Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Hazardous Material Compliance and Labeling Services

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the development and submission of hazard warning labels and Safety Data Sheets (SDS) for non-exempt materials, ensuring full compliance with OSHA 29 CFR 1910.1200 and Federal Standard No. 313. This work is critical for maintaining regulatory adherence in the handling, transportation, and use of hazardous materials within the Department of Defense supply chain. The deliverables must meet all technical and formatting requirements prescribed by federal safety standards to accurately communicate chemical hazards and protective measures to personnel and emergency responders. This is a subcontract under the NAICS code 541690, issued by the Aviation Supply Chain division of the Department of Defense, with a performance location in New Cumberland, Pennsylvania, ZIP 17070-5002. The solicitation was posted on August 2, 2026, and proposals are due by August 10, 2026. The contract focuses on specialized technical services related to hazardous material compliance, requiring expertise in chemical classification, regulatory interpretation, and label design. All submitted materials must be accurate, complete, and aligned with current federal regulations to support safety and operational continuity across defense logistics operations.

General Info

Develop hazard labels and SDS for DoD materials per OSHA 29 CFR 1910.1200 and Federal Standard No. 313 in New Cumberland, PA.

Agency

Department Of Defense → AVIATION SUPPLY CHAINView Agency

NAICS

541690 - Other Scientific and Technical Consulting ServicesView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 2

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → AVIATION SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Development and submission of hazard warning labels and Safety Data Sheets (SDS) compliant with OSHA 29 CFR 1910.1200 and Federal Standard No. 313 for non-exempt materials.

Similar Contracts

Same NAICS industry code

Construction Safety Services IDIQThe Port of Seattle has initiated a proactive Construction Safety Services IDIQ to address the growing complexity and liability associated with construction activities on its property. With increasing legal obligations and heightened scrutiny from recent court rulings, the Port is formalizing a comprehensive safety program to ensure all construction projects are conducted without disrupting port operations and with the highest standards of worker and public safety. This initiative is designed to monitor, enforce, and continuously improve safety protocols across all construction sites under Port jurisdiction, reflecting a strategic shift toward risk mitigation and regulatory compliance. The contract is issued under NAICS code 541690 and is structured as an indefinite delivery/indefinite quantity agreement to provide flexible access to qualified safety service providers. The program will support a range of construction activities by integrating expert safety oversight, compliance auditing, and operational coordination directly into project workflows. Point of contact for inquiries is Sue Yi, with Bruce Gamble serving as the Project Manager, and further details can be found through the Port’s official solicitation portal. The forecasted posting date indicates the Port is preparing to solicit proposals in the near future to establish a pool of vetted safety service firms ready to respond to emergent and planned construction needs.

Construction Management

POSTED

about 3 hours ago

DEADLINE

Quality Assurance and Inspection ServicesThe contract requires independent inspection and testing services to guarantee zero non-conformances in defense components, adhering strictly to MIL-STD-1916 or ASQ H1331 sampling plans. The work involves rigorous quality assurance protocols to ensure every component meets exacting military standards before delivery, with no tolerance for defects or deviations. The scope is focused on supporting critical defense supply chains through precise, auditable inspection processes designed to eliminate failure risk at the source. This is a subcontract under the Department of Defense, specifically managed by the ASC SUPPLIER OPER OEM DIVISION, with a NAICS code of 541690 for other scientific and technical consulting services. The solicitation was posted on August 3, 2026, and responses must be submitted by September 3, 2026. While no specific location is provided for performance or contract administration, the work is expected to support defense components in a manner aligned with federal procurement requirements. Contractors must be prepared to demonstrate expertise in military quality standards and deliver verifiable results to maintain compliance throughout the contract period.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 7 hours ago

DEADLINE

in about 1 month

Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction

Solicitation # corydon-well-replacement-project-professional-design-bidding-support-engineering-services-during

The Elsinore Valley Municipal Water District is seeking professional design and engineering services to replace its aging Corydon groundwater well with a new production well on the same site, leveraging existing transmission infrastructure to ensure continuity and efficiency. The project aims to sustain and expand potable water supply to meet rising community demand and will be supported by both District funds and a grant from the U.S. Department of the Interior’s Bureau of Reclamation WaterSMART program. TKE Engineering, Inc. is soliciting proposals from certified Disadvantaged, Minority, and Woman Business Enterprises specializing in hydrology and hydraulic modeling, structural and electrical engineering—including SCADA system design—geotechnical investigations, and underground utility locating through potholing. The work will encompass full design services, bidding support, and on-site engineering oversight during construction to ensure compliance, safety, and system performance. Proposals must be submitted by September 1, 2026, and are specifically targeted toward firms holding DBE, MBE, or WBE certifications under state and national programs. The contract is issued under NAICS Code 541690 for hydrology and hydraulic services, though related disciplines including structural, electrical, and geotechnical engineering are integral to the project’s success. All work will occur within EVMWD property in California, and the primary point of contact for inquiries is Sak Chanthabouasy of TKE Engineering, Inc. The solicitation emphasizes the importance of partnering with diverse firms to fulfill project requirements while advancing equity in public infrastructure development.

TKE Engineering, Inc.

POSTED

about 8 hours ago

DEADLINE

D--EC - PONDEROSA - B3 ONLINE ACCESS

Solicitation # 140R6026Q0122

The U.S. Bureau of Reclamation’s Missouri Basin Region intends to award a sole-source, firm-fixed-price purchase order to Ponderosa Advisors LLC for five years of access to the B3/Water Sage online geospatial platform, which provides critical data on water rights, streaming gages, and land parcels. This platform has been in continuous use by the Bureau for over a decade, and Ponderosa Advisors LLC is the exclusive developer and owner of the proprietary B3 Water Rights & Land Platform: Colorado, making it the only source capable of meeting the agency’s technical requirements under FAR 12.102(a). The contract includes a base period with four option years, with an anticipated award date of September 1, 2026, and is classified under NAICS code 541690 for other scientific and technical consulting services, with a small business size standard of $19 million. This notice is not a competitive solicitation but a formal announcement of intent to award without competition, allowing other firms to submit technical capability statements and business profiles by August 18, 2026, for market research purposes only. Submissions must be sent to Monica Burgio, Contract Specialist, at monica_burgio@ios.doi.gov or by phone at (801) 524-3780. Although the official contracting office is listed as the Upper Colorado Regional Office in Salt Lake City, Utah, the procurement is managed by the Missouri Basin Region in Billings, Montana. No competitive quotes are being requested, and all information received will be used solely to inform future procurements of similar scope.

Upper Colorado Regional Office

POSTED

about 12 hours ago

DEADLINE

International Programs & Trade, Invasive Species Program Funding Opportunity

Solicitation # USDA-FS-IPT-INVASIVE-SPECIES-2026

The Forest Service under the U.S. Department of Agriculture is seeking proposals through the Invasive Species Program Funding Opportunity to advance the prevention of invasive species that threaten American agriculture. The initiative focuses on translating existing scientific research—such as horizon scanning and sentinel tree monitoring—into actionable policy and regulatory improvements that reduce the introduction and establishment of new invasive pests. Proposals must directly connect proven research findings to concrete outcomes, strengthening frameworks and interventions that stop invasive species before they arrive or take hold. Projects should demonstrate clear pathways from knowledge to practice, enhancing the nation’s capacity to prevent invasive species incursions through science-based decision-making. Applications are open under solicitation number USDA-FS-IPT-INVASIVE-SPECIES-2026, with a submission deadline of September 30, 2026. Funding is administered by the International Programs & Trade office, and all projects must align with the goal of protecting U.S. agricultural systems from invasive threats. The point of contact for inquiries is Chris Soriano, Regional Operations Manager, reachable via email or phone. There is no set-aside designation, and the opportunity is open to eligible applicants nationwide with no geographic restrictions on performance. All submitted work must prioritize practical, measurable improvements to pre-invasion prevention strategies grounded in current scientific evidence.

POSTED

about 20 hours ago

DEADLINE

in about 2 months

Hazardous Materials Compliance & Labeling ServicesThe contract seeks specialized services to ensure full regulatory compliance with hazard communication standards for hazardous materials, focusing on classification, GHS-compliant labeling, and the preparation of Safety Data Sheets in strict adherence to OSHA 29 CFR 1910.1200 and DFARS 252.223-7001. The work is required to support the Department of Defense’s Fluid Handling Division, with performance localized to Tracy, California, and must align with federal mandates governing the safe handling, labeling, and documentation of hazardous substances across military supply chains. The solicitation is issued as a subcontract under NAICS code 541690, reflecting its placement within other scientific and technical consulting services, with proposals due by August 13, 2026. The contract emphasizes precise execution of compliance tasks to meet both occupational safety and defense procurement requirements, ensuring all materials are properly categorized and documented for use in DoD operations. While no specific set-aside or point of contact is listed, the place of performance and regulatory framework indicate a high-stakes, detail-oriented engagement demanding expertise in U.S. and defense-specific regulatory environments.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Hazardous Materials Compliance & SDS ProvisionThe contractor is required to identify, document, and submit Safety Data Sheets for all hazardous components present in the springs being supplied, ensuring full alignment with current hazard communication standards. This includes maintaining accurate and up-to-date SDS documentation for every substance classified as hazardous, and promptly providing these sheets upon request or as part of routine compliance reporting. The work must be performed in accordance with federal regulations governing the handling and communication of chemical hazards, with emphasis on clarity, completeness, and timeliness of information delivered to the end user. Performance of this subcontract is tied to the Department of Defense’s Fluid Handling Division, with the place of performance located in Phoenix, Arizona, 85043. The solicitation, classified under NAICS code 541690, is open for responses until August 13, 2026, following a posting date of August 2, 2026. The contractor must ensure continuous compliance throughout the term of the agreement, supporting the procurement chain with reliable and verified safety documentation to safeguard personnel and meet regulatory obligations under defense contracting protocols.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Medical Device Packaging and Hazard LabelingThe contract requires strict adherence to OSHA’s Hazard Communication Standard for the proper labeling of medical device packaging and the preparation of accurate Safety Data Sheets. This subcontract pertains to ensuring all medical devices are labeled in compliance with federal safety regulations to communicate potential hazards effectively to users and handlers. The scope includes accurate chemical identification, hazard classification, signal words, pictograms, precautionary statements, and supplier information on labels, as well as the creation and maintenance of SDS documents that meet OSHA’s formatting and content requirements. The solicitation is issued under the NAICS code 541690 and is managed by the Department of Defense through the MEDICAL SUPPLY CHAIN MD SURG FSF. Performance is required at Charleston Air Force Base with a zip code of 29404-4704. The contract was posted on August 2, 2026, and responses are due by August 10, 2026. This is a subcontract opportunity with no set-aside designation, meaning any qualified vendor may submit a proposal. The work is critical to regulatory compliance and operational safety within military medical supply chains, requiring precision in documentation and labeling to prevent miscommunication of hazards and ensure legal and operational integrity.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract pertains to regulatory consulting services focused on hazard communication compliance, specifically requiring the preparation of warning labels and safety data sheets (SDS) that meet both OSHA and military standards. This work is critical to ensuring proper handling, storage, and disposal of hazardous materials across defense operations, with all deliverables needing to align with federal safety regulations and Department of Defense requirements. The services will support the Defense Logistics Agency in maintaining stringent compliance for hazardous materials used in military supply chains and facilities. The contract is classified as a subcontract under NAICS code 541690, which covers other scientific and technical consulting services, and is issued by the Department of Defense through the Defense Logistics Agency. Performance is required at a designated location in Albany, Georgia, with a zip code of 31704-0325. The solicitation was posted on August 2, 2026, and responses must be submitted by August 13, 2026. There is no set-aside designation specified, indicating the opportunity is open to all qualified subcontractors regardless of size or status. All work must be completed in accordance with applicable federal regulations, and contractors are expected to demonstrate expertise in hazard communication standards and military-specific documentation protocols.

Defense Logistics Agency

POSTED

DEADLINE

Hazardous Materials Compliance & SDS ManagementThe contract requires comprehensive identification, labeling, and documentation of all hazardous materials used in or associated with cutting tools, ensuring full compliance with regulatory standards. This includes the accurate generation and maintenance of Safety Data Sheets (SDS) that meet required specifications, covering material composition, handling procedures, health and environmental hazards, and emergency response measures. All labeling must align with international and domestic regulations to ensure safe handling, storage, and transportation throughout the supply chain. The subcontract is issued by the Defense Logistics Agency under the Department of Defense, with performance required in Springfield, Missouri, and a response deadline of August 13, 2026. It falls under NAICS code 541690, indicating its focus on other scientific and technical consulting services, specifically relating to regulatory compliance and safety documentation. The solicitation is open to qualified subcontractors capable of delivering precise, auditable SDS records and robust hazardous materials management protocols to support defense-related manufacturing operations.

Defense Logistics Agency

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract requires the provision of hazard warning labels and Safety Data Sheets for a shipment of baby shampoo, ensuring full compliance with federal and military hazardous materials regulations. Despite the product being a personal care item, it must be treated as a hazardous material under applicable transport and handling standards, necessitating accurate labeling and documentation to meet Department of Defense requirements. The work is classified as a subcontract under NAICS code 541690, which covers other scientific and technical consulting services, and performance is expected to be delivered to the Raleigh, North Carolina location with a zip code of 27607-0000. The solicitation was posted on August 2, 2026, with responses due by August 10, 2026, and is managed by the Medical Supply Chain MD Surg FSF under the Department of Defense.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract pertains to the provision of hazard communication support for medical kits containing hazardous components, with a focus on ensuring full compliance with the Globally Harmonized System of Classification and Labeling of Chemicals. This includes the accurate development and implementation of hazard labels, generation of Safety Data Sheets, and adherence to all applicable regulatory requirements related to the handling, storage, and transportation of hazardous materials within medical supply environments. The work must meet stringent standards to safeguard personnel and ensure regulatory alignment across domestic and international operations. The contract is classified as a subcontract under NAICS code 541690 and is issued by the Department of Defense through the Medical Supply Chain MD Surg FSF. It was posted on August 2, 2026, with a response deadline of August 10, 2026. The performance location is not specified, indicating potential nationwide or global applicability depending on the distribution of medical kits. All deliverables must be completed in strict accordance with federal safety and compliance mandates, and contractors are expected to demonstrate proven expertise in chemical regulation, documentation integrity, and medical supply chain logistics.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN

Same awarding agency

BOLT, CLOSE TOLERANCE

Solicitation # SPE4A1-26-T-2507

This contract specifies the procurement of a close-tolerance bolt identified by NSN 5306-01-508-6784 and part number NAS6604-128, with a requirement for 30 units to be delivered within 169 days under FOB origin terms and zero quantity variance. The item is classified as a commercial item and must comply with the current revision of the applicable non-government standard NAS6603 through NAS6620, Revision 11 dated December 31, 2025, as well as other referenced technical documents including MIL-STD-130N for identification marking and SYSTEM 22 of FED-STD-H28/20 for dimensional inspection of Class 3A and 3B threads, excluding small threads and self-locking nuts. All manufacturing and quality controls are governed by the DLA Master List of Technical and Quality Requirements, with specific provisions for tailored quality requirements, physical identification, and removal of government identification from non-accepted supplies. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs corresponding to critical, major, and minor classifications. Packaging must adhere to ASTM D3951 and MIL-STD-129 with palletization per DLA’s RP001, and all documentation including the Certificate of Quality Compliance must be provided as specified in the Technical Data Package. Delivery is required to the DLA Distribution facility in New Cumberland, Pennsylvania, with no tolerance for late delivery, and inspection and acceptance occur at the destination. The contract references multiple revisions of quality assurance provisions and CDRLs, with mandatory compliance to DLA requirements overriding all other standards unless explicitly superseded by contract amendments.

Nonferrous Forging

POSTED

about 7 hours ago

DEADLINE

GROMMET, NONMETALLIC

Solicitation # SPE4A1-26-T-2508

The contract is for the procurement of 4 nonmetallic grommets with NSN 5325-01-610-9083 and part number MR200-1271 from Modus Advanced Inc., under solicitation SPE4A1-26-T-2508. Delivery is required FOB origin with zero variance in quantity and must be completed within 166 days, with an original required delivery date of January 25, 2027. Inspection and acceptance both occur at the destination, specifically at the DLA Distribution San Joaquin warehouse in Tracy, California. Packaging must comply with MIL-STD-2073-1E, marking must adhere to MIL-STD-129, and palletization must meet DLA packaging requirements. The grommets are to be shipped without special marking and in bulk packaging. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise specified. Critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. Documentation for source approval and removal of government identification from non-accepted items is mandated. The unit of issue is each, priced at $4.00 per unit, totaling $16.00. All transportation and shipping details follow DLA procedures, and the contract references applicable quality assurance provisions and standardized procedures for compliance.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

RETAINER, SPRING

Solicitation # SPE4A1-26-T-2511

The contract pertains to the procurement of four retainer springs with NSN 1650-01-046-2272 under solicitation SPE4A1-26-T-2511, with a delivery requirement of 20 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. Sampling is to follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stipulated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. The manufacturer may choose attribute or variable inspection under MIL-STD-1916 unless directed otherwise. No data is currently available, and the alternate offeror must submit a complete data package including details for both the approved and alternate part. The solicitation is issued by the Department of Defense’s Aviation Supply Chain, with Allison Hugel as the primary point of contact, and responses are due by August 11, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

SHAFT ASSEMBLY, OUTP

Solicitation # SPE4A1-26-Q-0099

The contract specifies the procurement of 662 units of a Shaft Assembly, Output, identified by NSN 2925-01-179-2648 and manufacturer part number 3501614-3 from Honeywell International Inc. The item is classified as a Commercial Item and a Critical Safety Item (CSI) with a critical application, requiring strict adherence to specified dimensional tolerances on the output shaft’s forward end design and torsion rod diameter. Quality assurance is governed by SAE AS9100 for both manufacturers and non-manufacturers, with inspection and acceptance occurring at origin in accordance with MIL-STD-1916 or ASQ H1331, using zero-defect acceptance criteria unless otherwise stated. All items must be marked per MIL-STD-129 with lot and serial numbers, contractor and manufacturer CAGE codes, and part numbers, and packaged in compliance with MIL-STD-2073-1E and DLA packaging requirements. The contract mandates compliance with DLA’s master list of technical and quality requirements, Cybersecurity Maturity Model Certification Level 2 self-assessment, and documentation for source approval, while explicitly stating that Item Unique Identification is not required per DFARS 252.211-7003. The procurement is under a Firm Fixed Price contract with no variance allowed in quantity, and delivery is due 247 days after the date of award. The delivery point is Origin, and the shipping destination is DLA Distribution Cherry Point, North Carolina. The item has no shelf life requirement and is subject to all applicable defense information and cybersecurity controls. The solicitation number is SPE4A1-26-Q-0099, posted on August 3, 2026, with responses due by August 10, 2026, issued by the Department of Defense’s Aviation Supply Chain under a federal acquisition framework. All waivers or deviations must be approved by the DSC Contracting Officer, and measuring and test equipment must meet specified standards. The unit of issue is each (EA), with pricing details to be filled in at award.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

STUD, CONTINUOUS THR

Solicitation # SPE4A1-26-T-2509

The contract specifies the procurement of a stud with continuous thread, identified by NSN 5307-01-533-6085 and part numbers 95412A597 and STC5618X4, for delivery to a U.S. military installation in Camp Humphreys, South Korea. A single unit of issue (FV) is required with strict zero variance allowance, and delivery must be completed within ten days of award under FOB origin terms. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951, MIL-STD-129, and DLA’s stricter Packaging Requirements for Procurement (RP001), including palletization and labeling as specified. The unit of issue is standardized under DoD guidelines, and all items must be marked per DLA’s Physical Identification and Bare Item Marking requirements (RQ017) with government identification retained unless rejected. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. Configuration changes require formal engineering change proposals, and any deviations must be formally requested. The contract references the DLA Master List of Technical and Quality Requirements, which supersedes all other standards, and compliance with these requirements is mandatory. The solicitation number is SPE4A1-26-T-2509, with a response deadline of August 11, 2026, and delivery is required no later than July 28, 2026, under a government-funded project.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

STUD ASSEMBLY, TURNLOCK

Solicitation # SPE4A1-26-T-2510

The contract pertains to the procurement of 34 units of a STUD ASSEMBLY, TURNLOCK FASTENER with part number FX10-1540-4TS and NSN 5325-00-907-1085, supplied by ALCOA GLOBAL FASTENERS INC based in Simi Valley, CA. All items must comply with MIL-STD-130N for identification marking of U.S. military property as specified, and the procurement is governed by DLA Packaging Requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on acquisition size. The delivery is required within 118 days after award, and the place of performance is designated as Tracy, CA with a zip code of 95304-5000. The solicitation number is SPE4A1-26-T-2510, issued under NAICS code 332510, and was posted on August 3, 2026, with responses due by August 11, 2026. Primary point of contact is Jade Stringfield of the Department of Defense’s Aviation Supply Chain, reachable via email and phone listed in the contract data. Government identification must be removed from any non-accepted supplies in accordance with RQ011 requirements.

Hardware Manufacturing

POSTED

about 7 hours ago

DEADLINE

PRODUCTION LOT TESTING

Solicitation # SPE4A1-26-T-2506

The contract pertains to Production Lot Testing for four units identified by NSN 0001S00000062, under Purchase Request 7017695781, with a delivery requirement of 282 days after award. The solicitation number is SPE4A1-26-T-2506, issued by the Department of Defense's Aviation Supply Chain through the Defense Logistics Agency, with performance located at Cherry Point, North Carolina, 28533-5040. Contractors must prepare a Production Lot Test Report clearly labeled with the contract and lot/item numbers, and present it to the Quality Assurance Representative for review. All shipments of test reports must be accompanied by signed DD Form 1222 and DD Form 250 or iRAPT receiving documents, a copy of the contract or order, all actual test results and tolerances from the technical data package, material and process certifications, process operation and inspection method sheets, and the drawings used to manufacture the test sample, properly marked if public disclosure or government use beyond the specified purpose is to be restricted. The solicitation was posted on August 3, 2026, with responses due by August 11, 2026, and is classified under NAICS code 332722, with Jade Stringfield as the primary point of contact.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

Subcontract Opportunity Decomposition UnavailableA subcontract opportunity has been posted under the Aviation Supply Chain division of the Department of Defense with a posting date of August 2, 2026, and a response deadline of August 10, 2026. The solicitation number is unavailable, and the North American Industry Classification System code is listed as NA, indicating incomplete or unassigned industry classification. No set-aside type or description is provided, and details regarding the organization type and point of contact are missing. The place of performance is listed as FPO with a ZIP code of 96672, suggesting a military post office location. The prime contract details could not be retrieved due to a configuration error, which has prevented the decomposition of the opportunity into any sub-opportunities. The procurement is accessible through a public link on the DIBBS system, but no further procedural or technical specifications are available within the provided data.

POSTED

DEADLINE

Packaging, Labeling, and Shipping LogisticsThe contract requires the proper packaging, labeling, and shipment of precision bolts to the DLA Distribution Depot in New Cumberland, Pennsylvania, with strict adherence to MIL-STD-129 standards for labeling and logistical documentation. All materials must be conditioned and secured to ensure integrity during transport and meet military-grade specifications for handling and storage. The contractor must also implement WAWF-compatible invoicing procedures to ensure seamless financial processing and compliance with Department of Defense financial systems. The work falls under NAICS code 531070, indicating it is a subcontract tied to transportation and warehousing logistics for defense supply chains, and the response deadline is August 10, 2026, with the solicitation posted on August 2, 2026. Performance is specifically assigned to the New Cumberland location, with a ZIP code of 17070-5002, and the contracting organization is part of the Aviation Supply Chain under the Department of Defense.

POSTED

DEADLINE

Precision Machine Bolt Manufacturing and SupplyThe contract pertains to the manufacture, packaging, labeling, and delivery of ten precision machine bolts identified by NSN/Part Number 5306-01-417-5781, with strict adherence to MIL-SPEC standards and regulatory compliance including the Berry Amendment and ITAR/EAR requirements. All work must be performed in full alignment with U.S. defense procurement mandates, ensuring that materials and production processes originate domestically and meet stringent export control protocols. The components are critical to military aviation systems and must be produced under controlled conditions to guarantee dimensional accuracy, material integrity, and traceability from raw material to final delivery. The contract is classified as a subcontract under the NAICS code 332112 and is issued by the Department of Defense through the Aviation Supply Chain office, with performance required at a designated facility in New Cumberland, Pennsylvania, ZIP 17070-5002. The solicitation was posted on August 2, 2026, and responses are due by August 10, 2026, indicating a tight turnaround for qualified suppliers to submit proposals. While no set-aside designation is specified, all bidders must demonstrate capability in meeting federal defense manufacturing standards and provide evidence of compliance with export control laws and domestic sourcing mandates. Delivery timelines, packaging specifications, and labeling protocols will be closely scrutinized to ensure seamless integration into military logistics systems.

Nonferrous Forging

POSTED

DEADLINE

Solicitation # SPE4A1-26-T-2504

The contract solicitation SPE4A1-26-T-2504 is for the procurement of 25 units of a BOLT, HOOK with NSN 5306-01-503-9383, at a unit price of $25.00, for a total contract value of $625.00. Delivery is required within 20 days after order placement, with a specified original delivery date of July 27, 2026, and the item must be delivered FOB destination to USS MAKIN ISLAND LHD 8 at FPO AP 96672. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under applicable sampling standards, primarily MIL-STD-1916 or ASQ H1331, requiring acceptance of the entire sample lot with no defects unless otherwise directed. All packaging must adhere to ASTM D3951 and be palletized per DLA’s RP001, while labeling and marking must strictly follow MIL-STD-129, including 2D Data Matrix barcodes, with Government identification removed from non-accepted items per RQ011 and bare item marking required per RQ017. The DLA Master List of Technical and Quality Requirements supersedes all other specifications, including ASTM D3951, and mandates compliance with critical, major, and minor attribute classification levels. The item must be shipped using traceable freight methods, not parcel post, and transportation details must comply with DLAD PROC NOTES C19 and C20. The supplier, MCMASTER-CARR SUPPLY COMPANY, is identified by part number 98760A109, and the contract requires full compliance with applicable FAR and DFARS clauses including cybersecurity safeguards under 252.204-7012, prohibition of hexavalent chromium under 252.223-7008, restrictions on covered telecommunications equipment under 252.204-7018, and compliance with hazardous material labeling per 29 CFR 1910.1200 and DFARS clauses. Offerors must possess a valid Unique Entity ID and CAGE code, self-certify their small business status if applicable, and disclose any joint ventures. Invoicing must be submitted through WAWF, and the contract includes clauses addressing

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Solicitation # SPE4A1-26-T-2505

The contract pertains to the procurement of 10 machine bolts with NSN/Part Number 5306-01-417-5781 under solicitation SPE4A1-26-T-2505, issued by the Department of Defense through the Aviation Supply Chain office. The delivery is due within 192 days after order, and responses must be submitted by August 10, 2026. Technical data associated with this item is subject to export control under either ITAR or EAR, meaning any disclosure to foreign persons—regardless of location—requires prior authorization from the Department of State or Commerce. Access to this controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD training on handling export-controlled technical data and have been formally approved by DLA. DFARS 252.225-7048 governs compliance with these restrictions, which apply uniformly to all entities, including U.S. companies and their foreign subsidiaries. The point of contact for inquiries is Jade Stringfield, reachable via email or phone, with performance located in New Cumberland, Pennsylvania.

Nonferrous Forging

POSTED

DEADLINE