Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Marine Coating and Insulation Restoration

Active

Federal

Response Deadline10/29/2026, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This small business set-aside subcontract, managed by the Department of Homeland Security under agency CG-SEA-C22, focuses on marine coating and insulation restoration for ship repair projects at USCG Base Alameda. The scope of work involves restoring protective coatings, insulation sheathing, and identification labels, specifically requiring the application of marine-grade anti-corrosive coatings to welded areas and surrounding decks. All work must strictly adhere to USCG coating specifications for saltwater environments to ensure all restored elements meet rigorous shipboard standards. The project falls under NAICS code 238320 and is located in Alameda, California. Interested parties should note the posting date of October 23, 2026, with a response deadline set for October 29, 2026. The primary objective is to provide prime contractors with specialized restoration services that ensure the long-term durability and identification of vessel components.

General Info

DHS subcontract for marine coating and insulation restoration at USCG Base Alameda.

Agency

Department Of Homeland Security → CG-SEA-C22

NAICS

238320 - Painting and Wall Covering Contractors

Place of Performance

Alameda, CA, 94501, USA

Set-Aside

SBA

Documents

This scope was carved out of 70ZU0227Q0000200.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

USCGC STRATTON HATCH RENEW

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 23

subcontract

Response DeadlineOct 29

Submission deadline

Response Deadline

10/29/2026, 03:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Homeland Security → CG-SEA-C22

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Homeland Security → CG-SEA-C22

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Restores protective coatings, insulation sheathing, and identification labels for prime contractors on USCG Base Alameda ship repair projects. Applies marine-grade anti-corrosive coatings to welded areas and surrounding decks, installs thermal insulation sheathing, and applies nameplates. Must adhere to USCG coating specifications for saltwater environments. Delivers restored coatings and insulation meeting shipboard standards.

Similar Contracts

Same NAICS industry code

Interior Painting SubcontractorThis interior painting subcontract involves providing specialized repainting services for prime contractors on City of Fort Worth airport projects. The scope of work focuses on the preparation of gypsum board walls within the lobby area and the application of low-VOC paint systems. All work must adhere to ASTM D523 standards to ensure the delivery of specified gloss levels, including Matte, High-side sheen, or Eggshell finishes. The opportunity is categorized under NAICS code 238320 and was posted on October 23, 2026. Interested parties must submit their responses by the deadline of December 10, 2026. This project is managed through the City of Fort Worth's procurement system for the purpose of delivering fully repainted lobby walls.

City Of Fort Worth

POSTED

DEADLINE

in about 2 months

High Performance Coatings & PaintingThis subcontract opportunity involves the application of high-performance coatings and finishes for prime contractors working on City of Duluth booster station projects in Minnesota. The scope of work includes the painting of pavement and the application of industrial high-performance coatings to various structures to deliver fully coated and painted surfaces. The project is categorized under NAICS code 238320. Interested parties must submit their responses by the deadline of November 24, 2026, following the posting date of October 23, 2026. Further details regarding the solicitation can be accessed through the provided BidExpress link.

POSTED

DEADLINE

in about 1 month

Residential Exterior PaintingThis subcontract opportunity is for the provision of exterior painting and coating services for residential projects under the City of Hialeah SHIP Program. The selected contractor will work under prime contractors to perform comprehensive surface preparation and apply exterior-grade paint to all elevations of residences following stucco remediation. The ultimate goal of the contract is the delivery of a fully painted exterior residence. Managed by the Community Development, Housing and Community Services Division in Florida, the project falls under NAICS code 238320. Interested parties must possess an active Corporation and Business Tax Receipt to be eligible. The solicitation was posted on October 23, 2026, with a response deadline set for November 18, 2026.

Community Development, Housing & Community Services Division

POSTED

DEADLINE

SHIP Program Julio Bueno - Exterior Paint

Solicitation # 2026-27-010

Solicitation 2026-27-010 is an Invitation for Quotes issued by the City of Hialeah, Florida, under the Community Development, Housing and Community Services Division. The project is part of the SHIP Program and focuses on comprehensive exterior renovations for the residence of Julio Bueno to ensure the home is safe, code-compliant, and sustainable. The scope of work is divided into two primary phases: stucco repair and smooth-finish conversion, which includes removing deteriorated stucco and resurfacing all elevations, followed by complete exterior painting using Sherwin-Williams premium products. All work must adhere to the Florida Building Code, ASTM C926 and C1063 standards, and PDCA industry specifications. The contract is awarded based primarily on price, with the City reserving the right to use split-order, lump sum, or individual-item award methods. Qualified respondents must provide proof of similar experience within the last two years, two distinct references, and comprehensive insurance documentation. The project must be completed within 90 days of the Notice to Proceed, with work typically performed during standard business hours. Final payment is contingent upon final acceptance by the City Project Manager and the homeowner, as well as the submission of as-built drawings, manufacturer warranty certificates, and operations and maintenance manuals. Responses must be submitted electronically via the City's e-procurement portal by November 18, 2026.

Community Development, Housing & Community Services Division

POSTED

DEADLINE

Flooring, Walls & PaintingThis subcontract focuses on providing comprehensive interior finishing services for prime contractors working on facility projects at Portland State University. The scope of work includes the installation of flooring under Division 09 60 00, the implementation of acoustic treatments and partitions under Division 09 70 00, and the application of various paints and coatings under Division 09 90 00 to ensure high-quality finished interior surfaces. The opportunity is categorized under NAICS code 238320 and was posted on October 23, 2026. Interested parties must submit their responses by the deadline of November 20, 2026, at 2:00 PM. While the project is associated with Portland State University, the administrative agency listed is Hagerstown Community College in Maryland.

Hagerstown Community College

POSTED

DEADLINE

Drywall, Painting & Interior FinishesThis subcontract for the Texas Military Department involves providing comprehensive interior finishing services for facility projects located at Camp Mabry. The scope of work includes the installation of R-30 batt insulation, 5/8 inch gypsum board, shiplap, and trim. The contractor is responsible for floating, taping, and sanding drywall to achieve a level finish, followed by painting interior walls and ceilings white and applying brown paint to trim and baseboards. Additionally, the contractor must paint all entrance and exit doors, ensuring all paint finishes are uniform and run-free and that all drywall is seamless. The project falls under NAICS code 238320 and is managed through the Texas Military Department. Interested parties should note that the response deadline for this opportunity is November 18, 2026.

Texas Military Department

POSTED

DEADLINE

Interior Painting and PatchworkThis subcontract for Interior Painting and Patchwork involves providing interior wall preparation and painting services for prime contractors on Housing Authority of the City of Milwaukee public housing projects. The scope of work includes performing patchwork, filling holes, sanding, and applying paint to interior walls and ceilings using brushes, rollers, and scrapers to ensure a fully finished result. The project falls under NAICS code 238320 and mandates strict adherence to Davis-Bacon wage compliance and Section 3 HUD reporting requirements. Interested parties must submit their responses by the deadline of November 6, 2026.

Housing Authority City of Milwaukee

POSTED

DEADLINE

Wall Preparation and PaintingThis subcontract for wall preparation and painting involves performing specialized finishing work for prime contractors on Alpine School District facility projects, specifically focusing on a remodel at Lehi Junior High. The scope of work includes the removal of existing wall carpet and wood trim, the preparation of newly exposed brickwork and walls, and the application of paint to all affected surfaces to deliver a completed finish. The project is categorized under NAICS code 238320 and is managed through the state of Utah. Interested parties must note the response deadline of November 3, 2026, following the posting date of October 23, 2026.

POSTED

DEADLINE

Interior Finishes (Painting & Flooring)This subcontract opportunity, managed by Bristol Alliance of Companies through their North Carolina office, involves providing interior finish services for prime contractors on NAVFAC and US Navy facility projects. The scope of work is centered at MCB Camp Lejeune, North Carolina, and specifically requires the installation of flooring, ceiling systems, and various painting and coatings to deliver completed interior surfaces. The project falls under NAICS code 238320 and was posted on October 23, 2026. Interested parties must submit their responses by the deadline of November 23, 2026, at 1:00 PM.

Bristol Alliance of Companies

POSTED

DEADLINE

Finishes & Flooring SubcontractorThis subcontract opportunity is for a Finishes and Flooring Subcontractor to provide installation of flooring, wall tiles, and paint for CalOptima facility projects located in Orange, California. The selected contractor will be responsible for delivering finished interior surfaces according to architectural plans, which includes repairing, patching, and touching up surfaces to ensure they match adjacent finishes. To be eligible, contractors must possess a valid California Contractor License, such as a C-33, and maintain DIR Registration. All work associated with this project must be performed after standard business hours. Interested parties must submit their responses by the deadline of November 13, 2026. The project falls under NAICS code 238320 and focuses on the delivery of high-quality interior finishes for the agency's facilities.

POSTED

DEADLINE

Professional Painting & CoatingsThis subcontract for Professional Painting and Coatings involves providing specialized painting services for the UCLA Gonda Center Deep Energy projects in Los Angeles. The selected contractor will be responsible for surface preparation and the application of primers, finish coatings, emulsions, enamels, and varnishes on walls, ceilings, and metal surfaces. All work must strictly adhere to project color schedules and utilize low-VOC paints to meet specific environmental limits. The opportunity was posted on October 23, 2026, with a response deadline of November 10, 2026. Falling under NAICS code 238320, the contract requires the delivery of high-quality finished painted surfaces while working under the direction of prime contractors for the University of California, Los Angeles.

University of California, Los Angeles

POSTED

DEADLINE

PSO RFP RF-20130-SZ Providing services for Dispensing unit Painting and Graphics at NVROs South Zone

Solicitation # Doc342133128

Pakistan State Oil Company Limited has issued solicitation RF-20130-SZ for the provision of painting and graphics services for dispensing units at NVROs South Zone in Pakistan. The procurement process is being managed electronically through the SAP Ariba Portal, with a submission deadline of November 4, 2026, at 2:15 PM. Interested bidders must be registered on the Ariba Network and are required to upload a scanned, signed, and stamped request on their official company letterhead to participate. Award decisions will be based on the evaluation of technical qualifications, specifically focusing on the bidder's financial capabilities and relevant past experience. The procuring agency is headquartered at PSO House in Clifton, Karachi. While the specific contract value and performance period are not detailed in the solicitation, the primary objective is the execution of specialized painting and graphics work for dispensing units within the designated South Zone region.

Pakistan State Oil Company Ltd

POSTED

DEADLINE

More opportunities from Department Of Homeland Security → CG-SEA-C22

Same awarding agency

Technical Representative ServicesThis subcontract for Technical Representative Services supports the Department of Homeland Security under agency CG-SEA-C22. The selected provider will perform specialized technical services and oversight for prime contractors conducting reduction gear overhauls for the US Coast Guard Surface Forces Logistics Center. Primary responsibilities include providing technical guidance, performing inspections, and verifying the overhaul process through the use of specialized diagnostic and measurement equipment in strict compliance with Attachment 2 Specifications. The contractor is required to deliver comprehensive technical service reports and formal verification upon the completion of each overhaul. This opportunity falls under NAICS code 541330 and was posted on October 23, 2026, with a response deadline of November 5, 2026.

Engineering Services

POSTED

DEADLINE

Turning Gear SupplyThis subcontract involves the manufacture and supply of new turning gear assemblies for prime contractors supporting US Coast Guard Surface Forces Logistics Center projects on 225 foot WLB buoy tenders. The selected provider must ensure all units are equipped with specific bar code labels adhering to ISO/IEC-16388-2007 standards and are shipped in wood crates meeting MIL-C-104C specifications. Final delivery of the units is required at the SFLC facility in Baltimore, Maryland. To be eligible for this contract, the supplier must hold ANSI/ASQ Q9001-2008 certification. The opportunity is managed under the Department of Homeland Security, specifically agency CG-SEA-C22, and falls under NAICS code 333613. Interested parties should note the response deadline of November 5, 2026.

Mechanical Power Transmission Equipment Manufacturing

POSTED

DEADLINE

OEM Reduction Gear Overhaul KitsThis subcontract involves the supply of genuine OEM overhaul kits for Midlife Red Gear Overhaul projects supporting US Coast Guard Surface Forces Logistics Center 225 foot WLB buoy tenders. The contractor is responsible for providing all necessary parts and components in accordance with MIL-STD-2073-1E and ASTM D3951-15 standards, with final delivery of the WLB-225-RG-OVHL-Kits to SFLC in Baltimore, Maryland. To be eligible, the provider must maintain specific quality and technical certifications, including ISO/IEC 17025, ANSI/ASQ Q9001-2008, and ISO/IEC-16388-2007. This opportunity is managed under the Department of Homeland Security for agency CG-SEA-C22 and falls under NAICS code 333613.

Mechanical Power Transmission Equipment Manufacturing

POSTED

DEADLINE

Hatch Hardware and Sensor IntegrationThe Hatch Hardware and Sensor Integration subcontract, issued by the Department of Homeland Security under agency CG-SEA-C22, involves the installation and adjustment of operational hardware, security components, and monitoring systems for ship repair projects at USCG Base Alameda. The scope of work includes the installation of locks, the integration and testing of hatch sensors, and the precision adjustment of locking mechanisms to ensure all security hardware is fully operational and integrated into new hatches. Contractors are required to utilize specialized electrical testing equipment specifically for marine sensors. This opportunity is designated as a Total Small Business Set Aside under NAICS code 238210. The project is located in Alameda, California, with a response deadline of October 29, 2026. The selected subcontractor will support prime contractors in delivering fully functional security and monitoring systems essential for vessel integrity and safety.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Marine Hatch Removal and Installation (Welding)This small business set-aside subcontract, issued by the Department of Homeland Security under agency CG-SEA-C22, involves the removal of an existing Raised Watertight Hatch and the installation of a government-furnished 60 by 60 inch replacement hatch and coaming. The work will be performed at USCG Base Alameda and requires the contractor to prepare deck openings, weld replacement units, and conduct watertight testing to ensure a fully functional installation. All work must be completed using marine-grade welding equipment in strict adherence to USCG and Navy marine welding standards. Interested parties must respond by October 29, 2026, for this project categorized under NAICS code 336611.

Ship Building and Repairing

POSTED

DEADLINE

OEM Compressor Lobe Supplier (Nash Model AD-203)This small business set-aside subcontract involves the procurement of three new and unused OEM compressor lobes, part number 14-3098-UN, specifically for Nash Model AD-203 Air Compressors. These components are intended for use by prime contractors on US Coast Guard vessel projects, specifically for the USCGC HEALY. The supplier is responsible for ensuring all parts meet OEM certification requirements to verify they are new and unused. The contract is managed by the Department of Homeland Security under agency CG-SEA-C22. The final deliverables must be shipped to the SFLC PE Staff located in Seattle, Washington. The solicitation was posted on October 23, 2026, with a response deadline of October 30, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

IBCTSUP-RED GEAR OVERHAUL PARTS AND TECH SERVICES

Solicitation # 70ZU0227RIBCT0001

The Department of Homeland Security, through the CG-SEA-C22 agency, intends to award a sole source, firm-fixed-price indefinite quantity contract to Timken Gears & Services Inc (dba Philadelphia Gear). The primary objective is the overhaul of reduction gears installed on 225 foot WLB buoy tenders within the Icebreaker, Buoy, and Construction Tender Product Line. This effort includes the provision of genuine Original Equipment Manufacturer parts, overhaul kits, and technical services. The contract is structured with a base period running from December 7, 2026, to December 6, 2027, followed by four optional one-year extension periods ending December 6, 2031. Technical requirements mandate that all repairs be performed to OEM specifications, with strict adherence to preservation, packaging, and marking standards such as SFLC-D-084-0481 and MIL-STD-2073-1E. Preservation treatments must protect components against corrosion and seal hardening for at least two years. Quality assurance is critical, requiring the contractor to maintain an inspection system compliant with ANSI/ASQ Q9003 and a calibration program traceable to the National Institute of Standards. Final acceptance of overhauled items is subject to validation by an onsite Government Quality Assurance Representative. The award process is based on the determination of technical capability and fair and reasonable pricing, evaluated against Independent Government Cost Estimates and past performance records. Administrative requirements include electronic invoicing via the Invoice Processing Platform and the use of specific routing codes. The solicitation is not set aside for small businesses and requires a comprehensive proposal submission, including a technical capability statement and a detailed pricing sheet, to be submitted by the November 5, 2026, deadline.

Mechanical Power Transmission Equipment Manufacturing

POSTED

DEADLINE

USCGC STRATTON HATCH RENEW

Solicitation # 70ZU0227Q0000200

Solicitation 70ZU0227Q0000200 is a total small business set-aside for the removal and replacement of Raised Watertight Hatch (RWTH) 01-21-1 on the USCGC STRATTON (WMSL-752). The contractor is responsible for providing all labor, supervision, tools, equipment, and materials necessary to perform the work, while the government will furnish the replacement 60 by 60 inch hatch and associated coaming. The scope of work includes preparing the deck opening, welding the replacement hatch, adjusting all related hardware such as locks and sensors, and restoring affected coatings, insulation, and labels. The project will be performed at the ship's homeport, the United States Coast Guard Base Alameda in California, with a period of performance from November 30, 2026, to December 11, 2026. The contractor must adhere to all safety, hot-work, ammunition, and environmental requirements, ensuring the final installation is structurally sound, watertight, and fully operational through rigorous weld examination and operational testing. No special security clearances are required for this effort.

Ship Building and Repairing

POSTED

DEADLINE

USCGC Healy Compressor lobes

Solicitation # 70ZU0227Q0000076

Solicitation 70ZU0227Q0000076 is a total small business set-aside issued by the Department of Homeland Security, specifically the CG-SEA-C22 agency, for the procurement of three new and unused OEM compressor lobes, part number 14-3098-UN. These components are required for the Nash Model AD-203 air compressors aboard the USCGC HEALY (WAGB 20) to ensure the vessel remains fully operational for its assigned missions. The contract falls under NAICS code 336611. The contractor is required to deliver the parts to the SFLC PE Staff in Seattle, Washington, with a final delivery deadline of April 1, 2027. Technical compliance is strictly limited to original equipment manufacturer parts that are new and unused. Administrative inquiries should be directed to Derek Raymond, while logistics and delivery are coordinated through LCDR Josh Martin. The solicitation was posted on October 23, 2026, with a response deadline of October 30, 2026.

Ship Building and Repairing

POSTED

DEADLINE

USCGC ALDER DD FY27

Solicitation # 70Z08526QIBCT0051

Solicitation 70Z08526QIBCT0051 is a total small business set-aside for the USCGC ALDER FY27 Drydock Availability. This requirement is for an Indefinite Delivery Requirements Contract (IDR) under FAR Part 12, with work to be performed at the contractor's facility. The industrial performance period is anticipated to run from January 2027 through April or May 2027, with an anticipated award date of December 28, 2026. The scope of work includes 110 work items such as hull plating, propulsion shafting, tank cleaning, rudder overhaul, and various mechanical and preservation services. Offerors must submit their quotes via email in three separate parts: Price, Technical Capability, and Past Performance Information. Technical submissions must include a comprehensive Execution Plan, a graphical planning document such as a Gantt chart, and a written narrative not exceeding ten pages. Evaluation is based on the lowest evaluated price among responsible quoters who receive an acceptable rating for technical capability and past performance. Required certifications include proof of E-verify enrollment, insurance coverage, and specific welding qualifications per SFLC Standard Specification 0740. Access to certain restricted drawings requires Joint Certification Program certification.

Ship Building and Repairing

POSTED

DEADLINE

DRYDOCK REPAIRS FOR THE CGC PATOKA

Solicitation # DDFY27PATOKA

The U.S. Coast Guard is seeking sources for drydock repairs for the USCGC PATOKA (WLR-75408), a 75-foot river buoy tender. The anticipated period of performance is from April 13, 2027, to June 22, 2027, with work to be conducted at the contractor's facility. The extensive scope of work includes hull plating inspection and preservation, propulsion shafting and propeller repairs, tank cleaning and preservation, rudder assembly overhaul, and various maintenance tasks for both the tender and its associated barge. Interested companies must respond by November 6, 2026, at 11:00 am EST. Submissions should be sent to Ms. Jayne Gluck and Ms. Sandra Martinez and must include the company name, unique entity ID, point of contact information, and business size status relative to NAICS code 336611. Applicants must provide a positive statement of intent to bid as a prime contractor and include all necessary documentation to verify any claimed small business certifications.

Ship Building and Repairing

POSTED

DEADLINE

Keel Cooler MaintenanceThis small business set-aside subcontract, managed by the Department of Homeland Security for the US Coast Guard SFLC, involves the specialized maintenance of grid and keel coolers for prime contractors. The scope of work requires the cleaning, inspection, and hydrostatic pressure testing of these systems using professional pumps and gauges to certify leak-free operation in accordance with established hydro-testing standards. The opportunity is categorized under NAICS code 238220 and was posted on October 21, 2026, with a response deadline of November 16, 2026. The primary objective is the delivery of fully cleaned and certified keel coolers to ensure the operational integrity of vessel projects.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS