Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

This Subcontract opportunity from Department Of Defense was posted on December 4, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Hazardous Material Management & Abatement

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 562910
New
SLED
REBID: Sink Undercoating Abatement
Solicitation # COC-RWR-FY26-31100A
The City of Cambridge is soliciting bids for the removal of approximately 41 classroom sinks with asbestos-containing undercoatings at the former Kennedy-Longfellow School located at 158 Spring Street and Ahern Field. The scope of work requires the establishment of regulated mini-enclosures and the maintenance of engineering controls to perform abatement in accordance with the project Asbestos Work Plan and applicable federal and state regulations. Faucets must be removed as a complete unit with the sinks, and all work must be performed while the school remains unoccupied. The project must be completed within two months of the Notice to Proceed, with work commencing within seven days of said notice. Contractors must adhere to strict waste packaging and labeling standards, including the use of leak-tight locking containers lined with 6-mil poly sheeting and transport in sealed vans with airtight barriers. Compliance with OSHA-approved safety and health training and the Americans with Disabilities Act is mandatory. Evaluation factors include the submission of three customer references from the last five years and a firm price proposal. Final acceptance is contingent upon a no visible suspect dust or debris standard, verified by third-party monitoring and clearance air sampling using Phase Contrast Microscopy or Transmission Electron Microscopy. Required financial protections include performance and payment bonds, with a 50% payment bond required for contracts exceeding $25,000, and a wage bond covering one year of gross wages for all employees.
Capital Buildings Projects

POSTED

about 19 hours ago

DEADLINE

in 20 days

AI Contract Overview

Show more

This subcontract opportunity, managed by the Department of Defense through the AEDC Pkp Procurement Branch, focuses on the identification, handling, and abatement of hazardous materials. The scope of work specifically covers the management of asbestos, lead, and ozone-depleting substances during demolition and construction activities. All operations must strictly adhere to EPA regulations and AEDC SHE standards to ensure environmental safety and regulatory compliance. The project will be performed in Coopertown and falls under NAICS code 562910. Interested parties must submit their responses by the deadline of December 19, 2025, at 5:00 PM. This contract ensures that all hazardous materials are properly mitigated to maintain a safe working environment throughout the construction process.

General Info

NAICS

562910 - Remediation Services

Place of Performance

COOPERTOWN, TN, USA

Set-Aside

NONE

Documents

This scope was carved out of FA9101-25-R-FARMIII-Special_Notice.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Facilities Acquisitions for Restoration and Modernization (FARM) III

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA9101 Aedc Pkp Procrmnt Branch
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Identification, handling, and abatement of hazardous materials (asbestos, lead, ODS chemicals) during demolition and construction. Includes compliance with EPA regulations and AEDC SHE standards.

More opportunities from Department Of Defense → FA9101 Aedc Pkp Procrmnt Branch

Same awarding agency

NAICS: 332996
New
Federal
Large Diameter Flex Duct Bellows
Solicitation # FA9101LDFDB
The Department of Defense, through the Arnold Engineering Development Complex at Arnold AFB, Tennessee, has issued a Sources Sought Notice to identify capable businesses for the procurement of two new, fully functional Large Diameter Flex Duct Bellows Assemblies. These assemblies must feature a 45.315-inch internal diameter and be fabricated from silicone-coated 1523 fiberglass with a 6-ply body and a nominal thickness of 0.12 inches. The technical requirements specify a working pressure of 30 psid internal and 15 psid external, with an operational temperature range from -60°F to +450°F. Fabrication must adhere to EJMA Standards, ASME Boiler and Pressure Vessel Code, and Drawing RJ632279.18, with welds inspected per AWS D1.1. Refurbished or remanufactured parts are strictly prohibited. The contractor is responsible for all materials, labor, equipment, and transportation, including the provision of supports, cribbing, tie downs, and weather protection to ensure safe delivery to Arnold AFB. Required deliverables include a comprehensive documentation package consisting of visual, weld, and pressure test inspection reports, axial spring rate calculations, and a standard manufacturer warranty. Assemblies must undergo hydrostatic testing to 45 psig at 70°F. Interested respondents must submit their company information, SAM Unique Entity Identifier, Cage Code, business size, and a tailored capability statement to the designated points of contact by November 19, 2026.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

3 days ago

DEADLINE

in 6 days
View Details
NAICS: 332912
Federal
Tunnel 9 Pitch Upgrade
Solicitation # FA9101T9PU
The Arnold Engineering Development Complex (AEDC) requires the comprehensive modernization of a high-performance hydraulic motion system for Tunnel 9 located in Silver Spring, Maryland. This 100% Small Business Set-Aside is a Firm-Fixed-Price contract encompassing the design, engineering, procurement, off-site fabrication, pre-assembly, on-site demolition, installation, and commissioning of core system components. Key hardware requirements include a primary control valve with a step response time of 55 ms or less, a main actuating cylinder with a 120.5-inch working stroke capable of 13 ft/s linear speed, a Hydraulic Power Unit (HPU), and a dedicated filtration and cooling kidney loop. All components must adhere to ASME B31.1, ASME BPVC VIII, and ISO 4406 standards, with specific requirements for near-vacuum environment reliability and compatibility with DTE-26 Ultra hydraulic oil. The project is structured into three distinct phases: Engineering Design, Part Procurement and Pre-assembly, and Demolition, Installation, and Commissioning. The total period of performance is 46 weeks from the lead time event. Award will be based on a combination of technical capability, past performance on similar hydraulic systems, and price reasonableness. Contractors must meet CMMC Level 1 (Self) cybersecurity requirements and possess the ability to handle Controlled Unclassified Information (CUI). Rigorous quality controls are mandated, including hydrostatic pressure testing, live performance demonstrations witnessed by AEDC, and strict adherence to MIL-STD-130 and MIL-STD-129 for item marking and shipment. Payment will be processed electronically via the Wide Area WorkFlow (WAWF) system.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

7 days ago

DEADLINE

in 27 days
View Details
NAICS: 333517
Federal
Large CNC EDM Sinker
Solicitation # FA9101_LARGE_CNC_EDM_SINKER
The Department of Defense, through the Arnold Engineering Development Complex (AEDC) at Arnold Air Force Base, Tennessee, has issued a Sources Sought Notice to identify capable small and large businesses for the procurement of a new, fully functional Large CNC EDM Sinker. This requirement strictly prohibits the use of refurbished or remanufactured parts. The selected contractor must provide all materials, labor, and equipment to deliver the machine FOB Arnold Air Force Base, with a required delivery timeline of four months from the receipt of order. The scope includes installation at the Model Shop in Building 451, supervised by factory-trained servicemen, and the provision of two days of formal training for three individuals on machine controls and operation. Technical specifications require the machine to be built to NFPA 79 standards and compatible with a 480V, 3PH, 60 HZ power system. Post-delivery, the contractor must perform functional accuracy tests according to ISO/ANSI standards, ensuring repeatability and positioning within +/- .0001”. The contract includes a 24-month warranty on materials and workmanship, a ten-year accuracy guarantee on the Linear Drive System, and strict support requirements, including a 36-hour on-site repair response time and 48-hour delivery for repair parts. Interested respondents must submit company information, SAM data, a capabilities statement, a rough-order-of-magnitude budgetary estimate, and a projected delivery schedule by November 13, 2026.
Machine Tool Manufacturing

POSTED

8 days ago

DEADLINE

in about 5 hours
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS