects. The scope of work involves the removal of existing equipment and the installation of new EV charging stations across four separate locations. Responsibilities include mounting the chargers to surfaces and connecting all necessary supporting utilities to ensure the stations are fully operational. To qualify for this project, the contractor must employ a Connecticut Licensed Master Electrician and ensure all work strictly adheres to the National Electrical Code. Interested parties should note that the response deadline is November 13, 2026, and the project falls under NAICS code 238210.

DAS Procurement

POSTED

DEADLINE

Electric Vehicle Charging Station Upgrades

Solicitation # DEEP102326CM

The Connecticut Department of Energy and Environmental Protection (DEEP) is soliciting bids under solicitation number DEEP102326CM for a consultant to provide review and installation support for upgrading electric vehicle charging stations at four statewide locations. The primary objective is to replace existing units with similar stations that integrate Amp Up wireless software to enable electronic payment processing for electricity used during transactions. The scope of work includes conducting site assessments to document existing equipment and utilities, developing schematic plans for supporting utilities, providing cost and construction timelines, and coordinating system start-up and owner training to ensure full functionality of the public payment capabilities. Bids must be submitted electronically to William Coleman by 2:00pm on November 13, 2026, and must remain valid for 90 days following the closing date. Evaluation by a DEEP representative panel will be based on the contractor's project approach, relevant experience and references, and a detailed breakdown of time and cost. Selected candidates may be required to participate in interviews or presentations. Upon selection, the contractor will negotiate a Purchase Order and Project Agreement to finalize financial terms and responsibilities.

DAS Procurement

POSTED

DEADLINE

More opportunities from Department Of Homeland Security → CG-SEA-C22

Same awarding agency

Technical Representative ServicesThis subcontract for Technical Representative Services supports the Department of Homeland Security under agency CG-SEA-C22. The selected provider will perform specialized technical services and oversight for prime contractors conducting reduction gear overhauls for the US Coast Guard Surface Forces Logistics Center. Primary responsibilities include providing technical guidance, performing inspections, and verifying the overhaul process through the use of specialized diagnostic and measurement equipment in strict compliance with Attachment 2 Specifications. The contractor is required to deliver comprehensive technical service reports and formal verification upon the completion of each overhaul. This opportunity falls under NAICS code 541330 and was posted on October 23, 2026, with a response deadline of November 5, 2026.

Engineering Services

POSTED

DEADLINE

Turning Gear SupplyThis subcontract involves the manufacture and supply of new turning gear assemblies for prime contractors supporting US Coast Guard Surface Forces Logistics Center projects on 225 foot WLB buoy tenders. The selected provider must ensure all units are equipped with specific bar code labels adhering to ISO/IEC-16388-2007 standards and are shipped in wood crates meeting MIL-C-104C specifications. Final delivery of the units is required at the SFLC facility in Baltimore, Maryland. To be eligible for this contract, the supplier must hold ANSI/ASQ Q9001-2008 certification. The opportunity is managed under the Department of Homeland Security, specifically agency CG-SEA-C22, and falls under NAICS code 333613. Interested parties should note the response deadline of November 5, 2026.

Mechanical Power Transmission Equipment Manufacturing

POSTED

DEADLINE

OEM Reduction Gear Overhaul KitsThis subcontract involves the supply of genuine OEM overhaul kits for Midlife Red Gear Overhaul projects supporting US Coast Guard Surface Forces Logistics Center 225 foot WLB buoy tenders. The contractor is responsible for providing all necessary parts and components in accordance with MIL-STD-2073-1E and ASTM D3951-15 standards, with final delivery of the WLB-225-RG-OVHL-Kits to SFLC in Baltimore, Maryland. To be eligible, the provider must maintain specific quality and technical certifications, including ISO/IEC 17025, ANSI/ASQ Q9001-2008, and ISO/IEC-16388-2007. This opportunity is managed under the Department of Homeland Security for agency CG-SEA-C22 and falls under NAICS code 333613.

Mechanical Power Transmission Equipment Manufacturing

POSTED

DEADLINE

Marine Coating and Insulation RestorationThis small business set-aside subcontract, managed by the Department of Homeland Security under agency CG-SEA-C22, focuses on marine coating and insulation restoration for ship repair projects at USCG Base Alameda. The scope of work involves restoring protective coatings, insulation sheathing, and identification labels, specifically requiring the application of marine-grade anti-corrosive coatings to welded areas and surrounding decks. All work must strictly adhere to USCG coating specifications for saltwater environments to ensure all restored elements meet rigorous shipboard standards. The project falls under NAICS code 238320 and is located in Alameda, California. Interested parties should note the posting date of October 23, 2026, with a response deadline set for October 29, 2026. The primary objective is to provide prime contractors with specialized restoration services that ensure the long-term durability and identification of vessel components.

Painting and Wall Covering Contractors

POSTED

DEADLINE

Marine Hatch Removal and Installation (Welding)This small business set-aside subcontract, issued by the Department of Homeland Security under agency CG-SEA-C22, involves the removal of an existing Raised Watertight Hatch and the installation of a government-furnished 60 by 60 inch replacement hatch and coaming. The work will be performed at USCG Base Alameda and requires the contractor to prepare deck openings, weld replacement units, and conduct watertight testing to ensure a fully functional installation. All work must be completed using marine-grade welding equipment in strict adherence to USCG and Navy marine welding standards. Interested parties must respond by October 29, 2026, for this project categorized under NAICS code 336611.

Ship Building and Repairing

POSTED

DEADLINE

OEM Compressor Lobe Supplier (Nash Model AD-203)This small business set-aside subcontract involves the procurement of three new and unused OEM compressor lobes, part number 14-3098-UN, specifically for Nash Model AD-203 Air Compressors. These components are intended for use by prime contractors on US Coast Guard vessel projects, specifically for the USCGC HEALY. The supplier is responsible for ensuring all parts meet OEM certification requirements to verify they are new and unused. The contract is managed by the Department of Homeland Security under agency CG-SEA-C22. The final deliverables must be shipped to the SFLC PE Staff located in Seattle, Washington. The solicitation was posted on October 23, 2026, with a response deadline of October 30, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

IBCTSUP-RED GEAR OVERHAUL PARTS AND TECH SERVICES

Solicitation # 70ZU0227RIBCT0001

The Department of Homeland Security, through the CG-SEA-C22 agency, intends to award a sole source, firm-fixed-price indefinite quantity contract to Timken Gears & Services Inc (dba Philadelphia Gear). The primary objective is the overhaul of reduction gears installed on 225 foot WLB buoy tenders within the Icebreaker, Buoy, and Construction Tender Product Line. This effort includes the provision of genuine Original Equipment Manufacturer parts, overhaul kits, and technical services. The contract is structured with a base period running from December 7, 2026, to December 6, 2027, followed by four optional one-year extension periods ending December 6, 2031. Technical requirements mandate that all repairs be performed to OEM specifications, with strict adherence to preservation, packaging, and marking standards such as SFLC-D-084-0481 and MIL-STD-2073-1E. Preservation treatments must protect components against corrosion and seal hardening for at least two years. Quality assurance is critical, requiring the contractor to maintain an inspection system compliant with ANSI/ASQ Q9003 and a calibration program traceable to the National Institute of Standards. Final acceptance of overhauled items is subject to validation by an onsite Government Quality Assurance Representative. The award process is based on the determination of technical capability and fair and reasonable pricing, evaluated against Independent Government Cost Estimates and past performance records. Administrative requirements include electronic invoicing via the Invoice Processing Platform and the use of specific routing codes. The solicitation is not set aside for small businesses and requires a comprehensive proposal submission, including a technical capability statement and a detailed pricing sheet, to be submitted by the November 5, 2026, deadline.

Mechanical Power Transmission Equipment Manufacturing

POSTED

DEADLINE

USCGC STRATTON HATCH RENEW

Solicitation # 70ZU0227Q0000200

Solicitation 70ZU0227Q0000200 is a total small business set-aside for the removal and replacement of Raised Watertight Hatch (RWTH) 01-21-1 on the USCGC STRATTON (WMSL-752). The contractor is responsible for providing all labor, supervision, tools, equipment, and materials necessary to perform the work, while the government will furnish the replacement 60 by 60 inch hatch and associated coaming. The scope of work includes preparing the deck opening, welding the replacement hatch, adjusting all related hardware such as locks and sensors, and restoring affected coatings, insulation, and labels. The project will be performed at the ship's homeport, the United States Coast Guard Base Alameda in California, with a period of performance from November 30, 2026, to December 11, 2026. The contractor must adhere to all safety, hot-work, ammunition, and environmental requirements, ensuring the final installation is structurally sound, watertight, and fully operational through rigorous weld examination and operational testing. No special security clearances are required for this effort.

Ship Building and Repairing

POSTED

DEADLINE

USCGC Healy Compressor lobes

Solicitation # 70ZU0227Q0000076

Solicitation 70ZU0227Q0000076 is a total small business set-aside issued by the Department of Homeland Security, specifically the CG-SEA-C22 agency, for the procurement of three new and unused OEM compressor lobes, part number 14-3098-UN. These components are required for the Nash Model AD-203 air compressors aboard the USCGC HEALY (WAGB 20) to ensure the vessel remains fully operational for its assigned missions. The contract falls under NAICS code 336611. The contractor is required to deliver the parts to the SFLC PE Staff in Seattle, Washington, with a final delivery deadline of April 1, 2027. Technical compliance is strictly limited to original equipment manufacturer parts that are new and unused. Administrative inquiries should be directed to Derek Raymond, while logistics and delivery are coordinated through LCDR Josh Martin. The solicitation was posted on October 23, 2026, with a response deadline of October 30, 2026.

Ship Building and Repairing

POSTED

DEADLINE

USCGC ALDER DD FY27

Solicitation # 70Z08526QIBCT0051

Solicitation 70Z08526QIBCT0051 is a total small business set-aside for the USCGC ALDER FY27 Drydock Availability. This requirement is for an Indefinite Delivery Requirements Contract (IDR) under FAR Part 12, with work to be performed at the contractor's facility. The industrial performance period is anticipated to run from January 2027 through April or May 2027, with an anticipated award date of December 28, 2026. The scope of work includes 110 work items such as hull plating, propulsion shafting, tank cleaning, rudder overhaul, and various mechanical and preservation services. Offerors must submit their quotes via email in three separate parts: Price, Technical Capability, and Past Performance Information. Technical submissions must include a comprehensive Execution Plan, a graphical planning document such as a Gantt chart, and a written narrative not exceeding ten pages. Evaluation is based on the lowest evaluated price among responsible quoters who receive an acceptable rating for technical capability and past performance. Required certifications include proof of E-verify enrollment, insurance coverage, and specific welding qualifications per SFLC Standard Specification 0740. Access to certain restricted drawings requires Joint Certification Program certification.

Ship Building and Repairing

POSTED

DEADLINE

DRYDOCK REPAIRS FOR THE CGC PATOKA

Solicitation # DDFY27PATOKA

The U.S. Coast Guard is seeking sources for drydock repairs for the USCGC PATOKA (WLR-75408), a 75-foot river buoy tender. The anticipated period of performance is from April 13, 2027, to June 22, 2027, with work to be conducted at the contractor's facility. The extensive scope of work includes hull plating inspection and preservation, propulsion shafting and propeller repairs, tank cleaning and preservation, rudder assembly overhaul, and various maintenance tasks for both the tender and its associated barge. Interested companies must respond by November 6, 2026, at 11:00 am EST. Submissions should be sent to Ms. Jayne Gluck and Ms. Sandra Martinez and must include the company name, unique entity ID, point of contact information, and business size status relative to NAICS code 336611. Applicants must provide a positive statement of intent to bid as a prime contractor and include all necessary documentation to verify any claimed small business certifications.

Ship Building and Repairing

POSTED

DEADLINE

Keel Cooler MaintenanceThis small business set-aside subcontract, managed by the Department of Homeland Security for the US Coast Guard SFLC, involves the specialized maintenance of grid and keel coolers for prime contractors. The scope of work requires the cleaning, inspection, and hydrostatic pressure testing of these systems using professional pumps and gauges to certify leak-free operation in accordance with established hydro-testing standards. The opportunity is categorized under NAICS code 238220 and was posted on October 21, 2026, with a response deadline of November 16, 2026. The primary objective is the delivery of fully cleaned and certified keel coolers to ensure the operational integrity of vessel projects.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS